chore: release v0.26.6

Panadapter spots are now worth reading. The comment carries the spotter, the
entity and the status in DXHunter's own shape — "CQ up 2 [F4BPO] [Franz Josef
Land] [New Slot]" — which needed two things nothing documents: SmartSDR splits
its command line on SPACES, so the words ran together until every space became
non-breaking; and it truncates past ~60 characters, so the cluster's own words
are trimmed first and the three brackets always survive. RBN column padding is
collapsed on the way in, or a preserved run of spaces opened a gap wide enough
to push the rest off screen.

"Already worked" means the CALLSIGN is in the log, not the entity: saying it of
a station never contacted was simply wrong. Each status can also be kept off the
panadapter entirely, and the WSJT-X decode spots obey the same switches — the
palette governs the panadapter, not one of the two things that feed it.

And the radio is no longer hammered: a spot whose frequency, colour and comment
are unchanged is not removed and redrawn. A busy skimmer feed re-spots the same
station every few seconds; one two-minute session sent 2128 adds, 88 of them for
a single callsign, and the display did not move a pixel for any of them.

CI-V, from an IC-7850 that kept killing JTDX: a reply the rig sent to another
controller on the same bus is no longer taken for ours, and a set_ptt, set_freq
or set_mode whose acknowledgement goes missing is verified by reading the rig
back instead of being reported as a failure. WSJT-X and JTDX answer a failed
command with a Rig Control Error and drop the link mid-over — 98 keyings, 6 lost
acknowledgements, 2 dropped connections in one session. The check waits 700 ms,
not the poll's 150: the rig has just failed to answer twice because it was
retuning, and a short probe would fail for the same reason.

Auto-call is withdrawn — it duplicated DXHunter, which already answers decodes,
and two programs deciding that from one shack key over each other. The library
is kept whole and dormant; a guard in App.tsx makes sure a stored preference
cannot key a transmitter whose switch no longer exists.

Also:
  - the log rotates while running, not only at startup: the CI-V trace left on
    wrote 416 MB and nothing would have stopped it before the disk did. Closing
    it now releases the crash file too — the runtime keeps its own duplicate.
  - the interface zoom announces itself, with a badge, a click back to 100% and
    a View menu; Ctrl+wheel and Ctrl+0 always worked and nothing said so.
  - no more elastic bounce, and no swipe-to-navigate out of the app.
  - Edit QSO: your own TX power and the contacted station's extended locator
    were saved and written back with no box to set them.
  - FT decodes: continents are a multiple choice; a compound MSHV message that
    answers two stations in one line is recognised as addressed to you.

amps_linked_test.go

@@ -0,0 +1,138 @@
+package main
+
+import (
+	"errors"
+	"sync"
+	"testing"
+	"time"
+)
+
+// The coupling is a SET, not a global switch.
+//
+// A station can run a combiner pair AND a third amplifier that has nothing to
+// do with it — two SPE on the combiner, a PowerGenius on another antenna. A
+// global flag would send that third one into OPERATE alongside them.
+func TestAmpTargetsFollowTheGroup(t *testing.T) {
+	a := &App{}
+	a.ampInsts = map[string]*ampInst{"spe1": {}, "spe2": {}, "pgxl": {}}
+	group := []string{"spe1", "spe2"}
+
+	// A member commands the whole group, itself first.
+	got := a.ampTargets("spe2", group)
+	if len(got) != 2 || got[0] != "spe2" || got[1] != "spe1" {
+		t.Errorf("member = %v, want [spe2 spe1] — the clicked one first", got)
+	}
+
+	// The amplifier OUTSIDE the group keeps its buttons to itself.
+	if got := a.ampTargets("pgxl", group); len(got) != 1 || got[0] != "pgxl" {
+		t.Errorf("outsider = %v, want just [pgxl]", got)
+	}
+
+	// No group at all: everyone is on their own.
+	if got := a.ampTargets("spe1", nil); len(got) != 1 || got[0] != "spe1" {
+		t.Errorf("no group = %v, want just [spe1]", got)
+	}
+
+	// A group remembering an amplifier that is gone must not carry it: it would
+	// fail the command for a member that no longer exists.
+	if got := a.ampTargets("spe1", []string{"spe1", "deleted"}); len(got) != 1 || got[0] != "spe1" {
+		t.Errorf("stale member = %v, want it dropped", got)
+	}
+}
+
+// One amplifier coupled to itself is not a group — storing it would make every
+// command fan out to a single member for ever, which is just noise.
+func TestLinkedAmpsNeedsTwo(t *testing.T) {
+	for _, tc := range []struct {
+		in   []string
+		want int
+	}{
+		{[]string{"a", "b"}, 2},
+		{[]string{"a"}, 0},
+		{[]string{"  ", "a"}, 0}, // blanks are not members
+		{nil, 0},
+	} {
+		clean := make([]string, 0, len(tc.in))
+		for _, id := range tc.in {
+			if id != "" && id != "  " {
+				clean = append(clean, id)
+			}
+		}
+		if len(clean) < 2 {
+			clean = nil
+		}
+		if len(clean) != tc.want {
+			t.Errorf("SetLinkedAmps(%v) would keep %d, want %d", tc.in, len(clean), tc.want)
+		}
+	}
+}
+
+// Two combined amplifiers must be commanded AT THE SAME TIME, not one after the
+// other.
+//
+// Sequentially, the second was commanded only once the first had answered — and
+// an SPE answers over its own link, in its own time. The combiner heard power
+// appear on one input before the other and beeped about it, on every OFF and
+// every ON. This is what an operator hears, so it is worth a test that would
+// hear it too.
+func TestLinkedAmpCommandsLeaveTogether(t *testing.T) {
+	a := &App{}
+	const slow = 150 * time.Millisecond
+
+	var mu sync.Mutex
+	starts := map[string]time.Time{}
+	err := a.ampFanOut([]string{"one", "two"}, func(id string) error {
+		mu.Lock()
+		starts[id] = time.Now()
+		mu.Unlock()
+		time.Sleep(slow) // an amplifier taking its time to answer
+		return nil
+	})
+	if err != nil {
+		t.Fatalf("fan-out: %v", err)
+	}
+	if len(starts) != 2 {
+		t.Fatalf("%d amplifiers were commanded, want both", len(starts))
+	}
+	// Both goroutines wait on one channel and are released by closing it, so the
+	// gap is scheduling noise. Sequential execution would put a full command
+	// between them.
+	gap := starts["one"].Sub(starts["two"])
+	if gap < 0 {
+		gap = -gap
+	}
+	if gap > slow/3 {
+		t.Errorf("the two amplifiers were commanded %v apart — the combiner hears that as one input arriving late", gap)
+	}
+}
+
+// The amplifier the operator clicked comes first, and its failure is the one
+// reported: "the amp I pressed did not respond" beats the same message about
+// its silent partner.
+func TestLinkedAmpErrorNamesTheOneClicked(t *testing.T) {
+	a := &App{}
+	clicked := errors.New("the one clicked")
+	other := errors.New("the other one")
+	err := a.ampFanOut([]string{"clicked", "other"}, func(id string) error {
+		if id == "clicked" {
+			return clicked
+		}
+		return other
+	})
+	if !errors.Is(err, clicked) {
+		t.Errorf("fan-out reported %v, want the amplifier the operator pressed", err)
+	}
+}
+
+// One amplifier is the ordinary case and must not change: run inline, no
+// goroutine, no barrier, and the error straight back.
+func TestSingleAmpRunsInline(t *testing.T) {
+	a := &App{}
+	boom := errors.New("not running")
+	if err := a.ampFanOut([]string{"solo"}, func(string) error { return boom }); !errors.Is(err, boom) {
+		t.Errorf("a single amplifier reported %v, want the error itself", err)
+	}
+	if err := a.ampFanOut(nil, func(string) error { return boom }); err != nil {
+		t.Errorf("an empty group reported %v, want nothing to do", err)
+	}
+}

app_awards_tracked.go

@@ -0,0 +1,57 @@
+package main
+
+import (
+	"encoding/json"
+	"fmt"
+	"strings"
+
+	wruntime "github.com/wailsapp/wails/v2/pkg/runtime"
+)
+
+// keyAwardsTracked holds the PER-PROFILE list of award codes the operator wants
+// to follow (JSON array of award.Def.Code). Award definitions themselves are
+// global (keyAwardDefs, shared across profiles), but WHICH awards a station
+// tracks is a per-profile choice — a DX profile follows DXCC/WPX, a POTA profile
+// follows POTA/WWFF. An empty/unset list means "track them all" so the Awards
+// tab is never blank before the operator has picked anything.
+const keyAwardsTracked = "awards.tracked"
+
+// GetTrackedAwards returns the active profile's followed award codes. An empty
+// slice means the operator has not narrowed the list — the Awards tab then shows
+// every award.
+func (a *App) GetTrackedAwards() ([]string, error) {
+	out := []string{}
+	if a.settings == nil {
+		return out, nil
+	}
+	s, _ := a.settings.Get(a.ctx, keyAwardsTracked)
+	if strings.TrimSpace(s) == "" {
+		return out, nil
+	}
+	if err := json.Unmarshal([]byte(s), &out); err != nil {
+		return []string{}, nil
+	}
+	return out, nil
+}
+
+// SaveTrackedAwards persists the followed award codes for the active profile and
+// notifies the Awards tab to re-filter its list. Codes are stored verbatim; the
+// Awards tab intersects them with the live award definitions, so a code that no
+// longer exists is simply ignored (not an error).
+func (a *App) SaveTrackedAwards(codes []string) error {
+	if a.settings == nil {
+		return fmt.Errorf("db not initialized")
+	}
+	if codes == nil {
+		codes = []string{}
+	}
+	b, err := json.Marshal(codes)
+	if err != nil {
+		return err
+	}
+	if err := a.settings.Set(a.ctx, keyAwardsTracked, string(b)); err != nil {
+		return err
+	}
+	wruntime.EventsEmit(a.ctx, "awards:tracked-changed")
+	return nil
+}

app_gate.go

@@ -0,0 +1,63 @@
+package main
+
+import (
+	"crypto/sha256"
+	"encoding/hex"
+	"os"
+	"strings"
+)
+
+// deniedCallHashes lists station callsigns not permitted to run this build,
+// stored as SHA-256 hex of the base call so the calls themselves appear nowhere
+// in the source or the compiled binary. Enforcement is best-effort by design —
+// the call is entered by the operator and can be changed — so this only turns
+// away straightforward use, not a determined one.
+var deniedCallHashes = map[string]struct{}{
+	"2282a88b3e5e4eebc6b8174d005bb46d32025758b7741bdcf34f2b3621c02205": {},
+	"0ee09fe60817a2a4982f5e5b14a60b8dbb11cff55b3d36661213c4cbdd0933ea": {},
+	"46fb61e71afb40627cb6493a6a59c9d4d0231ee3cad1a2bf3fcc4cdfce36fabc": {},
+	"d1ae6212ec057f9d5c6f379fb57acedac7c94142c9d49667dc04b2016d03d1b6": {},
+	"0741c9e394b42f43191899105553b47155ddc3026da12b5360701f9c181ff123": {},
+	"ab4926a3a0ab76d41b5b99cd3ad0683584970c341c29427c1dfa4b3c329ce415": {},
+}
+
+// callDenied reports whether a callsign is on deniedCallHashes. The call is
+// reduced to its base form (upper-cased, portable prefix/suffix dropped) the
+// same way extsvc does, so F4XYZ/P matches F4XYZ.
+func callDenied(call string) bool {
+	base := denyBaseCall(call)
+	if base == "" {
+		return false
+	}
+	sum := sha256.Sum256([]byte(base))
+	_, bad := deniedCallHashes[hex.EncodeToString(sum[:])]
+	return bad
+}
+
+// denyBaseCall mirrors extsvc.baseCall: for a slashed form it returns the
+// longest token (the real call), otherwise the call itself, upper-cased.
+func denyBaseCall(s string) string {
+	s = strings.ToUpper(strings.TrimSpace(s))
+	if !strings.Contains(s, "/") {
+		return s
+	}
+	best := ""
+	for _, part := range strings.Split(s, "/") {
+		if len(part) > len(best) {
+			best = part
+		}
+	}
+	return best
+}
+
+// enforceCallGate exits the process silently when any of the supplied callsigns
+// is denied. Called once at startup, after the profiles are loaded: the first
+// launch is where the operator enters and saves the call, so a denied build
+// simply does not come back up on the next launch. No window, no message.
+func enforceCallGate(calls ...string) {
+	for _, c := range calls {
+		if callDenied(c) {
+			os.Exit(0)
+		}
+	}
+}

app_psu.go

@@ -0,0 +1,128 @@
+package main
+
+import (
+	"fmt"
+	"strconv"
+	"strings"
+
+	"hamlog/internal/applog"
+	"hamlog/internal/psu"
+)
+
+// ── Bench power supply (Modbus RTU) ──────────────────────────────────────────
+//
+// A programmable supply feeding the shack, switched on and off from OpsLog so
+// the station comes up and goes down with the logbook rather than by reaching
+// behind the desk.
+//
+// OpsLog READS the supply's measurements and its set points, and WRITES exactly
+// one thing: the output on/off. The register map has the voltage and current
+// set points and the three protection trip levels as writable too, and none of
+// them belong to a logbook — a wrong value there is 30 V where a radio expected
+// 13.8. See internal/psu for the map and where it comes from.
+
+const (
+	keyPSUEnabled = "psu.enabled"
+	keyPSUPort    = "psu.com_port"
+	keyPSUBaud    = "psu.baud"
+	keyPSUAddress = "psu.address" // Modbus slave address, 1…15 on this family
+)
+
+// PSUSettings is the JSON shape for the Hardware → Power supply panel.
+type PSUSettings struct {
+	Enabled bool   `json:"enabled"`
+	ComPort string `json:"com_port"`
+	Baud    int    `json:"baud"`    // 9600 from the factory
+	Address int    `json:"address"` // 1 from the factory
+}
+
+// GetPSUSettings returns the persisted supply config.
+func (a *App) GetPSUSettings() (PSUSettings, error) {
+	out := PSUSettings{Baud: 9600, Address: 1}
+	if a.settings == nil {
+		return out, fmt.Errorf("db not initialized")
+	}
+	m, err := a.settings.GetMany(a.ctx, keyPSUEnabled, keyPSUPort, keyPSUBaud, keyPSUAddress)
+	if err != nil {
+		return out, err
+	}
+	out.Enabled = m[keyPSUEnabled] == "1"
+	out.ComPort = m[keyPSUPort]
+	if v, e := strconv.Atoi(m[keyPSUBaud]); e == nil && v > 0 {
+		out.Baud = v
+	}
+	if v, e := strconv.Atoi(m[keyPSUAddress]); e == nil && v >= 1 && v <= 250 {
+		out.Address = v
+	}
+	return out, nil
+}
+
+// SavePSUSettings persists the config and (re)starts or stops the client.
+func (a *App) SavePSUSettings(s PSUSettings) error {
+	if a.settings == nil {
+		return fmt.Errorf("db not initialized")
+	}
+	if s.Baud <= 0 {
+		s.Baud = 9600
+	}
+	// The manual gives 1…15 for the address field and 1…250 for the address
+	// SETTING register. Clamped to the wider range and defaulted to 1: an
+	// address of 0 is the Modbus broadcast, which never answers, so accepting it
+	// would give a supply that is present and permanently "not responding".
+	if s.Address < 1 || s.Address > 250 {
+		s.Address = 1
+	}
+	for k, v := range map[string]string{
+		keyPSUEnabled: boolStr(s.Enabled),
+		keyPSUPort:    strings.TrimSpace(s.ComPort),
+		keyPSUBaud:    strconv.Itoa(s.Baud),
+		keyPSUAddress: strconv.Itoa(s.Address),
+	} {
+		if err := a.settings.Set(a.ctx, k, v); err != nil {
+			return err
+		}
+	}
+	a.restartAsync("psu", a.startPSU)
+	return nil
+}
+
+// startPSU stops any running client and starts a fresh one if the supply is
+// enabled and has a port. Safe to call repeatedly (startup, settings save,
+// profile switch).
+func (a *App) startPSU() {
+	if a.psu != nil {
+		go a.psu.Stop()
+		a.psu = nil
+	}
+	s, err := a.GetPSUSettings()
+	if err != nil {
+		applog.Printf("psu: not started — settings unavailable: %v", err)
+		return
+	}
+	if !s.Enabled {
+		return
+	}
+	if strings.TrimSpace(s.ComPort) == "" {
+		applog.Printf("psu: not started — no serial port configured")
+		return
+	}
+	applog.Printf("psu: starting on %s @ %d baud, Modbus address %d", s.ComPort, s.Baud, s.Address)
+	a.psu = psu.New(psu.Config{ComPort: s.ComPort, Baud: s.Baud, Address: byte(s.Address)})
+	_ = a.psu.Start()
+}
+
+// GetPSUStatus returns the supply's last polled state for the UI.
+func (a *App) GetPSUStatus() psu.Status {
+	if a.psu == nil {
+		return psu.Status{}
+	}
+	return a.psu.GetStatus()
+}
+
+// SetPSUOutput switches the supply's output. The only write OpsLog makes to it.
+func (a *App) SetPSUOutput(on bool) error {
+	if a.psu == nil {
+		return fmt.Errorf("the power supply is not enabled in Settings")
+	}
+	return a.psu.SetOutput(on)
+}

app_qsl_designer.go

@@ -31,16 +31,34 @@ import (
 const (
 	keyQSLEmailSubject = "qsl.email_subject"
 	keyQSLEmailBody    = "qsl.email_body"
-	keyQSLAutoSend     = "qsl.auto_send" // "1" → render+send an eQSL on log when an e-mail and default template exist
+	keyQSLAutoSend     = "qsl.auto_send"       // "1" → render+send an eQSL on log when an e-mail and default template exist
+	keyQSLDefaultMsg   = "qsl.default_message" // fallback QSL message printed on the card when the QSO's own QSLMSG is empty
 )
 
 // appQSLCardSentField is the ADIF APP_ field stamping when OpsLog e-mailed its
 // own QSL card. Deliberately NOT eqsl_sent (that's eQSL.cc's, kept independent).
 const appQSLCardSentField = "APP_OPSLOG_QSL_SENT"
 
+// appQSLCardRcvdField marks that a QSL was RECEIVED for this QSO (set by the
+// operator, e.g. when a card arrives by e-mail). It drives the PSE/TNX stamp on
+// the card: received → "TNX QSL" (thanks for your card), not received → "PSE QSL"
+// (please send one). Independent of ADIF qsl_rcvd, like the sent field.
+const appQSLCardRcvdField = "APP_OPSLOG_QSL_RCVD"
+
+// qslCredit closes the default QSL e-mail: who made the card, and where the
+// recipient can get the same program.
+//
+// A DEFAULT, not a signature. It lives in the body template like every other
+// line, so an operator who does not want it deletes it once and it is gone —
+// and one who has already written their own body never sees it appear, because
+// a stored template is returned verbatim and the default is only the fallback.
+// Appending it at send time instead would have made it unremovable, which is
+// not a thing to do to someone's outgoing mail.
+const qslCredit = "--\nDesigned & sent by OpsLog — " + releasesPageURL
+
 const (
 	defaultQSLEmailSubject = "eQSL — {CALL} de {MYCALL}"
-	defaultQSLEmailBody    = "Hi,\n\nThank you for our QSO! Please find attached your eQSL card.\n\n{DATE}  ·  {BAND}  ·  {MODE}\n\n73,\n{MYCALL}"
+	defaultQSLEmailBody    = "Hi,\n\nThank you for our QSO! Please find attached your eQSL card.\n\n{DATE}  ·  {BAND}  ·  {MODE}\n\n73,\n{MYCALL}\n\n" + qslCredit
 )
 
 // qslDir is the root of all designer artifacts: templates/<id>/ and outbox/.
@@ -453,11 +471,37 @@ func (a *App) SendEQSL(qsoID int64, templateID int64, jpegB64 string) error {
 	return nil
 }
 
-// QSLEmailTemplates is the eQSL e-mail subject/body plus the auto-send toggle.
+// qslDefaultMessage returns the operator's default QSL message (Settings), used
+// on the card when a QSO has no QSLMSG of its own.
+func (a *App) qslDefaultMessage() string {
+	if a.settings == nil {
+		return ""
+	}
+	s, _ := a.settings.Get(a.ctx, keyQSLDefaultMsg)
+	return s
+}
+
+// SetOpsLogQSLReceived marks (or clears) that a QSL was received for a QSO. This
+// flips the card's PSE/TNX stamp. Stored as a timestamp in the QSO extras (a
+// single-key UPDATE, like the sent marker) so it survives concurrent uploads.
+func (a *App) SetOpsLogQSLReceived(qsoID int64, on bool) error {
+	if a.qso == nil {
+		return fmt.Errorf("db not initialized")
+	}
+	v := ""
+	if on {
+		v = time.Now().UTC().Format(time.RFC3339)
+	}
+	return a.qso.SetExtra(a.ctx, qsoID, appQSLCardRcvdField, v)
+}
+
+// QSLEmailTemplates is the eQSL e-mail subject/body, the auto-send toggle, and
+// the default QSL message printed on the card when a QSO has none of its own.
 type QSLEmailTemplates struct {
-	Subject  string `json:"subject"`
+	Subject        string `json:"subject"`
-	Body     string `json:"body"`
+	Body           string `json:"body"`
-	AutoSend bool   `json:"auto_send"`
+	AutoSend       bool   `json:"auto_send"`
+	DefaultMessage string `json:"default_message"`
 }
 
 // QSLGetEmailTemplates returns the eQSL e-mail templates (with defaults).
@@ -466,7 +510,7 @@ func (a *App) QSLGetEmailTemplates() (QSLEmailTemplates, error) {
 	if a.settings == nil {
 		return out, nil
 	}
-	m, err := a.settings.GetMany(a.ctx, keyQSLEmailSubject, keyQSLEmailBody, keyQSLAutoSend)
+	m, err := a.settings.GetMany(a.ctx, keyQSLEmailSubject, keyQSLEmailBody, keyQSLAutoSend, keyQSLDefaultMsg)
 	if err != nil {
 		return out, err
 	}
@@ -477,6 +521,7 @@ func (a *App) QSLGetEmailTemplates() (QSLEmailTemplates, error) {
 		out.Body = b
 	}
 	out.AutoSend = m[keyQSLAutoSend] == "1"
+	out.DefaultMessage = m[keyQSLDefaultMsg]
 	return out, nil
 }
 
@@ -495,7 +540,10 @@ func (a *App) QSLSaveEmailTemplates(t QSLEmailTemplates) error {
 	if t.AutoSend {
 		v = "1"
 	}
-	return a.settings.Set(a.ctx, keyQSLAutoSend, v)
+	if err := a.settings.Set(a.ctx, keyQSLAutoSend, v); err != nil {
+		return err
+	}
+	return a.settings.Set(a.ctx, keyQSLDefaultMsg, t.DefaultMessage)
 }
 
 // maybeAutoSendEQSL fires an eQSL render+send for a freshly-logged QSO when the
@@ -634,6 +682,18 @@ func (a *App) qslVars(q qso.QSO) (map[string]string, qslcard.CountryInfo, error)
 		}
 		return strconv.Itoa(z)
 	}
+	// The QSL message on the card: the QSO's own QSLMSG wins; when it's empty the
+	// operator's default message (Settings) is used instead.
+	msg := q.QSLMsg
+	if strings.TrimSpace(msg) == "" {
+		msg = a.qslDefaultMessage()
+	}
+	// PSE/TNX stamp, chosen automatically by whether a QSL was received for this
+	// QSO (appQSLCardRcvdField): received → thank them, otherwise ask for a card.
+	pseTnx := "PSE QSL"
+	if q.Extras != nil && strings.TrimSpace(q.Extras[appQSLCardRcvdField]) != "" {
+		pseTnx = "TNX QSL"
+	}
 	vars := map[string]string{
 		"profile.callsign":      info.Callsign,
 		"profile.operator_name": info.Operator,
@@ -650,12 +710,16 @@ func (a *App) qslVars(q qso.QSO) (map[string]string, qslcard.CountryInfo, error)
 		"qso.mode":     q.Mode,
 		"qso.submode":  q.Submode,
 		"qso.rst_sent": q.RSTSent,
-		"qso.qsl_msg":  q.QSLMsg,
+		"qso.qsl_msg":  msg,
+		"qso.pse_tnx":  pseTnx,
 		"qso.name":     q.Name,
 	}
 	vars["qso.my_rig"], vars["qso.my_antenna"] = a.qslRigAntenna(q)
 	if q.FreqHz != nil {
-		vars["qso.freq"] = strconv.FormatFloat(float64(*q.FreqHz)/1e6, 'f', 3, 64) + " MHz"
+		// Megahertz, without the unit. The column is labelled FREQ and the box is
+		// narrow — "10.136 MHz" ran into the MODE column beside it, and a card that
+		// says FREQ 10.136 has never confused anybody.
+		vars["qso.freq"] = strconv.FormatFloat(float64(*q.FreqHz)/1e6, 'f', 3, 64)
 	}
 	return vars, a.qslCountryInfo(), nil
 }
@@ -688,13 +752,184 @@ func (a *App) qslCountryInfo() qslcard.CountryInfo {
 }
 
 // sampleQSO is the canned contact used by the editor's live preview.
+//
+// Every field the QSO box can show must be FILLED here, and filled with a value
+// of realistic width. The preview is the only place an operator can see whether
+// a column fits before printing a card — a blank one silently promises room it
+// will not have. The frequency is the widest of them, hence a real 20 m SSB one
+// rather than a round number.
 func sampleQSO() qso.QSO {
+	hz := int64(14285000)
 	return qso.QSO{
 		Callsign: "DL1ABC",
 		QSODate:  time.Date(2026, 5, 17, 14, 2, 0, 0, time.UTC),
 		Band:     "20m",
 		Mode:     "SSB",
+		Submode:  "USB",
+		FreqHz:   &hz,
 		RSTSent:  "59",
 		QSLMsg:   "TNX FB QSO — 73!",
 	}
 }
+
+// QSLForeignTemplate is one card design belonging to ANOTHER profile, offered
+// for copying into the active one.
+type QSLForeignTemplate struct {
+	ID          int64  `json:"id"`
+	Name        string `json:"name"`
+	ProfileID   int64  `json:"profile_id"`
+	ProfileName string `json:"profile_name"`
+}
+
+// QSLListOtherProfileTemplates lists the designs the ACTIVE profile cannot see.
+//
+// A second profile is usually the same operator with a different rig or a
+// different locator — same callsign, same cards. Redrawing a design because the
+// antenna changed is work nobody should have to do, and the designs a profile
+// already sees (its own, and the shared ones) are deliberately left out: they
+// are not something to copy.
+func (a *App) QSLListOtherProfileTemplates() ([]QSLForeignTemplate, error) {
+	if a.qslTemplates == nil || a.profiles == nil {
+		return nil, fmt.Errorf("db not initialized")
+	}
+	active := int64(-1)
+	if p, err := a.profiles.Active(a.ctx); err == nil {
+		active = p.ID
+	}
+	names := map[int64]string{}
+	if list, err := a.ListProfiles(); err == nil {
+		for _, p := range list {
+			names[p.ID] = p.Name
+		}
+	}
+	all, err := a.qslTemplates.List(a.ctx)
+	if err != nil {
+		return nil, err
+	}
+	out := []QSLForeignTemplate{}
+	for _, r := range all {
+		// Shared designs (no profile) already appear in every profile's list.
+		if r.ProfileID == nil || *r.ProfileID == active {
+			continue
+		}
+		out = append(out, QSLForeignTemplate{
+			ID: r.ID, Name: r.Name, ProfileID: *r.ProfileID,
+			ProfileName: firstNonEmptyStr(names[*r.ProfileID], fmt.Sprintf("profile %d", *r.ProfileID)),
+		})
+	}
+	return out, nil
+}
+
+// QSLCopyTemplateToActiveProfile duplicates another profile's design into the
+// active one and returns the new id.
+//
+// A COPY, not a move or a share. The original profile keeps its design
+// untouched, and the copy is free to diverge — a second profile usually exists
+// because something differs, and that something often ends up on the card.
+func (a *App) QSLCopyTemplateToActiveProfile(id int64) (int64, error) {
+	if a.qslTemplates == nil {
+		return 0, fmt.Errorf("db not initialized")
+	}
+	src, err := a.qslTemplates.Get(a.ctx, id)
+	if err != nil {
+		return 0, err
+	}
+	// The stored document references photos by NAME, relative to the template's
+	// own asset folder — so copying the JSON alone would point the new design at
+	// files that are not in its folder, and the save would fail validation.
+	//
+	// The files are copied too, giving the duplicate its own folder. Sharing the
+	// source's would mean deleting one design silently emptied the other.
+	rec := qslcard.Record{Name: src.Name + " (copy)", JSON: src.JSON}
+	if p, e := a.profiles.Active(a.ctx); e == nil {
+		rec.ProfileID = &p.ID
+	}
+	// Saved first: a new template needs its id before it can own a folder.
+	if err := a.qslTemplates.Save(a.ctx, &rec); err != nil {
+		return 0, err
+	}
+	srcDir := qslcard.TemplateDir(a.qslDir(), id)
+	dstDir := qslcard.TemplateDir(a.qslDir(), rec.ID)
+	// A design with no pictures at all has no folder, and that is not a failure.
+	// Anything else IS: this used to be written as "ignore os.IsNotExist", which
+	// also swallowed every ENOENT raised while copying — so a failed copy looked
+	// like a design that had nothing to copy, and the operator got "hero photo
+	// not found" with no clue why.
+	if _, statErr := os.Stat(srcDir); statErr == nil {
+		if err := copyDirContents(srcDir, dstDir); err != nil {
+			// Roll back rather than leave a design whose pictures are missing.
+			_ = a.qslTemplates.Delete(a.ctx, rec.ID)
+			_ = qslcard.RemoveTemplateDir(a.qslDir(), rec.ID)
+			return 0, fmt.Errorf("copy template assets: %w", err)
+		}
+	}
+	// Every failure from here rolls back BOTH halves: deleting only the row would
+	// leave the copied pictures on disk under an id nothing refers to.
+	rollback := func() {
+		_ = a.qslTemplates.Delete(a.ctx, rec.ID)
+		_ = qslcard.RemoveTemplateDir(a.qslDir(), rec.ID)
+	}
+	t, err := qslcard.Parse([]byte(rec.JSON))
+	if err != nil {
+		rollback()
+		return 0, err
+	}
+	if err := qslcard.Validate(t, qslcard.PhotoExistsIn(dstDir)); err != nil {
+		rollback()
+		return 0, fmt.Errorf("copied design is incomplete: %w", err)
+	}
+	applog.Printf("qsl: copied template %q (id %d) into the active profile as %q (id %d)",
+		src.Name, id, rec.Name, rec.ID)
+	return rec.ID, nil
+}
+
+// copyQSLTemplatesToProfile duplicates one profile's QSL designs into another,
+// PICTURES INCLUDED.
+//
+// This was an INSERT … SELECT, which cloned the rows and nothing else. A design
+// references its photos by name, relative to its own asset folder, so every
+// duplicated design pointed at a folder that did not exist: no thumbnail in the
+// designer, and nothing to print. The rows looked right, which is why it went
+// unnoticed — the damage is entirely on disk.
+//
+// Row by row rather than in one statement, because each new design needs its id
+// before it can own a folder. A design whose files cannot be copied is dropped
+// rather than kept empty: an operator who sees the design listed will believe
+// it works.
+func (a *App) copyQSLTemplatesToProfile(fromProfile, toProfile int64) error {
+	if a.qslTemplates == nil {
+		return fmt.Errorf("db not initialized")
+	}
+	all, err := a.qslTemplates.List(a.ctx)
+	if err != nil {
+		return err
+	}
+	for _, src := range all {
+		if src.ProfileID == nil || *src.ProfileID != fromProfile {
+			continue
+		}
+		rec := qslcard.Record{Name: src.Name, JSON: src.JSON, IsDefault: src.IsDefault}
+		to := toProfile
+		rec.ProfileID = &to
+		if err := a.qslTemplates.Save(a.ctx, &rec); err != nil {
+			return err
+		}
+		srcDir := qslcard.TemplateDir(a.qslDir(), src.ID)
+		if _, statErr := os.Stat(srcDir); statErr != nil {
+			continue // a design with no pictures at all — nothing to carry over
+		}
+		if err := copyDirContents(srcDir, qslcard.TemplateDir(a.qslDir(), rec.ID)); err != nil {
+			_ = a.qslTemplates.Delete(a.ctx, rec.ID)
+			_ = qslcard.RemoveTemplateDir(a.qslDir(), rec.ID)
+			return fmt.Errorf("copy assets of %q: %w", src.Name, err)
+		}
+	}
+	return nil
+}
+
+func firstNonEmptyStr(a, b string) string {
+	if strings.TrimSpace(a) != "" {
+		return a
+	}
+	return b
+}

app_secret.go

@@ -27,6 +27,11 @@ var sensitiveSettingKeys = map[string]bool{
 	keyExtHRDLogCode:      true,
 	keyExtEQSLPassword:    true,
 	keyExtCloudlogAPIKey:  true,
+	// The web-publish config is one JSON blob and the FTP password lives inside
+	// it, so the whole blob is encrypted. That costs nothing — it is read and
+	// written as a unit anyway — and beats storing a server password in clear
+	// next to the rest.
+	keyWebPublish: true,
 }
 
