The "dim spots that represent nothing" feature drove the dimming with getRowStyle
and called api.redrawRows() on EVERY spotStatus update to re-apply it — a full
grid re-render on a firehose of status updates, which pegged the CPU on a busy
cluster (reported as PCs slowing down since 0.23.6). Move the dimming to a
defaultColDef cellClassRules ('opacity-40') that the existing light
refreshCells({force:true}) re-applies; drop redrawRows and getRowStyle.
The Ctrl+↑/↓ keyboard-nav useEffect sat AFTER `if (!range) return`, so on a band
with no range — e.g. a spurious 33 cm frequency briefly reported by an Icom over
CAT — the component returned before that hook and the hook count changed between
renders, crashing the whole window with React #300. Moved the effect above the
early return; lo/hi already fall back to [0,1] when there's no range.
A spot whose entity/band/mode is already worked, whose callsign isn't in the log,
and that carries no POTA/county/prefix novelty is dimmed (whole row, opacity) so
the eye skips it. "Nothing" follows the status, which already obeys the "same
slot" option and digital grouping. getRowStyle drives it; the spot-status effect
now redrawRows so the dimming re-applies when a status lands.
The WORKED filter also matched the entity status 'worked' (entity/band/mode
already worked, shown as a plain "—"), so selecting WORKED still listed spots of
calls never worked. Match the 'worked' key only via worked_call (the blue
WKD-CALL flag); a worked call still shows under NEW BAND / NEW SLOT.
The filter logic already matched worked_call spots against a 'worked' key; add
the chip to the status row so worked spots can be shown or isolated, not only
dropped via the "Hide worked" checkbox.
New DX Cluster setting (Settings → DX Cluster). Off (today's behaviour) a call
worked anywhere reads as already worked; on, the WORKED-call flag needs the same
band AND mode. It folds through the digital-mode grouping (Settings → General):
grouped, a 20m FT8 contact also marks a 20m FT4 spot worked; ungrouped they are
separate slots. Backend: qso.WorkedCallSlotKeys builds CALL|band and
CALL|band|mode(grouped) keys; ClusterSpotStatuses uses them when the option is on
(a spot with no inferable mode falls back to same-band).
Five operator-requested items:
- Alt+W clears the QSO entry. Handled before the `typing` guard and above
the keyer's key routing, so there is always one key that clears whatever
else is running — Esc is not that key when the CW keyer reserves it.
- The Grid box no longer pops outside the entry panel on a narrow window.
Row 2 needed 300+130+76+gaps = 538 px inside a panel whose min-width is
520, so Grid was pushed out and clipped at every narrow width, not just
extreme ones. QTH's min-width drops to 80 and the row wraps rather than
overflowing if it ever still can't fit.
- Selecting a QSO in the log now drives the Stats (F1) matrix. Uses its own
WorkedBefore call into separate state, NOT runWorkedBefore: that one owns
the entry form's wbRef and can trigger a field backfill, which browsing
the log must never do. The entry form wins whenever it holds a call.
- Clicking a coloured band/mode square lists the contacts behind it. Returns
the exact callsign AND the rest of the entity, because that pair is what
the cell's colour encodes; the call's own QSOs are bolded. The DXCC arm
matches the stored dxcc column only — reconstructing it from the callsign
here would disagree with the matrix above, which is built from that column.
- The Awards DXCC list shows each entity's primary prefix in its own sortable
column. Derived live from cty.dat into Ref.Group rather than stored on the
reference row, so an existing installation needs no re-seed.
Two ways a bogus contact could be logged:
- Enter in the TX/RX frequency field bubbled to the entry container's
onKeyDown, which calls save() on Enter-in-an-input. Typing a frequency and
pressing Enter tuned the rig AND logged the QSO. The freq fields now
stopPropagation so Enter only tunes.
- WSJT-X/JTDX broadcasts its DX-call field over UDP; when it holds a bare
number ("1"), applyUdpCall dropped it into the callsign, and the next Enter
logged a QSO with callsign "1". Reject any DX call with no letter.
Removed the long explanatory hints under the Kenwood COM/baud/host, data-mode,
CAT-trace and PTT-hotkey fields; shortened the CAT-sharing hint to just the
client setup line; and replaced the DTR/RTS hint with a one-liner. Less clutter
in the CAT settings.
1 MB (~6500 lines) fetched, split and re-rendered every second made the window
lag. 512 KB (~3200 lines) keeps a useful backlog — double the original 256 KB —
while staying responsive.