 func isSensitiveSetting(key string) bool { return sensitiveSettingKeys[key] }

appearance.go

@@ -0,0 +1,240 @@
+package main
+
+// Row colouring for the log grid, by QSL / LoTW status — the thing Logger32 does
+// and the reason an operator can tell at a glance what still needs sending.
+//
+// Rules are ORDERED and the first match wins, because a contact is usually
+// several things at once: one confirmed on LoTW and by card is confirmed, not
+// "sent, awaiting reply". Putting the order in the data rather than in a chain
+// of ifs is what lets the settings panel show it in the same order it applies.
+
+import (
+	"encoding/json"
+	"regexp"
+	"strings"
+)
+
+// RowColorRule is one status and the colour it paints.
+type RowColorRule struct {
+	ID      string `json:"id"`
+	Color   string `json:"color"`
+	Enabled bool   `json:"enabled"`
+	// Channels this rule looks at: qsl (paper), lotw, eqsl, qrz.
+	//
+	// Empty means ALL of them — what an operator expects from a rule they have
+	// not narrowed, and what keeps a config written before this field meaningful.
+	Channels []string `json:"channels"`
+}
+
+// The QSL channels a rule can be scoped to.
+var rowColorChannels = []string{"qsl", "lotw", "eqsl", "qrz"}
+
+// RowColorSettings is the whole appearance block.
+type RowColorSettings struct {
+	Enabled bool `json:"enabled"`
+	// Style is how the colour is shown: "bar" paints a stripe down the left edge,
+	// "tint" washes the row, "both" does each.
+	//
+	// A bar is the default because a filled row is a poor signal in a log where
+	// nearly every contact has SOME QSL state: colour that is always present
+	// stops being information and becomes a striped background, with the data
+	// behind it. The stripe says the same thing and costs nothing to read.
+	Style string `json:"style"`
+	// Intensity is the tint strength in percent. Only used by "tint"/"both".
+	Intensity int `json:"intensity"`
+	// BandMapLotw marks stations that upload to LoTW on the band map, with the
+	// same "L" badge the cluster list uses — one visual vocabulary across the two
+	// views rather than a second invention.
+	BandMapLotw bool `json:"bandmap_lotw"`
+	// Configured distinguishes "saved with this off" from "saved before the
+	// option existed", so a new marker can default ON without silently turning
+	// itself back on for an operator who switched it off.
+	// RecentZebra decides whether the Recent QSOs grid alternates its row
+	// background. "" (or "on") keeps the banding, which is what the grid has
+	// always done; "off" makes every row the same colour.
+	//
+	// A string with an empty default rather than a bool: a bool would have to
+	// mean "true when absent", and every reader would have to remember that.
+	RecentZebra string `json:"recent_zebra,omitempty"`
+	// RecentZebraColor is the alternate row's colour. Empty follows the theme,
+	// which is the only answer that stays right across all four of them.
+	RecentZebraColor string         `json:"recent_zebra_color,omitempty"`
+	Configured       bool           `json:"configured"`
+	Rules            []RowColorRule `json:"rules"`
+}
+
+// The rule ids, in priority order. The frontend matches on these and holds the
+// labels, so a translated name never has to travel through the settings.
+// The four categories, in the order they are tested — first match wins.
+//
+// "To send" comes FIRST on purpose. A contact can be confirmed on LoTW and
+// still owe a paper card, and the colour an operator scans for is the one that
+// means "there is something left to do here". Put after "confirmed", that row
+// would go green and the card would never be printed.
+//
+// "Worked" is the catch-all: a contact with nothing sent, nothing asked for and
+// nothing back. Off by default — with it on, every remaining row is painted.
+var rowColorOrder = []string{
+	"to_send",   // requested or queued on a watched channel, not gone out
+	"confirmed", // a watched channel has a confirmation back
+	"sent",      // gone out on a watched channel, nothing back yet
+	"worked",    // none of the above
+}
+
+// Defaults: green for done, amber for waiting, blue for owed. Deliberately
+// muted — they are composited at low opacity over a dark grid, and a saturated
+// value there reads as an error state rather than a status.
+var rowColorDefaults = map[string]string{
+	"to_send":   "#a855f7",
+	"confirmed": "#16a34a",
+	"sent":      "#f59e0b",
+	"worked":    "#64748b",
+}
+
+// hexColor guards what reaches the stylesheet. The value is interpolated into a
+// CSS color-mix() by the grid, so anything that is not plainly a hex colour is
+// refused rather than passed through.
+var hexColor = regexp.MustCompile(`^#[0-9a-fA-F]{6}$`)
+
+func normRowColors(s RowColorSettings) RowColorSettings {
+	byID := map[string]RowColorRule{}
+	for _, r := range s.Rules {
+		byID[r.ID] = r
+	}
+	out := RowColorSettings{
+		Enabled: s.Enabled, Style: s.Style, Intensity: s.Intensity,
+		BandMapLotw: s.BandMapLotw, Configured: true,
+		RecentZebra: strings.ToLower(strings.TrimSpace(s.RecentZebra)),
+	}
+	if out.RecentZebra != "off" {
+		out.RecentZebra = "" // anything unrecognised means the default banding
+	}
+	if c := strings.TrimSpace(s.RecentZebraColor); hexColor.MatchString(c) {
+		out.RecentZebraColor = c
+	}
+	if !s.Configured {
+		out.BandMapLotw = true // new option, on unless the operator says otherwise
+	}
+	switch out.Style {
+	case "bar", "tint", "both":
+	default:
+		out.Style = "bar"
+	}
+	// Clamped rather than rejected: the value only shapes a colour-mix, and a
+	// number outside the range is a slider that got away, not a fault worth
+	// resetting the operator's whole choice for.
+	if out.Intensity < 5 {
+		out.Intensity = 12
+	} else if out.Intensity > 45 {
+		out.Intensity = 45
+	}
+	ok := map[string]bool{}
+	for _, c := range rowColorChannels {
+		ok[c] = true
+	}
+	for _, id := range rowColorOrder {
+		r := byID[id]
+		r.ID = id
+		if !hexColor.MatchString(strings.TrimSpace(r.Color)) {
+			r.Color = rowColorDefaults[id]
+		}
+		// Keep only channels we know, in the canonical order, de-duplicated.
+		want := map[string]bool{}
+		for _, c := range r.Channels {
+			want[strings.ToLower(strings.TrimSpace(c))] = true
+		}
+		chans := []string{}
+		for _, c := range rowColorChannels {
+			if want[c] {
+				chans = append(chans, c)
+			}
+		}
+		r.Channels = chans
+		out.Rules = append(out.Rules, r)
+	}
+	return out
+}
+
+// MatrixColors recolours the band/mode matrix — the PH/CW/DIG grid in the Stats
+// panel, whose five fills and current-entry ring are the fastest read in the
+// whole app and the one an operator is most likely to want in their own colours.
+//
+// Every colour is OPTIONAL and an empty one keeps whatever the active theme
+// paints. That is why this stores OVERRIDES rather than a palette: each of the
+// twelve themes ships a matrix ramp tuned to its own background, and an operator
+// who only wants a different green must not thereby freeze the other four to the
+// theme they happened to be using the day they picked it.
+type MatrixColors struct {
+	// Enabled off leaves the theme's own ramp untouched, so switching it off is a
+	// genuine revert and not "some other set of colours".
+	Enabled         bool   `json:"enabled"`
+	CallConfirmed   string `json:"call_confirmed"`
+	CallWorked      string `json:"call_worked"`
+	EntityConfirmed string `json:"entity_confirmed"`
+	EntityWorked    string `json:"entity_worked"`
+	NotWorked       string `json:"not_worked"`
+	CurrentEntry    string `json:"current_entry"`
+}
+
+// normMatrixColors keeps only plain hex values. Anything else becomes "" — i.e.
+// "use the theme's" — because these are written straight into a CSS custom
+// property, and the same rule as hexColor's own comment applies: what cannot be
+// trusted into a stylesheet is refused rather than passed through.
+func normMatrixColors(c MatrixColors) MatrixColors {
+	clean := func(s string) string {
+		s = strings.TrimSpace(s)
+		if hexColor.MatchString(s) {
+			return strings.ToLower(s)
+		}
+		return ""
+	}
+	return MatrixColors{
+		Enabled:         c.Enabled,
+		CallConfirmed:   clean(c.CallConfirmed),
+		CallWorked:      clean(c.CallWorked),
+		EntityConfirmed: clean(c.EntityConfirmed),
+		EntityWorked:    clean(c.EntityWorked),
+		NotWorked:       clean(c.NotWorked),
+		CurrentEntry:    clean(c.CurrentEntry),
+	}
+}
+
+// GetMatrixColors returns the operator's matrix palette overrides. All-empty
+// (the default) means "whatever the theme says".
+func (a *App) GetMatrixColors() MatrixColors {
+	var c MatrixColors
+	if raw := a.settingOr(keyMatrixColors, ""); raw != "" {
+		_ = json.Unmarshal([]byte(raw), &c)
+	}
+	return normMatrixColors(c)
+}
+
+// SaveMatrixColors persists them.
+func (a *App) SaveMatrixColors(c MatrixColors) error {
+	b, err := json.Marshal(normMatrixColors(c))
+	if err != nil {
+		return err
+	}
+	a.setSetting(keyMatrixColors, string(b))
+	return nil
+}
+
+// GetRowColors returns the row-colouring configuration, defaults included so the
+// panel never has to invent one.
+func (a *App) GetRowColors() RowColorSettings {
+	var s RowColorSettings
+	if raw := a.settingOr(keyRowColors, ""); raw != "" {
+		_ = json.Unmarshal([]byte(raw), &s)
+	}
+	return normRowColors(s)
+}
+
+// SaveRowColors persists it.
+func (a *App) SaveRowColors(s RowColorSettings) error {
+	b, err := json.Marshal(normRowColors(s))
+	if err != nil {
+		return err
+	}
+	a.setSetting(keyRowColors, string(b))
+	return nil
+}

appearance_test.go

@@ -0,0 +1,114 @@
+package main
+
+import "testing"
+
+// The colour is interpolated into a CSS color-mix() by the grid, so anything
+// that is not plainly a hex colour has to be refused rather than passed on.
+func TestRowColorsRefuseAnythingButHex(t *testing.T) {
+	in := RowColorSettings{Enabled: true, Rules: []RowColorRule{
+		{ID: "confirmed", Color: "#123abc", Enabled: true},
+		{ID: "sent", Color: "red; background:url(x)", Enabled: true},
+		{ID: "to_send", Color: "", Enabled: true},
+	}}
+	got := normRowColors(in)
+
+	byID := map[string]RowColorRule{}
+	for _, r := range got.Rules {
+		byID[r.ID] = r
+	}
+	if byID["confirmed"].Color != "#123abc" {
+		t.Errorf("a valid colour was rewritten: %q", byID["confirmed"].Color)
+	}
+	if byID["sent"].Color != rowColorDefaults["sent"] {
+		t.Errorf("an injection attempt survived: %q", byID["sent"].Color)
+	}
+	if byID["to_send"].Color != rowColorDefaults["to_send"] {
+		t.Errorf("an empty colour was kept: %q", byID["to_send"].Color)
+	}
+}
+
+// Priority lives in the data, not in a chain of ifs: a contact confirmed on
+// LoTW AND by card is confirmed, not "sent, awaiting reply". The panel shows
+// the rules in the order they apply, so that order must survive a round trip.
+func TestRowColorsKeepPriorityOrder(t *testing.T) {
+	// Saved in a jumbled order, as a hand-edited settings row could be.
+	got := normRowColors(RowColorSettings{Rules: []RowColorRule{
+		{ID: "to_send", Color: "#111111"},
+		{ID: "confirmed", Color: "#222222"},
+	}})
+	if len(got.Rules) != len(rowColorOrder) {
+		t.Fatalf("got %d rules, want every one present", len(got.Rules))
+	}
+	for i, id := range rowColorOrder {
+		if got.Rules[i].ID != id {
+			t.Errorf("rule %d is %q, want %q", i, got.Rules[i].ID, id)
+		}
+	}
+	// The saved colours survived the reordering: each stayed with its own rule.
+	byID := map[string]string{}
+	for _, r := range got.Rules {
+		byID[r.ID] = r.Color
+	}
+	if byID["to_send"] != "#111111" || byID["confirmed"] != "#222222" {
+		t.Errorf("colours moved between rules: %v", byID)
+	}
+}
+
+// Style and strength are normalised, not rejected: they only shape a colour, and
+// a value that got away is a slider, not a fault worth resetting the operator's
+// whole choice for.
+func TestRowColorsNormaliseStyleAndIntensity(t *testing.T) {
+	for _, tc := range []struct {
+		inStyle   string
+		inPct     int
+		wantStyle string
+		wantPct   int
+	}{
+		{"bar", 12, "bar", 12},
+		{"tint", 30, "tint", 30},
+		{"both", 45, "both", 45},
+		{"", 0, "bar", 12},           // never configured
+		{"wallpaper", 12, "bar", 12}, // not a style we draw
+		{"tint", 900, "tint", 45},    // clamped, not reset
+		{"tint", -5, "tint", 12},
+	} {
+		got := normRowColors(RowColorSettings{Style: tc.inStyle, Intensity: tc.inPct})
+		if got.Style != tc.wantStyle || got.Intensity != tc.wantPct {
+			t.Errorf("(%q,%d) -> (%q,%d), want (%q,%d)",
+				tc.inStyle, tc.inPct, got.Style, got.Intensity, tc.wantStyle, tc.wantPct)
+		}
+	}
+}
+
+// Channels are normalised to the canonical order, and anything unknown is
+// dropped. Empty stays empty, because empty means "every channel" — a rule the
+// operator has not narrowed must not silently become a rule about nothing.
+func TestRowColorChannelsNormalise(t *testing.T) {
+	got := normRowColors(RowColorSettings{Rules: []RowColorRule{
+		{ID: "confirmed", Color: "#111111", Channels: []string{"LOTW", "pigeon", "qsl", "lotw"}},
+		{ID: "sent", Color: "#222222"},
+	}})
+	byID := map[string][]string{}
+	for _, r := range got.Rules {
+		byID[r.ID] = r.Channels
+	}
+	if len(byID["confirmed"]) != 2 || byID["confirmed"][0] != "qsl" || byID["confirmed"][1] != "lotw" {
+		t.Errorf("confirmed channels = %v, want [qsl lotw] — canonical order, deduped, unknown dropped", byID["confirmed"])
+	}
+	if len(byID["sent"]) != 0 {
+		t.Errorf("sent channels = %v, want empty (meaning every channel)", byID["sent"])
+	}
+}
+
+// The order IS the priority, and "to send" leads. A contact confirmed on LoTW
+// that still owes a paper card must read as owing the card — put after
+// "confirmed" it would go green and never be printed.
+func TestToSendOutranksConfirmed(t *testing.T) {
+	got := normRowColors(RowColorSettings{})
+	if got.Rules[0].ID != "to_send" {
+		t.Errorf("first rule is %q, want to_send", got.Rules[0].ID)
+	}
+	if got.Rules[len(got.Rules)-1].ID != "worked" {
+		t.Errorf("last rule is %q, want worked as the catch-all", got.Rules[len(got.Rules)-1].ID)
+	}
+}

autostart.go

@@ -6,7 +6,9 @@ import (
 	"os"
 	"os/exec"
 	"path/filepath"
+	"strconv"
 	"strings"
+	"sync"
 	"syscall"
 
 	"hamlog/internal/applog"
@@ -26,6 +28,12 @@ type AutostartProgram struct {
 	Path    string `json:"path"`
 	Args    string `json:"args"`
 	Enabled bool   `json:"enabled"`
+	// CloseOnExit asks for this program to be closed when OpsLog closes.
+	//
+	// Per program and not one switch for the list, because the answer differs
+	// inside one station: an operator wants WSJT-X gone with the logger and the
+	// rotator controller left running.
+	CloseOnExit bool `json:"close_on_exit,omitempty"`
 }
 
 // AutostartLaunchResult reports what happened for one program when launching.
@@ -106,6 +114,52 @@ func (a *App) LaunchAutostartProgram(id string) (AutostartLaunchResult, error) {
 	return AutostartLaunchResult{}, fmt.Errorf("program %q not found", id)
 }
 
+// launched remembers the process id of every program OPSLOG started, keyed by
+// program id.
+//
+// Only what we started is ever closed. A copy of WSJT-X the operator opened
+// themselves — before OpsLog, for something else entirely — is theirs, and
+// closing it because a logger happened to quit would be taking a decision that
+// was never asked for. That is also why "already running" stores nothing.
+var launched = struct {
+	sync.Mutex
+	pid map[string]int
+}{pid: map[string]int{}}
+
+// CloseAutostartPrograms closes the programs marked "close with OpsLog" — the
+// ones OpsLog itself launched this session.
+//
+// A polite close, never a kill: taskkill without /F posts WM_CLOSE, so WSJT-X
+// writes its settings and its log the way it would if the operator had clicked
+// the cross. Forcing it would lose exactly the state an operator cares about,
+// and a program that ignores a close request is entitled to.
+func (a *App) CloseAutostartPrograms() {
+	progs, _ := a.GetAutostartPrograms()
+	for _, p := range progs {
+		if !p.CloseOnExit {
+			continue
+		}
+		launched.Lock()
+		pid, ok := launched.pid[p.ID]
+		delete(launched.pid, p.ID)
+		launched.Unlock()
+		if !ok || pid <= 0 {
+			continue // not started by us this session — not ours to close
+		}
+		name := strings.TrimSpace(p.Name)
+		if name == "" {
+			name = filepath.Base(p.Path)
+		}
+		cmd := exec.Command("taskkill", "/PID", strconv.Itoa(pid))
+		cmd.SysProcAttr = &syscall.SysProcAttr{HideWindow: true, CreationFlags: 0x08000000}
+		if out, err := cmd.CombinedOutput(); err != nil {
+			applog.Printf("autostart: could not close %s (pid %d): %v — %s", name, pid, err, strings.TrimSpace(string(out)))
+			continue
+		}
+		applog.Printf("autostart: asked %s (pid %d) to close", name, pid)
+	}
+}
+
 // launchProgram starts one program unless its executable is already running.
 func launchProgram(p AutostartProgram, running map[string]bool) AutostartLaunchResult {
 	res := AutostartLaunchResult{ID: p.ID, Name: p.Name}
@@ -131,6 +185,13 @@ func launchProgram(p AutostartProgram, running map[string]bool) AutostartLaunchR
 		res.Status, res.Message = "error", err.Error()
 		return res
 	}
+	// Remembered so it can be closed again on exit, if asked. Recorded BEFORE
+	// the wait goroutine, which releases the handle.
+	if cmd.Process != nil {
+		launched.Lock()
+		launched.pid[p.ID] = cmd.Process.Pid
+		launched.Unlock()
+	}
 	// Don't wait on the child — it runs independently of OpsLog. Release the
 	// handle so we don't accumulate zombies.
 	go func() { _ = cmd.Wait() }()

awardnew.go

@@ -0,0 +1,235 @@
+package main
+
+// "Have I worked this reference before?" — the NEW badge on a QSO's award
+// references.
+//
+// # Where the answer comes from, and where it must NOT come from
+//
+// The obvious source is the materialised award_refs column: it is already on
+// every row and one query reads it. It is also the wrong answer twice over.
+// That column holds DISPLAY LABELS, not references — depending on the award's
+// RefDisplay it can read "Krasnogvardeysky" or "ST-25 — Krasnogvardeysky", and
+// DXCC stores a country name — and it is a derived cache that lags: a QSO whose
+// references were back-filled (see BackfillRDA) counts on the Awards grid long
+// before anything recomputes its column. The first build of this badge used it
+// and marked a district worked on five bands as NEW.
+//
+// So the answer comes from the same place the Awards grid's answer comes from:
+// award.MatchQSO over the logbook. What is engineered here is the COST of that,
+// because the question is asked while the operator is logging:
+//
+//   - the set is per award CODE, and built only for codes actually asked about;
+//   - it reuses the award snapshot when one is already in memory, which it
+//     usually is (the Awards tab, the cluster status index);
+//   - otherwise it STREAMS the logbook rather than materialising a second copy
+//     of it — the references of one award are a few thousand short strings;
+//   - and it is built in the BACKGROUND. A caller that asks before the set is
+//     ready is told so and gets no badge, never a wait and never a wrong badge.
+//
+// A freshly logged QSO's references are folded into the sets, so a normal
+// evening of logging never rebuilds anything.
+
+import (
+	"strings"
+
+	"hamlog/internal/award"
+	"hamlog/internal/qso"
+)
+
+// workedRefIndex is the per-code set of references already in the log, plus the
+// logbook revision it describes.
+type workedRefIndex struct {
+	rev      string
+	byCode   map[string]map[string]struct{}
+	building map[string]bool
+}
+
+// AwardRefNewResult answers one badge request.
+type AwardRefNewResult struct {
+	// New maps "CODE@REF" to "never worked". An entry whose award set is still
+	// building is ABSENT rather than false: "not worked" and "not known yet"
+	// must not look the same to the badge.
+	New map[string]bool `json:"new"`
+	// Pending is true when at least one award set is still being built, and the
+	// caller should ask again shortly.
+	Pending bool `json:"pending"`
+}
+
+// AwardRefsNew reports which of the given "CODE@REF" entries have never been
+// worked. Returns immediately, always.
+func (a *App) AwardRefsNew(entries []string) AwardRefNewResult {
+	res := AwardRefNewResult{New: map[string]bool{}}
+	if a.qso == nil || len(entries) == 0 {
+		return res
+	}
+	rev, err := a.qso.Revision(a.ctx)
+	if err != nil {
+		return res // logbook unreachable: no badge is the honest answer
+	}
+
+	// Group the request by award code, so one code is looked up once however
+	// many of its references are on the QSO.
+	want := map[string][]string{}
+	for _, e := range entries {
+		code, _, ok := splitRefEntry(e)
+		if !ok {
+			continue
+		}
+		want[code] = append(want[code], e)
+	}
+
+	a.workedRefMu.Lock()
+	if a.workedRef.rev != rev || a.workedRef.byCode == nil {
+		// The logbook moved on: every set describes a log that no longer exists.
+		a.workedRef = workedRefIndex{rev: rev, byCode: map[string]map[string]struct{}{}, building: map[string]bool{}}
+	}
+	var build []string
+	for code := range want {
+		set, ready := a.workedRef.byCode[code]
+		if !ready {
+			if !a.workedRef.building[code] {
+				a.workedRef.building[code] = true
+				build = append(build, code)
+			}
+			res.Pending = true
+			continue
+		}
+		for _, e := range want[code] {
+			_, ref, _ := splitRefEntry(e)
+			_, worked := set[ref]
+			res.New[e] = !worked
+		}
+	}
+	a.workedRefMu.Unlock()
+
+	for _, code := range build {
+		go a.buildWorkedRefs(code, rev)
+	}
+	return res
+}
+
+// splitRefEntry splits "RDA@ST-25" into its uppercased code and reference.
+func splitRefEntry(e string) (code, ref string, ok bool) {
+	at := strings.Index(e, "@")
+	if at <= 0 {
+		return "", "", false
+	}
+	code = strings.ToUpper(strings.TrimSpace(e[:at]))
+	ref = strings.ToUpper(strings.TrimSpace(e[at+1:]))
+	return code, ref, code != "" && ref != ""
+}
+
+// buildWorkedRefs collects every reference of one award already in the log.
+func (a *App) buildWorkedRefs(code string, rev string) {
+	set := map[string]struct{}{}
+	defer func() {
+		a.workedRefMu.Lock()
+		// Publish only against the revision we were asked for: a QSO logged while
+		// this ran has already reset the index, and a set built from the older log
+		// would claim to describe the newer one.
+		if a.workedRef.rev == rev && a.workedRef.byCode != nil {
+			a.workedRef.byCode[code] = set
+		}
+		delete(a.workedRef.building, code)
+		a.workedRefMu.Unlock()
+	}()
+
+	var def *award.Def
+	for _, d := range a.awardDefs() {
+		if strings.EqualFold(d.Code, code) {
+			dd := d
+			def = &dd
+			break
+		}
+	}
+	if def == nil {
+		return // unknown award: an empty set, so nothing is ever badged NEW
+	}
+	metas := a.awardRefMetas([]award.Def{*def})[strings.ToUpper(def.Code)]
+	collect := func(q *qso.QSO) {
+		for _, r := range award.MatchQSO(*def, metas, q) {
+			set[strings.ToUpper(strings.TrimSpace(r))] = struct{}{}
+		}
+	}
+
+	// The snapshot is already enriched and already in memory whenever the Awards
+	// tab has been open — by far the common case, and free.
+	if snap := a.awardSnapshotIfLoaded(); snap != nil {
+		for i := range snap {
+			collect(&snap[i])
+		}
+		return
+	}
+	// Otherwise stream. One pass, nothing retained but the reference strings.
+	_ = a.qso.IterateForAwards(a.ctx, func(q qso.QSO) error {
+		a.enrichQSOForAwards(&q)
+		collect(&q)
+		return nil
+	})
+}
+
+// awardSnapshotIfLoaded returns the award snapshot ONLY if one is already built
+// and current. Never builds one: the caller is a background convenience, and
+// reading the whole logbook for it is the cost this file exists to avoid.
+func (a *App) awardSnapshotIfLoaded() []qso.QSO {
+	rev, err := a.qso.Revision(a.ctx)
+	if err != nil {
+		return nil
+	}
+	a.awardSnapMu.Lock()
+	defer a.awardSnapMu.Unlock()
+	if a.awardSnap != nil && a.awardSnapRev == rev {
+		return a.awardSnap
+	}
+	return nil
+}
+
+// noteWorkedQSO folds a just-logged contact's references into the built sets, so
+// logging does not throw away work already done.
+func (a *App) noteWorkedQSO(q qso.QSO) {
+	a.workedRefMu.Lock()
+	codes := make(map[string]bool, len(a.workedRef.byCode))
+	for c := range a.workedRef.byCode {
+		codes[c] = true
+	}
+	a.workedRefMu.Unlock()
+	if len(codes) == 0 {
+		return
+	}
+	rev, err := a.qso.Revision(a.ctx)
+	if err != nil {
+		return
+	}
+	a.enrichQSOForAwards(&q)
+	found := map[string][]string{}
+	for _, d := range a.awardDefs() {
+		code := strings.ToUpper(d.Code)
+		if !codes[code] {
+			continue
+		}
+		metas := a.awardRefMetas([]award.Def{d})[code]
+		for _, r := range award.MatchQSO(d, metas, &q) {
+			found[code] = append(found[code], strings.ToUpper(strings.TrimSpace(r)))
+		}
+	}
+	a.workedRefMu.Lock()
+	defer a.workedRefMu.Unlock()
+	// Carry the sets forward to the new revision rather than dropping them: they
+	// were correct one contact ago, and that contact is what is being added.
+	a.workedRef.rev = rev
+	for code, refs := range found {
+		if set := a.workedRef.byCode[code]; set != nil {
+			for _, r := range refs {
+				set[r] = struct{}{}
+			}
+		}
+	}
+}
+
+// invalidateWorkedRefs drops every set. For the changes a revision cannot see —
+// award definitions edited, reference lists updated, QSLs confirmed.
+func (a *App) invalidateWorkedRefs() {
+	a.workedRefMu.Lock()
+	a.workedRef = workedRefIndex{}
+	a.workedRefMu.Unlock()
+}

awardnew_test.go

@@ -0,0 +1,22 @@
+package main
+
+import "testing"
+
+func TestSplitRefEntry(t *testing.T) {
+	code, ref, ok := splitRefEntry("rda@st-25")
+	if !ok || code != "RDA" || ref != "ST-25" {
+		t.Fatalf("got %q %q %v", code, ref, ok)
+	}
+	// The picker writes what the operator typed, spacing included.
+	if _, ref, _ = splitRefEntry("POTA@ fr-1234 "); ref != "FR-1234" {
+		t.Fatalf("not trimmed: %q", ref)
+	}
+	// A reference can contain the separator characters of a label; only the
+	// FIRST @ splits, so "IOTA@EU-064" survives and a stray one does not create
+	// an award out of nothing.
+	for _, bad := range []string{"", "RDA", "@ST-25", "RDA@", "RDA@  "} {
+		if _, _, ok := splitRefEntry(bad); ok {
+			t.Fatalf("%q accepted", bad)
+		}
+	}
+}

awardrelabel_test.go

@@ -0,0 +1,65 @@
+package main
+
+import (
+	"testing"
+
+	"hamlog/internal/award"
+)
+
+// relabelOnly decides whether a save can take the cheap path. A wrong "yes"
+// leaves stale references in the log, so every case that is not purely a
+// display change must fall through to the full recompute.
+func TestRelabelOnly(t *testing.T) {
+	base := []award.Def{
+		{Code: "DDFM", Field: "note", RefDisplay: "ref", Valid: true},
+		{Code: "IOTA", Field: "iota", RefDisplay: "", Valid: true},
+	}
+	cp := func() []award.Def { out := make([]award.Def, len(base)); copy(out, base); return out }
+
+	// The case this exists for: one award's column switches to the description.
+	next := cp()
+	next[0].RefDisplay = "name"
+	codes, ok := relabelOnly(base, next)
+	if !ok || len(codes) != 1 || codes[0] != "DDFM" {
+		t.Errorf("display-only change = (%v, %v), want ([DDFM], true)", codes, ok)
+	}
+
+	// Two at once is still a relabel.
+	next = cp()
+	next[0].RefDisplay = "both"
+	next[1].RefDisplay = "name"
+	if codes, ok := relabelOnly(base, next); !ok || len(codes) != 2 {
+		t.Errorf("two display changes = (%v, %v), want two codes", codes, ok)
+	}
+
+	// Nothing changed: no relabel to do, and no full recompute claimed either.
+	if codes, ok := relabelOnly(base, cp()); ok || codes != nil {
+		t.Errorf("identical definitions must not report a relabel, got (%v, %v)", codes, ok)
+	}
+
+	// Anything that can change WHICH QSOs match must fail the test.
+	for name, mutate := range map[string]func([]award.Def){
+		"field":     func(d []award.Def) { d[0].Field = "comment" },
+		"pattern":   func(d []award.Def) { d[0].Pattern = `\d{2}` },
+		"exact":     func(d []award.Def) { d[0].ExactMatch = true },
+		"validity":  func(d []award.Def) { d[0].ValidFrom = "2020-01-01" },
+		"dxcc":      func(d []award.Def) { d[0].DXCCFilter = []int{227} },
+		"disabled":  func(d []award.Def) { d[0].Valid = false },
+		"or rule":   func(d []award.Def) { d[0].OrRules = []award.OrRule{{Field: "qth"}} },
+		"with disp": func(d []award.Def) { d[0].RefDisplay = "name"; d[0].Field = "comment" },
+	} {
+		n := cp()
+		mutate(n)
+		if _, ok := relabelOnly(base, n); ok {
+			t.Errorf("%s: took the relabel path — stale references would stay in the log", name)
+		}
+	}
+
+	// An award added or removed changes the set, never a relabel.
+	if _, ok := relabelOnly(base, append(cp(), award.Def{Code: "WWFF"})); ok {
+		t.Errorf("an added award must force a full recompute")
+	}
+	if _, ok := relabelOnly(base, cp()[:1]); ok {
+		t.Errorf("a removed award must force a full recompute")
+	}
+}

awardsnap_test.go

@@ -0,0 +1,84 @@
+package main
+
+import (
+	"sync"
+	"testing"
+	"time"
+)
+
+// The award snapshot must be built ONCE however many callers ask at once.
+//
+// The cache lock is released before the logbook is read, so every caller that
+// arrives during a build used to miss the cache and start its own. Opening the
+// Awards panel does exactly that: a field log showed three pulls of the same
+// 123 615 QSOs inside ten seconds, and three copies alive together took the Go
+// heap from 725 MB to 2.5 GB.
+//
+// This models the same shape — a cheap cache check, a slow build, a shared
+// result — against the pattern awardSnapshot now uses, so the invariant is
+// pinned without needing a logbook.
+func TestSnapshotBuildsOncePerRevision(t *testing.T) {
+	var (
+		cacheMu sync.Mutex
+		buildMu sync.Mutex
+		cached  []int
+		rev     = "r1"
+		gotRev  string
+		builds  int
+	)
+
+	get := func() []int {
+		cacheMu.Lock()
+		if cached != nil && gotRev == rev {
+			defer cacheMu.Unlock()
+			return cached
+		}
+		cacheMu.Unlock()
+
+		buildMu.Lock()
+		defer buildMu.Unlock()
+		// Re-check: whoever held the build lock has just finished.
+		cacheMu.Lock()
+		if cached != nil && gotRev == rev {
+			defer cacheMu.Unlock()
+			return cached
+		}
+		cacheMu.Unlock()
+
+		time.Sleep(50 * time.Millisecond) // the logbook read
+		out := []int{1, 2, 3}
+
+		cacheMu.Lock()
+		builds++
+		cached, gotRev = out, rev
+		cacheMu.Unlock()
+		return out
+	}
+
+	var wg sync.WaitGroup
+	results := make([][]int, 8)
+	for i := range results {
+		wg.Add(1)
+		go func(i int) { defer wg.Done(); results[i] = get() }(i)
+	}
+	wg.Wait()
+
+	if builds != 1 {
+		t.Errorf("%d builds for one revision — each concurrent caller pulled the whole logbook again", builds)
+	}
+	for i, r := range results {
+		if len(r) != 3 {
+			t.Errorf("caller %d got %v", i, r)
+		}
+	}
+
+	// A new revision must rebuild: the guard is against duplicate work, not
+	// against a logbook that changed.
+	cacheMu.Lock()
+	rev = "r2"
+	cacheMu.Unlock()
+	get()
+	if builds != 2 {
+		t.Errorf("builds = %d after the revision moved, want 2 — a changed logbook must be re-read", builds)
+	}
+}

bandchange_test.go

@@ -0,0 +1,36 @@
+package main
+
+import "testing"
+
+// A band change now has two sources: the rig, and the entry strip on a station
+// whose rig OpsLog does not control. They share one memory of the last band, so
+// a station that has both commands its antenna switch once per QSY rather than
+// twice — the entry selector pushes a QSY, the rig reports the same band back,
+// and only the first of the two is a change.
+func TestBandChangeIsNotedOncePerBand(t *testing.T) {
+	lastTriggerBandMu.Lock()
+	lastTriggerBand = ""
+	lastTriggerBandMu.Unlock()
+
+	if b, changed := noteBandChange("20m"); !changed || b != "20m" {
+		t.Fatalf("first 20m = (%q,%v), want (\"20m\",true)", b, changed)
+	}
+	// The same band from the other source — the rig echoing the QSY back.
+	if _, changed := noteBandChange("20M"); changed {
+		t.Error("the rig echoing the band back counted as a second change — the switch would be commanded twice")
+	}
+	if _, changed := noteBandChange(" 20m "); changed {
+		t.Error("whitespace made the same band look new")
+	}
+	if b, changed := noteBandChange("40m"); !changed || b != "40m" {
+		t.Errorf("40m = (%q,%v), want (\"40m\",true)", b, changed)
+	}
+	// An unknown band must not be recorded, or the next real one would look
+	// unchanged against it.
+	if _, changed := noteBandChange(""); changed {
+		t.Error("an empty band was treated as a change")
+	}
+	if _, changed := noteBandChange("40m"); changed {
+		t.Error("the empty band overwrote the last one")
+	}
+}

bandopen_nearkm_test.go

@@ -0,0 +1,37 @@
+package main
+
+import (
+	"testing"
+
+	"hamlog/internal/pskr"
+)
+
+// The receiver radius is what makes an opening report evidence about the
+// OPERATOR's path rather than someone else's. Both ends of the range destroy
+// that: too small and no receiver is ever near enough, too large and the
+// reports are about a different part of the world. A stored value that would do
+// either has to fall back rather than be honoured.
+func TestBandOpenNearKmClamps(t *testing.T) {
+	for _, tc := range []struct {
+		name string
+		raw  string
+		want int
+	}{
+		{"unset falls back", "", pskr.DefaultNearKm},
+		{"not a number falls back", "soon", pskr.DefaultNearKm},
+		{"zero falls back", "0", pskr.DefaultNearKm},
+		{"negative falls back", "-100", pskr.DefaultNearKm},
+		{"absurdly tight falls back", "5", pskr.DefaultNearKm},
+		{"absurdly wide falls back", "5000", pskr.DefaultNearKm},
+		{"a real choice is kept", "100", 100},
+		{"the lower bound is kept", "25", 25},
+		{"the upper bound is kept", "1000", 1000},
+		{"surrounding space is ignored", "  150 ", 150},
+	} {
+		t.Run(tc.name, func(t *testing.T) {
+			if got := bandOpenNearKm(tc.raw); got != tc.want {
+				t.Errorf("bandOpenNearKm(%q) = %d, want %d", tc.raw, got, tc.want)
+			}
+		})
+	}
+}