The viewer fetched only the last 256 KB (~1600 lines) of opslog.log. During a
busy trace the oldest lines scrolled out of the window while the operator was
still reading them. Raise the tail to 1 MB (~6500 lines); the backend already
allows up to 4 MB.
The LoTW/QRZ confirmation download ran on the app-lifetime context, so it
kept going after the QSL Manager was closed and a new download didn't stop the
previous one. A slow QRZ sync therefore bled its "flag cleared" log into a
freshly started LoTW download — the operator saw QRZ activity during a LoTW
run. Now each download gets a cancellable context: starting one cancels the
previous, closing the window cancels it (CancelConfirmations), and the parse
loops bail promptly on cancel. (A LoTW http 503 is separate — ARRL's server.)
The keyer panel synthesised a "connected" status for the icom/flex/yaesu
rig engines but not kenwood, so the Kenwood/Elecraft engine fell back to the
(disconnected) WinKeyer hardware status and always showed "not connected"
even though its CAT link was up.
No single Kenwood mode digit fits every rig for a data mode: a K3/K4 wants
DATA (MD6), a TS-590SG/TS-990S data mode is a USB modifier set on the rig,
and MD6 on a plain Kenwood is FSK/RTTY. So the operator now chooses in
Settings → CAT: USB (default), DATA (MD6), or leave the rig's mode unchanged.
Only soundcard/data modes (FT8, PSK, JT…) follow this; RTTY/FSK stays its own
native mode, and voice/CW are untouched (isKenwoodDataMode + test).
The frontend engine loader had no "kenwood" case, so a saved engine of
"kenwood" fell through to the WinKeyer default — the Kenwood/Elecraft
CW-over-CAT engine never ran even though the setting showed it selected.
Also clarify the Kenwood data-mode comment: there is no single mode digit
right for both a K3 (DATA=MD6) and a TS-590SG (MD6=FSK), so data stays on
USB as the safe common base; a rig-specific DATA mode is a follow-up.
- PGXL: remote AUTH password; direct-link meter fallback (VITA-first) with
250 ms poll + peak-hold; fan mode uses bare "fanmode=" (was ignored).
- TCI: spot colour sent as decimal ARGB (ExpertSDR dropped the hex string);
spot click handled via CLICKED_ON_SPOT / RX_CLICKED_ON_SPOT to fill the entry.
- FlexRadio: clicking an OpsLog spot on the panadapter now applies the mode too.
- Filter presets: the trash icon deletes again (Radix pointer-down intercept).
- PTT hotkey: keys over CAT when a backend is active (was hijacked by a stale
Audio-tab RTS/DTR serial setting); AltGr keys allowed; presses logged.
- CW macro <LOGQSO>: logs after the preceding CW is sent, not on the first letter.
Settings -> Rotator is now a list like the amplifiers: add/remove rotors,
mix PstRotator / Rotator Genius / ARCO, and a Rotator Genius can drive both
its ports (one entry = two rotors). The compass gains a rotor selector, and
a per-rotor motorized-antenna flag so the boom/pattern paths show only for
the rotor carrying the Ultrabeam/SteppIR.
Also in this batch: a keyboard PTT hotkey (hold-to-talk or toggle, reusing
the audio PTT method with a CAT fallback), and TCI spot push to the
panadapter with click-to-fill of the callsign.
The 0.22.7/0.22.8 breakage came from a Xiegu-reported fault being fixed
inside the Yaesu and Kenwood backends. The lesson is structural: nothing
a backend does may be steered by another backend's report or another
backend's setting.
The lower-lines checkbox introduced for 0.22.9 was still one shared key
applied to both Yaesu and Kenwood — the same reflex in miniature. It is
now cat.yaesu.low_dtr_rts and cat.kenwood.low_dtr_rts, each checkbox in
its backend's own settings block, each wired only to its backend. The
shared key never shipped, so nothing needs migrating.
The rig-panel sliders take a non-passive wheel listener and acted on
hover, so scrolling the panel fed the gesture to whichever control sat
under the cursor — RF power included, mid-QSO. An operator scrolling to
read the bottom of the panel could change his transmit power without
touching anything.
They now require focus, i.e. a deliberate click on that slider first.
Without it the event is left alone and the panel scrolls, which is what
the operator meant. Same fix on the Flex and Yaesu panels, which share
the pattern.
This is a fault in its own right. It is NOT an explanation for the
"transmit power moves since 0.22.8" report: that release changed nothing
in the Icom path, and this behaviour is older than it.