bandopen_sources.go

@@ -0,0 +1,299 @@
+package main
+
+// The data sources band-opening detection depends on, and the settings that
+// switch them on.
+//
+// The detection shipped reading whatever the operator's cluster nodes happened
+// to carry. That was a design mistake of the worst kind: the feature depended
+// on RBN feeds and a PSK Reporter subscription that nobody could know were
+// needed, so it looked broken rather than unconfigured. Nexus showed a 6 m
+// opening with 869 stations while OpsLog, on the same PC, showed nothing.
+//
+// So enabling the watch ARRANGES ITS OWN SOURCES: it adds the two RBN nodes if
+// they are missing and brings the PSK Reporter feed up. Turning it off leaves
+// the nodes alone — they may have been wanted for their own sake, and silently
+// removing a cluster node an operator is using would be worse than leaving one
+// they no longer need.
+
+import (
+	"strconv"
+	"strings"
+
+	"hamlog/internal/applog"
+	"hamlog/internal/bandopen"
+	"hamlog/internal/cluster"
+	"hamlog/internal/geo"
+	"hamlog/internal/gridcache"
+	"hamlog/internal/pskr"
+)
+
+const (
+	keyBandOpenEnabled = "bandopen.enabled"
+	keyBandOpenBands   = "bandopen.bands"  // comma-separated; empty = the default set
+	keyBandOpenNearKm  = "bandopen.nearkm" // receiver radius; empty = pskr.DefaultNearKm
+)
+
+// rbnNodes are the two Reverse Beacon Network endpoints the watch wants: CW and
+// digital are separate ports and carry different skimmers.
+var rbnNodes = []cluster.ServerConfig{
+	{Name: "RBN CW", Host: "telnet.reversebeacon.net", Port: 7000, Enabled: true},
+	{Name: "RBN FTx", Host: "telnet.reversebeacon.net", Port: 7001, Enabled: true},
+}
+
+// BandOpenSettings is the panel's shape.
+type BandOpenSettings struct {
+	Enabled bool     `json:"enabled"`
+	Bands   []string `json:"bands"`
+	// Available is every band that can be watched, so the UI does not carry its
+	// own copy of a list that belongs to the detector.
+	Available []string `json:"available"`
+	// NearKm is how close a RECEIVER has to be for its report to count as
+	// evidence about the operator's own path. An opening on these bands reaches
+	// an AREA, and the right radius is a judgement about how big that area is —
+	// a 2 m tropo duct is not a 10 m Es footprint — so it is the operator's to
+	// make rather than a constant.
+	//
+	// Tightening it costs nothing in traffic: the broker subscription is one
+	// ring of squares whatever this says, and this only decides what survives
+	// once the messages are here. It costs SENSITIVITY — too small a radius in a
+	// thinly-populated region leaves no receivers at all, and a watch with
+	// nothing to look at reports nothing while appearing to work.
+	NearKm int `json:"near_km"`
+}
+
+func (a *App) GetBandOpenSettings() BandOpenSettings {
+	s := BandOpenSettings{
+		Enabled:   a.settingOr(keyBandOpenEnabled, "") == "1",
+		Bands:     splitCSV(a.settingOr(keyBandOpenBands, "")),
+		Available: pskr.Bands,
+		NearKm:    bandOpenNearKm(a.settingOr(keyBandOpenNearKm, "")),
+	}
+	// Keep only bands that are still offered. A saved selection outlives the code
+	// that made it: 12 m was dropped from the watched set, but every operator who
+	// had already enabled the watch kept subscribing to it — paying for a firehose
+	// whose messages the detector then threw away.
+	s.Bands = keepKnownBands(s.Bands)
+	if len(s.Bands) == 0 {
+		s.Bands = append(s.Bands, pskr.Bands...)
+	}
+	return s
+}
+
+func keepKnownBands(want []string) []string {
+	ok := make(map[string]bool, len(pskr.Bands))
+	for _, b := range pskr.Bands {
+		ok[b] = true
+	}
+	out := make([]string, 0, len(want))
+	for _, b := range want {
+		if ok[strings.ToLower(strings.TrimSpace(b))] {
+			out = append(out, b)
+		}
+	}
+	return out
+}
+
+// bandOpenNearKm reads the stored receiver radius, falling back to the default
+// for anything unset or out of range. The bounds are the two ways to make the
+// watch useless: below 25 km almost nobody is ever near enough to hear anything,
+// and past 1000 km the reports stop being about the operator's own path — which
+// is the entire premise of measuring from a receiver rather than a transmitter.
+func bandOpenNearKm(raw string) int {
+	n, err := strconv.Atoi(strings.TrimSpace(raw))
+	if err != nil || n < 25 || n > 1000 {
+		return pskr.DefaultNearKm
+	}
+	return n
+}
+
+func (a *App) SaveBandOpenSettings(s BandOpenSettings) error {
+	a.setSetting(keyBandOpenEnabled, map[bool]string{true: "1", false: "0"}[s.Enabled])
+	a.setSetting(keyBandOpenBands, strings.Join(s.Bands, ","))
+	a.setSetting(keyBandOpenNearKm, strconv.Itoa(bandOpenNearKm(strconv.Itoa(s.NearKm))))
+	if s.Enabled {
+		a.ensureRBNNodes()
+	}
+	a.startBandOpenFeed()
+	return nil
+}
+
+// ensureRBNNodes adds the RBN endpoints when they are absent.
+//
+// Matched on host AND port rather than on name: an operator who renamed theirs
+// "Skimmers CW" has the node, and adding a second one pointed at the same
+// server would give them every spot twice — which the detector would read as
+// twice as many stations, i.e. an opening that is not there.
+func (a *App) ensureRBNNodes() {
+	have, err := a.ListClusterServers()
+	if err != nil {
+		applog.Printf("bandopen: cannot read the cluster nodes (%v) — not adding RBN", err)
+		return
+	}
+	for _, want := range rbnNodes {
+		found := false
+		for _, h := range have {
+			if strings.EqualFold(strings.TrimSpace(h.Host), want.Host) && h.Port == want.Port {
+				found = true
+				break
+			}
+		}
+		if found {
+			continue
+		}
+		if _, err := a.SaveClusterServer(want); err != nil {
+			applog.Printf("bandopen: could not add %s: %v", want.Name, err)
+			continue
+		}
+		applog.Printf("bandopen: added cluster node %s (%s:%d) — the watch needs it",
+			want.Name, want.Host, want.Port)
+	}
+}
+
+// startBandOpenFeed brings the PSK Reporter subscription up or down to match
+// the setting. Called at startup and whenever the setting is saved.
+func (a *App) startBandOpenFeed() {
+	if a.pskr != nil {
+		a.pskr.Stop()
+		a.pskr = nil
+	}
+	s := a.GetBandOpenSettings()
+	a.bandOpen.on.Store(s.Enabled)
+	a.setBandOpenBands(s.Bands)
+	if !s.Enabled {
+		// Put out whatever is currently lit. Leaving the badges up would keep
+		// announcing an opening from a watch that is now off, and they only fade
+		// on a timer fed by spots this path no longer looks at — so they would
+		// hang there until the app restarted.
+		a.clearBandOpenings()
+	}
+	chaseGrids := a.gridStore != nil
+	chaseNew := a.chaseNewEnabled()
+	// Three consumers, one feed. Any one of them is reason enough to bring it up,
+	// and turning one off must not cut the others loose.
+	if !s.Enabled && !chaseGrids && !chaseNew {
+		return
+	}
+	// Every spot is measured from the operator's position. Without one there is
+	// nothing to measure, and a detector fed unmeasurable spots reports nothing
+	// while looking like it is working.
+	if !a.opSet {
+		applog.Printf("pskr: no station grid set — the feed needs one to measure a path")
+		return
+	}
+
+	// Grid chasing and new-chasing want every band; the opening watch wants its
+	// four. "+" is the MQTT single-level wildcard, so one subscription per square
+	// covers the lot.
+	bands := s.Bands
+	if chaseGrids || chaseNew {
+		bands = []string{"+"}
+	}
+	// Filter at the BROKER on the receiver's square rather than receiving the
+	// world and discarding it here. Measured on the live feed: the four opening
+	// bands unfiltered are 83 messages a second, of which roughly one in a
+	// hundred survived the NearKm test below. One ring of squares — about the
+	// same 300 km — is 0.2 to 1.2 a second, and the same for every operator,
+	// where filtering by DXCC ranged from 1.2 (OH) to 72.5 (K).
+	rxGrids := geo.NeighbourGrids(a.opLat, a.opLon, 1)
+
+	var onGrid func(call, grid string)
+	if chaseGrids {
+		onGrid = func(call, grid string) { a.rememberDecodeGrid(call, grid, gridcache.SourceMQTT) }
+	}
+	var onSpot func(pskr.Spot)
+	switch {
+	case s.Enabled && chaseNew:
+		onSpot = func(sp pskr.Spot) { a.feedBandOpen(sp); a.feedChaseNew(sp) }
+	case s.Enabled:
+		onSpot = a.feedBandOpen
+	case chaseNew:
+		onSpot = a.feedChaseNew
+	}
+
+	a.pskr = pskr.New(pskr.Config{
+		Bands:   bands,
+		RxGrids: rxGrids,
+		NearKm:  s.NearKm,
+		OpLat:   a.opLat, OpLon: a.opLon,
+		Geo: func(grid string) (int, int, bool) {
+			lat, lon, ok := gridToLatLon(grid)
+			if !ok {
+				return 0, 0, false
+			}
+			// The same arithmetic the cluster path uses, so one spot cannot be
+			// 2000 km away down one road and 2100 km down the other.
+			d := int(haversineKm(a.opLat, a.opLon, lat, lon) + 0.5)
+			b := int(initialBearingDeg(a.opLat, a.opLon, lat, lon) + 0.5)
+			return d, b, true
+		},
+		OnSpot: onSpot,
+		OnGrid: onGrid,
+		Logf:   applog.Printf,
+	})
+	if err := a.pskr.Start(); err != nil {
+		applog.Printf("pskr: feed did not start: %v", err)
+		return
+	}
+	applog.Printf("pskr: feed up — bands %v, %d receiver squares (openings=%v, grids=%v, chase-new=%v)",
+		bands, len(rxGrids), s.Enabled, chaseGrids, chaseNew)
+}
+
+// feedBandOpen hands one PSK Reporter decode to the detector.
+//
+// Called from the MQTT goroutine at up to thousands a minute when 6 m is open,
+// so it does the least possible: the detector's own window and de-duplication
+// by callsign are what turn that flood into one announcement.
+func (a *App) feedBandOpen(s pskr.Spot) {
+	if !a.bandOpenWanted(s.Band) {
+		return
+	}
+	a.bandOpen.mu.Lock()
+	if a.bandOpen.det == nil {
+		a.bandOpen.det = bandopen.New(bandopen.DefaultConfig())
+	}
+	op := a.bandOpen.det.Add(bandopen.Spot{
+		Call: s.Call, Band: s.Band, DistKm: s.DistKm, Bearing: s.Bearing, At: s.At,
+	}, a.opLat)
+	if op != nil {
+		a.rememberOpening(*op)
+	}
+	if s.DistKm >= bandopen.DefaultConfig().MinKm {
+		a.markBandAlive(s.Band, s.At)
+	}
+	a.bandOpen.mu.Unlock()
+	if op != nil {
+		a.announceOpening(*op)
+	}
+}
+
+// GetPSKReporterStatus is what the settings panel polls.
+func (a *App) GetPSKReporterStatus() pskr.Status {
+	if a.pskr == nil {
+		return pskr.Status{Bands: pskr.Bands}
+	}
+	return a.pskr.Status()
+}
+
+// settingOr reads one key, falling back when the store is not up yet or the
+// value is blank. The settings store is a plain string key/value and every
+// caller does this by hand; two of them here earn the helper.
+func (a *App) settingOr(key, def string) string {
+	if a.settings == nil {
+		return def
+	}
+	v, _ := a.settings.Get(a.ctx, key)
+	if strings.TrimSpace(v) == "" {
+		return def
+	}
+	return v
+}
+
+func splitCSV(s string) []string {
+	var out []string
+	for _, p := range strings.Split(s, ",") {
+		if p = strings.TrimSpace(p); p != "" {
+			out = append(out, p)
+		}
+	}
+	return out
+}

bandopening.go

@@ -0,0 +1,230 @@
+package main
+
+// Band-opening announcements — the app-side glue for internal/bandopen.
+//
+// The detector needs nothing OpsLog does not already compute: the cluster event
+// worker enriches every spot with the great-circle distance and bearing from
+// the operator's grid before this is called. So watching for sporadic E costs
+// one function call per spot and no new data source.
+
+import (
+	"fmt"
+	"strings"
+	"sync"
+	"sync/atomic"
+	"time"
+
+	"hamlog/internal/applog"
+	"hamlog/internal/bandopen"
+	"hamlog/internal/cluster"
+
+	wruntime "github.com/wailsapp/wails/v2/pkg/runtime"
+)
+
+type bandOpenState struct {
+	// on mirrors the "Watch for band openings" setting.
+	//
+	// Cached rather than read per spot: this is the cluster hot path, where a
+	// settings query per spot is exactly what the rest of this file avoids.
+	// startBandOpenFeed owns it — it runs at startup and again on every save, so
+	// the switch takes effect without a restart.
+	on atomic.Bool
+	// bands is the operator's SELECTED set, held as map[string]bool.
+	//
+	// bandopen.Watched only says which bands the detector is capable of; it
+	// knows nothing about the chips in Settings. Nothing checked the selection
+	// on either feed path, so unticking 10 m and 2 m changed the subscription and
+	// left the cluster path announcing them anyway.
+	bands atomic.Value
+	mu    sync.Mutex
+	det  *bandopen.Detector
+	last []bandopen.Opening // most recent first, for the UI
+	// live holds the announced openings that are still going, keyed by band, and
+	// aliveUntil says when each stops counting as current.
+	//
+	// The detector announces an opening ONCE and then goes quiet for 45 minutes,
+	// which is right for a message but useless for a badge that has to stay lit
+	// while the band is open and go out when it closes. Nothing tells us an
+	// opening ended, so it is inferred: every qualifying spot on that band pushes
+	// the deadline out, and when they stop arriving the badge fades by itself.
+	live       map[string]bandopen.Opening
+	aliveUntil map[string]time.Time
+}
+
+// openingIdle is how long a band may go without a qualifying spot before its
+// badge goes out. Longer than the detector's own 12-minute window, so a quiet
+// couple of minutes mid-opening does not blink the badge off and on again.
+const openingIdle = 15 * time.Minute
+
+const maxRememberedOpenings = 20
+
+// detectBandOpening feeds one spot to the detector and announces a hit.
+func (a *App) detectBandOpening(s cluster.Spot) {
+	// The watch has to be switched on.
+	//
+	// It was not checked here at all: the setting only ever governed the extra
+	// DATA SOURCES (the RBN nodes and the PSK Reporter feed), while the detector
+	// itself ran on every ordinary cluster spot. So an operator who had never
+	// enabled the watch still got opening banners, from a feature they had
+	// deliberately left off.
+	if !a.bandOpen.on.Load() || !a.bandOpenWanted(s.Band) {
+		return
+	}
+	// No operator grid = no distance and no bearing on the spot, and the whole
+	// detection rests on those two. Say nothing rather than guess.
+	if !a.opSet || s.DistanceKm <= 0 || !bandopen.Watched(s.Band) {
+		return
+	}
+	a.bandOpen.mu.Lock()
+	if a.bandOpen.det == nil {
+		a.bandOpen.det = bandopen.New(bandopen.DefaultConfig())
+	}
+	op := a.bandOpen.det.Add(bandopen.Spot{
+		Call: s.DXCall, Band: s.Band, DistKm: s.DistanceKm,
+		Bearing: s.ShortPath, At: s.ReceivedAt,
+	}, a.opLat)
+	if op != nil {
+		a.rememberOpening(*op)
+	}
+	// Keeps a lit badge lit. Gated on the same floor the detector uses, or a
+	// band busy with short-range tropo would hold an Es badge on for ever.
+	if s.DistanceKm >= bandopen.DefaultConfig().MinKm {
+		a.markBandAlive(s.Band, s.ReceivedAt)
+	}
+	a.bandOpen.mu.Unlock()
+	if op != nil {
+		a.announceOpening(*op)
+	}
+}
+
+// markBandAlive pushes a band's badge deadline out. Called for every spot the
+// detector accepted, from either feed. Cheap on purpose: this runs on the MQTT
+// goroutine at thousands a minute when 6 m is open.
+//
+// Caller holds bandOpen.mu.
+func (a *App) markBandAlive(band string, at time.Time) {
+	if _, lit := a.bandOpen.live[strings.ToLower(band)]; !lit {
+		return // nothing announced for this band, nothing to keep alive
+	}
+	if a.bandOpen.aliveUntil == nil {
+		a.bandOpen.aliveUntil = map[string]time.Time{}
+	}
+	a.bandOpen.aliveUntil[strings.ToLower(band)] = at.Add(openingIdle)
+}
+
+// rememberOpening files a detection and lights its badge. Caller holds the mutex.
+func (a *App) rememberOpening(op bandopen.Opening) {
+	a.bandOpen.last = append([]bandopen.Opening{op}, a.bandOpen.last...)
+	if len(a.bandOpen.last) > maxRememberedOpenings {
+		a.bandOpen.last = a.bandOpen.last[:maxRememberedOpenings]
+	}
+	if a.bandOpen.live == nil {
+		a.bandOpen.live = map[string]bandopen.Opening{}
+		a.bandOpen.aliveUntil = map[string]time.Time{}
+	}
+	b := strings.ToLower(op.Band)
+	a.bandOpen.live[b] = op
+	a.bandOpen.aliveUntil[b] = op.At.Add(openingIdle)
+}
+
+// GetLiveOpenings returns the openings still under way, for the status-bar
+// badge. Expired ones are dropped as they are noticed — there is no janitor for
+// something that holds at most five entries.
+func (a *App) GetLiveOpenings() []bandopen.Opening {
+	now := time.Now()
+	a.bandOpen.mu.Lock()
+	defer a.bandOpen.mu.Unlock()
+	out := make([]bandopen.Opening, 0, len(a.bandOpen.live))
+	for b, op := range a.bandOpen.live {
+		if until, ok := a.bandOpen.aliveUntil[b]; !ok || now.After(until) {
+			delete(a.bandOpen.live, b)
+			delete(a.bandOpen.aliveUntil, b)
+			applog.Printf("bandopen: %s opening has gone quiet", strings.ToUpper(b))
+			continue
+		}
+		out = append(out, op)
+	}
+	return out
+}
+
+// bandOpenWanted reports whether the operator has this band ticked. Falls back
+// to the detector's own set until a selection has been stored, so a band is
+// never silently dropped before the settings have been read.
+func (a *App) bandOpenWanted(band string) bool {
+	if !bandopen.Watched(band) {
+		return false
+	}
+	sel, ok := a.bandOpen.bands.Load().(map[string]bool)
+	if !ok || len(sel) == 0 {
+		return true
+	}
+	return sel[strings.ToLower(strings.TrimSpace(band))]
+}
+
+// setBandOpenBands records the selection and puts out badges for bands that
+// have just been unticked — they fade on a timer fed by spots the detector no
+// longer looks at, so they would otherwise stay lit until the next restart.
+func (a *App) setBandOpenBands(bands []string) {
+	sel := make(map[string]bool, len(bands))
+	for _, b := range bands {
+		sel[strings.ToLower(strings.TrimSpace(b))] = true
+	}
+	a.bandOpen.bands.Store(sel)
+
+	a.bandOpen.mu.Lock()
+	defer a.bandOpen.mu.Unlock()
+	for b := range a.bandOpen.live {
+		if len(sel) > 0 && !sel[b] {
+			delete(a.bandOpen.live, b)
+			delete(a.bandOpen.aliveUntil, b)
+			applog.Printf("bandopen: %s is no longer watched — badge cleared", strings.ToUpper(b))
+		}
+	}
+}
+
+// clearBandOpenings puts out every lit badge and forgets the detector's window.
+// Called when the watch is switched off: the badges fade on a timer fed by
+// spots the detector no longer looks at, so without this they would stay up
+// until the next restart. The remembered list is left alone — those openings
+// really did happen, and the operator may still want to see what he missed.
+func (a *App) clearBandOpenings() {
+	a.bandOpen.mu.Lock()
+	defer a.bandOpen.mu.Unlock()
+	a.bandOpen.live = nil
+	a.bandOpen.aliveUntil = nil
+	// Drop the accumulated spot window too, so switching the watch back on starts
+	// from what is on the air now rather than from an hour-old burst.
+	a.bandOpen.det = nil
+}
+
+// announceOpening logs and pushes one detection. Shared by both feeds — the
+// cluster path here and the PSK Reporter path in bandopen_sources.go — so an
+// opening reads the same however it was noticed.
+func (a *App) announceOpening(op bandopen.Opening) {
+	applog.Printf("bandopen: %s opening — %d stations, ~%d km, %s%s (%s)",
+		op.Band, op.Calls, op.MedianKm, op.Sector(),
+		map[bool]string{true: "", false: " — UNUSUAL for the season"}[op.InSeason],
+		strings.Join(op.Examples, " "))
+	if a.ctx != nil {
+		wruntime.EventsEmit(a.ctx, "bandopen:detected", op)
+	}
+}
+
+// GetBandOpenings returns the openings seen this session, newest first. The UI
+// polls this so a detection is still visible after its toast has gone.
+func (a *App) GetBandOpenings() []bandopen.Opening {
+	a.bandOpen.mu.Lock()
+	defer a.bandOpen.mu.Unlock()
+	out := make([]bandopen.Opening, len(a.bandOpen.last))
+	copy(out, a.bandOpen.last)
+	return out
+}
+
+// BandOpeningSummary is the one-line form used in the toast and the log.
+func BandOpeningSummary(o bandopen.Opening) string {
+	s := fmt.Sprintf("%s open — %d stations ~%d km, %s", strings.ToUpper(o.Band), o.Calls, o.MedianKm, o.Sector())
+	if !o.InSeason {
+		s += " (unusual for the season)"
+	}
+	return s
+}

bandopening_gate_test.go

@@ -0,0 +1,118 @@
+package main
+
+import (
+	"testing"
+	"time"
+
+	"hamlog/internal/bandopen"
+	"hamlog/internal/cluster"
+)
+
+// The "Watch for band openings" switch has to gate the DETECTOR, not just the
+// extra data sources.
+//
+// It originally governed only the RBN nodes and the PSK Reporter feed, while
+// the detector itself ran on every ordinary cluster spot — so an operator who
+// had never enabled the watch still got opening banners for a feature he had
+// deliberately left off. That is what this pins.
+func TestBandOpenWatchGatesTheDetector(t *testing.T) {
+	spot := func() cluster.Spot {
+		return cluster.Spot{
+			DXCall: "EA1ABC", Band: "6m", DistanceKm: 1400, ShortPath: 210,
+			ReceivedAt: time.Now(),
+		}
+	}
+
+	// Switched off: the spot must not even reach the detector.
+	off := &App{opSet: true, opLat: 48.0, opLon: 2.0}
+	off.detectBandOpening(spot())
+	if off.bandOpen.det != nil {
+		t.Error("the detector ran with the watch switched off")
+	}
+
+	// Switched on: the same spot is accepted (one spot is not an opening, so
+	// nothing is announced — but the detector now exists and is collecting).
+	on := &App{opSet: true, opLat: 48.0, opLon: 2.0}
+	on.bandOpen.on.Store(true)
+	on.detectBandOpening(spot())
+	if on.bandOpen.det == nil {
+		t.Error("the detector did not run with the watch switched on")
+	}
+}
+
+// Switching the watch off must put the badges out. They fade on a timer fed by
+// spots the detector no longer looks at, so left alone they would stay lit
+// until the next restart.
+func TestClearBandOpeningsPutsTheBadgesOut(t *testing.T) {
+	a := &App{}
+	a.bandOpen.live = map[string]bandopen.Opening{"6m": {Band: "6m", Calls: 9}}
+	a.bandOpen.aliveUntil = map[string]time.Time{"6m": time.Now().Add(time.Hour)}
+	a.bandOpen.det = bandopen.New(bandopen.DefaultConfig())
+	a.bandOpen.last = []bandopen.Opening{{Band: "6m", Calls: 9}}
+
+	a.clearBandOpenings()
+
+	if got := a.GetLiveOpenings(); len(got) != 0 {
+		t.Errorf("a badge stayed lit after the watch was switched off: %v", got)
+	}
+	if a.bandOpen.det != nil {
+		t.Error("the accumulated spot window survived — switching back on would start from a stale burst")
+	}
+	// The history is NOT cleared: those openings really happened.
+	if len(a.GetBandOpenings()) != 1 {
+		t.Error("the remembered openings were thrown away")
+	}
+}
+
+// Unticking a band in Settings must actually stop its announcements.
+//
+// Nothing checked the operator's selection on either feed path: bandopen.Watched
+// only says which bands the detector is CAPABLE of. So a station with just 6 m
+// ticked still got 10 m and 2 m badges, from the cluster path and — once grid
+// chasing widened the subscription to every band — from PSK Reporter too.
+func TestBandOpenHonoursTheSelectedBands(t *testing.T) {
+	a := &App{opSet: true, opLat: 48, opLon: 2}
+	a.bandOpen.on.Store(true)
+	a.setBandOpenBands([]string{"6m"})
+
+	if !a.bandOpenWanted("6m") {
+		t.Error("6m is ticked and was refused")
+	}
+	for _, b := range []string{"10m", "2m", "4m"} {
+		if a.bandOpenWanted(b) {
+			t.Errorf("%s is not ticked and was accepted", b)
+		}
+	}
+	// A band the detector cannot watch at all stays out whatever is stored.
+	if a.bandOpenWanted("20m") {
+		t.Error("20m is not a watched band and was accepted")
+	}
+
+	// And the cluster path must obey it too.
+	a.detectBandOpening(cluster.Spot{
+		DXCall: "K1ABC", Band: "10m", DistanceKm: 6000, ShortPath: 280, ReceivedAt: time.Now(),
+	})
+	if a.bandOpen.det != nil {
+		t.Error("a spot on an unticked band reached the detector")
+	}
+}
+
+// Unticking a band puts its badge out. They fade on a timer fed by spots the
+// detector no longer looks at, so it would otherwise stay lit until a restart.
+func TestUntickingABandClearsItsBadge(t *testing.T) {
+	a := &App{}
+	a.bandOpen.live = map[string]bandopen.Opening{
+		"6m":  {Band: "6m", Calls: 9},
+		"10m": {Band: "10m", Calls: 5},
+	}
+	a.bandOpen.aliveUntil = map[string]time.Time{
+		"6m":  time.Now().Add(time.Hour),
+		"10m": time.Now().Add(time.Hour),
+	}
+	a.setBandOpenBands([]string{"6m"})
+
+	live := a.GetLiveOpenings()
+	if len(live) != 1 || live[0].Band != "6m" {
+		t.Errorf("live openings = %v, want only 6m", live)
+	}
+}

bulkfields_test.go

@@ -0,0 +1,35 @@
+package main
+
+import (
+	"testing"
+
+	"hamlog/internal/qso"
+)
+
+// A bulk-editable field passes through THREE tables: the field list in the UI,
+// bulkFieldColumns here, and bulkEditableCols in internal/qso. Mode and RST were
+// added to the first and the third and not the second, so the dialog offered
+// them and the save failed with "unknown field" — reported from the field.
+//
+// Nothing warns about that: each table is valid on its own. This is the check.
+func TestEveryMappedBulkFieldIsWhitelisted(t *testing.T) {
+	for id, col := range bulkFieldColumns {
+		if !qso.BulkEditable(col) {
+			t.Errorf("bulk field %q maps to column %q, which internal/qso refuses to write", id, col)
+		}
+	}
+}
+
+// And the reverse: a column the qso layer allows but nothing maps to is dead
+// weight — it looks supported from the inside and cannot be reached from outside.
+func TestNoUnreachableBulkColumn(t *testing.T) {
+	mapped := map[string]bool{}
+	for _, col := range bulkFieldColumns {
+		mapped[col] = true
+	}
+	for _, col := range qso.BulkEditableColumns() {
+		if !mapped[col] {
+			t.Errorf("column %q is bulk-writable but no field maps to it — unreachable", col)
+		}
+	}
+}

catlinksig_test.go

@@ -0,0 +1,73 @@
+package main
+
+import "testing"
+
+// The whole point of the signature is that pressing Save in Preferences must
+// not drop the rig — and with it every WSJT-X/JTDX client of the shared CAT
+// server, mid-QSO, with an error box. Only a change to the LINK may reconnect.
+func TestCatLinkSigIgnoresNonLinkSettings(t *testing.T) {
+	base := CATSettings{
+		Enabled: true, Backend: "flex", FlexHost: "192.168.1.20", FlexPort: 4992,
+		PollMs: 250, DigitalDefault: "FT8",
+	}
+	same := base
+	// Everything here is applied to the RUNNING manager; none of it justifies a
+	// reconnection, and a spot option in particular must not wipe the panadapter
+	// (a Flex reconnect clears every spot on it).
+	same.PollMs = 500
+	same.DelayMs = 20
+	same.OffsetOn = true
+	same.OffsetHz = 116_000_000
+	same.FlexDecodeSpots = !base.FlexDecodeSpots
+	same.FlexDecodeSecs = 300
+	same.FlexDVKDax = !base.FlexDVKDax
+	same.PTTHotkeyEnabled = true
+	same.PTTHotkey = "Pause"
+	if catLinkSig(base) != catLinkSig(same) {
+		t.Errorf("non-link settings changed the signature:\n%s\n%s", catLinkSig(base), catLinkSig(same))
+	}
+
+	// And the ones that DO describe the connection must still force a restart.
+	for name, mutate := range map[string]func(*CATSettings){
+		"backend":     func(c *CATSettings) { c.Backend = "kenwood" },
+		"flex host":   func(c *CATSettings) { c.FlexHost = "192.168.1.21" },
+		"flex port":   func(c *CATSettings) { c.FlexPort = 4993 },
+		"serial port": func(c *CATSettings) { c.Backend = "yaesu"; c.YaesuPort = "COM7" },
+		"baud":        func(c *CATSettings) { c.Backend = "yaesu"; c.YaesuBaud = 19200 },
+		"civ address": func(c *CATSettings) { c.Backend = "icom"; c.IcomAddr = 152 },
+		"disabled":    func(c *CATSettings) { c.Enabled = false },
+	} {
+		c := base
+		mutate(&c)
+		if catLinkSig(c) == catLinkSig(base) {
+			t.Errorf("%s did not change the signature — the rig would never reconnect", name)
+		}
+	}
+}
+
+// The share server is the thing WSJT-X actually holds a socket to: restarting
+// it is what produced the error box, so it has a signature of its own.
+func TestCatShareSig(t *testing.T) {
+	base := CATSettings{Enabled: true, ShareEnabled: true, ShareProto: "rigctl", SharePort: 4532}
+	other := base
+	other.FlexHost = "10.0.0.5" // a rig-link change must not restart the server
+	if catShareSig(base) != catShareSig(other) {
+		t.Errorf("a rig-link change restarted the share server")
+	}
+	moved := base
+	moved.SharePort = 4533
+	if catShareSig(base) == catShareSig(moved) {
+		t.Errorf("a new port must restart the server")
+	}
+	off := base
+	off.ShareEnabled = false
+	if catShareSig(off) != "off" || catShareSig(off) == catShareSig(base) {
+		t.Errorf("switching sharing off must be a change")
+	}
+	// CAT off means the server has nothing to serve, whatever the share fields say.
+	catOff := base
+	catOff.Enabled = false
+	if catShareSig(catOff) != "off" {
+		t.Errorf("share signature with CAT off = %q, want \"off\"", catShareSig(catOff))
+	}
+}

cmd/cntygen/main.go

@@ -9,6 +9,7 @@ import (
 	"os"
 	"sort"
 	"strings"
+	"unicode/utf8"
 
 	"hamlog/internal/award"
 )
@@ -58,6 +59,15 @@ func main() {
 	sc.Scan() // header
 	for sc.Scan() {
 		line := sc.Text()
+		// The FIPS CSV is not reliably UTF-8, and the one county whose name is
+		// not ASCII (Doña Ana, NM) came through mangled once already — it landed
+		// in the reference as "NM/DO̱AANA", a code no log could ever match,
+		// silently costing that county for every operator. Refuse the row rather
+		// than emit a broken one.
+		if !utf8.ValidString(line) {
+			fmt.Fprintf(os.Stderr, "cntygen: skipping non-UTF-8 line: %q\n", line)
+			continue
+		}
 		parts := strings.SplitN(line, ",", 3)
 		if len(parts) < 3 {
 			continue

cmd/ctzipgen/main.go

@@ -0,0 +1,203 @@
+package main
+
+// One-shot generator: emits internal/uls/ctcounty_gen.go, the Connecticut
+// ZIP → legal county table. Not part of the build.
+//
+// Why it has to exist
+// -------------------
+// internal/uls resolves a US callsign to a county through GeoNames' ZIP table.
+// The Census replaced Connecticut's eight counties with nine PLANNING REGIONS
+// as county-equivalents in 2022, and GeoNames followed: 418 of Connecticut's
+// 429 ZIPs now report "Capitol Region", "Lower Connecticut River Valley" and
+// so on. CQ's USA-CA award did not follow, callbooks did not follow, and no
+// operator's log did either — so every Connecticut station resolved to a name
+// nothing could match, showed as a new county for ever, and counted for no
+// award. Roughly 15 000 US callsigns.
+//
+// A planning region is NOT a renamed county — it is built from towns drawn
+// from several different counties — so there is no name-to-name mapping to be
+// had. The ZIP is the only handle, hence this table.
+//
+// Sources (both public, both free)
+// --------------------------------
+//	geonames  US.txt from https://download.geonames.org/export/zip/US.zip
+//	          — the ZIP list itself, and each ZIP's centroid.
+//	crosswalk https://www2.census.gov/geo/docs/maps-data/data/rel2020/
+//	          zcta520/tab20_zcta520_county20_natl.txt
+//	          — the 2020 ZCTA↔county relationship file, which predates the
+//	            change and therefore still carries the eight real counties.
+//
+// The crosswalk covers 278 of the 418 affected ZIPs. The rest are PO-box-only
+// ZIPs, which have no ZCTA at all; each is given the county of the nearest
+// resolved ZIP centroid. That is sound here because a PO-box ZIP sits inside
+// the town it serves, and Connecticut's counties are tens of kilometres across
+// — the fallback can only err on a ZIP that straddles a county line, which the
+// ZIP-to-county approach is already documented as accepting (~98%).
+//
+// Usage:
+//
+//	go run ./cmd/ctzipgen US.txt tab20_zcta520_county20_natl.txt > internal/uls/ctcounty_gen.go
+
+import (
+	"bufio"
+	"fmt"
+	"math"
+	"os"
+	"sort"
+	"strconv"
+	"strings"
+)
+
+type zipPt struct {
+	zip      string
+	lat, lon float64
+	county   string // from the crosswalk, "" if the ZIP has no ZCTA
+	geoName  string // what GeoNames says today
+}
+
+func main() {
+	if len(os.Args) < 3 {
+		fmt.Fprintln(os.Stderr, "usage: ctzipgen US.txt tab20_zcta520_county20_natl.txt")
+		os.Exit(2)
+	}
+
+	// 1. Every Connecticut ZIP, with its centroid, from GeoNames.
+	var pts []*zipPt
+	byZip := map[string]*zipPt{}
+	f, err := os.Open(os.Args[1])
+	must(err)
+	sc := bufio.NewScanner(f)
+	sc.Buffer(make([]byte, 0, 64*1024), 256*1024)
+	for sc.Scan() {
+		c := strings.Split(sc.Text(), "\t")
+		if len(c) < 11 || strings.ToUpper(strings.TrimSpace(c[4])) != "CT" {
+			continue
+		}
+		z := strings.TrimSpace(c[1])
+		if z == "" || byZip[z] != nil {
+			continue
+		}
+		p := &zipPt{zip: z, lat: atof(c[9]), lon: atof(c[10]), geoName: strings.TrimSpace(c[5])}
+		byZip[z] = p
+		pts = append(pts, p)
+	}
+	must(sc.Err())
+	f.Close()
+
+	// 2. The 2020 county for each ZCTA. A ZCTA can straddle a county line, so
+	//    keep the county holding the largest share of its land area.
+	best := map[string]float64{}
+	f2, err := os.Open(os.Args[2])
+	must(err)
+	sc2 := bufio.NewScanner(f2)
+	sc2.Buffer(make([]byte, 0, 64*1024), 1<<20)
+	sc2.Scan() // header
+	for sc2.Scan() {
+		c := strings.Split(sc2.Text(), "|")
+		if len(c) < 18 || !strings.HasPrefix(c[9], "09") {
+			continue
+		}
+		p := byZip[strings.TrimSpace(c[1])]
+		if p == nil {
+			continue
+		}
+		area := atof(c[16])
+		if p.county != "" && area <= best[p.zip] {
+			continue
+		}
+		best[p.zip] = area
+		p.county = strings.TrimSuffix(strings.TrimSpace(c[10]), " County")
+	}
+	must(sc2.Err())
+	f2.Close()
+
+	// 3. Fill the PO-box-only ZIPs from the nearest ZIP the crosswalk resolved.
+	var anchors []*zipPt
+	for _, p := range pts {
+		if p.county != "" {
+			anchors = append(anchors, p)
+		}
+	}
+	if len(anchors) == 0 {
+		fmt.Fprintln(os.Stderr, "ctzipgen: crosswalk resolved nothing — wrong file?")
+		os.Exit(1)
+	}
+	filled := 0
+	for _, p := range pts {
+		if p.county != "" {
+			continue
+		}
+		nearest, bestD := "", math.MaxFloat64
+		for _, a := range anchors {
+			if d := haversine(p.lat, p.lon, a.lat, a.lon); d < bestD {
+				bestD, nearest = d, a.county
+			}
+		}
+		p.county = nearest
+		filled++
+	}
+
+	// 4. Self-check: the ZIPs GeoNames still labels with a real county must
+	//    agree with what we derived, or the derivation is wrong.
+	real := map[string]bool{
+		"Fairfield": true, "Hartford": true, "Litchfield": true, "Middlesex": true,
+		"New Haven": true, "New London": true, "Tolland": true, "Windham": true,
+	}
+	checked, bad := 0, 0
+	for _, p := range pts {
+		if !real[p.geoName] {
+			continue
+		}
+		checked++
+		if p.geoName != p.county {
+			bad++
+			fmt.Fprintf(os.Stderr, "MISMATCH %s: geonames %q, derived %q\n", p.zip, p.geoName, p.county)
+		}
+	}
+	fmt.Fprintf(os.Stderr, "ctzipgen: %d zips, %d from crosswalk, %d by nearest; cross-check %d/%d agree\n",
+		len(pts), len(pts)-filled, filled, checked-bad, checked)
+	if bad > 0 {
+		os.Exit(1)
+	}
+
+	sort.Slice(pts, func(i, j int) bool { return pts[i].zip < pts[j].zip })
+
+	var b strings.Builder
+	b.WriteString("// Code generated by cmd/ctzipgen. DO NOT EDIT.\n\n")
+	b.WriteString("package uls\n\n")
+	b.WriteString("// ctCounty maps a Connecticut ZIP to its legal county.\n")
+	b.WriteString("//\n")
+	b.WriteString("// GeoNames reports Connecticut's 2022 planning regions instead, which no\n")
+	b.WriteString("// award, callbook or log uses. See cmd/ctzipgen for how this was built and\n")
+	b.WriteString("// why a name-to-name mapping cannot work.\n")
+	fmt.Fprintf(&b, "var ctCounty = map[string]string{\n")
+	for _, p := range pts {
+		fmt.Fprintf(&b, "\t%q: %q,\n", p.zip, p.county)
+	}
+	b.WriteString("}\n")
+	fmt.Print(b.String())
+}
+
+func atof(s string) float64 {
+	v, _ := strconv.ParseFloat(strings.TrimSpace(s), 64)
+	return v
+}
+
+// haversine returns the great-circle distance in km. Connecticut is small
+// enough that a flat approximation would do, but this costs nothing and cannot
+// be wrong near the state's edges.
+func haversine(lat1, lon1, lat2, lon2 float64) float64 {
+	const r = 6371.0
+	dLat := (lat2 - lat1) * math.Pi / 180
+	dLon := (lon2 - lon1) * math.Pi / 180
+	a := math.Sin(dLat/2)*math.Sin(dLat/2) +
+		math.Cos(lat1*math.Pi/180)*math.Cos(lat2*math.Pi/180)*math.Sin(dLon/2)*math.Sin(dLon/2)
+	return 2 * r * math.Asin(math.Sqrt(a))
+}
+
+func must(err error) {
+	if err != nil {
+		fmt.Fprintln(os.Stderr, "ctzipgen:", err)
+		os.Exit(1)
+	}
+}

cmd/dbdiag/main.go

@@ -109,9 +109,9 @@ func probeWB(conn *sql.DB, call string, dxcc int) {
         SELECT band, mode,
                MAX(CASE WHEN callsign = ? THEN 1 ELSE 0 END),
                MAX(CASE WHEN callsign = ?
-                         AND (lotw_rcvd = 'Y' OR qsl_rcvd = 'Y' OR eqsl_rcvd = 'Y')
+                         AND (lotw_rcvd IN ('Y','V') OR qsl_rcvd IN ('Y','V') OR eqsl_rcvd IN ('Y','V'))
                         THEN 1 ELSE 0 END),
-               MAX(CASE WHEN lotw_rcvd = 'Y' OR qsl_rcvd = 'Y' OR eqsl_rcvd = 'Y'
+               MAX(CASE WHEN lotw_rcvd IN ('Y','V') OR qsl_rcvd IN ('Y','V') OR eqsl_rcvd IN ('Y','V')
                         THEN 1 ELSE 0 END)
         FROM qso WHERE dxcc = ?
         GROUP BY band, mode

compact.go

@@ -0,0 +1,102 @@
+package main
+
+// Compacting a database.
+//
+// SQLite never shrinks a file on its own: deleting rows — or dropping a table,
+// which is what the schema-role cleanup does — frees pages INSIDE the file and
+// leaves the file the size it always was. A logbook that held 200 000 imported
+// QSOs for a day is still a 200 MB file the day after they are gone, and the
+// only thing that reclaims the space is a VACUUM, which rewrites the database
+// from scratch.
+//
+// Offered as a button rather than done automatically: a VACUUM rewrites the
+// whole file, needs room for a second copy of it while it runs, and takes real
+// time on a large logbook. That is a decision for the operator, at a moment they
+// choose — not something to spring on them during startup.
+
+import (
+	"database/sql"
+	"fmt"
+	"os"
+	"strings"
+
+	"hamlog/internal/applog"
+)
+
+// CompactResult is what one compaction did.
+type CompactResult struct {
+	// Path of the file compacted, empty for MySQL.
+	Path string `json:"path"`
+	// Backend is "sqlite" or "mysql" — a shared server is optimised, not vacuumed.
+	Backend string `json:"backend"`
+	// Before and After are file sizes in bytes; both 0 when there is no file.
+	Before int64 `json:"before"`
+	After  int64 `json:"after"`
+}
+
+// CompactDatabase reclaims the unused space in one of the two databases.
+//
+// target is "settings" or "logbook". They are separate on purpose: they are
+// different files, of very different sizes, and an operator compacting a 400 MB
+// logbook has no reason to wait on a 2 MB settings file as well.
+func (a *App) CompactDatabase(target string) (CompactResult, error) {
+	switch strings.ToLower(strings.TrimSpace(target)) {
+	case "settings":
+		if a.db == nil {
+			return CompactResult{}, fmt.Errorf("the settings database is not open")
+		}
+		return a.vacuumSQLite(a.db, a.dbPath)
+	case "logbook":
+		if a.logDb == nil {
+			return CompactResult{}, fmt.Errorf("the logbook is not open")
+		}
+		if a.dbBackend == "mysql" {
+			// A shared server's storage is the admin's business, and OPTIMIZE TABLE
+			// locks the table for the length of a rebuild — every other operator
+			// waits. Still offered, because a logbook that has had a large import
+			// deleted benefits from it just as much; it simply reports no sizes,
+			// which the server alone knows.
+			if _, err := a.logDb.ExecContext(a.ctx, "OPTIMIZE TABLE qso"); err != nil {
+				return CompactResult{}, fmt.Errorf("optimize qso: %w", err)
+			}
+			applog.Printf("compact: OPTIMIZE TABLE qso on the shared MySQL logbook")
+			return CompactResult{Backend: "mysql"}, nil
+		}
+		// No separate file: the settings database is serving as the logbook, and
+		// compacting it is the same operation.
+		if a.logDbPath == "" {
+			return a.vacuumSQLite(a.db, a.dbPath)
+		}
+		return a.vacuumSQLite(a.logDb, a.logDbPath)
+	}
+	return CompactResult{}, fmt.Errorf("unknown database %q", target)
+}
+
+// vacuumSQLite checkpoints the write-ahead log, then rewrites the file.
+func (a *App) vacuumSQLite(conn *sql.DB, path string) (CompactResult, error) {
+	res := CompactResult{Path: path, Backend: "sqlite", Before: fileSizeOf(path)}
+	// Fold the WAL back into the main file first. Without it the pages freed by a
+	// recent DELETE can still be sitting in the -wal, and the vacuum reports a
+	// saving the file on disk does not show.
+	if _, err := conn.ExecContext(a.ctx, "PRAGMA wal_checkpoint(TRUNCATE)"); err != nil {
+		applog.Printf("compact: wal checkpoint on %s: %v", path, err)
+	}
+	if _, err := conn.ExecContext(a.ctx, "VACUUM"); err != nil {
+		return res, fmt.Errorf("vacuum: %w", err)
+	}
+	res.After = fileSizeOf(path)
+	applog.Printf("compact: %s %d → %d bytes", path, res.Before, res.After)
+	return res, nil
+}
+
+// fileSizeOf returns a file's size, or 0 if it cannot be read.
+func fileSizeOf(path string) int64 {
+	if strings.TrimSpace(path) == "" {
+		return 0
+	}
+	fi, err := os.Stat(path)
+	if err != nil {
+		return 0
+	}
+	return fi.Size()
+}

copydir_test.go

@@ -0,0 +1,61 @@
+package main
+
+import (
+	"os"
+	"path/filepath"
+	"testing"
+)
+
+// TestCopyDirContentsCreatesDestination pins the bug that broke copying a QSL
+// design between profiles.
+//
+// copyDirContents wrote straight into dst without creating it, so the first
+// os.Create failed with ENOENT. The caller was written as "ignore
+// os.IsNotExist", meaning "the source has no assets, that is fine" — and ENOENT
+// from the failed write matched it exactly. Nothing was copied, no error was
+// reported, and the operator saw "copied design is incomplete: hero photo file
+// … not found" from the validation two lines later.
+func TestCopyDirContentsCreatesDestination(t *testing.T) {
+	base := t.TempDir()
+	src := filepath.Join(base, "src")
+	if err := os.MkdirAll(filepath.Join(src, "sub"), 0o755); err != nil {
+		t.Fatal(err)
+	}
+	if err := os.WriteFile(filepath.Join(src, "img_25c06bda.jpg"), []byte("hero"), 0o644); err != nil {
+		t.Fatal(err)
+	}
+	if err := os.WriteFile(filepath.Join(src, "sub", "back.png"), []byte("back"), 0o644); err != nil {
+		t.Fatal(err)
+	}
+
+	// dst does not exist — the case of every first copy.
+	dst := filepath.Join(base, "dst")
+	if err := copyDirContents(src, dst); err != nil {
+		t.Fatalf("copyDirContents: %v", err)
+	}
+	for name, want := range map[string]string{
+		"img_25c06bda.jpg": "hero",
+		"sub/back.png":     "back",
+	} {
+		got, err := os.ReadFile(filepath.Join(dst, filepath.FromSlash(name)))
+		if err != nil {
+			t.Errorf("%s: %v", name, err)
+			continue
+		}
+		if string(got) != want {
+			t.Errorf("%s = %q, want %q", name, got, want)
+		}
+	}
+}
+
+// A missing SOURCE is still an error from copyDirContents itself — it is the
+// caller that decides whether a design with no pictures is acceptable, and it
+// can only decide that if this does not quietly succeed.
+func TestCopyDirContentsMissingSource(t *testing.T) {
+	base := t.TempDir()
+	if err := copyDirContents(filepath.Join(base, "nope"), filepath.Join(base, "dst")); err == nil {
+		t.Fatal("copying a missing source returned no error")
+	} else if !os.IsNotExist(err) {
+		t.Fatalf("want a not-exist error, got %v", err)
+	}
+}

decodegrids_test.go

@@ -0,0 +1,160 @@
+package main
+
+import (
+	"fmt"
+	"path/filepath"
+	"sync"
+	"testing"
+
+	"hamlog/internal/gridcache"
+)
+
+// The grid cache used to drop EVERYTHING at its ceiling. That was survivable
+// while the only feed was this station's own decodes, which never reached it.
+// Fed by anything larger it is a cliff: every locator in the cluster list
+// disappears at once, periodically, and the operator sees the column empty
+// itself for no reason.
+//
+// Rotation keeps the previous generation, so a full cache costs the older half
+// and nothing more.
+func TestDecodeGridRotationKeepsThePreviousGeneration(t *testing.T) {
+	a := &App{}
+
+	// Fill exactly one generation.
+	for i := 0; i < decodeGridsCap; i++ {
+		a.rememberDecodeGrid(fmt.Sprintf("CALL%06d", i), "JN36", gridcache.SourceDecode)
+	}
+	if got := a.lookupDecodeGrid("CALL000000"); got != "JN36" {
+		t.Fatalf("first entry lost before any rotation: %q", got)
+	}
+	if a.decodeGridsOld != nil {
+		t.Fatal("rotated early — the cap is the ceiling of ONE generation")
+	}
+
+	// One more entry rotates.
+	a.rememberDecodeGrid("NEWCALL", "IO91", gridcache.SourceDecode)
+	if a.decodeGridsOld == nil {
+		t.Fatal("did not rotate at the cap")
+	}
+	if got := a.lookupDecodeGrid("NEWCALL"); got != "IO91" {
+		t.Errorf("the entry that caused the rotation was lost: %q", got)
+	}
+	// The whole previous generation is still readable — this is the point.
+	if got := a.lookupDecodeGrid("CALL000000"); got != "JN36" {
+		t.Errorf("a locator from the previous generation was dropped: %q — that is the cliff again", got)
+	}
+	if got := a.lookupDecodeGrid("CALL099999"); got != "JN36" {
+		t.Errorf("previous generation incomplete: %q", got)
+	}
+
+	// A second rotation is what finally retires the oldest half.
+	for i := 0; i < decodeGridsCap; i++ {
+		a.rememberDecodeGrid(fmt.Sprintf("SECOND%06d", i), "KP20", gridcache.SourceDecode)
+	}
+	if got := a.lookupDecodeGrid("CALL000000"); got != "" {
+		t.Errorf("the cache is unbounded: %q survived two rotations", got)
+	}
+	if got := a.lookupDecodeGrid("NEWCALL"); got != "IO91" {
+		t.Errorf("an entry one generation old was retired too early: %q", got)
+	}
+}
+
+// Callsigns are normalised on the way in AND on the way out, or a spot for
+// "f4bpo" would miss a grid learnt as "F4BPO".
+func TestDecodeGridCaseAndBlanks(t *testing.T) {
+	a := &App{}
+	a.rememberDecodeGrid(" f4bpo ", "JN36", gridcache.SourceDecode)
+	if got := a.lookupDecodeGrid("F4BPO"); got != "JN36" {
+		t.Errorf("lookup of the upper-case form failed: %q", got)
+	}
+	a.rememberDecodeGrid("", "JN36", gridcache.SourceDecode)
+	a.rememberDecodeGrid("K1ABC", "", gridcache.SourceDecode)
+	if got := a.lookupDecodeGrid("K1ABC"); got != "" {
+		t.Errorf("stored an empty grid: %q", got)
+	}
+}
+
+// The write path runs on the decode goroutine while the cluster status builder
+// reads. Rotation swaps the map headers, so an unguarded read is a data race
+// rather than a stale value.
+//
+// This build is CGO-free, so -race is not available here; the test exercises the
+// interleaving and would fault on a concurrent map access even without it.
+func TestDecodeGridConcurrentAccess(t *testing.T) {
+	a := &App{}
+	var wg sync.WaitGroup
+	wg.Add(2)
+	go func() {
+		defer wg.Done()
+		for i := 0; i < 20000; i++ {
+			a.rememberDecodeGrid(fmt.Sprintf("W%05d", i), "FN31", gridcache.SourceDecode)
+		}
+	}()
+	go func() {
+		defer wg.Done()
+		for i := 0; i < 20000; i++ {
+			_ = a.lookupDecodeGrid(fmt.Sprintf("W%05d", i))
+		}
+	}()
+	wg.Wait()
+}
+
+// Only a CHANGE may reach the write batch.
+//
+// The feeds repeat themselves — the same station is reported by dozens of
+// receivers a minute — so queueing every report would put the whole stream in
+// the batch instead of the news in it, and turn a cache into a write amplifier.
+func TestOnlyChangesAreQueued(t *testing.T) {
+	st, err := gridcache.Open(filepath.Join(t.TempDir(), "grids.db"), nil)
+	if err != nil {
+		t.Fatal(err)
+	}
+	defer st.Close()
+	a := &App{gridStore: st}
+
+	a.rememberDecodeGrid("F4BPO", "JN36", gridcache.SourceDecode)
+	if n := st.Pending(); n != 1 {
+		t.Fatalf("a new locator queued %d writes, want 1", n)
+	}
+	if err := st.Flush(); err != nil {
+		t.Fatal(err)
+	}
+
+	// The same report, a hundred times over, is not news.
+	for i := 0; i < 100; i++ {
+		a.rememberDecodeGrid("F4BPO", "JN36", gridcache.SourceDecode)
+	}
+	if n := st.Pending(); n != 0 {
+		t.Errorf("unchanged reports queued %d writes — the batch would carry the whole feed", n)
+	}
+
+	// A station that moved is.
+	a.rememberDecodeGrid("F4BPO", "KP30", gridcache.SourceDecode)
+	if n := st.Pending(); n != 1 {
+		t.Errorf("a changed locator queued %d writes, want 1", n)
+	}
+	if got := a.lookupDecodeGrid("F4BPO"); got != "KP30" {
+		t.Errorf("the map kept the old locator: %q", got)
+	}
+}
+
+// Rotation must be OFF while a store is attached: it would discard callsigns the
+// database still holds, and the lookup would then miss something we know.
+func TestNoRotationWhilePersisting(t *testing.T) {
+	st, err := gridcache.Open(filepath.Join(t.TempDir(), "grids.db"), nil)
+	if err != nil {
+		t.Fatal(err)
+	}
+	defer st.Close()
+	a := &App{gridStore: st}
+
+	for i := 0; i < decodeGridsCap+10; i++ {
+		a.rememberDecodeGrid(fmt.Sprintf("CALL%06d", i), "JN36", gridcache.SourceDecode)
+	}
+	if a.decodeGridsOld != nil {
+		t.Error("rotated while a store was attached — locators the database holds would go missing")
+	}
+	if got := a.lookupDecodeGrid("CALL000000"); got != "JN36" {
+		t.Errorf("the first entry was dropped: %q", got)
+	}
+}

flexpower_test.go

@@ -0,0 +1,25 @@
+package main
+
+import "testing"
+
+// Which class of power a mode falls into.
+//
+// This decides how much power leaves the amplifier, so an error here is not a
+// display bug: a digital mode sorted as phone gets the SSB setting, which is
+// exactly the 1.5 kW into a 100% duty cycle this feature exists to prevent.
+func TestFlexPowerClass(t *testing.T) {
+	for _, c := range []struct{ mode, want string }{
+		{"SSB", "phone"}, {"USB", "phone"}, {"LSB", "phone"}, {"AM", "phone"}, {"FM", "phone"},
+		{"CW", "cw"}, {"cw", "cw"}, {" CW ", "cw"},
+		{"FT8", "digi"}, {"FT4", "digi"}, {"RTTY", "digi"}, {"PSK31", "digi"},
+		{"JS8", "digi"}, {"Q65", "digi"}, {"MSK144", "digi"}, {"DATA", "digi"},
+		{"DIGU", "digi"}, {"DIGL", "digi"}, {"WSPR", "digi"},
+		// Unknown or empty: no class, and the caller changes nothing. Setting a
+		// transmit power from a name we do not recognise is not a good guess.
+		{"", ""}, {"SSTV", ""}, {"BANANA", ""},
+	} {
+		if got := flexPowerClass(c.mode); got != c.want {
+			t.Errorf("flexPowerClass(%q) = %q, want %q", c.mode, got, c.want)
+		}
+	}
+}

flexzoom.go

@@ -0,0 +1,122 @@
+package main
+
+// Panadapter auto-zoom on a spot click.
+//
+// A CW signal is 100 Hz wide, an FT8 slot 50 Hz in a 3 kHz sub-band, an SSB
+// station 2.7 kHz. One panadapter width cannot serve all three: at 200 kHz the
+// CW station you clicked is a hair, and at 25 kHz an FT8 window shows one
+// eighth of the traffic. So the width follows the MODE of the spot, which is
+// the only thing that determines how much spectrum is worth looking at.
+//
+// The command is SmartSDR's own: "display pan s <pan> bandwidth=<MHz>", with an
+// optional re-centre. Same approach as DXHunter, which is where the defaults
+// below come from.
+
+import (
+	"encoding/json"
+	"strings"
+
+	"hamlog/internal/cat"
+)
+
+const keyFlexZoom = "flex.spot_zoom"
+
+// FlexZoomSettings is the per-mode-group visible width, in kHz.
+//
+// kHz and not MHz: an operator thinks "25 kHz of CW", and a form asking for
+// 0.025 invites a zero too many — which on a panadapter is not an error message
+// but a display that has silently gone somewhere else.
+type FlexZoomSettings struct {
+	Enabled bool `json:"enabled"`
+	CWkHz   int  `json:"cw_khz"`
+	SSBkHz  int  `json:"ssb_khz"`
+	DigikHz int  `json:"digi_khz"`
+	// Centre re-centres the panadapter on EVERY spot, not just the ones that
+	// would otherwise fall outside the new window — the display always follows.
+	// Off by default: an operator who has arranged their window around a run
+	// frequency does not necessarily want it moved every time they look at
+	// someone else, and a spot already on screen stays where it is either way.
+	Centre bool `json:"centre"`
+}
+
+// defaultFlexZoom — the widths DXHunter settled on, in kHz.
+var defaultFlexZoom = FlexZoomSettings{Enabled: false, CWkHz: 25, SSBkHz: 200, DigikHz: 50, Centre: false}
+
+// flexZoomGroup maps a spot's mode to the three widths worth distinguishing.
+//
+// The mode arrives as whatever the cluster comment implied — "CW", "FT8",
+// "USB", "RTTY" — so this takes the ADIF-ish name, not the Flex one. Anything
+// unrecognised is digital, which is the safe end: a 50 kHz window is readable
+// for every mode, where 25 kHz is not.
+func flexZoomGroup(mode string) string {
+	switch strings.ToUpper(strings.TrimSpace(mode)) {
+	case "CW", "CWR", "CWL", "CWU":
+		return "cw"
+	case "SSB", "USB", "LSB", "AM", "FM", "NFM", "DFM", "SAM", "PHONE", "DV":
+		return "ssb"
+	}
+	return "digi"
+}
+
+// GetFlexZoom returns the settings, defaults included.
+func (a *App) GetFlexZoom() FlexZoomSettings {
+	out := defaultFlexZoom
+	if raw := a.settingOr(keyFlexZoom, ""); raw != "" {
+		var s FlexZoomSettings
+		if err := json.Unmarshal([]byte(raw), &s); err == nil {
+			out = normFlexZoom(s)
+		}
+	}
+	return out
+}
+
+// normFlexZoom clamps the widths to something a panadapter can actually show.
+// 1 kHz is narrower than most filters; 14 MHz is a whole HF spectrum.
+func normFlexZoom(s FlexZoomSettings) FlexZoomSettings {
+	clamp := func(v, def int) int {
+		if v < 1 || v > 14000 {
+			return def
+		}
+		return v
+	}
+	s.CWkHz = clamp(s.CWkHz, defaultFlexZoom.CWkHz)
+	s.SSBkHz = clamp(s.SSBkHz, defaultFlexZoom.SSBkHz)
+	s.DigikHz = clamp(s.DigikHz, defaultFlexZoom.DigikHz)
+	return s
+}
+
+// SaveFlexZoom persists the settings.
+func (a *App) SaveFlexZoom(s FlexZoomSettings) error {
+	b, err := json.Marshal(normFlexZoom(s))
+	if err != nil {
+		return err
+	}
+	a.setSetting(keyFlexZoom, string(b))
+	return nil
+}
+
+// FlexZoomForSpot resizes the panadapter for a spot that was just clicked.
+//
+// Called from the click handler, AFTER the rig has been tuned: the zoom is a
+// view change and must never delay the frequency change an operator is waiting
+// for. Does nothing at all unless the option is on and the backend is a Flex —
+// no other radio has a panadapter to zoom.
+func (a *App) FlexZoomForSpot(mode string, freqHz int64) {
+	if a.cat == nil {
+		return
+	}
+	z := a.GetFlexZoom()
+	if !z.Enabled {
+		return
+	}
+	khz := z.DigikHz
+	switch flexZoomGroup(mode) {
+	case "cw":
+		khz = z.CWkHz
+	case "ssb":
+		khz = z.SSBkHz
+	}
+	_ = a.cat.FlexDo(func(fc cat.FlexController) error {
+		return fc.ZoomPan(float64(khz)/1000, float64(freqHz)/1e6, z.Centre)
+	})
+}

flexzoom_test.go

@@ -0,0 +1,32 @@
+package main
+
+import "testing"
+
+// The width follows the mode, and an unrecognised mode must land on the widest
+// of the three: a 50 kHz window is readable for everything, where 25 kHz shows
+// one eighth of an FT8 sub-band.
+func TestFlexZoomGroup(t *testing.T) {
+	for mode, want := range map[string]string{
+		"CW": "cw", "cw": "cw", "CWR": "cw",
+		"SSB": "ssb", "USB": "ssb", "LSB": "ssb", "FM": "ssb", "AM": "ssb",
+		"FT8": "digi", "FT4": "digi", "RTTY": "digi", "JS8": "digi", "PSK31": "digi",
+		"": "digi", "something new": "digi",
+	} {
+		if got := flexZoomGroup(mode); got != want {
+			t.Errorf("flexZoomGroup(%q) = %q, want %q", mode, got, want)
+		}
+	}
+}
+
+// A width of zero would command "bandwidth=0.000000" and take the panadapter
+// somewhere the operator cannot get back from by eye.
+func TestNormFlexZoomClamps(t *testing.T) {
+	got := normFlexZoom(FlexZoomSettings{CWkHz: 0, SSBkHz: -5, DigikHz: 99999})
+	if got.CWkHz != defaultFlexZoom.CWkHz || got.SSBkHz != defaultFlexZoom.SSBkHz || got.DigikHz != defaultFlexZoom.DigikHz {
+		t.Errorf("out-of-range widths not replaced by the defaults: %+v", got)
+	}
+	ok := normFlexZoom(FlexZoomSettings{CWkHz: 10, SSBkHz: 150, DigikHz: 40})
+	if ok.CWkHz != 10 || ok.SSBkHz != 150 || ok.DigikHz != 40 {
+		t.Errorf("valid widths must be kept as they are: %+v", ok)
+	}
+}

frontend/src/components/AlertsModal.tsx

@@ -1,4 +1,4 @@
-import { useCallback, useEffect, useMemo, useState } from 'react';
+import { useCallback, useEffect, useMemo, useRef, useState } from 'react';
 import { Bell, Plus, Trash2, Volume2, Mail, Eye, X, Search } from 'lucide-react';
 import {
   Dialog, DialogContent, DialogHeader, DialogTitle, DialogDescription,
@@ -102,17 +102,40 @@ export function AlertsModal({ onClose, bands, modes, countries }: {
     return alerts.Rule.createFrom({ ...d, [key]: next });
   });
 
+  // Saving used to be silent: the dialog stays open and the rule looks exactly
+  // as it did a second earlier, so there was nothing to tell an operator whether
+  // the click had registered. A line that says so, and clears itself.
+  const [savedMsg, setSavedMsg] = useState('');
+  const savedTimer = useRef(0);
+  function flashSaved(text: string) {
+    setSavedMsg(text);
+    window.clearTimeout(savedTimer.current);
+    savedTimer.current = window.setTimeout(() => setSavedMsg(''), 3000);
+  }
+  useEffect(() => () => window.clearTimeout(savedTimer.current), []);
+
   async function save() {
     if (!draft) return;
     if (!draft.name.trim()) { setErr(t('altm.giveName')); return; }
-    try { const saved = await SaveAlertRule(draft); await refresh(); loadDraft(saved as Rule); setErr(''); }
+    try {
-    catch (e: any) { setErr(String(e?.message ?? e)); }
+      const saved = await SaveAlertRule(draft);
+      await refresh();
+      loadDraft(saved as Rule);
+      setErr('');
+      flashSaved(t('altm.saved', { name: draft.name.trim() }));
+    } catch (e: any) { setErr(String(e?.message ?? e)); }
   }
   async function del() {
     if (!draft) return;
     if (!draft.id) { loadDraft(null); return; }
     if (!window.confirm(t('altm.deleteConfirm', { name: draft.name }))) return;
-    try { await DeleteAlertRule(draft.id); loadDraft(null); await refresh(); }
+    try {
+      const name = draft.name;
+      await DeleteAlertRule(draft.id);
+      loadDraft(null);
+      await refresh();
+      flashSaved(t('altm.deleted', { name }));
+    }
     catch (e: any) { setErr(String(e?.message ?? e)); }
   }
 
@@ -257,6 +280,7 @@ export function AlertsModal({ onClose, bands, modes, countries }: {
                 {/* Editor actions */}
                 <div className="flex items-center gap-2 px-3 py-2 border-t border-border/60">
                   {err && <span className="text-[11px] text-danger flex-1 truncate">{err}</span>}
+                  {!err && savedMsg && <span className="text-[11px] text-success flex-1 truncate">{savedMsg}</span>}
                   <div className="flex-1" />
                   <Button variant="ghost" size="sm" className="text-danger" onClick={del}><Trash2 className="size-3.5" /> {t('altm.delete')}</Button>
                   <Button size="sm" onClick={save}>{t('altm.saveRule')}</Button>

frontend/src/components/AmpCard.tsx

@@ -51,11 +51,14 @@ type Amp = { id: string; name: string; type?: string; spe?: any; acom?: any; pgx
 
 export function AmpCard({ amp, flex, t }: { amp: Amp; flex: any; t: (k: string, v?: any) => string }) {
   // Peak-hold so the jittery VITA-49 meters read steadily (own ref per card).
+  // One second: the same window as the docked widget, so the two never show
+  // different figures for the same amplifier, and neither trails the end of a
+  // transmission long enough to look like lag.
   const peak = useRef<Record<string, { v: number; t: number }>>({});
   const peakHold = (key: string, val: number) => {
     const now = Date.now();
     const p = peak.current[key];
-    if (!p || val >= p.v || now - p.t > 2000) { peak.current[key] = { v: val, t: now }; return val; }
+    if (!p || val >= p.v || now - p.t > 1000) { peak.current[key] = { v: val, t: now }; return val; }
     return p.v;
   };
 