Both defaults break someone. 0.22.7 lowered the lines on Yaesu and
Kenwood and silenced a TS-990 whose interface needs RTS raised to
transmit; 0.22.8 stopped lowering them and an FT8 station reported its
output power wandering, cured by closing OpsLog — Windows raises both on
open and the interface reads one as PTT.
So it is now a checkbox on those two backends, off by default: that is
how they behaved before any of this. Xiegu keeps lowering them
unconditionally (its own report, its own explicit keying setting), and
the CI-V backend keeps the behaviour it has always had.
Selecting CW showed FT8 and SSB contacts. The filter ran client-side over
the reference list and nothing else, so a reference kept because it had
one CW contact still displayed the band cells it earned on SSB, still
counted its SSB confirmations, and opening it listed every contact
regardless of mode.
The class now narrows the log BEFORE the engine runs, so the bands, the
totals and the confirmations all describe the selected mode, and
AwardCellQSOs takes the same class. The panel cache is keyed by
"CODE|MODECLASS" — one key per award showed the previous mode's numbers
after switching.
The snapshot is cached by log revision, so this costs a matching pass and
no database read.
The Main tab was a fixed 50/50 grid, but a map and a cluster list want
very different widths and which one deserves the room changes with what
the operator is doing.
The share is clamped to 15..85: a pane can be made small but never
dragged out of existence, because recovering from that would mean
grabbing a divider no longer on screen. Double-click restores even.
The drag uses pointer capture on the divider — without it Leaflet
swallows the moves as soon as the cursor crosses the map. Persisted
through writeUiPref, so it travels with data/ like the other UI prefs.
The cluster already answers this question for a spot; the entry panel did
not answer it for the station actually being worked. A county hunter
needs to know before the QSO ends — by the time the county shows up in
the awards table the station is long gone.
qso.CountyWorked asks about one county instead of loading the whole
worked set, narrowed to the state so it stays a few dozen rows on a
remote MySQL. It compares through award.USCountyKey on both sides rather
than in SQL, because logged spellings vary ("Los Angeles" against
"LOS ANGELES, CA") and that key function is what resolves it everywhere
else.
An empty or non-US county is not "new" but unknown, and shows nothing: a
badge on a guess is worse than no badge.
Radix gives the content element focus when a tab is selected, so the
focus-visible ring fired on an ordinary click and outlined the whole
lower pane — visible as an orange rule under the tab strip. A tab panel
is a container; the controls inside it carry their own focus styling.
At two grid columns the labels wrapped onto a second line, which set the
row height for everything beside them. The unit is obvious from the
neighbouring DXCC # field and the numbers themselves.
Six equal columns gave a US county name the same width as a two-digit CQ
zone: the county truncated while the zones, the prefix and the DXCC
number sat mostly empty. The row is twelve columns now, spans set per
field.
The bearing and the two distances are read-only and never exceed
"12345 km", so they move to a flex row at a fixed width and the address —
the one field here that was never wide enough — takes the remainder.
The award editor's Test tab matched DK2FJ on its OR rule "qth / exact"
and reported the two Aachen DOKs as ambiguous. The F3 panel, on the same
contact, showed nothing — it builds its own QSO for ComputeQSOAwardRefs
and that object carried address, state, county, zones and continent only.
Any award keyed on the town could not fire there, so live detection was
silently blind to a whole class of awards and the operator only saw them
after logging.
It now passes the entry-strip text as well: QTH, name, country, comment,
note and grid.
The refusal to guess was only visible in the award editor's test tab and
in the awards table — both of them places an operator goes long after the
contact is over. It has to appear while the station is still in front of
you, so ComputeQSOAwardRefs now reports the candidates it declined to
assign and the F3 panel lists them as buttons: click one and it is
written to award_refs, replacing any sibling picked for that award.
They are never auto-added — adding one would be exactly the guess the
setting exists to refuse.
Also: the dark-theme fix for the native calendar glyph named only
input[type=date], so date-time fields kept an invisible icon. All the
temporal input types now share the rule.
Two DARC DOKs are both called "Gießen" — two clubs share the town. Exact
matching finds both and both are right as far as the matcher can tell, so
it kept both and the operator got a QSO credited to a DOK that may well
have been the other one.
Picking one is not an option: it writes a reference into the log with no
evidence behind it. So a Def can now be marked one reference per QSO, and
an ambiguous match on such an award assigns none, names the candidates in
the trace and leaves the contact under missing references — where the
operator's choice now sticks (06e3437).