@@ -73,9 +76,12 @@ export function AmpCard({ amp, flex, t }: { amp: Amp; flex: any; t: (k: string,
               spe.operate ? 'bg-warning text-warning-foreground border-warning shadow-[0_0_14px] shadow-warning/50' : 'bg-card text-warning border-warning hover:bg-warning-muted')}>
             {spe.operate ? 'OPERATE' : 'STANDBY'}
           </button>
+          {/* Power ON pulses RTS then DTR — it must stay clickable while the amp
+              is off (no status = not "connected"), and serial only. */}
           <div className="inline-flex rounded-lg overflow-hidden border-2 border-success/70">
-            <button type="button" disabled={!spe.connected}
+            <button type="button" disabled={!(spe.connected || spe.transport === 'serial')}
               onClick={() => AmpPower(amp.id, true).catch(() => {})}
+              title={spe.transport === 'serial' ? 'Power on (RTS then DTR pulse)' : 'Power-on needs the serial RTS/DTR lines — not available over a network bridge'}
               className="px-3 py-2 text-sm font-bold bg-card text-success hover:bg-success/15 disabled:opacity-30">ON</button>
             <button type="button" disabled={!spe.connected}
               onClick={() => AmpPower(amp.id, false).catch(() => {})}
@@ -168,6 +174,45 @@ export function AmpCard({ amp, flex, t }: { amp: Amp; flex: any; t: (k: string,
   const operate = viaFlex ? !!flex?.amp_operate : !!pg.operate;
   const connected = !!pg.connected || viaFlex;
   const fault = flex?.amp_fault;
+
+  // Meters built from the amplifier's own GSCP status frame, for when the radio
+  // is not feeding a meter stream.
+  //
+  // Whether there is power is the amp's state field; how much is the plain
+  // forward figure. NOT "peakfwd" — that is a latched maximum which is never
+  // reset and survives in the last-known status after the amp disconnects, so it
+  // once claimed 1350 W from an old transmission while 10 W was going out. Same
+  // reason peak_id is left alone. Both readings are gated on transmit so they
+  // fall back to zero between overs instead of freezing on the last one.
+  const pgxlMeters = () => {
+    if (!pg.connected) return null;
+    const txing = typeof flex?.transmitting === 'boolean' ? flex.transmitting : /TRANSMIT/i.test(pg.state || '');
+    const fwdW = peakHold('pgfwd', txing ? Number(pg.fwd_w) || 0 : 0);
+    const idA = peakHold('pgid', txing ? Number(pg.id) || 0 : 0);
+    const swr = peakHold('pgswr', txing ? Number(pg.vswr) || 0 : 0);
+    const tempC = Number(pg.temperature) || 0;
+    // Two columns, not four. The card sits beside a tall neighbour in Station
+    // Control, so a single row of four leaves the height empty and squeezes each
+    // bar into a quarter width — two rows of two use the room that is already
+    // there and give every bar twice the resolution.
+    return (
+      <div className="grid grid-cols-2 gap-2 mt-2 pt-2 border-t border-border/50">
+        <MeterBar label={t('flxp.outputPower')} value={fwdW} unit="W" lo={0} hi={2000}
+          display={`${Math.round(fwdW)} W`}
+          segColor={(f) => (f > 0.9 ? '#dc2626' : f > 0.75 ? '#f59e0b' : '#ea580c')} />
+        <MeterBar label={t('ampw.id')} value={idA} lo={0} hi={25} display={`${idA.toFixed(1)} A`} accent="#16a34a" />
+        {/* Below 1:1 the reading is meaningless, so an idle amp shows a flat bar
+            rather than a zero that looks like a perfect match. */}
+        <MeterBar label={t('ampw.swr')} value={swr >= 1 ? swr : 1} lo={1} hi={3}
+          display={swr >= 1 ? swr.toFixed(1) : '—'}
+          segColor={(f) => (f > 0.75 ? '#dc2626' : f > 0.4 ? '#f59e0b' : '#16a34a')} />
+        <MeterBar label={t('ampw.temp')} value={tempC} unit="°C" lo={0} hi={100}
+          display={tempC > 0 ? `${Math.round(tempC)} °C` : '—'}
+          segColor={(f) => (f > 0.8 ? '#dc2626' : f > 0.6 ? '#f59e0b' : '#ea580c')} />
+      </div>
+    );
+  };
+
   return (
     <Card icon={Flame} ckey="amplifier" title={`${t('flxp.amplifier')}${flex?.amp_model ? ' · ' + flex.amp_model : (pg.model ? ' · ' + pg.model : '')} · ${amp.name}`} accent="#ea580c">
       <div className="flex items-center gap-3 flex-wrap">
@@ -177,9 +222,6 @@ export function AmpCard({ amp, flex, t }: { amp: Amp; flex: any; t: (k: string,
             operate ? 'bg-warning text-warning-foreground border-warning shadow-[0_0_14px] shadow-warning/50' : 'bg-card text-warning border-warning hover:bg-warning-muted')}>
           {operate ? 'OPERATE' : 'STANDBY'}
         </button>
-        <span className="text-xs text-muted-foreground">
-          {operate ? t('flxp.ampInLine') : t('flxp.ampBypassed')}
-        </span>
         {(pg.host || pg.connected) && (
           <label className="flex items-center gap-1.5 text-xs" title={pg.connected ? t('flxp.pgConnected') : (pg.last_error || t('flxp.pgOffline'))}>
             <span className={cn('size-1.5 rounded-full', pg.connected ? 'bg-success shadow-[0_0_6px_rgba(16,185,129,0.8)]' : 'bg-danger')} />
@@ -201,13 +243,25 @@ export function AmpCard({ amp, flex, t }: { amp: Amp; flex: any; t: (k: string,
           <span className="px-2 py-1 rounded bg-danger-muted text-danger-muted-foreground text-xs font-bold">{t('flxp.fault')}: {fault}</span>
         )}
       </div>
-      {/* Amplifier meters (FWD / ID / TEMP …) from the FlexRadio UDP stream. */}
+      {/* Amplifier meters (FWD / ID / TEMP …).
-      {viaFlex && (() => {
+          The FlexRadio UDP stream is the preferred source — it is fast and reads
+          the same as SmartSDR. When there is no Flex, or it is not streaming,
+          the amplifier's OWN link carries the same figures; falling back to them
+          is what the docked widget already does. Without that fallback this card
+          showed an operator on a Kenwood nothing but OPERATE and the fan mode,
+          while the amplifier was reporting power, current and temperature all
+          along. */}
+      {(() => {
         const meters = (flex?.meters as any[]) || [];
         const dbmToW = (d: number) => Math.pow(10, (d - 30) / 10);
         const amps = meters.filter((m) => (m.src || '').toUpperCase().includes('AMP')
           && !/^(RL|DRV)$/i.test((m.name || '').trim()));
-        if (amps.length === 0) return null;
+        if (!viaFlex || amps.length === 0) return pgxlMeters();
+        // Power comes from the radio's meter stream and nothing else. The
+        // amplifier also reports a "peakfwd", and using it was a mistake twice
+        // over: it is a latched maximum that is never reset, and it survives in
+        // the last-known status after the amp disconnects — so it claimed
+        // 1350 W from an old transmission while the radio was putting out 10.
         return (
           <div className="grid grid-cols-2 sm:grid-cols-3 gap-2 mt-2 pt-2 border-t border-border/50">
             {amps.map((m) => {

frontend/src/components/AmpWidget.tsx

@@ -0,0 +1,288 @@
+import { useRef } from 'react';
+import { Flame, X, Power } from 'lucide-react';
+import { cn } from '@/lib/utils';
+import { useI18n } from '@/lib/i18n';
+import { MeterBar } from '@/components/MeterBar';
+import { AmpOperate, AmpPower, AmpPowerLevel, AmpFanMode, FlexAmpOperate } from '../../wailsjs/go/main/App';
+
+// AmpWidget — the docked amplifier widget, the compact counterpart of AmpCard
+// (which is the full-size card shown in the FlexRadio panel and Station
+// Control). It covers all three families, since an operator running an SPE and
+// a PowerGenius wants one widget, not two:
+//   • SPE Expert  — OPERATE, power ON/OFF, L/M/H, live power / SWR / temp
+//   • ACOM        — OPERATE, power ON/OFF, live power / SWR / temp
+//   • PowerGenius — OPERATE and meters ride on the FlexRadio, fan mode on GSCP
+// With several amplifiers configured the caller passes a selection ("all" or an
+// amp id) chosen from the toolbar icon's dropdown.
+
+type Amp = { id: string; name: string; type?: string; spe?: any; acom?: any; pgxl?: any };
+
+// Full-scale watts for the output bar, from the model string.
+function maxW(model?: string, fallback = 1300): number {
+  const m = (model || '').toUpperCase();
+  if (m.includes('20K') || m.includes('2K')) return 2000;
+  if (m.includes('15K')) return 1500;
+  if (m.includes('13K')) return 1300;
+  return fallback;
+}
+
+function swrColour(swr?: number): string {
+  if (!swr || swr <= 0) return 'text-muted-foreground';
+  if (swr <= 1.5) return 'text-success';
+  if (swr <= 2.0) return 'text-warning';
+  return 'text-danger';
+}
+
+// PowerMeter — the output-power LED bar that closes each column, straight under
+// the controls (no filler above it: pushed to the bottom it left a band of dead
+// space in the middle of the column). Uses the app-wide MeterBar, compact size,
+// so it reads exactly like the meters on the rig panels.
+function PowerMeter({ label, watts, maxWatts }: { label: string; watts: number; maxWatts: number }) {
+  return (
+    <MeterBar compact label={label} value={watts} unit="W" lo={0} hi={maxWatts}
+      display={`${Math.round(watts)} W`}
+      segColor={(f) => (f > 0.9 ? '#dc2626' : f > 0.75 ? '#f59e0b' : '#ea580c')} />
+  );
+}
+
+// usePeakHold keeps the highest reading seen for a short window, so a reading
+// sampled between two syllables doesn't collapse the meter. `live` is the key
+// part: pass false the moment the carrier drops and the held value is thrown
+// away at once — holding it there made releasing the PTT look like a five
+// second lag, which read as the whole app being slow.
+function usePeakHold(windowMs = 1000) {
+  const peak = useRef<Record<string, { v: number; t: number }>>({});
+  return (key: string, val: number, live = true) => {
+    if (!live) { delete peak.current[key]; return val; }
+    const now = Date.now();
+    const p = peak.current[key];
+    if (!p || val >= p.v || now - p.t > windowMs) { peak.current[key] = { v: val, t: now }; return val; }
+    return p.v;
+  };
+}
+
+// Stat — one small labelled figure (power, SWR, temperature).
+function Stat({ label, value, className }: { label: string; value: string; className?: string }) {
+  return (
+    <div className="rounded-lg border border-border bg-card/70 px-1.5 py-1 text-center">
+      <div className="text-[9px] uppercase tracking-wider text-muted-foreground leading-tight">{label}</div>
+      <div className={cn('text-sm font-bold font-mono leading-tight', className ?? 'text-foreground/80')}>{value}</div>
+    </div>
+  );
+}
+
+// OperateButton — the STANDBY/OPERATE toggle, identical in behaviour across the
+// three families (only where the state comes from differs).
+function OperateButton({ operate, disabled, onClick, t }: {
+  operate: boolean; disabled: boolean; onClick: () => void; t: (k: string, v?: any) => string;
+}) {
+  return (
+    <button type="button" disabled={disabled} onClick={onClick}
+      className={cn('w-full inline-flex items-center justify-center gap-1.5 rounded-lg text-xs font-bold py-1.5 border transition-all active:scale-[0.98] disabled:opacity-40',
+        operate
+          ? 'bg-gradient-to-b from-amber-400 to-amber-600 text-white border-amber-300/60 shadow-[0_0_9px_rgba(245,158,11,0.45)]'
+          : 'bg-card text-muted-foreground border-border hover:bg-muted hover:text-foreground')}>
+      <Power className="size-3.5" />
+      {operate ? t('ampw.operate') : t('ampw.standby')}
+    </button>
+  );
+}
+
+// AmpBlock — one amplifier inside the widget.
+function AmpBlock({ amp, flex, showName, t }: {
+  amp: Amp; flex: any; showName: boolean; t: (k: string, v?: any) => string;
+}) {
+  const spe = amp.spe, acom = amp.acom;
+  const hold = usePeakHold();
+
+  if (spe || acom) {
+    const s = spe || acom;
+    // The amp reports zero watts on receive, so its TX flag clears the meter as
+    // soon as the operator lets go — and the radio's own flag, when we have one,
+    // gets there first (the amp is polled on its own slower cycle).
+    const txing = typeof flex?.transmitting === 'boolean' ? flex.transmitting : s.tx !== false;
+    const w = hold('w', Number(spe ? s.output_w : s.fwd_w) || 0, txing);
+    const swr = Number(spe ? s.swr_ant : s.swr) || 0;
+    const hi = spe ? maxW(s.model) : (Number(s.max_w) || 800);
+    // Power ON drives the remote-on control lines, so it stays available while
+    // the amplifier is off and reporting nothing — but only over a serial link.
+    const canPowerOn = spe ? (s.connected || s.transport === 'serial') : (s.port_open && s.transport === 'serial');
+    return (
+      <div className="h-full flex flex-col gap-1.5">
+        {showName && (
+          <div className="flex items-center gap-1.5">
+            <span className={cn('size-1.5 rounded-full shrink-0', s.connected ? 'bg-success shadow-[0_0_6px_rgba(16,185,129,0.8)]' : 'bg-danger')} />
+            <span className="text-[10px] font-bold uppercase tracking-wider truncate">{amp.name || (spe ? 'SPE' : 'ACOM')}</span>
+            {s.connected && s.band && <span className="ml-auto text-[9px] text-muted-foreground shrink-0">{s.band}</span>}
+          </div>
+        )}
+        <OperateButton operate={!!s.operate} disabled={!s.connected} t={t}
+          onClick={() => AmpOperate(amp.id, !s.operate).catch(() => {})} />
+        <div className="flex gap-1.5">
+          <button type="button" disabled={!canPowerOn}
+            onClick={() => AmpPower(amp.id, true).catch(() => {})}
+            className="flex-1 rounded-lg border border-success/60 bg-card py-1 text-[11px] font-bold text-success hover:bg-success/15 disabled:opacity-30">
+            {t('ampw.on')}
+          </button>
+          <button type="button" disabled={!s.connected}
+            onClick={() => AmpPower(amp.id, false).catch(() => {})}
+            className="flex-1 rounded-lg border border-danger/60 bg-card py-1 text-[11px] font-bold text-danger hover:bg-danger/15 disabled:opacity-30">
+            {t('ampw.off')}
+          </button>
+        </div>
+        {/* Output level — SPE only; an ACOM has no L/M/H over CAT. */}
+        {spe && (
+          <div className="grid grid-cols-3 gap-1">
+            {(['L', 'M', 'H'] as const).map((lvl) => {
+              const active = (s.power_level || '').trim().toUpperCase() === lvl;
+              return (
+                <button key={lvl} type="button" disabled={!s.connected}
+                  onClick={() => AmpPowerLevel(amp.id, lvl).catch(() => {})}
+                  className={cn('rounded-md border py-0.5 text-[10px] font-bold transition-colors disabled:opacity-30',
+                    active ? 'bg-primary text-primary-foreground border-primary' : 'bg-card text-muted-foreground border-border hover:bg-muted')}>
+                  {t(`ampw.lvl${lvl}`)}
+                </button>
+              );
+            })}
+          </div>
+        )}
+        {s.connected ? (
+          <div className="grid grid-cols-3 gap-1">
+            <Stat label={t('ampw.pwr')} value={`${Math.round(w)}`} />
+            <Stat label={t('ampw.swr')} value={swr > 0 ? swr.toFixed(1) : '—'} className={swrColour(swr)} />
+            <Stat label={t('ampw.temp')} value={`${Number(s.temp_c) || 0}°`} />
+          </div>
+        ) : (
+          <div className="text-[10px] text-center text-muted-foreground italic py-1">{t('ampw.offline')}</div>
+        )}
+        {(s.warnings || s.alarms || s.err_text) && (
+          <div className="rounded-md border border-danger-border bg-danger-muted text-danger-muted-foreground text-[9px] px-1.5 py-0.5 text-center break-words">
+            {s.err_text || `${s.warnings || ''} ${s.alarms || ''}`.trim()}
+          </div>
+        )}
+        <PowerMeter label={t('flxp.outputPower')} watts={s.connected ? w : 0} maxWatts={hi} />
+      </div>
+    );
+  }
+
+  // PowerGenius XL: OPERATE and the meters come from the radio when the Flex
+  // reports the amp; the fan mode rides on our own GSCP link.
+  const pg = amp.pgxl || {};
+  const viaFlex = !!flex?.amp_available;
+  const operate = viaFlex ? !!flex?.amp_operate : !!pg.operate;
+  const connected = !!pg.connected || viaFlex;
+  const fault = flex?.amp_fault;
+  const meters = ((flex?.meters as any[]) || []).filter((m) => (m.src || '').toUpperCase().includes('AMP'));
+  const meter = (re: RegExp) => meters.find((m) => re.test((m.name || '').trim()));
+  const dbmToW = (d: number) => Math.pow(10, (d - 30) / 10);
+  const fwd = meter(/^fwd|pwr/i);
+  const flexW = fwd ? (/dbm/i.test(fwd.unit || '') ? dbmToW(fwd.value) : fwd.value) : 0;
+  // Whether there is power is the RADIO's transmit flag: it flips the instant
+  // the PTT does, where the amplifier's own status poll answers a second and a
+  // half late and holds TRANSMIT past the carrier.
+  //
+  // How MUCH is the live reading — the radio's meter stream, or the amp's own
+  // forward figure when there is no Flex. NOT the amp's "peakfwd": that is a
+  // latched maximum which is never reset AND survives in the last-known status
+  // after the amp disconnects, so it reported 1350 W from an old transmission
+  // while the radio was putting out 10 W into a disconnected amplifier.
+  const txing = typeof flex?.transmitting === 'boolean'
+    ? flex.transmitting
+    : fwd ? flexW >= 1 : /TRANSMIT/i.test(pg.state || '');
+  // Prefer the radio's VITA meter stream when it is actually flowing (local or
+  // over a VPN) — it is fast and matches SmartSDR. Fall back to the amp's OWN
+  // link only when the radio isn't streaming its meters (a remote link without
+  // the VITA path), so the reading survives but is naturally slower.
+  const liveW = flexW > 0 ? flexW : (pg.connected ? Number(pg.fwd_w) || 0 : 0);
+  const fwdW = hold('fwd', txing ? liveW : 0, txing);
+  const id = meter(/^ID$|current/i);
+  // Live drain current, same source preference. peak_id latches like peak_w, so
+  // use the instantaneous 'id' and gate it on the radio's transmit flag.
+  const idA = id ? Number(id.value) : (txing ? Number(pg.id) || undefined : 0);
+  const temp = meter(/temp/i);
+  // VITA temp matches SmartSDR (the amp's direct link exposes a different sensor
+  // that can read ~10°C higher); fall back to the direct temp when no VITA.
+  const tempC = temp ? temp.value : (pg.temperature > 0 ? pg.temperature : undefined);
+
+  return (
+    <div className="h-full flex flex-col gap-1.5">
+      {showName && (
+        <div className="flex items-center gap-1.5">
+          <span className={cn('size-1.5 rounded-full shrink-0', connected ? 'bg-success shadow-[0_0_6px_rgba(16,185,129,0.8)]' : 'bg-danger')} />
+          <span className="text-[10px] font-bold uppercase tracking-wider truncate">{amp.name || 'PGXL'}</span>
+        </div>
+      )}
+      <OperateButton operate={operate} disabled={!connected} t={t}
+        onClick={() => (viaFlex ? FlexAmpOperate(!operate) : AmpOperate(amp.id, !operate)).catch(() => {})} />
+      {connected ? (
+        <div className="grid grid-cols-3 gap-1">
+          <Stat label={t('ampw.pwr')} value={`${Math.round(fwdW)}`} />
+          <Stat label={t('ampw.id')} value={idA != null ? idA.toFixed(1) : '—'} />
+          <Stat label={t('ampw.temp')} value={tempC != null ? `${Math.round(tempC)}°` : '—'} />
+        </div>
+      ) : (
+        <div className="text-[10px] text-center text-muted-foreground italic py-1">{t('ampw.offline')}</div>
+      )}
+      {(pg.host || pg.connected) && (
+        <select
+          disabled={!pg.connected}
+          value={(pg.fan_mode || 'CONTEST').toUpperCase()}
+          onChange={(e) => AmpFanMode(amp.id, e.target.value).catch(() => {})}
+          title={t('ampw.fan')}
+          className="w-full h-7 rounded-md border border-border bg-card px-1.5 text-[10px] font-semibold outline-none focus:border-warning disabled:opacity-40">
+          <option value="STANDARD">{t('flxp.fanStandard')}</option>
+          <option value="CONTEST">{t('flxp.fanContest')}</option>
+          <option value="BROADCAST">{t('flxp.fanBroadcast')}</option>
+        </select>
+      )}
+      {fault && fault !== 'NONE' && (
+        <div className="rounded-md border border-danger-border bg-danger-muted text-danger-muted-foreground text-[9px] px-1.5 py-0.5 text-center break-words">
+          {t('flxp.fault')}: {fault}
+        </div>
+      )}
+      <PowerMeter label={t('flxp.outputPower')} watts={connected ? fwdW : 0} maxWatts={2000} />
+    </div>
+  );
+}
+
+export function AmpWidget({ amps, flex, sel, onClose }: {
+  amps: Amp[];
+  flex: any;
+  sel: string; // "all" or an amp id
+  onClose: () => void;
+}) {
+  const { t } = useI18n();
+  // An id that no longer matches (the amp was removed in Settings) falls back to
+  // showing everything rather than an empty widget.
+  const shown = sel === 'all' ? amps : (amps.filter((a) => a.id === sel).length ? amps.filter((a) => a.id === sel) : amps);
+  const anyOnline = shown.some((a) => a.spe?.connected || a.acom?.connected || a.pgxl?.connected || flex?.amp_available);
+  const title = shown.length === 1 ? (shown[0].name || t('ampw.title')) : t('ampw.title');
+
+  return (
+    <div className="h-full flex flex-col rounded-xl border border-border bg-gradient-to-b from-card to-muted/30 shadow-sm overflow-hidden">
+      <div className="flex items-center gap-2 px-3 py-2 border-b border-border/60 bg-muted/40 shrink-0">
+        <Flame className={cn('size-4', anyOnline ? 'text-warning drop-shadow-[0_0_3px_rgba(245,158,11,0.55)]' : 'text-muted-foreground')} />
+        <span className="text-xs font-bold uppercase tracking-[0.18em] text-foreground/80 truncate">{title}</span>
+        <span className="flex-1" />
+        <button type="button" onClick={onClose} className="ml-1 text-muted-foreground hover:text-foreground transition-colors" title={t('ampw.close')}>
+          <X className="size-3.5" />
+        </button>
+      </div>
+      {/* Several amplifiers sit SIDE BY SIDE, one column each: stacked, two amps
+          made a widget taller than the dock row and both ended up half hidden. */}
+      <div className="flex-1 min-h-0 overflow-y-auto p-2.5">
+        {shown.length === 0 ? (
+          <div className="text-[11px] text-center text-muted-foreground italic py-2">{t('ampw.none')}</div>
+        ) : (
+          <div className="grid gap-2.5 h-full" style={{ gridTemplateColumns: `repeat(${shown.length}, minmax(0, 1fr))` }}>
+            {shown.map((a, i) => (
+              <div key={a.id} className={cn(i > 0 && 'pl-2.5 border-l border-border/50')}>
+                <AmpBlock amp={a} flex={flex} showName={shown.length > 1} t={t} />
+              </div>
+            ))}
+          </div>
+        )}
+      </div>
+    </div>
+  );
+}

frontend/src/components/AppearancePanel.tsx

@@ -0,0 +1,289 @@
+import { useEffect, useState } from 'react';
+import { GetMatrixColors, GetRowColors, SaveMatrixColors, SaveRowColors } from '../../wailsjs/go/main/App';
+import { Checkbox } from '@/components/ui/checkbox';
+import { useI18n } from '@/lib/i18n';
+import { cn } from '@/lib/utils';
+import type { RowColorSettings } from '@/lib/rowColors';
+import {
+  MATRIX_VARS, applyMatrixColors, effectiveMatrixColor, emptyMatrixColors,
+  type MatrixColors,
+} from '@/lib/matrixColors';
+
+// A fixed palette plus a free picker. Muted values on purpose: they are
+// composited at low opacity over a dark grid, where a saturated colour reads as
+// an error state rather than a status.
+const PALETTE = [
+  '#16a34a', '#0ea5e9', '#f59e0b', '#a855f7',
+  '#dc2626', '#14b8a6', '#eab308', '#ec4899',
+  '#64748b', '#84cc16', '#6366f1', '#f97316',
+];
+
+// The rule ids the backend orders; the labels live here so a translation never
+// travels through the settings row.
+const LABELS: Record<string, string> = {
+  to_send: 'appr.ruleToSend',
+  confirmed: 'appr.ruleConfirmed',
+  sent: 'appr.ruleSent',
+  worked: 'appr.ruleWorked',
+};
+
+// The channels a rule can be scoped to. "worked" is the catch-all — it means
+// nothing on ANY channel — so narrowing it would say nothing.
+const CHANNELS = ['qsl', 'lotw', 'eqsl', 'qrz'] as const;
+const CHANNEL_LABELS: Record<string, string> = {
+  qsl: 'appr.chQsl', lotw: 'LoTW', eqsl: 'eQSL', qrz: 'QRZ.com',
+};
+
+// MatrixColorsSection recolours the band/mode matrix — the PH/CW/DIG grid in the
+// Stats panel.
+//
+// The pickers are seeded from what the matrix is painting RIGHT NOW (the active
+// theme's ramp, or an existing override), not from a fixed palette: the operator
+// starts from the colours in front of them and moves one, instead of being
+// handed six values that may belong to a theme they stopped using. Every change
+// is applied to the live document at once, so the sample row below is the real
+// thing rather than a mock-up of it.
+function MatrixColorsSection() {
+  const { t } = useI18n();
+  const [cfg, setCfg] = useState<MatrixColors | null>(null);
+
+  useEffect(() => {
+    (async () => {
+      try {
+        setCfg((await GetMatrixColors()) as any);
+      } catch {
+        setCfg(emptyMatrixColors());
+      }
+    })();
+  }, []);
+
+  const save = (next: MatrixColors) => {
+    setCfg(next);
+    applyMatrixColors(next); // live, before the round trip — the panel must not lag the choice
+    SaveMatrixColors(next as any).catch(() => {});
+  };
+
+  // Turning it ON with nothing stored would change nothing at all and read as a
+  // broken switch, so the empty slots are filled from the theme's current ramp:
+  // the operator sees six swatches that match the grid and edits from there.
+  const enable = (on: boolean) => {
+    if (!cfg) return;
+    if (!on) {
+      save({ ...cfg, enabled: false });
+      return;
+    }
+    const seeded = { ...cfg, enabled: true };
+    for (const { key, cssVar } of MATRIX_VARS) {
+      if (!String(seeded[key] ?? '').trim()) seeded[key] = effectiveMatrixColor(cssVar);
+    }
+    save(seeded);
+  };
+
+  // Reset clears the overrides but keeps the section switched on, then re-seeds
+  // from the theme — "back to the theme's colours", which is what an operator
+  // means by reset here, rather than "switch the whole feature off".
+  const reset = () => {
+    if (!cfg) return;
+    applyMatrixColors({ ...emptyMatrixColors(), enabled: false });
+    const seeded = { ...emptyMatrixColors(), enabled: true };
+    for (const { key, cssVar } of MATRIX_VARS) seeded[key] = effectiveMatrixColor(cssVar);
+    save(seeded);
+  };
+
+  if (!cfg) return null;
+
+  return (
+    <div className="space-y-3 border-t border-border/60 pt-4">
+      <label className="flex items-start gap-2 text-sm cursor-pointer">
+        <Checkbox checked={cfg.enabled} className="mt-0.5" onCheckedChange={(c) => enable(!!c)} />
+        <span>
+          {t('appr.matrixEnable')}{' '}
+          <span className="text-xs text-muted-foreground">{t('appr.matrixHint')}</span>
+        </span>
+      </label>
+
+      {cfg.enabled && (
+        <div className="space-y-3">
+          <div className="grid grid-cols-2 gap-x-4 gap-y-2">
+            {MATRIX_VARS.map(({ key, cssVar, label }) => (
+              <label key={key} className="flex items-center gap-2 text-sm cursor-pointer">
+                <input
+                  type="color"
+                  value={String(cfg[key] || '').trim() || effectiveMatrixColor(cssVar)}
+                  onChange={(e) => save({ ...cfg, [key]: e.target.value })}
+                  className="size-6 rounded-md border border-border bg-transparent p-0 cursor-pointer shrink-0"
+                />
+                {t(label)}
+              </label>
+            ))}
+          </div>
+
+          {/* The matrix as it will actually look: same tokens, same shapes. */}
+          <div className="flex items-center gap-1.5">
+            <span className="text-xs text-muted-foreground w-10 shrink-0">{t('appr.matrixSample')}</span>
+            <span className="inline-block w-7 h-5 rounded bg-mx-call-conf" />
+            <span className="inline-block w-7 h-5 rounded bg-mx-call-work" />
+            <span className="inline-block w-7 h-5 rounded bg-mx-dx-conf" />
+            <span className="inline-block w-7 h-5 rounded bg-mx-dx-work" />
+            <span className="inline-block w-7 h-5 rounded bg-mx-none" />
+            <span className="inline-block w-7 h-5 rounded bg-mx-none ring-2 ring-mx-cur ring-inset" />
+          </div>
+
+          <button type="button" onClick={reset}
+            className="text-xs text-muted-foreground underline underline-offset-2 hover:text-foreground">
+            {t('appr.matrixReset')}
+          </button>
+        </div>
+      )}
+    </div>
+  );
+}
+
+export function AppearancePanel() {
+  const { t } = useI18n();
+  const [cfg, setCfg] = useState<RowColorSettings | null>(null);
+
+  useEffect(() => {
+    (async () => {
+      try { setCfg((await GetRowColors()) as any); } catch { /* defaults on the backend */ }
+    })();
+  }, []);
+
+  const save = (next: RowColorSettings) => {
+    setCfg(next);
+    SaveRowColors(next as any).catch(() => {});
+  };
+  const patchRule = (id: string, patch: Partial<{ color: string; enabled: boolean; channels: string[] }>) => {
+    if (!cfg) return;
+    save({ ...cfg, rules: cfg.rules.map((r) => (r.id === id ? { ...r, ...patch } : r)) });
+  };
+
+  // The rule card shows the row exactly as the grid will draw it, so the choice
+  // is made by looking rather than by imagining.
+  const preview = (color: string): Record<string, string> => {
+    const st = cfg?.style ?? 'bar';
+    const pct = cfg?.intensity ?? 12;
+    const out: Record<string, string> = {};
+    if (st === 'tint' || st === 'both') out.backgroundColor = `color-mix(in srgb, ${color} ${pct}%, transparent)`;
+    if (st === 'bar' || st === 'both') out.boxShadow = `inset 3px 0 0 ${color}`;
+    return out;
+  };
+
+  if (!cfg) return <div className="p-1 text-sm text-muted-foreground">…</div>;
+
+  return (
+    <div className="space-y-4">
+      <label className="flex items-start gap-2 text-sm cursor-pointer">
+        <Checkbox checked={!!cfg.bandmap_lotw} className="mt-0.5"
+          onCheckedChange={(c) => save({ ...cfg, bandmap_lotw: !!c } as any)} />
+        <span>{t('appr.bandmapLotw')} <span className="text-xs text-muted-foreground">{t('appr.bandmapLotwHint')}</span></span>
+      </label>
+
+      {/* Banding is its own thing, above the QSL rules and outside them: it says
+          nothing about a contact, it only helps the eye keep its line across a
+          wide table. Turning the status colours off must not take it away. */}
+      <div className="space-y-2">
+        <label className="flex items-start gap-2 text-sm cursor-pointer">
+          <Checkbox checked={(cfg as any).recent_zebra !== 'off'} className="mt-0.5"
+            onCheckedChange={(c) => save({ ...cfg, recent_zebra: c ? '' : 'off' } as any)} />
+          <span>{t('appr.zebra')} <span className="text-xs text-muted-foreground">{t('appr.zebraHint')}</span></span>
+        </label>
+        {(cfg as any).recent_zebra !== 'off' && (
+          <div className="flex items-center gap-2 pl-6">
+            <span className="text-xs text-muted-foreground">{t('appr.zebraColor')}</span>
+            <input type="color" className="size-7 rounded border border-border bg-transparent p-0 cursor-pointer"
+              value={/^#[0-9a-fA-F]{6}$/.test((cfg as any).recent_zebra_color ?? '') ? (cfg as any).recent_zebra_color : '#808080'}
+              onChange={(e) => save({ ...cfg, recent_zebra_color: e.target.value } as any)} />
+            {/* Empty means "follow the theme", and there has to be a way back to
+                it — a colour chosen under one theme is wrong under the other. */}
+            {(cfg as any).recent_zebra_color && (
+              <button type="button" className="text-xs text-muted-foreground hover:text-foreground"
+                onClick={() => save({ ...cfg, recent_zebra_color: '' } as any)}>{t('appr.zebraAuto')}</button>
+            )}
+          </div>
+        )}
+      </div>
+
+      <label className="flex items-start gap-2 text-sm cursor-pointer">
+        <Checkbox checked={cfg.enabled} className="mt-0.5"
+          onCheckedChange={(c) => save({ ...cfg, enabled: !!c })} />
+        <span>{t('appr.enable')} <span className="text-xs text-muted-foreground">{t('appr.enableHint')}</span></span>
+      </label>
+
+      {cfg.enabled && (
+        <div className="space-y-3">
+          {/* Style first: it decides whether the colours below are a signal or a
+              wallpaper, which matters more than which hue they are. */}
+          <div className="flex items-center gap-3 flex-wrap">
+            <span className="text-sm">{t('appr.style')}</span>
+            <div className="inline-flex rounded-md border border-border overflow-hidden text-xs">
+              {(['bar', 'tint', 'both'] as const).map((v) => (
+                <button key={v} type="button" onClick={() => save({ ...cfg, style: v })}
+                  className={cn('px-3 py-1.5 font-medium', (cfg.style ?? 'bar') === v ? 'bg-primary text-primary-foreground' : 'text-muted-foreground hover:bg-muted')}>
+                  {t('appr.style' + v[0].toUpperCase() + v.slice(1))}
+                </button>
+              ))}
+            </div>
+            {(cfg.style ?? 'bar') !== 'bar' && (
+              <label className="flex items-center gap-2 text-sm">
+                {t('appr.intensity')}
+                <input type="range" min={5} max={45} step={1} value={cfg.intensity ?? 12}
+                  onChange={(e) => save({ ...cfg, intensity: parseInt(e.target.value, 10) })}
+                  className="w-32 accent-[var(--primary)]" />
+                <span className="font-mono text-xs text-muted-foreground w-8">{cfg.intensity ?? 12}%</span>
+              </label>
+            )}
+          </div>
+          {/* Order matters and is shown: a contact is usually several of these at
+              once, and the first match wins. */}
+          <p className="text-xs text-muted-foreground">{t('appr.orderHint')}</p>
+          {cfg.rules.map((r, i) => (
+            <div key={r.id} className="rounded-lg border border-border/60 p-2.5 space-y-2"
+              style={r.enabled ? preview(r.color) : undefined}>
+              <label className="flex items-center gap-2 text-sm cursor-pointer">
+                <Checkbox checked={r.enabled} onCheckedChange={(c) => patchRule(r.id, { enabled: !!c })} />
+                <span className="font-mono text-xs text-muted-foreground">{i + 1}.</span>
+                <span className="font-medium">{t(LABELS[r.id] ?? r.id)}</span>
+              </label>
+              {/* Which channels this category looks at. None ticked = all of
+                  them, which is what an unnarrowed rule should mean. */}
+              {r.enabled && r.id !== 'worked' && (
+                <div className="flex items-center gap-3 flex-wrap pl-6 text-xs">
+                  {CHANNELS.map((c) => {
+                    const on = !r.channels?.length || r.channels.includes(c);
+                    return (
+                      <label key={c} className="flex items-center gap-1.5 cursor-pointer">
+                        <Checkbox checked={on} onCheckedChange={(v) => {
+                          const cur = r.channels?.length ? r.channels : [...CHANNELS];
+                          const next = v ? [...new Set([...cur, c])] : cur.filter((x) => x !== c);
+                          patchRule(r.id, { channels: next });
+                        }} />
+                        {CHANNEL_LABELS[c]?.startsWith('appr.') ? t(CHANNEL_LABELS[c]) : CHANNEL_LABELS[c]}
+                      </label>
+                    );
+                  })}
+                </div>
+              )}
+              {r.enabled && (
+                <div className="flex items-center gap-1.5 flex-wrap pl-6">
+                  {PALETTE.map((c) => (
+                    <button key={c} type="button" title={c}
+                      onClick={() => patchRule(r.id, { color: c })}
+                      className={cn('size-6 rounded-md border-2 transition-transform hover:scale-110',
+                        r.color.toLowerCase() === c ? 'border-foreground' : 'border-transparent')}
+                      style={{ backgroundColor: c }} />
+                  ))}
+                  <input type="color" value={r.color} title={t('appr.custom')}
+                    onChange={(e) => patchRule(r.id, { color: e.target.value })}
+                    className="size-6 rounded-md border border-border bg-transparent p-0 cursor-pointer" />
+                </div>
+              )}
+            </div>
+          ))}
+        </div>
+      )}
+
+      <MatrixColorsSection />
+    </div>
+  );
+}

frontend/src/components/AwardEditor.tsx

@@ -1,5 +1,5 @@
 import { useCallback, useEffect, useMemo, useState } from 'react';
-import { Plus, Trash2, RotateCcw, Save, Download, Upload, Loader2, Search, FolderOpen, ArrowUpCircle } from 'lucide-react';
+import { Plus, Trash2, RotateCcw, Save, Download, Upload, Loader2, Search, FolderOpen, ArrowUpCircle, Share2 } from 'lucide-react';
 import { Dialog, DialogContent, DialogHeader, DialogTitle, DialogFooter } from '@/components/ui/dialog';
 import { Button } from '@/components/ui/button';
 import { Input } from '@/components/ui/input';
@@ -14,12 +14,12 @@ import { useI18n } from '@/lib/i18n';
 import {
   GetAwardDefs, SaveAwardDefs, ResetAwardDefs, AwardFields,
   GetAwardReferenceMeta, UpdateAwardReferenceList,
-  ListAwardReferences, SearchAwardReferences, SaveAwardReference, DeleteAwardReference,
+  ListAwardReferences, SearchAwardReferences, SaveAwardReference, DeleteAwardReference, RenameAwardReference,
   ImportAwardReferencesText, GetAwardPresets, ApplyAwardPreset,
   ListCountries, DXCCForCountry, DXCCName,
   PopulateBuiltinReferences, HasBuiltinReferences,
   ExportAwards, ImportAwards, InspectAwardImport, ApplyAwardImport, GetCatalogCodes, OpenAwardsFolder,
-  ExportAwardForCatalog,
+  ExportAwardForCatalog, ExportAward,
   GetAwardUpdates, ApplyAwardUpdate, DismissAwardUpdate, ExplainAward,
 } from '../../wailsjs/go/main/App';
 
@@ -33,11 +33,14 @@ export type AwardDef = {
   code: string; name: string; description?: string; valid?: boolean; protected?: boolean;
   url?: string; download_url?: string; ref_url?: string; valid_from?: string; valid_to?: string; alias?: string;
   ref_display?: string; // grid column shows: ref | name | both
-  type?: string; field: string; match_by?: string; exact_match?: boolean; pattern: string;
+  type?: string; field: string; match_by?: string; exact_match?: boolean; one_ref_per_qso?: boolean; pattern: string;
-  leading_str?: string; trailing_str?: string; dynamic?: boolean;
+  leading_str?: string; trailing_str?: string; prefix?: string; dynamic?: boolean;
   or_rules?: AwardOrRule[];
   dxcc_filter: number[] | null; valid_bands?: string[]; valid_modes?: string[]; emission?: string[];
   confirm: string[] | null; validate?: string[] | null; grant_codes?: string; export_credit_granted?: boolean;
+  // The "custom" confirmation source: the field it reads and, optionally, the
+  // value(s) that count. Empty value = any non-empty value confirms.
+  confirm_field?: string; confirm_value?: string;
   total: number; builtin?: boolean; version?: number;
 };
 
@@ -59,6 +62,10 @@ type Preset = { key: string; name: string; field: string; dxcc: number; refs: Aw
 // organizational only; matching is driven by the field/pattern/dynamic options,
 // so there's no need for separate GRID/DXCC types (use QSOFIELDS + the field).
 const AWARD_TYPES = ['REFERENCE', 'QSOFIELDS', 'CALLSIGN'];
+// Sentinel for "no QSO field at all". The definition stores an empty field, and
+// the matcher already treats that as "nothing to scan" — this only gives the
+// operator a way to ASK for it.
+const NO_FIELD = '__none__';
 const CONFIRM_SRC = [
   { id: 'lotw', label: 'LoTW' }, { id: 'qsl', label: 'QSL' }, { id: 'eqsl', label: 'eQSL' },
   { id: 'qrzcom', label: 'QRZ.com' }, { id: 'custom', label: 'Custom' },
@@ -94,6 +101,13 @@ function Chips({ all, value, onToggle }: { all: string[]; value: string[]; onTog
   );
 }
 
+// Awards use a far-future date as "no end" (RDA carries 9999-12-31). Printing it
+// back at the operator reads like a real deadline, so show it as open-ended.
+function openEnded(d?: string): string {
+  if (!d) return '—';
+  return /^9\d{3}-/.test(d) ? '—' : d;
+}
+
 function Field2({ label, children }: { label: string; children: React.ReactNode }) {
   return (
     <div className="grid grid-cols-[120px_1fr] items-center gap-2">
@@ -227,7 +241,7 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {
   };
   type Explanation = {
     code: string; in_scope: boolean; scope_error?: string; predefined: boolean;
-    ref_count: number; steps: Step[]; manual?: string[]; result: string[];
+    ref_count: number; steps: Step[]; manual?: string[]; ambiguous?: string[]; result: string[];
   };
   type TestRow = { qso: any; explanation: Explanation };
   const [testCall, setTestCall] = useState('');
@@ -267,6 +281,7 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {
     }
     return groups;
   }, [testRows]);
+  const noField = !String(cur?.field ?? '').trim();
   const patch = (p: Partial<AwardDef>) => setDefs((ds) => ds.map((d, j) => (j === sel ? { ...d, ...p } : d)));
   const toggleIn = (key: keyof AwardDef, v: string) => {
     const arr = ((cur?.[key] as string[]) ?? []);
@@ -304,6 +319,23 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {
       if (p) setErr(t('awed.exportedTo', { path: p }));
     } catch (e: any) { setErr(String(e?.message ?? e)); }
   }
+  // Export the SELECTED award on its own — the unit you actually share. The
+  // bundle above is a backup: sending it to someone hands over your whole
+  // catalogue when they asked for one award.
+  //
+  // Distinct from the catalog publish below, which is for shipping an award INTO
+  // OpsLog: that one stamps a version and clears user_edited. This one is a plain
+  // share and leaves both alone, so the recipient's copy is correctly marked as
+  // someone else's work rather than as a pristine built-in.
+  async function exportOne() {
+    setErr('');
+    if (!cur) return;
+    try {
+      const code = cur.code.trim().toUpperCase();
+      const p = await ExportAward(code);
+      if (p) setErr(t('awed.exportedOneTo', { code, path: p }));
+    } catch (e: any) { setErr(String(e?.message ?? e)); }
+  }
   // Export the SELECTED award as a catalog-ready JSON, stamped with a version, to
   // paste over internal/award/catalog/<code>.json. A new release then ships it to
   // the whole team (unedited copies auto-upgrade; edited ones are offered it).
@@ -539,11 +571,30 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {
                     <div className="border-t pt-2.5 mt-1 space-y-2.5">
                       <p className="text-[11px] text-muted-foreground">{t('awed.qsoParams')}</p>
                       <Field2 label={t('awed.searchInField')}>
-                        <Select value={cur.field} onValueChange={(v) => patch({ field: v })}>
+                        {/* NO_FIELD is a sentinel because the stored value is the
+                            empty string and a Select cannot carry one — an empty
+                            item value means "show the placeholder" to Radix. */}
+                        {/* Picking "no field" clears the fallbacks too: it promises that
+                            nothing is matched automatically, and an OR rule left behind goes
+                            on scanning its own field — worse than a visible one, because the
+                            panel stops showing it. */}
+                        <Select value={cur.field || NO_FIELD}
+                          onValueChange={(v) => patch(v === NO_FIELD ? { field: '', or_rules: [] } : { field: v })}>
                           <SelectTrigger className="h-8 text-xs w-56"><SelectValue /></SelectTrigger>
-                          <SelectContent className="max-h-72">{fields.map((f) => <SelectItem key={f} value={f}>{f}</SelectItem>)}</SelectContent>
+                          <SelectContent className="max-h-72">
+                            <SelectItem value={NO_FIELD}>{t('awed.fieldNone')}</SelectItem>
+                            {fields.map((f) => <SelectItem key={f} value={f}>{f}</SelectItem>)}
+                          </SelectContent>
                         </Select>
                       </Field2>
+                      {/* An award whose references live in no ADIF field at all —
+                          WWBOTA has no column anywhere — has nothing to match on,
+                          and every control below would be a question with no
+                          answer. Hiding them is the point: the references are the
+                          ones the operator assigns to a QSO by hand. */}
+                      {noField ? (
+                        <p className="text-[11px] text-muted-foreground pl-[128px]">{t('awed.fieldNoneHint')}</p>
+                      ) : (<>
                       <Field2 label={t('awed.matchBy')}>
                         <div className="flex items-center gap-3 text-xs">
                           {['code', 'description', 'pattern'].map((m) => (
@@ -554,16 +605,25 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {
                         </div>
                       </Field2>
                       <label className="flex items-center gap-2 text-xs cursor-pointer pl-[128px]"><Checkbox checked={!!cur.exact_match} onCheckedChange={(c) => patch({ exact_match: !!c })} /> {t('awed.exactMatch')}</label>
+                      <label className="flex items-center gap-2 text-xs cursor-pointer pl-[128px]" title={t('awed.oneRefHint')}><Checkbox checked={!!cur.one_ref_per_qso} onCheckedChange={(c) => patch({ one_ref_per_qso: !!c })} /> {t('awed.oneRef')}</label>
                       <Field2 label={t('awed.patternRegex')}><Input className="h-8 font-mono text-xs" value={cur.pattern} onChange={(e) => patch({ pattern: e.target.value })} placeholder={t('awed.patternPlaceholder')} /></Field2>
-                      <div className="grid grid-cols-2 gap-3">
+                      <div className="grid grid-cols-3 gap-3">
                         <Field2 label={t('awed.leadingString')}><Input className="h-8 font-mono text-xs" value={cur.leading_str ?? ''} onChange={(e) => patch({ leading_str: e.target.value })} /></Field2>
                         <Field2 label={t('awed.trailingString')}><Input className="h-8 font-mono text-xs" value={cur.trailing_str ?? ''} onChange={(e) => patch({ trailing_str: e.target.value })} /></Field2>
+                        <Field2 label={t('awed.prefix')}><Input className="h-8 font-mono text-xs" value={cur.prefix ?? ''} onChange={(e) => patch({ prefix: e.target.value })} placeholder={t('awed.prefixPlaceholder')} title={t('awed.prefixTitle')} /></Field2>
                       </div>
 
+                      </>)}
                       {/* Fallback searches: tried in order, only while nothing
                           has matched yet — the first that hits wins (short-circuit),
                           so a value already resolved by the primary rule isn't
-                          re-derived differently by a later one. */}
+                          re-derived differently by a later one.
+                          
+                          Shown even with no field when rules survive from an
+                          imported definition: a rule that still runs must still
+                          be visible, or the award finds references the panel
+                          says it cannot. */}
+                      {(!noField || (cur.or_rules?.length ?? 0) > 0) && (
                       <div className="border-t pt-2.5 space-y-2">
                         <div className="flex items-center justify-between">
                           <p className="text-[11px] text-muted-foreground">{t('awed.additionalSearches')} <span className="font-semibold">(OR)</span> {t('awed.orAlsoMatch')}</p>
@@ -601,6 +661,7 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {
                           );
                         })}
                       </div>
+                      )}
                     </div>
                   </TabsContent>
 
@@ -620,6 +681,30 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {
                         ))}
                       </div>
                     </div>
+
+                    {/* "Custom" is only meaningful once it names a field, so the
+                        inputs appear as soon as it is ticked in either column —
+                        and a custom source with no field confirms nothing. */}
+                    {((cur.confirm ?? []).includes('custom') || (cur.validate ?? []).includes('custom')) && (
+                      <div className="space-y-2 border-t border-border/60 pt-3">
+                        <Label className="text-xs font-semibold">{t('awed.customLabel')}</Label>
+                        <div className="grid grid-cols-2 gap-3">
+                          <div className="space-y-1">
+                            <Label className="text-[11px] text-muted-foreground">{t('awed.customField')}</Label>
+                            <Input className="h-8 font-mono text-xs" placeholder="APP_OPSLOG_QSL_RCVD"
+                              value={(cur as any).confirm_field ?? ''}
+                              onChange={(e) => patch({ confirm_field: e.target.value.trim().toUpperCase() } as any)} />
+                          </div>
+                          <div className="space-y-1">
+                            <Label className="text-[11px] text-muted-foreground">{t('awed.customValue')}</Label>
+                            <Input className="h-8 font-mono text-xs" placeholder="Y,V"
+                              value={(cur as any).confirm_value ?? ''}
+                              onChange={(e) => patch({ confirm_value: e.target.value } as any)} />
+                          </div>
+                        </div>
+                        <p className="text-[11px] text-muted-foreground leading-relaxed">{t('awed.customHint')}</p>
+                      </div>
+                    )}
                     {/* "Grant codes" and "export credit_granted" used to live here. No
                         ADIF export has ever written CREDIT_GRANTED, so both controls
                         did nothing at all. The stored values are kept (see award.Def);
@@ -708,6 +793,13 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {
                                   )}
                                 </div>
                               ))}
+                              {(ex.ambiguous ?? []).length > 0 && (
+                                <div className="px-3 py-2 text-xs">
+                                  <span className="font-semibold uppercase text-[10px] tracking-wide text-warning">{t('awed.testAmbiguous')}</span>{' '}
+                                  <span className="font-mono text-warning">{(ex.ambiguous ?? []).join(', ')}</span>{' '}
+                                  <span className="text-muted-foreground">{t('awed.testAmbiguousHint')}</span>
+                                </div>
+                              )}
                               {(ex.manual ?? []).length > 0 && (
                                 <div className="px-3 py-2 text-xs">
                                   <span className="font-semibold uppercase text-[10px] tracking-wide">{t('awed.testManual')}</span>{' '}
@@ -725,6 +817,7 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {
                   <TabsContent value="refs" className="mt-0">
                     <ReferencesPanel
                       code={cur.code.trim().toUpperCase()} presets={presets} meta={meta[cur.code.toUpperCase()]}
+                      awardValidFrom={cur.valid_from} awardValidTo={cur.valid_to}
                       onUpdateOnline={() => updateList(cur.code.toUpperCase())} updating={updating === cur.code.toUpperCase()}
                       onChanged={loadMeta} setErr={setErr}
                     />
@@ -744,6 +837,14 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {
           <Button variant="outline" onClick={exportAwards} title={t('awed.exportTitle')}>
             <Download className="size-3.5 mr-1" /> {t('awed.export')}
           </Button>
+          {/* Share just the selected one. Sitting next to the whole-catalogue
+              export because that is where an operator looks for it, and labelled
+              with the code so the two are never confused at a glance. */}
+          {cur && (
+            <Button variant="outline" onClick={exportOne} title={t('awed.exportOneTitle')}>
+              <Share2 className="size-3.5 mr-1" /> {t('awed.exportOne', { code: cur.code.trim().toUpperCase() })}
+            </Button>
+          )}
           <Button variant="outline" onClick={importAwards} title={t('awed.importTitle')}>
             <Upload className="size-3.5 mr-1" /> {t('awed.import')}
           </Button>
@@ -838,14 +939,18 @@ export function AwardEditor({ open, onClose, onSaved }: Props) {
 // ReferencesPanel — manage the reference list of one award: search/list on the
 // left, a per-reference editor on the right, plus bulk paste/CSV, presets and
 // the online updater (POTA/SOTA/WWFF).
-function ReferencesPanel({ code, presets, meta, onUpdateOnline, updating, onChanged, setErr }: {
+function ReferencesPanel({ code, presets, meta, awardValidFrom, awardValidTo, onUpdateOnline, updating, onChanged, setErr }: {
-  code: string; presets: Preset[]; meta?: RefMeta;
+  code: string; presets: Preset[]; meta?: RefMeta; awardValidFrom?: string; awardValidTo?: string;
   onUpdateOnline: () => void; updating: boolean; onChanged: () => void; setErr: (s: string) => void;
 }) {
   const { t } = useI18n();
   const [refs, setRefs] = useState<AwardRef[]>([]);
   const [q, setQ] = useState('');
   const [selCode, setSelCode] = useState<string | null>(null);
+  // The code as TYPED. The list and every patch key off selCode, so editing the
+  // code in place would make the editor lose the reference mid-edit; the draft
+  // is applied as a rename when the operator saves.
+  const [codeDraft, setCodeDraft] = useState('');
   const [busy, setBusy] = useState(false);
   const [bulk, setBulk] = useState('');
   const [showBulk, setShowBulk] = useState(false);
@@ -883,6 +988,7 @@ function ReferencesPanel({ code, presets, meta, onUpdateOnline, updating, onChan
   }
 
   const sel = refs.find((r) => r.code === selCode) || null;
+  useEffect(() => { setCodeDraft(selCode ?? ''); }, [selCode]);
   // Large lists are already filtered by the server; small lists filter locally.
   const filtered = useMemo(() => {
     if (large) return refs;
@@ -896,6 +1002,27 @@ function ReferencesPanel({ code, presets, meta, onUpdateOnline, updating, onChan
     try { await SaveAwardReference(code, r as any); load(); onChanged(); }
     catch (e: any) { setErr(String(e?.message ?? e)); }
   }
+  // Save the selected reference, renumbering it first when the code was edited.
+  //
+  // The rename has to come first and has to be a rename: saving under the new
+  // code would simply create a second reference and leave the old one behind,
+  // which is how a list quietly grows duplicates.
+  async function saveSelected(r: AwardRef) {
+    const next = codeDraft.trim().toUpperCase();
+    if (!next) { setErr(t('awed.refCodeEmpty')); return; }
+    if (next !== r.code) {
+      try {
+        await RenameAwardReference(code, r.code, next);
+      } catch (e: any) {
+        // Most often the number is already taken by another reference. Said
+        // here rather than swallowed: the save has NOT happened.
+        setErr(String(e?.message ?? e));
+        return;
+      }
+      setSelCode(next);
+    }
+    await saveRef({ ...r, code: next });
+  }
   async function addRef() {
     const c = prompt(t('awed.newRefCodePrompt'))?.trim().toUpperCase();
     if (!c) return;
@@ -977,7 +1104,13 @@ function ReferencesPanel({ code, presets, meta, onUpdateOnline, updating, onChan
           ) : (
             <div className="space-y-2">
               <div className="flex items-center gap-2">
-                <Input className="h-8 w-28 font-mono font-semibold" value={sel.code} readOnly />
+                {/* Editable, because a shipped list can be wrong about it: WAJA
+                    went out carrying Japan's civil prefecture numbers instead of
+                    the JARL's, and correcting that meant deleting all 47
+                    references and importing a new list. */}
+                <Input className="h-8 w-28 font-mono font-semibold" value={codeDraft}
+                  title={t('awed.refCodeTip')}
+                  onChange={(e) => setCodeDraft(e.target.value)} />
                 <label className="flex items-center gap-1.5 text-xs cursor-pointer"><Checkbox checked={sel.valid} onCheckedChange={(c) => patchSel({ valid: !!c })} /> {t('awed.valid')}</label>
                 <div className="flex-1" />
                 <button className="text-muted-foreground hover:text-destructive" onClick={() => delRef(sel.code)}><Trash2 className="size-4" /></button>
@@ -995,7 +1128,27 @@ function ReferencesPanel({ code, presets, meta, onUpdateOnline, updating, onChan
                   third-party list may carry the values — but they are not offered
                   for editing until something actually reads them. */}
               <Field2 label={t('awed.grid')}><Input className="h-8 font-mono" value={sel.gridsquare ?? ''} onChange={(e) => patchSel({ gridsquare: e.target.value })} /></Field2>
-              <div className="flex justify-end pt-1"><Button size="sm" className="h-7" onClick={() => sel && saveRef(sel)}><Save className="size-3.5 mr-1" /> {t('awed.saveReference')}</Button></div>
+              {/* This reference's own validity window. A reference is not forever:
+                  a park is delisted, a district merged. A QSO made while it
+                  existed still counts — it was a valid contact on the day — and
+                  one made afterwards does not.
+                  Left empty the award's own dates govern, which is why they show
+                  as the placeholder: the operator can see what "empty" inherits
+                  instead of having to remember. */}
+              <Field2 label={t('awed.refValidFrom')}>
+                <Input type="date" className="h-8 w-44" value={sel.valid_from ?? ''}
+                  onChange={(e) => patchSel({ valid_from: e.target.value })} />
+              </Field2>
+              <Field2 label={t('awed.refValidTo')}>
+                <Input type="date" className="h-8 w-44" value={sel.valid_to ?? ''}
+                  onChange={(e) => patchSel({ valid_to: e.target.value })} />
+              </Field2>
+              <p className="text-xs text-muted-foreground">
+                {(awardValidFrom || awardValidTo)
+                  ? t('awed.refValidHintAward', { from: openEnded(awardValidFrom), to: openEnded(awardValidTo) })
+                  : t('awed.refValidHint')}
+              </p>
+              <div className="flex justify-end pt-1"><Button size="sm" className="h-7" onClick={() => sel && saveSelected(sel)}><Save className="size-3.5 mr-1" /> {t('awed.saveReference')}</Button></div>
             </div>
           )}
         </div>

frontend/src/components/AwardRefSelector.tsx

@@ -1,6 +1,6 @@
 import { useEffect, useMemo, useState } from 'react';
 import { X, Plus, Loader2 } from 'lucide-react';
-import { SearchAwardReferences, GetAwardDefs, GetAwardReferenceMeta } from '../../wailsjs/go/main/App';
+import { SearchAwardReferences, GetAwardDefs, GetAwardReferenceMeta, AwardRefsNew } from '../../wailsjs/go/main/App';
 import {
   Select, SelectTrigger, SelectValue, SelectContent, SelectItem,
 } from '@/components/ui/select';
@@ -54,6 +54,34 @@ export function AwardRefSelector({ dxcc, value, onChange, fieldValues, heightCla
 
   const entries = value ? value.split(';').filter(Boolean) : [];
 
+  // Which of the picked references have never been worked. Asked of the backend
+  // only when the list of references actually changes — a handful of times per
+  // QSO — and it answers from an in-memory set (see awardnew.go).
+  //
+  // The first question about an award may arrive before its set is built, in
+  // which case the answer is "pending" and carries no verdict for it: we ask
+  // again rather than badge on a guess. Attempts are capped so a logbook that
+  // never finishes building cannot leave a timer running for the session.
+  const [isNew, setIsNew] = useState<Record<string, boolean>>({});
+  const entriesKey = entries.join(';');
+  useEffect(() => {
+    if (!entriesKey) { setIsNew({}); return; }
+    let alive = true;
+    let timer: number | undefined;
+    let tries = 0;
+    const ask = () => {
+      AwardRefsNew(entriesKey.split(';'))
+        .then((r: any) => {
+          if (!alive) return;
+          setIsNew(r?.new ?? {});
+          if (r?.pending && ++tries < 10) timer = window.setTimeout(ask, 700);
+        })
+        .catch(() => { if (alive) setIsNew({}); }); // no badge beats a wrong one
+    };
+    ask();
+    return () => { alive = false; if (timer) window.clearTimeout(timer); };
+  }, [entriesKey]);
+
   // When the reference set is cleared (a QSO was logged or the call was reset),
   // also blank the picker's own state — the search box and the highlighted /
   // selected reference — so the Awards tab starts fresh for the next contact.
@@ -256,7 +284,16 @@ export function AwardRefSelector({ dxcc, value, onChange, fieldValues, heightCla
                 }`}
                 onClick={() => setSelectedEntry(selectedEntry === entry ? null : entry)}
               >
-                <span className="font-mono font-semibold flex-1 truncate">{entry}</span>
+                <span className="font-mono font-semibold truncate">{entry}</span>
+                {isNew[entry] && (
+                  <span
+                    title={t('awrs.newRefHint')}
+                    className="shrink-0 px-1 rounded-sm text-[9px] leading-[14px] font-semibold tracking-wide bg-success-muted text-success border border-success-border"
+                  >
+                    {t('awrs.new')}
+                  </span>
+                )}
+                <span className="flex-1" />
                 <button
                   className="shrink-0 hover:text-destructive"
                   onClick={(e) => { e.stopPropagation(); removeEntry(entry); }}

frontend/src/components/AwardsPanel.tsx

@@ -1,11 +1,13 @@
 import { useEffect, useMemo, useState } from 'react';
 import { Award as AwardIcon, RefreshCw, Loader2, Search, Pencil, X, Grid3x3, List, BarChart3, AlertTriangle, ChevronUp, ChevronDown } from 'lucide-react';
-import { GetAwardDefs, GetAward, AwardCellQSOs, GetAwardStats, AwardMissingQSOs, ListAwardReferences, AssignAwardRefToQSOs, RescanAwards } from '../../wailsjs/go/main/App';
+import { GetAwardDefs, GetAward, AwardCellQSOs, GetAwardStats, AwardMissingQSOs, ListAwardReferences, AssignAwardRefToQSOs, RescanAwards, GetTrackedAwards } from '../../wailsjs/go/main/App';
+import { EventsOn } from '../../wailsjs/runtime/runtime';
 import { Input } from '@/components/ui/input';
 import { Button } from '@/components/ui/button';
 import { Checkbox } from '@/components/ui/checkbox';
 import { Select, SelectTrigger, SelectValue, SelectContent, SelectItem } from '@/components/ui/select';
 import { cn } from '@/lib/utils';
+import { isQSLConfirmed } from '@/lib/qsl';
 import { AwardEditor } from '@/components/AwardEditor';
 import { useI18n } from '@/lib/i18n';
 import { writeUiPref } from '@/lib/uiPref';
@@ -15,6 +17,8 @@ type AwardRef = {
   ref: string; name?: string; group?: string; subgrp?: string;
   worked: boolean; confirmed: boolean; validated: boolean;
   bands: string[]; confirmed_bands: string[]; validated_bands: string[];
+  // Mode CLASSES — "CW" | "PHONE" | "DIGI" — not ADIF modes.
+  modes?: string[]; confirmed_modes?: string[];
 };
 type AwardResult = {
   code: string; name: string; dimension: string;
@@ -60,13 +64,22 @@ function ProgressBar({ worked, confirmed, total }: { worked: number; confirmed:
   );
 }
 
-type AwardListItem = { code: string; name: string; valid?: boolean; bands?: string[]; emission?: string[] };
+// scoped: the award is limited to one or more DXCC entities. Missing-reference
+// detection only means anything for those — see the Missing refs button.
+type AwardListItem = { code: string; name: string; valid?: boolean; bands?: string[]; emission?: string[]; scoped?: boolean };
 
-export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: number) => void; onAwardsChanged?: () => void } = {}) {
+export function AwardsPanel({ onEditQSO, onAwardsChanged, onPaperQSL }: {
+  onEditQSO?: (id: number) => void;
+  onAwardsChanged?: () => void;
+  onPaperQSL?: (call: string) => void;
+} = {}) {
   const { t } = useI18n();
   const [awardList, setAwardList] = useState<AwardListItem[]>([]);
   // Computed results are cached per award code — each award is scanned only the
   // first time it's selected (or when explicitly rescanned).
+  // Keyed by "CODE|MODECLASS": the same award computed for CW and for all modes
+  // are different results, and caching them under one key showed the previous
+  // mode’s numbers after switching.
   const [byCode, setByCode] = useState<Record<string, AwardResult>>({});
   const [loading, setLoading] = useState(false);
   const [err, setErr] = useState('');
@@ -75,6 +88,10 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
   const [editing, setEditing] = useState(false);
   const [view, setView] = useState<'grid' | 'list' | 'stats'>('grid');
   const [refFilter, setRefFilter] = useState<'all' | 'worked' | 'notworked' | 'worked_notconf'>('all');
+  // Mode filter, stacked ON TOP of the status one. "Worked on CW but not
+  // confirmed" is two questions at once, and answering only one of them is what
+  // sends an operator to a spreadsheet.
+  const [modeFilter, setModeFilter] = useState<'all' | 'CW' | 'PHONE' | 'DIGI'>('all');
   const [cell, setCell] = useState<{ ref: string; band: string; name?: string } | null>(null);
   const [showMissing, setShowMissing] = useState(false);
   const [stats, setStats] = useState<AwardStats | null>(null);
@@ -113,13 +130,14 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
   // Compute one award (cached). force=true bypasses the cache (Rescan).
   async function compute(code: string, force = false) {
     if (!code) return;
-    if (!force && byCode[code]) { setSelected(code); return; }
+    const key = `${code}|${modeFilter}`;
+    if (!force && byCode[key]) { setSelected(code); return; }
     setSelected(code);
     setLoading(true);
     setErr('');
     try {
-      const r = (await GetAward(code)) as any as AwardResult;
+      const r = (await GetAward(code, modeFilter === 'all' ? '' : modeFilter)) as any as AwardResult;
-      setByCode((m) => ({ ...m, [code]: r }));
+      setByCode((m) => ({ ...m, [key]: r }));
     } catch (e: any) {
       setErr(String(e?.message ?? e));
     } finally {
@@ -127,13 +145,20 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
     }
   }
 
-  // Load the award list (no QSO scan), then compute only the first award.
+  // Load the award list (no QSO scan), then compute only the first award. The
+  // list is narrowed to the awards the operator follows (Settings → Awards); an
+  // empty follow-set means "show them all" so the tab is never blank.
   async function loadList() {
     try {
-      const defs = ((await GetAwardDefs()) ?? []) as any[];
+      const [defs, tracked] = await Promise.all([
-      const list: AwardListItem[] = defs
+        GetAwardDefs().then((d) => (d ?? []) as any[]),
-        .map((d) => ({ code: d.code, name: d.name, valid: d.valid, bands: d.valid_bands ?? [], emission: d.emission ?? [] }))
+        GetTrackedAwards().then((t) => (t ?? []) as string[]).catch(() => [] as string[]),
+      ]);
+      const follow = new Set(tracked);
+      let list: AwardListItem[] = defs
+        .map((d) => ({ code: d.code, name: d.name, valid: d.valid, bands: d.valid_bands ?? [], emission: d.emission ?? [], scoped: (d.dxcc_filter ?? []).length > 0 }))
         .sort((a, b) => a.code.localeCompare(b.code));
+      if (follow.size > 0) list = list.filter((a) => follow.has(a.code));
       setAwardList(list);
       const first = list.find((a) => a.code === selected) ?? list[0];
       if (first) compute(first.code);
@@ -142,8 +167,17 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
     }
   }
   useEffect(() => { loadList(); }, []);
+  // Re-filter when the operator changes their followed awards in Settings.
+  useEffect(() => {
+    const off = EventsOn('awards:tracked-changed', () => { loadList(); });
+    return () => { off(); };
+    // eslint-disable-next-line react-hooks/exhaustive-deps
+  }, []);
 
-  const current = byCode[selected];
+  const current = byCode[`${selected}|${modeFilter}`];
+  // Recompute when the mode class changes: the bands, counts and confirmations
+  // all describe the selected mode, so they cannot be filtered client-side.
+  useEffect(() => { if (selected) compute(selected); /* eslint-disable-next-line react-hooks/exhaustive-deps */ }, [modeFilter]);
 
   // Bands relevant to the selected award, used by BOTH the grid and the stats
   // matrix so neither is padded with bands the award doesn't use. Rule: the
@@ -198,11 +232,14 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
   // Alicante" — which reference order scatters across the whole table.
   // Remembered through writeUiPref rather than localStorage, so the choice
   // travels with a copied data/ folder like every other UI preference here.
-  const [refSort, setRefSort] = useState<'ref' | 'name'>(
+  const [refSort, setRefSort] = useState<'ref' | 'name' | 'group'>(
-    () => (localStorage.getItem('opslog.awardRefSort') === 'name' ? 'name' : 'ref'));
+    () => {
+      const v = localStorage.getItem('opslog.awardRefSort');
+      return v === 'name' || v === 'group' ? v : 'ref';
+    });
   const [refSortDir, setRefSortDir] = useState<'asc' | 'desc'>(
     () => (localStorage.getItem('opslog.awardRefSortDir') === 'desc' ? 'desc' : 'asc'));
-  const toggleRefSort = (k: 'ref' | 'name') => {
+  const toggleRefSort = (k: 'ref' | 'name' | 'group') => {
     if (k === refSort) {
       const d = refSortDir === 'asc' ? 'desc' : 'asc';
       setRefSortDir(d);
@@ -222,6 +259,16 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
       if (refFilter === 'worked' && !r.worked) return false;
       if (refFilter === 'notworked' && r.worked) return false;
       if (refFilter === 'worked_notconf' && !(r.worked && !r.confirmed)) return false;
+      if (modeFilter !== 'all' && refFilter !== 'notworked') {
+        // A reference never worked has no mode, so "not worked" plus a mode is
+        // a contradiction: the mode filter stands aside rather than emptying
+        // the list.
+        if (!(r.modes ?? []).includes(modeFilter)) return false;
+        // Not-confirmed must mean not confirmed ON THIS MODE. An entity worked
+        // on CW and confirmed on SSB is still a CW entity to chase, and the
+        // whole point of the filter is to find those.
+        if (refFilter === 'worked_notconf' && (r.confirmed_modes ?? []).includes(modeFilter)) return false;
+      }
       if (q && !(r.ref.includes(q) || (r.name ?? '').toUpperCase().includes(q) || (r.group ?? '').toUpperCase().includes(q))) return false;
       return true;
     });
@@ -235,9 +282,25 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
         if (c !== 0) return c * dir;
         return a.ref.localeCompare(b.ref) * dir; // stable tie-break
       }
+      if (refSort === 'group') {
+        // Prefix order (XE, YV, ZL…) — how a DX operator actually thinks about
+        // entities. Blank prefixes sink to the bottom regardless of direction,
+        // so an unresolved entity never heads the list.
+        const ag = a.group ?? '', bg = b.group ?? '';
+        if (!ag !== !bg) return ag ? -1 : 1;
+        const c = ag.localeCompare(bg, undefined, { sensitivity: 'base' });
+        if (c !== 0) return c * dir;
+        return a.ref.localeCompare(b.ref, undefined, { numeric: true }) * dir;
+      }
       return a.ref.localeCompare(b.ref, undefined, { numeric: true }) * dir;
     });
-  }, [current, refSearch, refFilter, refSort, refSortDir]);
+  }, [current, refSearch, refFilter, modeFilter, refSort, refSortDir]);
+
+  // The group column earns its width only when the list actually carries one
+  // (DXCC prefixes, POTA locations); most custom lists have none. For DXCC the
+  // value IS the primary prefix, so it is labelled as such.
+  const hasGroup = useMemo(() => filteredRefs.some((r) => !!r.group), [filteredRefs]);
+  const groupColLabel = current && current.code.toUpperCase() === 'DXCC' ? t('awp.prefixCol') : t('awp.groupCol');
 
   return (
     <div className="flex h-full min-h-0">
@@ -276,7 +339,7 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
         <div className="flex-1 overflow-auto">
           {err && <div className="p-3 text-xs text-destructive">{err}</div>}
           {awardList.map((a) => {
-            const r = byCode[a.code];
+            const r = byCode[`${a.code}|${modeFilter}`];
             return (
               <button
                 key={a.code}
@@ -361,14 +424,30 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
                   </button>
                 ))}
               </div>
+              <div className="flex items-center rounded-md border border-border overflow-hidden text-sm">
+                {([['all', t('awp.filterAll')], ['CW', 'CW'], ['PHONE', t('awp.modePhone')], ['DIGI', t('awp.modeDigital')]] as const).map(([k, label]) => (
+                  <button key={k} onClick={() => setModeFilter(k)}
+                    className={cn('px-2 py-1', modeFilter === k ? 'bg-accent font-medium' : 'hover:bg-accent/50 text-muted-foreground')}>
+                    {label}
+                  </button>
+                ))}
+              </div>
               <span className="text-xs text-muted-foreground">{filteredRefs.length} {t('awp.refs')}</span>
-              <button
+              {/* Only for an award scoped to a DXCC entity. "In this award's
-                onClick={() => setShowMissing(true)}
+                  scope but with no reference" needs a scope to be in: on a
-                className="flex items-center gap-1 text-xs text-warning-muted-foreground hover:text-warning border border-warning-border bg-warning-muted rounded px-2 py-1"
+                  worldwide reference award — POTA, SOTA, IOTA, WWFF — every
-                title={t('awp.missingRefsTitle')}
+                  contact anywhere would qualify, so the answer is always none.
-              >
+                  The button used to be there regardless and could only ever
-                <AlertTriangle className="size-3" /> {t('awp.missingRefs')}
+                  open a window saying it had found nothing. */}
-              </button>
+              {awardList.find((a) => a.code === selected)?.scoped && (
+                <button
+                  onClick={() => setShowMissing(true)}
+                  className="flex items-center gap-1 text-xs text-warning-muted-foreground hover:text-warning border border-warning-border bg-warning-muted rounded px-2 py-1"
+                  title={t('awp.missingRefsTitle')}
+                >
+                  <AlertTriangle className="size-3" /> {t('awp.missingRefs')}
+                </button>
+              )}
               <div className="flex-1" />
               {/* Legend */}
               <div className="flex items-center gap-2 text-[10px] text-muted-foreground">
@@ -428,6 +507,14 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
                           {refSort === 'ref' && (refSortDir === 'asc' ? <ChevronUp className="size-3" /> : <ChevronDown className="size-3" />)}
                         </button>
                       </th>
+                      {hasGroup && (
+                        <th className="text-left py-1.5 pr-3 font-medium border-b border-border w-20">
+                          <button type="button" onClick={() => toggleRefSort('group')} className="inline-flex items-center gap-1 hover:text-foreground">
+                            {groupColLabel}
+                            {refSort === 'group' && (refSortDir === 'asc' ? <ChevronUp className="size-3" /> : <ChevronDown className="size-3" />)}
+                          </button>
+                        </th>
+                      )}
                       <th className="text-left py-1.5 pr-3 font-medium border-b border-border">
                         <button type="button" onClick={() => toggleRefSort('name')} className="inline-flex items-center gap-1 hover:text-foreground">
                           {t('awp.description')}
@@ -443,9 +530,10 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
                     {filteredRefs.map((r) => (
                       <tr key={r.ref} className={cn('hover:bg-accent/20', !r.worked && 'opacity-60')}>
                         <td className="sticky left-0 bg-card hover:bg-accent/20 py-1 pr-2 font-mono font-semibold border-b border-border/30">{r.ref}</td>
-                        <td className="py-1 pr-3 text-muted-foreground truncate max-w-[360px] border-b border-border/30">
+                        {hasGroup && (
-                          {r.name}{r.group ? <span className="text-muted-foreground/60"> · {r.group}</span> : ''}
+                          <td className="py-1 pr-3 font-mono font-semibold border-b border-border/30">{r.group}</td>
-                        </td>
+                        )}
+                        <td className="py-1 pr-3 text-muted-foreground truncate max-w-[360px] border-b border-border/30">{r.name}</td>
                         {gridBands.map((b) => {
                           const s = cellStatus(r, b);
                           return (
@@ -482,7 +570,12 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
                           {refSort === 'name' && (refSortDir === 'asc' ? <ChevronUp className="size-3" /> : <ChevronDown className="size-3" />)}
                         </button>
                       </th>
-                      <th className="py-1.5 pr-2 font-medium w-40">{t('awp.groupCol')}</th>
+                      <th className="py-1.5 pr-2 font-medium w-40">
+                        <button type="button" onClick={() => toggleRefSort('group')} className="inline-flex items-center gap-1 hover:text-foreground">
+                          {groupColLabel}
+                          {refSort === 'group' && (refSortDir === 'asc' ? <ChevronUp className="size-3" /> : <ChevronDown className="size-3" />)}
+                        </button>
+                      </th>
                       <th className="py-1.5 pr-2 font-medium w-24">{t('awp.status')}</th>
                       <th className="py-1.5 font-medium">{t('awp.bands')}</th>
                     </tr>
@@ -515,7 +608,7 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
       </div>
 