Off by default, and deliberately NOT a revival of the old `Multi` flag: a
field holding several references (an n-fer POTA activation, a VUCC grid
line) is several references, correctly, and stays that way.
Reported on the DARC DOK award, with DL2FDM: a German address matches two or
three DOKs, the operator deletes the wrong ones and assigns the right one, and
the next recompute puts the wrong ones straight back.
The manual reference was APPENDED to what the matcher found. Storage already
kept exactly one manual entry per award — setOverrideRef drops the previous one
— so it was an override everywhere except at the one place it mattered. The
operator was arguing with the matcher and could not win.
It now replaces. The trace records what was superseded, so a corrected QSO can
still be explained rather than being merely different. A QSO with no correction
keeps every automatic reference, which the test also pins: an override must not
quietly disable matching for everyone else.
This does not address the over-matching itself — an address containing "Berlin
Mitte, 10115 Berlin" genuinely matches two DOK descriptions. That is the next
question, and a separate one.
I took the callsign field's extra width from the RST pair, on the assumption
that five characters was the most they would ever hold. A signal report of
"59+30" is exactly five characters plus its padding, and it was clipped.
The RST fields are back to their original width. The callsign keeps its extra
room — the row has space for both.
Reported on a Xiegu G90. With the blue programming cable — three wires, no
modem lines — CAT works perfectly. Behind a DE-19, which carries audio, CAT and
PTT, the radio went into transmit the moment OpsLog connected and stayed there.
Windows raises DTR and RTS when a serial port is opened, and the DE-19 reads
them as PTT; Xiegu's own documentation asks for both low. The CI-V backend has
dropped them since it was written, for the same reason on Icom rigs with USB
SEND mapped to a line. Xiegu, Yaesu and Kenwood did not. They do now.
The second half of the report: WSJT-X through OpsLog's rigctld decoded fine and
never transmitted. Nothing was broken in that chain — set_ptt reaches the
backend, which sends the CI-V PTT command, which a G90 ignores. That is why
Xiegu keys on a hardware line instead. The backend can now do that: Settings →
CAT → Xiegu → how the rig is keyed (CI-V / RTS / DTR).
Untested here — no G90 in reach. The operator who reported it offered to try.
A panadapter shot settles it: answering an S5 station, the replayed recording
goes out several times wider and taller than the station being answered — in WAV
as well as MP3, so this is not the encoder.
One setting served two sources that have nothing in common. A voice-keyer
message is a microphone at speaking distance and legitimately wants 195%; a QSO
recording is a receiver's line output, which is far hotter. The same 195% put it
into the transmitter flat out, ALC pinned, noise and voice alike.
The QSO playback now has its own level, defaulting to 100%. The voice keyer
keeps the setting it had, so nobody's F-key messages change.
Reported again after the monitor was wired up: 300% still sounded like 10%. The
monitor fix was right but could not show, because the sliders only changed the
settings panel's own state — the value reached the audio engine when the
operator clicked Save.
A level is set by ear, by dragging. It now applies on every move, to the monitor
and to the recorder mix alike; saving still persists it. Both halves were needed
and neither works alone.
Padlocks. LockBtn was declared INSIDE the App component, so every render gave
React a new component type and the button was unmounted and rebuilt — about four
times a second while the CAT polls. It flickered under the pointer and swallowed
clicks, because the node being clicked no longer existed when the click landed.
The padlock now lives at module level and is passed its state.
From-radio level. It reached the QSO recorder and nothing else, so an operator
listening through OpsLog heard no difference between 10% and 150% — the control
was not weak, it was disconnected. It now scales the monitor too, applied on the
captured chunk so the network-fed path keeps its own levels, and a running
monitor picks up a change immediately: making someone restart the monitor to
hear the slider is how a working control gets reported as broken.
Callsign field widened to w-56, the room coming from the RST pair which never
needs more than five characters. It is the one field always typed into, it
carries the REC badges, and a long portable call has to stay readable.
A second press restarted the message from the beginning. What the operator wants
there is to cut it short — enough heard, or pressed by mistake with the
transmitter keyed — and then to be able to send it again at once.
It now shows a stop square while playing and releases the PTT through the same
path the natural end uses, so nothing is left keyed. Together with the device
handover fixed a moment ago, sending again immediately afterwards works.
The grid already badges them; only the filter was missing.
They are not entity statuses — a new park or county is another dimension of the
same spot — so the filter key is now a superset of the status, and matching is
an OR across all of them, as it already was for a previously-worked callsign.
The chips carry the colours their badges use in the grid: a filter that does not
look like what it selects has to be learned twice.
rouggy