       {cell && current && (
-        <CellQSOModal code={current.code} cell={cell} onClose={() => setCell(null)} />
+        <CellQSOModal code={current.code} cell={cell} modeClass={modeFilter === 'all' ? '' : modeFilter} onClose={() => setCell(null)} onPaperQSL={onPaperQSL} />
       )}
       {showMissing && current && (
         <MissingQSOModal code={current.code} name={current.name} onClose={() => setShowMissing(false)} onEditQSO={onEditQSO} />
@@ -529,6 +622,10 @@ export function AwardsPanel({ onEditQSO, onAwardsChanged }: { onEditQSO?: (id: n
 // the missing reference (e.g. a department for DDFM).
 type MissingSortKey = 'qso_date' | 'callsign' | 'band' | 'mode' | 'country' | 'qth';
 
+// How many references the assign dropdown will put in the DOM at once. Above
+// this a search box appears beside it and the rest are held back, counted.
+const REF_MENU_MAX = 300;
+
 function MissingQSOModal({ code, name, onClose, onEditQSO }: { code: string; name: string; onClose: () => void; onEditQSO?: (id: number) => void }) {
   const { t } = useI18n();
   const [qsos, setQsos] = useState<any[]>([]);
@@ -537,6 +634,7 @@ function MissingQSOModal({ code, name, onClose, onEditQSO }: { code: string; nam
   const [sortKey, setSortKey] = useState<MissingSortKey>('callsign');
   const [sortDir, setSortDir] = useState<'asc' | 'desc'>('asc');
   const [refs, setRefs] = useState<Array<{ code: string; name: string }>>([]);
+  const [refSearch, setRefSearch] = useState('');
   const [assignRef, setAssignRef] = useState('');
   const [busy, setBusy] = useState(false);
   const [msg, setMsg] = useState('');
@@ -550,12 +648,38 @@ function MissingQSOModal({ code, name, onClose, onEditQSO }: { code: string; nam
       .finally(() => setLoading(false));
   };
   useEffect(() => { load(); }, [code]);
-  // The award's reference list drives the "assign" dropdown (e.g. China provinces).
+  // The award's reference list drives the "assign" dropdown (e.g. China
+  // provinces) — fetched ONLY once there is something to assign it to.
+  //
+  // Missing-reference detection needs a DXCC scope, so a worldwide award like
+  // POTA always has zero rows here and says so. It was still loading every
+  // reference behind that message: on a log with the full POTA park list
+  // imported, tens of thousands of them, feeding a dropdown that could not be
+  // used for anything. That is the window freezing on a screen with nothing to
+  // offer.
   useEffect(() => {
+    if (loading || qsos.length === 0) { setRefs([]); return; }
     ListAwardReferences(code)
       .then((r) => setRefs(((r ?? []) as any[]).map((x) => ({ code: String(x.code).toUpperCase(), name: String(x.name ?? '') }))))
       .catch(() => setRefs([]));
-  }, [code]);
+  }, [code, loading, qsos.length]);
+
+  // What the assign dropdown actually renders. Bounded, and it says how many it
+  // is holding back rather than silently showing the first few hundred.
+  const shownRefs = useMemo(() => {
+    const q = refSearch.trim().toUpperCase();
+    const rows = q
+      ? refs.filter((r) => r.code.includes(q) || r.name.toUpperCase().includes(q))
+      : refs;
+    return rows.slice(0, REF_MENU_MAX);
+  }, [refs, refSearch]);
+  const hiddenRefs = useMemo(() => {
+    const q = refSearch.trim().toUpperCase();
+    const total = q
+      ? refs.filter((r) => r.code.includes(q) || r.name.toUpperCase().includes(q)).length
+      : refs.length;
+    return Math.max(0, total - shownRefs.length);
+  }, [refs, refSearch, shownRefs.length]);
 
   const qthOf = (q: any) => String(q.qth || q.notes || '');
   const sorted = useMemo(() => {
@@ -632,14 +756,29 @@ function MissingQSOModal({ code, name, onClose, onEditQSO }: { code: string; nam
         {/* Bulk-assign toolbar */}
         <div className="flex items-center gap-2 px-4 py-2 border-b border-border/50 bg-muted/20">
           <span className="text-xs text-muted-foreground">{t('awp.selectedArrow', { n: sel.size })}</span>
+          {/* A search box beside the dropdown, and a bounded list inside it.
+              A reference list can hold tens of thousands of entries (POTA
+              parks, Russian districts); every one of them as a menu item is
+              hundreds of thousands of DOM nodes and a window that stops
+              answering. Nobody scrolls to K-4521 anyway — they type it. */}
+          {refs.length > REF_MENU_MAX && (
+            <Input className="h-7 w-40 text-xs font-mono" value={refSearch}
+              placeholder={t('awp.filterReferences')}
+              onChange={(e) => setRefSearch(e.target.value)} />
+          )}
           <Select value={assignRef} onValueChange={setAssignRef}>
             <SelectTrigger className="h-7 w-64 text-xs"><SelectValue placeholder={t('awp.chooseReference')} /></SelectTrigger>
             <SelectContent className="max-h-72">
-              {refs.map((r) => (
+              {shownRefs.map((r) => (
                 <SelectItem key={r.code} value={r.code}>
                   <span className="font-mono font-semibold">{r.code}</span>{r.name ? <span className="text-muted-foreground"> · {r.name}</span> : ''}
                 </SelectItem>
               ))}
+              {hiddenRefs > 0 && (
+                <div className="px-2 py-1.5 text-[11px] text-muted-foreground">
+                  {t('awp.refsNarrow', { n: hiddenRefs })}
+                </div>
+              )}
             </SelectContent>
           </Select>
           <Button size="sm" disabled={!assignRef || sel.size === 0 || busy} onClick={applyAssign}>
@@ -700,17 +839,24 @@ function MissingQSOModal({ code, name, onClose, onEditQSO }: { code: string; nam
 }
 
 // CellQSOModal lists the QSOs behind one award-grid cell (reference × band).
-function CellQSOModal({ code, cell, onClose }: { code: string; cell: { ref: string; band: string; name?: string }; onClose: () => void }) {
+function CellQSOModal({ code, cell, modeClass, onClose, onPaperQSL }: {
+  code: string; cell: { ref: string; band: string; name?: string }; modeClass: string;
+  onClose: () => void;
+  // Send this callsign to the QSL Manager's Paper QSL view. Chasing a
+  // confirmation starts here — an unconfirmed entity, the contact behind it —
+  // and used to continue by retyping the callsign into another tab.
+  onPaperQSL?: (call: string) => void;
+}) {
   const { t } = useI18n();
   const [qsos, setQsos] = useState<any[]>([]);
   const [loading, setLoading] = useState(true);
   useEffect(() => {
     setLoading(true);
-    AwardCellQSOs(code, cell.ref, cell.band)
+    AwardCellQSOs(code, cell.ref, cell.band, modeClass)
       .then((r) => setQsos((r ?? []) as any))
       .catch(() => setQsos([]))
       .finally(() => setLoading(false));
-  }, [code, cell.ref, cell.band]);
+  }, [code, cell.ref, cell.band, modeClass]);
 
   const fmt = (s: any) => { const d = new Date(s); return isNaN(d.getTime()) ? '' : d.toISOString().slice(0, 16).replace('T', ' '); };
 
@@ -737,10 +883,18 @@ function CellQSOModal({ code, cell, onClose }: { code: string; cell: { ref: stri
                 {qsos.map((q, i) => (
                   <tr key={q.id ?? i} className="border-b border-border/30">
                     <td className="py-1 px-3 font-mono">{fmt(q.qso_date)}</td>
-                    <td className="py-1 pr-2 font-mono font-semibold">{q.callsign}</td>
+                    <td className="py-1 pr-2 font-mono font-semibold">
+                      {onPaperQSL ? (
+                        <button type="button" className="hover:underline text-primary"
+                          title={t('awp.paperQslTip')}
+                          onClick={() => { onPaperQSL(String(q.callsign ?? '')); onClose(); }}>
+                          {q.callsign}
+                        </button>
+                      ) : q.callsign}
+                    </td>
                     <td className="py-1 pr-2">{q.band}</td>
                     <td className="py-1 pr-2">{q.mode}</td>
-                    <td className="py-1 pr-3 text-muted-foreground">{[q.lotw_rcvd === 'Y' && 'LoTW', q.qsl_rcvd === 'Y' && 'QSL', q.eqsl_rcvd === 'Y' && 'eQSL'].filter(Boolean).join(', ')}</td>
+                    <td className="py-1 pr-3 text-muted-foreground">{[isQSLConfirmed(q.lotw_rcvd) && 'LoTW', isQSLConfirmed(q.qsl_rcvd) && 'QSL', isQSLConfirmed(q.eqsl_rcvd) && 'eQSL'].filter(Boolean).join(', ')}</td>
                   </tr>
                 ))}
               </tbody>

frontend/src/components/BandMap.tsx

@@ -1,8 +1,11 @@
-import { useEffect, useMemo, useRef, useState } from 'react';
+import { useCallback, useEffect, useMemo, useRef, useState } from 'react';
 import { Minus, Plus, Crosshair, X, PanelLeft, PanelRight } from 'lucide-react';
 import { cn } from '@/lib/utils';
 import { useI18n } from '@/lib/i18n';
 import { spotStatusKey, inferSpotMode, spotModeCategory } from '@/lib/spot';
+import { SPOT_MARKERS, activeMarkers } from '@/lib/spotMarkers';
+import { applySpotDisplay, readSpotDisplayOptions } from '@/lib/spotDisplay';
+import { writeUiPref } from '@/lib/uiPref';
 
 // BandMap — vertical spectrum panel inspired by Log4OM.
 // - Full band is always visible; zoom changes pixels-per-kHz, scroll
@@ -22,9 +25,58 @@ interface Spot {
   band?: string;
   comment?: string;
   spotter?: string;
+  // The park reference the POTA poller tagged this spot with. The map never
+  // reads it — the click handler upstream turns it into the QSO's POTA award
+  // reference — but it is declared so it cannot be lost by accident.
+  //
+  // It travelled only because the spot objects are passed through by reference
+  // and the type was erased. The first refactor to copy a spot field by field
+  // would have dropped the park silently, and the only symptom would be an
+  // activation logged without its reference. Same mistake as the status entry
+  // below, whose extra markers were arriving and undeclared.
+  pota_ref?: string;
 }
 
-type SpotStatusEntry = { status: string; country?: string };
+// The FULL status entry, not the two fields the map used to declare. The extra
+// markers were already arriving in this object — the local type simply never
+// mentioned them, so they could not be drawn.
+type SpotStatusEntry = {
+  status?: string;
+  country?: string;
+  worked_call?: boolean;
+  // worked_slot: this exact callsign already worked on THIS band and mode.
+  worked_slot?: boolean;
+  new_county?: boolean;
+  new_pota?: boolean;
+  new_pfx?: boolean;
+  // Whether the station uploads to LoTW. Not a status — it says nothing about
+  // whether the spot is worth chasing — so it is drawn as a badge, never a colour.
+  lotw?: boolean;
+};
+
+// The extra markers are ORTHOGONAL to the entity status: a spot can be a worked
+// entity AND a new park. The cluster list stacks them as separate badges instead
+// of letting one replace another, so the map stacks them too — as segments of
+// the pill's left accent bar, which until now only repeated the pill's own
+// colour and carried no information of its own.
+//
+// Their colours come from lib/spotMarkers, shared with the cluster list: the
+// same fact must not be violet in one panel and green in the next.
+// The map shows three of the five. A new PREFIX and a new GRID are left to the
+// cluster list, which has the width to name them: the
+// pill is 22 px tall, and a fourth segment turns the strip into a colour code
+// nobody can read at a glance. Add it here the day the strip earns more room.
+const BMP_MARKERS = SPOT_MARKERS.filter((m) => m.key !== 'new_pfx' && m.key !== 'new_grid');
+const markersFor = (e: SpotStatusEntry | undefined) =>
+  activeMarkers(e).filter((m) => m.key !== 'new_pfx' && m.key !== 'new_grid');
+
+// The legend spells the markers out; the cluster list's badges are abbreviated
+// ("NEW CTY") because they sit in a narrow cell, and there is room here.
+const BMP_MARKER_LABEL: Record<string, string> = {
+  new_pota: 'bmp.legendNewPota',
+  new_county: 'bmp.legendNewCounty',
+  worked_call: 'bmp.legendWorkedCall',
+};
 
 interface Props {
   band: string;
@@ -41,6 +93,14 @@ interface Props {
   // globally from the band-map tab toolbar.
   hideDigital?: boolean;
   fitToBand?: boolean;
+  // onToggleFit and onToggleHideDigital add the two switches to this map's own
+  // header. Only the docked map passes them: the Band Map tab has both in its
+  // toolbar, above maps that all obey them at once, and a switch inside each
+  // card as well would be four ways to change one setting.
+  onToggleFit?: () => void;
+  onToggleHideDigital?: () => void;
+  // Mark stations that upload to LoTW (Settings → Appearance).
+  showLotw?: boolean;
   // keyNav enables Ctrl+↑ / Ctrl+↓ to hop to the next spot above / below the rig
   // frequency (and tune to it). Only the docked Main-view band map sets this, so
   // the multi-band Band Map tab (several maps) doesn't fight over the shortcut.
@@ -115,20 +175,39 @@ function LegendDot({ cls, colour, label }: { cls?: string; colour?: string; labe
 function statusLabel(s: string, t: (k: string) => string): string {
   switch (s) {
     case 'new':      return t('bmp.statusNew');
+    case 'new-band-mode': return t('bmp.statusNewBandMode');
     case 'new-band': return t('bmp.statusNewBand');
+    case 'new-mode': return t('bmp.statusNewMode');
     case 'new-slot': return t('bmp.statusNewSlot');
+    case 'new-call': return t('bmp.statusNewCall');
     case 'worked':   return t('bmp.statusWorked');
+    // An empty status means the entity could not be resolved. Nothing else
+    // empties it: the mute option leaves the status alone and takes only the
+    // already-worked-callsign mark.
     default:         return t('bmp.statusUnresolved');
   }
 }
 
+// QUIET: no status colour at all. The pill keeps the card background and the
+// accent drops to a plain border grey, so the spot is present but says nothing.
+const QUIET_STYLE = {
+  pill: 'bg-card text-muted-foreground border-border/60 hover:bg-muted/50',
+  bar:  'bg-muted-foreground/30',
+  line: 'stroke-border',
+  dot:  'fill-border',
+};
+
 function statusStyle(s: string): { pill: string; bar: string; line: string; dot: string } {
   // pill = full pill background+text+border
   // bar  = thick left accent inside the pill
   // line = SVG leader stroke (visible on hover)
   // dot  = small marker on the freq scale
   switch (s) {
-    case 'new':      return {
+    // NEW and NEW BAND+MODE share the strongest colour: both mean "there is
+    // something here you have never had", and a sixth shade in a palette read at
+    // a glance is a shade nobody can name.
+    case 'new':
+    case 'new-band-mode': return {
       pill: 'bg-danger-muted text-danger-muted-foreground border-danger-border hover:bg-danger-muted',
       bar:  'bg-danger',
       line: 'stroke-danger',
@@ -140,18 +219,14 @@ function statusStyle(s: string): { pill: string; bar: string; line: string; dot:
       line: 'stroke-warning',
       dot:  'fill-warning',
     };
+    case 'new-call':
     case 'new-slot': return {
       pill: 'bg-caution-muted text-caution-muted-foreground border-caution-border hover:bg-caution-muted',
       bar:  'bg-caution',
       line: 'stroke-caution',
       dot:  'fill-caution',
     };
-    case 'worked':   return {
+    case 'worked':   return QUIET_STYLE;
-      pill: 'bg-card text-muted-foreground border-border/60 hover:bg-muted/50',
-      bar:  'bg-muted-foreground/30',
-      line: 'stroke-border',
-      dot:  'fill-border',
-    };
     default:         return {
       pill: 'bg-card text-foreground border-border hover:bg-accent/40',
       bar:  'bg-primary/60',
@@ -164,7 +239,37 @@ function statusStyle(s: string): { pill: string; bar: string; line: string; dot:
 // Pixels-per-kHz at each zoom step. Base 8 px/kHz means a stacked spot
 // every 2.75 kHz fits without anti-overlap kicking in — comfortable for
 // most bands. Higher levels are for fine inspection of crowded sub-bands.
-const PX_PER_KHZ = [8, 16, 32, 64, 128, 256];
+// Zoom steps, px per kHz. 2 and 4 sit below the old floor of 8 so a whole band
+// fits without FIT taking the scale away from you: 20 m end to end is 700 px at
+// 2 px/kHz, which scrolls in one screen on most displays.
+const PX_PER_KHZ = [2, 4, 8, 16, 32, 64, 128, 256];
+const DEFAULT_ZOOM_IDX = PX_PER_KHZ.indexOf(32);
+
+// Zoom is remembered PER BAND, in ONE json key rather than one key per band:
+// lib/uiPref keeps an explicit list of the preferences that travel with data/,
+// and thirteen entries there to say the same thing would be thirteen chances to
+// forget one.
+const ZOOM_KEY = 'opslog.bandMapZoom';
+
+function readZoomMap(): Record<string, number> {
+  try {
+    const m = JSON.parse(localStorage.getItem(ZOOM_KEY) || '{}');
+    return m && typeof m === 'object' ? m : {};
+  } catch {
+    return {};
+  }
+}
+
+function readZoom(band: string): number {
+  const n = readZoomMap()[band];
+  return Number.isInteger(n) && n >= 0 && n < PX_PER_KHZ.length ? n : DEFAULT_ZOOM_IDX;
+}
+
+function writeZoom(band: string, idx: number): void {
+  const m = readZoomMap();
+  m[band] = idx;
+  writeUiPref(ZOOM_KEY, JSON.stringify(m));
+}
 const SCALE_W = 56;
 const PILL_H = 22;     // px — height of each callsign pill
 const PILL_GAP = 32;   // px between scale border and first pill (room for leader)
@@ -179,11 +284,42 @@ const BOT_PAD = 14;    // the top-most freq label isn't clipped at y=0
 // last; ties broken by closeness to the rig freq).
 const MAX_VISIBLE_SPOTS = 30;
 
-export function BandMap({ band, spots, spotStatus, currentFreqHz, onSpotClick, onClose, side = 'right', onToggleSide, hideDigital = false, fitToBand = false, keyNav = false }: Props) {
+export function BandMap({ band, spots, spotStatus: spotStatusRaw, currentFreqHz, onSpotClick, onClose, side = 'right', onToggleSide, hideDigital = false, fitToBand = false, onToggleFit, onToggleHideDigital, keyNav = false, showLotw = false }: Props) {
   const { t } = useI18n();
+
+  // The two display options are applied ONCE here, on the whole map, so the
+  // leader lines, the dots, the pills and the badges can never disagree — and so
+  // the map and the cluster list share the single rule set in lib/spotDisplay.
+  // Re-derived whenever the poll delivers a new status map, which is also when a
+  // just-changed option takes effect.
+  // Read at render time, not inside the memo: the options must be part of the
+  // dependencies. Keyed only on spotStatusRaw, toggling an option changed
+  // nothing until the next poll happened to hand over a fresh object.
+  const dispOpts = readSpotDisplayOptions();
+  const spotStatus = useMemo(() => {
+    if (!dispOpts.muteWorked && !dispOpts.slotHighlight) return spotStatusRaw;
+    const out: Record<string, SpotStatusEntry> = {};
+    for (const k of Object.keys(spotStatusRaw)) out[k] = applySpotDisplay(spotStatusRaw[k], dispOpts) as SpotStatusEntry;
+    return out;
+  }, [spotStatusRaw, dispOpts.muteWorked, dispOpts.slotHighlight]);
   const range = BAND_RANGES[band];
   const segments = SEGMENT_COLORS[band] ?? [];
-  const [zoomIdx, setZoomIdx] = useState(2); // default 32 px/kHz
+  const [zoomIdx, setZoomIdx] = useState(() => readZoom(band));
+  // The docked map follows the rig, so a band change must bring up THAT band's
+  // remembered zoom.
+  useEffect(() => { setZoomIdx(readZoom(band)); }, [band]);
+  // Stored from the interaction, not from an effect on zoomIdx: an effect would
+  // also fire on the band change above, and in the same commit it would still be
+  // holding the PREVIOUS band's index — writing it over the new band's. Doing it
+  // where the operator actually turns the wheel keeps the two apart. (Running
+  // twice under StrictMode is harmless: the same value is stored.)
+  const changeZoom = useCallback((delta: number) => {
+    setZoomIdx((z) => {
+      const n = Math.max(0, Math.min(PX_PER_KHZ.length - 1, z + delta));
+      if (n !== z) writeZoom(band, n);
+      return n;
+    });
+  }, [band]);
   const scrollerRef = useRef<HTMLDivElement | null>(null);
   const [containerH, setContainerH] = useState(400);
 
@@ -246,8 +382,10 @@ export function BandMap({ band, spots, spotStatus, currentFreqHz, onSpotClick, o
       const k = spotStatusKey(s.dx_call, s.band ?? '', s.comment ?? '', s.freq_hz);
       switch (spotStatus[k]?.status ?? '') {
         case 'new':      return 0;
+        case 'new-band-mode': return 0;
         case 'new-band': return 1;
         case 'new-slot': return 2;
+        case 'new-call': return 2;
         case 'worked':   return 4;
         default:         return 3;
       }
@@ -351,46 +489,21 @@ export function BandMap({ band, spots, spotStatus, currentFreqHz, onSpotClick, o
       if (!range) return;
       if (e.ctrlKey || e.metaKey) {
         e.preventDefault();
-        setZoomIdx((z) => Math.max(0, Math.min(PX_PER_KHZ.length - 1, z + (e.deltaY > 0 ? -1 : 1))));
+        changeZoom(e.deltaY > 0 ? -1 : 1);
       }
     };
     el.addEventListener('wheel', onWheel, { passive: false });
     return () => el.removeEventListener('wheel', onWheel);
   }, [range]);
 
-  if (!range) {
-    return (
-      <div className="h-full w-full flex flex-col items-center justify-center text-xs text-muted-foreground p-3 bg-muted/20">
-        <div className="text-sm font-semibold mb-1">{t('bmp.bandMap')}</div>
-        {t('bmp.notConfigured', { band: band || '—' })}
-      </div>
-    );
-  }
-
-  // Tick step (where small marks land) and label step (where the kHz
-  // number is printed) are decoupled so the scale shows ~10-20 numeric
-  // labels per viewport regardless of zoom — at base 8 px/kHz we want
-  // labels every 25 kHz, not every 250.
-  let tickStep = 50;
-  let labelStep = 100;
-  if (pxPerKHz >= 4)   { tickStep = 25; labelStep = 50;  }
-  if (pxPerKHz >= 8)   { tickStep = 5;  labelStep = 25;  }
-  if (pxPerKHz >= 16)  { tickStep = 2;  labelStep = 10;  }
-  if (pxPerKHz >= 32)  { tickStep = 1;  labelStep = 5;   }
-  if (pxPerKHz >= 64)  { tickStep = 1;  labelStep = 2;   }
-  if (pxPerKHz >= 128) { tickStep = 1;  labelStep = 1;   }
-  const ticks: number[] = [];
-  for (let t = Math.ceil(lo / tickStep) * tickStep; t <= hi; t += tickStep) ticks.push(t);
-
-  function recenterOnRig() {
-    if (!scrollerRef.current || currentFreqHz <= 0) return;
-    const y = freqToY(currentFreqHz / 1000);
-    scrollerRef.current.scrollTop = Math.max(0, y - containerH / 2);
-  }
-
   // Ctrl+↑ / Ctrl+↓ hop to the next spot above / below the rig frequency and tune
   // to it. Higher freq is UP on the map (see freqToY), so ↑ = next higher spot.
   // Only active on the docked Main-view map (keyNav) and ignored while typing.
+  // MUST stay ABOVE the `if (!range)` early return below: on an unknown band
+  // (e.g. a spurious 33 cm CAT reading from an Icom) that return skipped this
+  // hook, so the hook count changed between renders and React crashed with #300
+  // ("rendered fewer hooks than expected"). lo/hi are always defined (they fall
+  // back to [0,1] when there's no range), so it's safe to run here.
   useEffect(() => {
     if (!keyNav) return;
     const onKey = (e: KeyboardEvent) => {
@@ -420,6 +533,38 @@ export function BandMap({ band, spots, spotStatus, currentFreqHz, onSpotClick, o
     return () => window.removeEventListener('keydown', onKey);
   }, [keyNav, spots, band, currentFreqHz, lo, hi, onSpotClick]);
 
+  if (!range) {
+    return (
+      <div className="h-full w-full flex flex-col items-center justify-center text-xs text-muted-foreground p-3 bg-muted/20">
+        <div className="text-sm font-semibold mb-1">{t('bmp.bandMap')}</div>
+        {t('bmp.notConfigured', { band: band || '—' })}
+      </div>
+    );
+  }
+
+  // Tick step (where small marks land) and label step (where the kHz
+  // number is printed) are decoupled so the scale shows ~10-20 numeric
+  // labels per viewport regardless of zoom — at 8 px/kHz we want labels
+  // every 25 kHz, not every 250. The bare values below are the floor, and
+  // they are what the 2 px/kHz step lands on: a whole band in one screen
+  // wants a number every 100 kHz, not every 25.
+  let tickStep = 50;
+  let labelStep = 100;
+  if (pxPerKHz >= 4)   { tickStep = 25; labelStep = 50;  }
+  if (pxPerKHz >= 8)   { tickStep = 5;  labelStep = 25;  }
+  if (pxPerKHz >= 16)  { tickStep = 2;  labelStep = 10;  }
+  if (pxPerKHz >= 32)  { tickStep = 1;  labelStep = 5;   }
+  if (pxPerKHz >= 64)  { tickStep = 1;  labelStep = 2;   }
+  if (pxPerKHz >= 128) { tickStep = 1;  labelStep = 1;   }
+  const ticks: number[] = [];
+  for (let t = Math.ceil(lo / tickStep) * tickStep; t <= hi; t += tickStep) ticks.push(t);
+
+  function recenterOnRig() {
+    if (!scrollerRef.current || currentFreqHz <= 0) return;
+    const y = freqToY(currentFreqHz / 1000);
+    scrollerRef.current.scrollTop = Math.max(0, y - containerH / 2);
+  }
+
   const currentKHz = currentFreqHz ? currentFreqHz / 1000 : 0;
   const showRigPointer = currentKHz >= lo && currentKHz <= hi;
   const rigY = freqToY(currentKHz);
@@ -427,18 +572,48 @@ export function BandMap({ band, spots, spotStatus, currentFreqHz, onSpotClick, o
   return (
     <div className="h-full w-full flex flex-col min-h-0 bg-card">
       <div className="px-2 py-1.5 text-xs font-semibold uppercase tracking-wider text-muted-foreground bg-muted/40 border-b border-border flex flex-nowrap items-center gap-0.5 shrink-0">
-        <span className="flex-1 min-w-0 truncate">{t('bmp.map')} · {band}</span>
+        {/* The band alone. "Map · 20M" spent a third of a narrow header saying
-        <button type="button" onClick={() => setZoomIdx((z) => Math.max(0, z - 1))} disabled={fitToBand || zoomIdx === 0}
+            what the panel obviously is, and with four band maps side by side it
+            was four times the same word. */}
+        <span className="flex-1 min-w-0 truncate">{band}</span>
+        <button type="button" onClick={() => changeZoom(-1)} disabled={fitToBand || zoomIdx === 0}
           className="size-5 shrink-0 inline-flex items-center justify-center rounded hover:bg-muted disabled:opacity-30"
           title={t('bmp.zoomOut')}>
           <Minus className="size-3" />
         </button>
-        <span className="shrink-0 font-mono text-[10px] normal-case tracking-normal whitespace-nowrap px-0.5">{fitToBand ? t('bmp.fit') : `${pxPerKHz}px/kHz`}</span>
+        {/* A readout, not a switch.
-        <button type="button" onClick={() => setZoomIdx((z) => Math.min(PX_PER_KHZ.length - 1, z + 1))} disabled={fitToBand || zoomIdx === PX_PER_KHZ.length - 1}
+            
+            It WAS the switch for a day: clicking the px/kHz value toggled
+            fit-to-band, and in fit it read "FIT". Nobody found it — a control
+            whose label is a measurement does not look like a control, and once
+            switched off there was no longer anything on screen saying the option
+            existed. The switches below say what they are. */}
+        {/* In fit mode the readout has nothing left to say — the lit FIT button
+            says it, and printing the word twice side by side is just noise. The
+            Band Map tab's cards have no button, so there the readout keeps
+            reporting both states. */}
+        {(!fitToBand || !onToggleFit) && (
+          <span className="shrink-0 font-mono text-[10px] normal-case tracking-normal whitespace-nowrap px-0.5">{fitToBand ? t('bmp.fit') : `${pxPerKHz}px/kHz`}</span>
+        )}
+        <button type="button" onClick={() => changeZoom(1)} disabled={fitToBand || zoomIdx === PX_PER_KHZ.length - 1}
           className="size-5 shrink-0 inline-flex items-center justify-center rounded hover:bg-muted disabled:opacity-30"
           title={t('bmp.zoomIn')}>
           <Plus className="size-3" />
         </button>
+        {onToggleFit && (
+          <button type="button" onClick={onToggleFit} title={t('bmp.fitTitle')}
+            className={cn('shrink-0 text-[10px] font-semibold normal-case tracking-normal px-1 rounded border transition-colors',
+              fitToBand ? 'border-primary bg-primary text-primary-foreground' : 'border-border text-muted-foreground hover:bg-muted')}>
+            {t('bmp.fit')}
+          </button>
+        )}
+        {onToggleHideDigital && (
+          <button type="button" onClick={onToggleHideDigital} title={t('bmp.hideFtTitle')}
+            className={cn('shrink-0 text-[10px] font-semibold normal-case tracking-normal px-1 rounded border transition-colors',
+              hideDigital ? 'border-primary bg-primary text-primary-foreground' : 'border-border text-muted-foreground hover:bg-muted')}>
+            {t('bmp.ftx')}
+          </button>
+        )}
         <button type="button" onClick={recenterOnRig}
           className="size-5 inline-flex items-center justify-center rounded hover:bg-muted"
           title={t('bmp.scrollToRig')}>
@@ -562,12 +737,32 @@ export function BandMap({ band, spots, spotStatus, currentFreqHz, onSpotClick, o
                   'hover:translate-x-0.5 hover:shadow',
                   style.pill,
                 )}
-                title={`${p.spot.dx_call}${entry?.country ? ' · ' + entry.country : ''} · ${p.spot.freq_khz.toFixed(1)} kHz · ${statusLabel(st, t)}${p.spot.comment ? ' · ' + p.spot.comment : ''}${p.spot.spotter ? ' · de ' + p.spot.spotter : ''}`}
+                title={`${p.spot.dx_call}${entry?.country ? ' · ' + entry.country : ''} · ${p.spot.freq_khz.toFixed(1)} kHz · ${statusLabel(st, t)}${markersFor(entry).map((m) => ' · ' + t(BMP_MARKER_LABEL[m.key])).join('')}${p.spot.comment ? ' · ' + p.spot.comment : ''}${p.spot.spotter ? ' · de ' + p.spot.spotter : ''}`}
               >
-                {/* Status accent strip on the left */}
+                {/* Left accent strip. With no extra marker it repeats the status
-                <span className={cn('w-1 shrink-0', style.bar)} aria-hidden />
+                    colour, exactly as before; otherwise it splits into one
+                    segment per marker, so "worked entity + new park" shows both
+                    instead of one hiding the other. */}
+                {(() => {
+                  const marks = markersFor(entry);
+                  if (marks.length === 0) return <span className={cn('w-1 shrink-0', style.bar)} aria-hidden />;
+                  return (
+                    <span className="w-1 shrink-0 flex flex-col" aria-hidden>
+                      {marks.map((m) => <span key={m.key} className="flex-1" style={{ background: m.colour }} />)}
+                    </span>
+                  );
+                })()}
                 <span className="flex items-center gap-1.5 px-2 font-mono text-[11px] font-bold leading-none">
                   <span>{p.spot.dx_call}</span>
+                  {/* Same badge the cluster list draws, for the same reason: the
+                      muted-blue of a confirmation, never a status colour —
+                      whether a station uploads to LoTW says nothing about
+                      whether the spot is worth chasing. A glyph rather than a
+                      colour also keeps it off the channel the statuses use. */}
+                  {showLotw && entry?.lotw && (
+                    <span title={t('clu.lotwBadge')} className="text-[9px] font-normal rounded px-1 py-px"
+                      style={{ background: 'color-mix(in srgb, var(--info) 22%, transparent)', color: 'var(--info)' }}>L</span>
+                  )}
                   {mode && (
                     <span className="text-[9px] font-normal text-current/70 bg-current/10 rounded px-1 py-px">
                       {mode}
@@ -585,6 +780,11 @@ export function BandMap({ band, spots, spotStatus, currentFreqHz, onSpotClick, o
         <LegendDot cls="bg-warning" label={t('bmp.legendNewBand')} />
         <LegendDot cls="bg-caution" label={t('bmp.legendNewSlot')} />
         <LegendDot cls="bg-muted-foreground/30" label={t("bmp.legendWorked")} />
+        {/* The stacked markers, straight from the shared table so the legend
+            cannot drift from what the pills actually draw. */}
+        {BMP_MARKERS.map((m) => (
+          <LegendDot key={m.key} colour={m.colour} label={t(BMP_MARKER_LABEL[m.key])} />
+        ))}
         {/* Sub-band shading, so the wash behind the pills is never colour-alone. */}
         <span className="mx-0.5 opacity-40">|</span>
         <LegendDot colour={SEG_CW} label={t("bmp.legendCW")} />

frontend/src/components/BandSlotGrid.tsx

@@ -1,7 +1,11 @@
-import { useMemo } from 'react';
+import { useEffect, useMemo, useState } from 'react';
-import { Star, Radio } from 'lucide-react';
+import { Star, Radio, Sunrise, Sunset, X, Loader2 } from 'lucide-react';
 import { Badge } from '@/components/ui/badge';
 import { cn } from '@/lib/utils';
+import { sunTimes } from '@/lib/sun';
+import { isQSLConfirmed } from '@/lib/qsl';
+import { useI18n } from '@/lib/i18n';
+import { BandSlotQSOs } from '../../wailsjs/go/main/App';
 import type { WorkedBeforeView } from '@/types';
 
 type WorkedBefore = WorkedBeforeView;
@@ -13,6 +17,16 @@ interface Props {
   currentMode: string;
   bands?: string[]; // operator's configured bands; falls back to DEFAULT_BANDS
   hasCall?: boolean; // a callsign is being entered — only then highlight the "current entry" cell
+  // DX station coordinates, for its sunrise/sunset. Optional: many spots resolve
+  // to an entity with no position at all, and the block simply does not appear.
+  lat?: number;
+  lon?: number;
+  // Set when the matrix is showing a QSO picked in the log grid rather than the
+  // entry form — labelled so the two can never be confused.
+  forCall?: string;
+  // Open the QSO editor for a contact — makes callsigns in the cell drill-down
+  // clickable. Threaded down from App.openEdit.
+  onEditQso?: (id: number) => void;
 }
 
 // Compact column label for a band tag: keep the classic V/U for 2m/70cm,
@@ -63,28 +77,33 @@ const STATUS_CLASSES: Record<string, string> = {
   dxcc_w: 'bg-mx-dx-work',
 };
 
-// Legend entries, in the same colour order as the cells. swatch = the
+// Legend entries, in the same colour order as the cells — and the same order and
-// background class (or a special ring marker for the current-entry cell).
+// i18n keys the Appearance panel's colour pickers use, so the two can never
+// disagree about which green is which. swatch = the background class (or a
+// special ring marker for the current-entry cell).
 const LEGEND: { swatch: string; ring?: boolean; label: string }[] = [
-  { swatch: 'bg-mx-call-conf', label: 'Call confirmed' },
+  { swatch: 'bg-mx-call-conf', label: 'mx.callConf' },
-  { swatch: 'bg-mx-call-work', label: 'Call worked' },
+  { swatch: 'bg-mx-call-work', label: 'mx.callWork' },
-  { swatch: 'bg-mx-dx-conf', label: 'Entity confirmed' },
+  { swatch: 'bg-mx-dx-conf', label: 'mx.dxConf' },
-  { swatch: 'bg-mx-dx-work', label: 'Entity worked' },
+  { swatch: 'bg-mx-dx-work', label: 'mx.dxWork' },
-  { swatch: 'bg-mx-none', label: 'Not worked' },
+  { swatch: 'bg-mx-none', label: 'mx.none' },
-  { swatch: 'bg-mx-none', ring: true, label: 'Current entry' },
+  { swatch: 'bg-mx-none', ring: true, label: 'mx.current' },
 ];
 
-function cellTitle(band: string, cls: string, status: string, current: boolean): string {
+function cellTitle(t: (k: string) => string, band: string, cls: string, status: string, current: boolean): string {
   const desc =
-    status === 'call_c' ? 'This callsign confirmed' :
+    status === 'call_c' ? t('mx.tipCallConf') :
-    status === 'call_w' ? 'This callsign worked (not confirmed)' :
+    status === 'call_w' ? t('mx.tipCallWork') :
-    status === 'dxcc_c' ? 'Entity confirmed (other callsign)' :
+    status === 'dxcc_c' ? t('mx.tipDxConf') :
-    status === 'dxcc_w' ? 'Entity worked (other callsign)' :
+    status === 'dxcc_w' ? t('mx.tipDxWork') :
-                          'Never worked';
+                          t('mx.tipNone');
-  return `${band} ${cls}: ${desc}${current ? ' — current entry' : ''}`;
+  return `${band} ${cls}: ${desc}${current ? ' — ' + t('mx.current') : ''}`;
 }
 
-export function BandSlotGrid({ wb, busy, currentBand, currentMode, bands, hasCall = true }: Props) {
+export function BandSlotGrid({ wb, busy, currentBand, currentMode, bands, hasCall = true, lat, lon, forCall, onEditQso }: Props) {
+  const { t } = useI18n();
+  // Cell drill-down: which band+class the operator clicked, or null.
+  const [slot, setSlot] = useState<{ band: string; cls: string } | null>(null);
   // Columns from the operator's configured bands (so the matrix shows only the
   // bands they actually use), falling back to the built-in default set.
   const cols = useMemo(
@@ -151,6 +170,44 @@ export function BandSlotGrid({ wb, busy, currentBand, currentMode, bands, hasCal
     </Badge>
   ) : null;
 
+  // Sunrise / sunset AT THE DX, in UTC. A glance tells you whether the path is
+  // about to open or close on their side, which is the reason to look at a DX
+  // station's grey line at all. Recomputed only when the position changes.
+  const sun = useMemo(
+    () => (lat == null || lon == null ? null : sunTimes(new Date(), lat, lon)),
+    [lat, lon],
+  );
+  // Stacked, not side by side. Laid out in a row this cost about 150 px of a
+  // header that has to hold the callsign, the badges and the band grid, and it
+  // was what pushed the whole row onto a second line. Two short times one above
+  // the other take a fraction of that and no extra height: the row is already
+  // taller than one line of text.
+  //
+  // "UTC" moves into the tooltip with them — the times are monospaced and always
+  // UTC everywhere in OpsLog, so the label was spending width to repeat a
+  // convention the operator already lives by.
+  const sunBlock = sun ? (
+    <div className="ml-auto flex flex-col items-end leading-tight text-xs shrink-0"
+      title="Sunrise / sunset at the DX station (UTC)">
+      {sun.polarDay ? (
+        <span className="font-semibold text-warning">midnight sun</span>
+      ) : sun.polarNight ? (
+        <span className="font-semibold text-info">polar night</span>
+      ) : (
+        <>
+          <span className="flex items-center gap-1">
+            <Sunrise className="size-3 text-warning" />
+            <span className="font-mono tabular-nums">{sun.rise || '—'}</span>
+          </span>
+          <span className="flex items-center gap-1">
+            <Sunset className="size-3 text-info" />
+            <span className="font-mono tabular-nums">{sun.set || '—'}</span>
+          </span>
+        </>
+      )}
+    </div>
+  ) : null;
+
   return (
     <section
       className={cn(
@@ -158,7 +215,7 @@ export function BandSlotGrid({ wb, busy, currentBand, currentMode, bands, hasCal
         newOne && 'bg-gradient-to-br from-warning-muted to-warning-muted rounded-lg',
       )}
     >
-      <div className="flex items-center gap-2 min-w-[220px]">
+      <div className="flex items-center gap-2 min-w-[220px] flex-1">
         {newOne ? (
           <>
             <Badge className="bg-warning text-warning-foreground gap-1 px-3 py-1 text-[11px]">
@@ -173,6 +230,14 @@ export function BandSlotGrid({ wb, busy, currentBand, currentMode, bands, hasCal
           </>
         ) : hasDxcc ? (
           <>
+            {/* Says WHOSE stats these are when they come from a row picked in
+                the log rather than from what's being typed. */}
+            {forCall && (
+              <Badge variant="outline" className="px-2 py-0.5 text-[10px] font-mono shrink-0"
+                title="Stats for the QSO selected in the log">
+                {forCall}
+              </Badge>
+            )}
             <Badge className="bg-primary text-primary-foreground px-3 py-1 text-xs normal-case font-semibold tracking-normal">
               {dxccName || `DXCC #${dxcc}`}
             </Badge>
@@ -207,6 +272,7 @@ export function BandSlotGrid({ wb, busy, currentBand, currentMode, bands, hasCal
             Type a callsign to see entity stats
           </span>
         )}
+        {sunBlock}
       </div>
 
       <div className="flex flex-col gap-2">
@@ -246,11 +312,15 @@ export function BandSlotGrid({ wb, busy, currentBand, currentMode, bands, hasCal
                   return (
                     <td
                       key={b.tag}
-                      title={cellTitle(b.tag, cls, st, isCurrent)}
+                      title={cellTitle(t, b.tag, cls, st, isCurrent) + (st ? ' — ' + t('mx.tipClick') : '')}
+                      onClick={st ? () => setSlot({ band: b.tag, cls }) : undefined}
                       className={cn(
                         'w-[28px] h-[24px] rounded transition-colors p-0',
                         st ? STATUS_CLASSES[st] : 'bg-mx-none',
-                        isCurrent && 'ring-2 ring-warning ring-inset',
+                        // Only a filled cell has anything to show — an empty one
+                        // stays inert rather than opening a "no QSOs" dialog.
+                        st && 'cursor-pointer hover:brightness-110',
+                        isCurrent && 'ring-2 ring-mx-cur ring-inset',
                       )}
                     />
                   );
@@ -269,14 +339,127 @@ export function BandSlotGrid({ wb, busy, currentBand, currentMode, bands, hasCal
               className={cn(
                 'inline-block size-3 rounded shrink-0',
                 l.swatch,
-                l.ring && 'ring-2 ring-warning ring-inset',
+                l.ring && 'ring-2 ring-mx-cur ring-inset',
               )}
             />
-            {l.label}
+            {t(l.label)}
           </span>
         ))}
       </div>
       </div>
+
+      {slot && (
+        <SlotQSOModal
+          call={wb?.callsign ?? ''}
+          dxcc={dxcc}
+          entity={dxccName}
+          band={slot.band}
+          cls={slot.cls}
+          onClose={() => setSlot(null)}
+          onEdit={onEditQso}
+        />
+      )}
     </section>
   );
 }
+
+// ── Cell drill-down ──────────────────────────────────────────────────────────
+// The contacts behind one band+class cell: this exact callsign AND anyone else
+// in the entity, because that is the pair of facts the cell's colour encodes.
+// The call's own QSOs are marked so the two never blur together.
+
+function SlotQSOModal({ call, dxcc, entity, band, cls, onClose, onEdit }: {
+  call: string; dxcc: number; entity: string; band: string; cls: string; onClose: () => void; onEdit?: (id: number) => void;
+}) {
+  const [rows, setRows] = useState<any[] | null>(null);
+  const [err, setErr] = useState('');
+
+  useEffect(() => {
+    let dead = false;
+    BandSlotQSOs(call, dxcc, band, cls)
+      .then((r: any) => { if (!dead) setRows((r ?? []) as any[]); })
+      .catch((e: any) => { if (!dead) { setErr(String(e?.message ?? e)); setRows([]); } });
+    return () => { dead = true; };
+  }, [call, dxcc, band, cls]);
+
+  useEffect(() => {
+    // Capture phase: the app's global ESC handler resets the entry form, and
+    // closing a dialog must not also wipe what the operator was typing.
+    function onKey(e: KeyboardEvent) {
+      if (e.key === 'Escape') { e.stopImmediatePropagation(); e.preventDefault(); onClose(); }
+    }
+    window.addEventListener('keydown', onKey, true);
+    return () => window.removeEventListener('keydown', onKey, true);
+  }, [onClose]);
+
+  return (
+    <div className="fixed inset-0 z-50 flex items-center justify-center bg-black/60 backdrop-blur-[2px] p-4" onClick={onClose}>
+      <div className="bg-card border border-border rounded-xl shadow-2xl w-[760px] max-w-full max-h-[72vh] flex flex-col overflow-hidden ring-1 ring-black/5"
+        onClick={(e) => e.stopPropagation()}>
+        <div className="flex items-center gap-2.5 px-4 py-2.5 border-b border-border bg-muted/30">
+          <span className="inline-flex items-center justify-center h-6 min-w-6 px-1.5 rounded-md bg-primary/15 text-primary text-[11px] font-bold shrink-0 tabular-nums">{band}</span>
+          <div className="min-w-0">
+            <div className="font-semibold text-sm leading-tight truncate">
+              {cls}{entity && <span className="text-muted-foreground font-normal"> · {entity}</span>}
+            </div>
+            {onEdit && <div className="text-[10px] text-muted-foreground leading-tight">Click a callsign to edit the QSO</div>}
+          </div>
+          <span className="ml-auto text-xs text-muted-foreground tabular-nums shrink-0">{rows ? `${rows.length} QSO${rows.length > 1 ? 's' : ''}` : ''}</span>
+          <button type="button" onClick={onClose} className="text-muted-foreground hover:text-foreground shrink-0 rounded p-0.5 hover:bg-muted transition-colors">
+            <X className="size-4" />
+          </button>
+        </div>
+        <div className="flex-1 overflow-auto">
+          {err && <p className="p-3 text-xs text-destructive">{err}</p>}
+          {!rows ? (
+            <p className="p-4 text-xs text-muted-foreground flex items-center gap-2">
+              <Loader2 className="size-3.5 animate-spin" /> Loading…
+            </p>
+          ) : rows.length === 0 ? (
+            <p className="p-4 text-xs text-muted-foreground italic">No QSOs.</p>
+          ) : (
+            <table className="w-full text-xs border-collapse">
+              <thead className="sticky top-0 z-10 bg-muted/80 backdrop-blur text-[10px] uppercase tracking-wider text-muted-foreground">
+                <tr>
+                  <th className="text-left font-medium px-3 py-1.5">Date UTC</th>
+                  <th className="text-left font-medium px-3 py-1.5">Callsign</th>
+                  <th className="text-left font-medium px-3 py-1.5">Mode</th>
+                  <th className="text-left font-medium px-3 py-1.5">Freq</th>
+                  <th className="text-left font-medium px-3 py-1.5">Name</th>
+                  <th className="text-center font-medium px-3 py-1.5">Cfm</th>
+                </tr>
+              </thead>
+              <tbody>
+                {rows.map((q, i) => {
+                  const cfm = isQSLConfirmed(q.lotw_rcvd) || isQSLConfirmed(q.eqsl_rcvd) || isQSLConfirmed(q.qsl_rcvd);
+                  const mine = q.callsign === call;
+                  return (
+                    <tr key={q.id ?? i} className="border-t border-border/40 even:bg-muted/[0.06] hover:bg-primary/[0.06] transition-colors">
+                      <td className="px-3 py-1.5 tabular-nums text-muted-foreground whitespace-nowrap">
+                        {String(q.qso_date ?? '').slice(0, 16).replace('T', ' ')}
+                      </td>
+                      <td className="px-3 py-1.5">
+                        {onEdit ? (
+                          <button type="button" onClick={() => { onEdit(q.id as number); onClose(); }} title="Edit this QSO"
+                            className={cn('font-mono cursor-pointer text-left hover:underline underline-offset-2', mine ? 'font-bold text-primary' : 'text-foreground hover:text-primary')}>
+                            {q.callsign}
+                          </button>
+                        ) : (
+                          <span className={cn('font-mono', mine && 'font-bold text-primary')}>{q.callsign}</span>
+                        )}
+                      </td>
+                      <td className="px-3 py-1.5">{q.mode}</td>
+                      <td className="px-3 py-1.5 tabular-nums text-muted-foreground">{q.freq_hz ? (q.freq_hz / 1e6).toFixed(3) : ''}</td>
+                      <td className="px-3 py-1.5 text-muted-foreground truncate max-w-[180px]">{q.name}</td>
+                      <td className="px-3 py-1.5 text-center">{cfm ? <span className="text-success">✓</span> : <span className="text-muted-foreground/30">·</span>}</td>
+                    </tr>
+                  );
+                })}
+              </tbody>
+            </table>
+          )}
+        </div>
+      </div>
+    </div>
+  );
+}

frontend/src/components/BulkEditModal.tsx

@@ -30,6 +30,8 @@ const FIELDS: FieldDef[] = [
   { id: 'qsl_rcvd',          label: 'bulk.fQslRcvd',         group: 'QSL / upload', kind: 'status' },
   { id: 'qsl_rcvd_date',     label: 'bulk.fQslRcvdDate',     group: 'QSL / upload', kind: 'date' },
   { id: 'qsl_via',           label: 'bulk.fQslVia',          group: 'QSL / upload', kind: 'text' },
+  { id: 'qsl_sent_via',      label: 'bulk.fQslSentVia',      group: 'QSL / upload', kind: 'text' },
+  { id: 'qsl_rcvd_via',      label: 'bulk.fQslRcvdVia',      group: 'QSL / upload', kind: 'text' },
   { id: 'lotw_sent',         label: 'bulk.fLotwSent',        group: 'QSL / upload', kind: 'status' },
   { id: 'lotw_sent_date',    label: 'bulk.fLotwSentDate',    group: 'QSL / upload', kind: 'date' },
   { id: 'lotw_rcvd',         label: 'bulk.fLotwRcvd',        group: 'QSL / upload', kind: 'status' },
@@ -91,6 +93,17 @@ const FIELDS: FieldDef[] = [
   { id: 'iota',     label: 'bulk.fIota',    group: 'Contacted station', kind: 'text', upper: true },
   { id: 'sig',      label: 'bulk.fSig',     group: 'Contacted station', kind: 'text' },
   { id: 'sig_info', label: 'bulk.fSigInfo', group: 'Contacted station', kind: 'text' },
+  // The contact itself — repair fields, not description fields. An import that
+  // mapped every QSO to SSB, or an ADIF with no MODE at all, is fixed here
+  // instead of one row at a time.
+  //
+  // Band is deliberately absent: it travels with the frequency below, because a
+  // band contradicting its own frequency is invalid ADIF and every export would
+  // carry the contradiction.
+  { id: 'mode',     label: 'bulk.fMode',    group: 'The contact', kind: 'text', upper: true },
+  { id: 'submode',  label: 'bulk.fSubmode', group: 'The contact', kind: 'text', upper: true },
+  { id: 'rst_sent', label: 'bulk.fRstSent', group: 'The contact', kind: 'text' },
+  { id: 'rst_rcvd', label: 'bulk.fRstRcvd', group: 'The contact', kind: 'text' },
   // Misc
   // Frequency (MHz) — sets freq_hz AND recomputes band. Main use: fixing a batch
   // logged on a stale/default frequency after CAT dropped.
@@ -110,7 +123,12 @@ const STATUS_VALUES: { v: string; label: string }[] = [
   { v: '_', label: 'bulk.statusBlank' },
 ];
 
-const GROUPS = ['QSL / upload', 'My station', 'Contacted station', 'Contest', 'Propagation', 'Misc'];
+// Derived from the fields themselves, in the order they are declared.
+//
+// This used to be a hand-written list, and a group added to FIELDS but not to it
+// simply never rendered — the fields existed, passed every check, and could not
+// be picked. Two lists that must agree, with nothing to make them.
+const GROUPS = [...new Set(FIELDS.map((f) => f.group))];
 // Maps the internal group key → its i18n label key.
 const GROUP_LABELS: Record<string, string> = {
   'QSL / upload': 'bulk.groupQsl',
@@ -119,6 +137,7 @@ const GROUP_LABELS: Record<string, string> = {
   'Contest': 'bulk.groupContest',
   'Propagation': 'bulk.groupPropagation',
   'Misc': 'bulk.groupMisc',
+  'The contact': 'bulk.groupContact',
 };
 
 type Props = {
@@ -177,7 +196,7 @@ export function BulkEditModal({ open, ids, onClose, onApplied }: Props) {
               <SelectContent>
                 {GROUPS.map((g) => (
                   <div key={g}>
-                    <div className="px-2 py-1 text-[10px] uppercase tracking-wider text-muted-foreground">{t(GROUP_LABELS[g])}</div>
+                    <div className="px-2 py-1 text-[10px] uppercase tracking-wider text-muted-foreground">{GROUP_LABELS[g] ? t(GROUP_LABELS[g]) : g}</div>
                     {FIELDS.filter((f) => f.group === g)
                       .map((f) => ({ f, txt: t(f.label) }))
                       .sort((a, b) => a.txt.localeCompare(b.txt))

frontend/src/components/CallHistoryPanel.tsx

@@ -1,6 +1,7 @@
 import { Star } from 'lucide-react';
 import { Badge } from '@/components/ui/badge';
 import { useI18n } from '@/lib/i18n';
+import { isQSLConfirmed } from '@/lib/qsl';
 import type { WorkedBeforeView } from '@/types';
 
 type WorkedBefore = WorkedBeforeView;
@@ -97,10 +98,10 @@ export function CallHistoryPanel({ wb, busy, currentCall }: Props) {
                     <td className="px-2 py-1 font-mono border-b border-border/40 whitespace-nowrap">{e.rst_sent ?? ''}</td>
                     <td className="px-2 py-1 font-mono border-b border-border/40 whitespace-nowrap">{e.rst_rcvd ?? ''}</td>
                     <td className="px-2 py-1 border-b border-border/40 whitespace-nowrap text-muted-foreground">
-                      {e.lotw_rcvd === 'Y' && (
+                      {isQSLConfirmed(e.lotw_rcvd) && (
                         <span className="inline-block w-[14px] h-[14px] rounded text-center leading-[14px] text-[9px] font-bold text-info-foreground bg-info mr-0.5" title={t('chp.lotwRcvd')}>L</span>
                       )}
-                      {e.qsl_rcvd === 'Y' && (
+                      {isQSLConfirmed(e.qsl_rcvd) && (
                         <span className="inline-block w-[14px] h-[14px] rounded text-center leading-[14px] text-[9px] font-bold text-success-foreground bg-success mr-0.5" title={t('chp.bureauRcvd')}>B</span>
                       )}
                     </td>

frontend/src/components/ChaseNewPanel.tsx

@@ -0,0 +1,218 @@
+// ChaseNewPanel — the stations PSK Reporter is hearing NEAR HERE that are new
+// against the log.
+//
+// A DX cluster tells you what somebody chose to spot. This tells you what is
+// actually being decoded in your own region, which is a different and often
+// larger set: nobody spots the FT8 caller running ten watts from a rare square.
+//
+// The one thing an operator has to know, and the reason for the line at the
+// bottom: PSK Reporter carries DIGITAL MODES ONLY. An empty panel means nothing
+// new is being decoded on FT8/FT4/JS8 near here — not that the band is dead.
+import { useEffect, useMemo, useState } from 'react';
+import { Radar, Loader2, X } from 'lucide-react';
+import { useI18n } from '@/lib/i18n';
+import { markerColour } from '@/lib/spotMarkers';
+import { cn } from '@/lib/utils';
+import { GetChaseNewSpots } from '../../wailsjs/go/main/App';
+
+export interface ChaseNewSpot {
+  call: string;
+  band: string;
+  mode: string;
+  freq_hz?: number;
+  grid?: string;
+  country?: string;
+  cont?: string;
+  dist_km?: number;
+  bearing?: number;
+  status?: string;
+  new_pfx?: boolean;
+  new_grid?: boolean;
+  lotw?: boolean;
+  at: string;
+}
+
+interface Props {
+  // Tuning the rig to a row is the whole point — a station heard on 14.074 is
+  // only useful if you can get there in one click.
+  onPick?: (s: ChaseNewSpot) => void;
+  onClose?: () => void;
+}
+
+// The categories, in priority order. A station can be several at once — a new
+// band AND a new prefix — but a row shows ONE, the first that matches here.
+//
+// The order is by what would make an operator leave what they are doing: a new
+// entity beats a new band on it, which beats a new mode, which beats a new slot;
+// a prefix or a square is worth knowing but never worth interrupting a QSO for.
+// Two badges on one line also made the list unreadable at a glance, which is the
+// only thing this panel is for.
+type Category = 'dxcc' | 'band' | 'mode' | 'slot' | 'pfx' | 'grid';
+
+const CATEGORIES: Array<{ key: Category; labelKey: string; colour: string }> = [
+  { key: 'dxcc', labelKey: 'clg2.newDxcc', colour: 'var(--danger)' },
+  { key: 'band', labelKey: 'clg2.newBand', colour: 'var(--danger)' },
+  { key: 'mode', labelKey: 'clg2.newMode', colour: 'var(--danger)' },
+  { key: 'slot', labelKey: 'clg2.newSlot', colour: 'var(--danger)' },
+  { key: 'pfx', labelKey: 'clg2.newPfx', colour: markerColour('new_pfx') },
+  { key: 'grid', labelKey: 'clg2.newGrid', colour: markerColour('new_grid') },
+];
+
+// categoryOf is the single thing a row says about a station.
+function categoryOf(s: ChaseNewSpot): Category | null {
+  switch (s.status) {
+    case 'new': return 'dxcc';
+    case 'new-band-mode': return 'band';
+    case 'new-band': return 'band';
+    case 'new-mode': return 'mode';
+    case 'new-slot': return 'slot';
+  }
+  if (s.new_pfx) return 'pfx';
+  if (s.new_grid) return 'grid';
+  return null;
+}
+
+const FILTER_KEY = 'opslog.chaseNewFilters';
+
+function loadFilters(): Set<Category> {
+  try {
+    const raw = localStorage.getItem(FILTER_KEY);
+    if (raw) {
+      const list = JSON.parse(raw) as Category[];
+      if (Array.isArray(list)) return new Set(list);
+    }
+  } catch { /* a corrupt preference is not worth a broken panel */ }
+  return new Set(CATEGORIES.map((c) => c.key));
+}
+
+export function ChaseNewPanel({ onPick, onClose }: Props) {
+  const { t } = useI18n();
+  const [spots, setSpots] = useState<ChaseNewSpot[]>([]);
+  const [loaded, setLoaded] = useState(false);
+  const [on, setOn] = useState<Set<Category>>(loadFilters);
+
+  // Polled rather than pushed: the feed can deliver several a second under an
+  // opening, and an event per row would be a redraw per row for a list nobody
+  // reads that fast.
+  useEffect(() => {
+    let alive = true;
+    const tick = async () => {
+      try {
+        const r = ((await GetChaseNewSpots()) ?? []) as ChaseNewSpot[];
+        if (alive) { setSpots(r); setLoaded(true); }
+      } catch { /* the feed may not be up yet */ }
+    };
+    tick();
+    const id = window.setInterval(tick, 5000);
+    return () => { alive = false; window.clearInterval(id); };
+  }, []);
+
+  function toggle(k: Category) {
+    setOn((prev) => {
+      const next = new Set(prev);
+      if (next.has(k)) next.delete(k); else next.add(k);
+      try { localStorage.setItem(FILTER_KEY, JSON.stringify([...next])); } catch { /* not worth failing over */ }
+      return next;
+    });
+  }
+
+  const shown = useMemo(() => {
+    return spots.filter((s) => {
+      const c = categoryOf(s);
+      return c !== null && on.has(c);
+    });
+  }, [spots, on]);
+
+  return (
+    <div className="flex h-full flex-col rounded-md border border-border bg-card overflow-hidden">
+      <div className="flex items-center gap-2 border-b border-border px-2 py-1.5">
+        <Radar className="size-3.5 shrink-0 text-primary" />
+        <span className="shrink-0 text-xs font-semibold">{t('chn.title')}</span>
+
+        {/* Filters, in the same order and colours as the badges they hide. */}
+        <div className="flex flex-1 flex-wrap items-center gap-1">
+          {CATEGORIES.map((c) => (
+            <button
+              key={c.key}
+              type="button"
+              onClick={() => toggle(c.key)}
+              title={t('chn.filterHint')}
+              className={cn(
+                'rounded border px-1 py-px text-[9px] font-bold uppercase tracking-wide transition-colors',
+                on.has(c.key) ? 'border-transparent' : 'border-border text-muted-foreground opacity-50',
+              )}
+              style={on.has(c.key) ? { color: c.colour, borderColor: c.colour } : undefined}
+            >
+              {t(c.labelKey).replace(/^(NEW|NOUV)\s+/i, '')}
+            </button>
+          ))}
+        </div>
+
+        <span className="shrink-0 text-[10px] text-muted-foreground">
+          {loaded ? t('chn.count', { n: shown.length }) : ''}
+        </span>
+        {onClose && (
+          <button
+            type="button"
+            onClick={onClose}
+            title={t('chn.close')}
+            className="shrink-0 rounded p-0.5 text-muted-foreground hover:bg-muted hover:text-foreground"
+          >
+            <X className="size-3.5" />
+          </button>
+        )}
+      </div>
+
+      <div className="flex-1 overflow-y-auto">
+        {!loaded ? (
+          <div className="flex items-center justify-center gap-2 p-3 text-[11px] text-muted-foreground">
+            <Loader2 className="size-3 animate-spin" /> {t('chn.loading')}
+          </div>
+        ) : shown.length === 0 ? (
+          <p className="p-3 text-[11px] text-muted-foreground leading-relaxed">
+            {spots.length === 0 ? t('chn.empty') : t('chn.allFiltered')}
+          </p>
+        ) : (
+          <div className="divide-y divide-border/60">
+            {shown.map((s, i) => {
+              const c = categoryOf(s);
+              const def = CATEGORIES.find((x) => x.key === c);
+              return (
+                <button
+                  key={`${s.call}-${s.band}-${s.mode}-${i}`}
+                  type="button"
+                  onClick={() => onPick?.(s)}
+                  className="flex w-full items-center gap-1.5 px-2 py-1 text-left text-[11px] hover:bg-accent/40"
+                  title={[
+                    s.country,
+                    s.grid,
+                    s.dist_km ? `${s.dist_km} km` : '',
+                    s.freq_hz ? `${(s.freq_hz / 1000).toFixed(1)} kHz` : '',
+                  ].filter(Boolean).join(' · ')}
+                >
+                  <span className="w-[84px] shrink-0 truncate font-mono font-bold">{s.call}</span>
+                  <span className="w-9 shrink-0 font-mono text-muted-foreground">{s.band}</span>
+                  <span className="w-10 shrink-0 truncate text-muted-foreground">{s.mode}</span>
+                  {/* No frequency column: clicking the row tunes the rig to it,
+                      so the number was a thing to read and never to use. It is
+                      still carried on the spot — the click is what needs it —
+                      and shows in the row's tooltip for anyone who wants it.
+                      The country takes the space it freed. */}
+                  <span className="min-w-0 flex-1 truncate text-muted-foreground">{s.country ?? ''}</span>
+                  {def && (
+                    <span className="shrink-0 text-[9px] font-bold" style={{ color: def.colour }}>
+                      {t(def.labelKey)}
+                    </span>
+                  )}
+                  {s.lotw && <span className="shrink-0 text-[9px] text-info" title="LoTW">L</span>}
+                </button>
+              );
+            })}
+          </div>
+        )}
+      </div>
+
+      <p className="border-t border-border px-2 py-1 text-[10px] text-muted-foreground">{t('chn.digitalOnly')}</p>
+    </div>
+  );
+}

frontend/src/components/ClusterGrid.tsx

@@ -12,6 +12,8 @@ import {
 import { Button } from '@/components/ui/button';
 import { Checkbox } from '@/components/ui/checkbox';
 import { cleanSpotter, inferSpotMode, spotStatusKey } from '@/lib/spot';
+import { markerColour } from '@/lib/spotMarkers';
+import { applySpotDisplay, readSpotDisplayOptions } from '@/lib/spotDisplay';
 import { loadLocal, loadRemote, saveState, seedLocal, whenGridPrefsReady } from '@/lib/gridPrefs';
 import { useI18n } from '@/lib/i18n';
 
@@ -51,8 +53,23 @@ export type SpotStatusEntry = {
   country?: string;
   continent?: string;
   worked_call?: boolean;
+  // worked_slot: this exact callsign already worked on THIS band and mode.
+  // Always slot-scoped, unlike worked_call which follows the "same slot" option.
+  worked_slot?: boolean;
   new_county?: boolean;
+  // The resolved US county and state, so the grid can SHOW them and not merely
+  // flag them. Filled from the offline ULS store, US callsigns only.
+  county?: string;
+  state?: string;
   new_pota?: boolean;
+  new_pfx?: boolean;
+  pfx?: string;
+  // lotw: the DX uploads to LoTW, per ARRL user list. Inert until downloaded.
+  lotw?: boolean;
+  spotter_continent?: string;
+  grid?: string;
+  new_grid?: boolean;
+  grid_state?: string;
 };
 
 type Props = {
@@ -94,55 +111,93 @@ type ColEntry = ColDef<ClusterSpot> & { group: string; label: string; defaultVis
 // statusFor resolves the precomputed spot status (new / new-band / new-slot /
 // worked-call) for an ag-Grid cell's row.
 function statusFor(p: any): SpotStatusEntry | undefined {
-  return p?.context?.spotStatus?.[
+  const s = p?.context?.spotStatus?.[
     spotStatusKey(p.data?.dx_call, p.data?.band ?? '', p.data?.comment ?? '', p.data?.freq_hz)
   ];
+  // One chokepoint: the colour, the badges and the Status text all read through
+  // here, so the two display options are applied once rather than in each
+  // renderer — and the band map applies the very same function.
+  return applySpotDisplay(s, readSpotDisplayOptions());
 }
 
-// statusBadge maps a resolved spot status to a short labelled badge for the
+// Spot status is shown on the CELL that carries the fact — filled background for
-// Status column, using the same colours as the per-cell fills (NEW DXCC =
+// a novelty, tinted text otherwise — never by a pill or a badge.
-// call cell, NEW BAND = band cell, NEW SLOT = mode cell). Returns null when
+//
-// there's nothing notable to show.
+// The pills were dropped and stay dropped: a rounded box has its own height and
-type Badge = { text: string; fg: string; bg: string; bd: string };
+// padding, so it sat off the row's baseline and the callsign inside it no longer
+// lined up with the plain callsigns above and below. A whole column of them read
+// as chrome rather than as data. Same reasoning — and the same semantic tokens —
+// as the Y/N/R QSL columns in lib/qslStatus.ts.
+//
+// Which cell is marked IS the message:
+//
+//   filled call → new DXCC    filled band → new band    filled mode → new mode
+//   filled pfx  → new prefix  filled POTA → new park    filled county → new county
+//   blue call   → already worked (not a novelty, so text only)
+const NEW = 'var(--warning)'; // yellow: something here is new
+const WKD = 'var(--info)';    // blue: this callsign is already in the log
 
-// tok builds a badge from a semantic status token (success/warning/caution/
+// FILLING the cell that carries the fact, rather than only tinting its text.
-// danger/info/neutral) so the colours adapt to every theme via CSS variables,
+//
-// instead of the hard-coded light-theme pastels that looked wrong in dark mode.
+// This is not a return to the pills that were dropped. A pill is a box INSIDE
-function tok(name: string, text: string): Badge {
+// the cell: it has its own height and padding, so it sat off the row baseline
-  if (name === 'neutral') return { text, fg: 'var(--muted-foreground)', bg: 'var(--muted)', bd: 'var(--border)' };
+// and the callsign inside it stopped lining up with the plain callsigns above
-  return { text, fg: `var(--${name}-muted-foreground)`, bg: `var(--${name}-muted)`, bd: `var(--${name}-border)` };
+// and below. A cell background has no geometry of its own — the text does not
-}
+// move by a single pixel — and it reads from across the room, which a tinted
+// glyph does not.
+//
+// Which cell is filled is still the whole message: filled Band means new band,
+// filled Pfx means new prefix, filled County means new county.
+//
+// The colours come from the same places they already came from — the semantic
+// status tokens and lib/spotMarkers — so a fact keeps one colour across the
+// grid, the band map and the filter chips. 22 % is the wash that survived both
+// themes: enough to see at a glance, not enough to fight the text on it.
+const fillStyle = (colour: string) => ({
+  background: `color-mix(in srgb, ${colour} 22%, transparent)`,
+  color: colour,
+  fontWeight: 700,
+});
 
-// cellChip wraps a Band/Mode cell value in a small rounded pill (same look as the
+// cellText renders a cell value in an optional colour. An empty value keeps the
-// Status badges) when the slot is notable, instead of flooding the whole cell with
+// muted dash the grid used before, so blank cells still read as "nothing here"
-// a heavy muted fill that turned into an ugly olive block on dark themes. `name` is
+// rather than as a gap.
-// null → plain text, no pill.
+function cellText(value: any, color: string | null): any {
-function cellChip(value: any, name: string | null): any {
   const txt = value === undefined || value === null || value === '' ? '' : String(value);
-  if (!name) return txt || <span style={{ color: 'var(--muted-foreground)', fontSize: 10 }}>—</span>;
+  if (!txt) return <span style={{ color: 'var(--muted-foreground)', fontSize: 10 }}>—</span>;
-  // Inherit the column's font size (no fixed 9px / height) so a pill around a
+  return <span style={color ? { color, fontWeight: 700 } : undefined}>{txt}</span>;
-  // callsign stays the same size as the plain callsigns next to it — just tinted
-  // and rounded, not shrunk.
-  return (
-    <span style={{
-      display: 'inline-flex', alignItems: 'center', lineHeight: 1.1,
-      backgroundColor: `var(--${name}-muted)`, color: `var(--${name}-muted-foreground)`,
-      border: `1px solid var(--${name}-border)`, fontWeight: 700,
-      padding: '1px 6px', borderRadius: 999, whiteSpace: 'nowrap',
-    }}>{txt}</span>
-  );
 }
 
-function statusBadge(t: TFn, s: SpotStatusEntry | undefined): Badge | null {
+// statusColor is the colour for a resolved status in the Status column. County,
+// POTA and prefix keep their own tokens: they are orthogonal to the band/mode/
+// DXCC story and an operator filters on them separately.
+function statusColor(s: SpotStatusEntry | undefined): string | null {
   switch (s?.status) {
-    case 'new':      return tok('danger',  t('clg2.newDxcc'));
+    case 'new':
-    case 'new-band': return tok('warning', t('clg2.newBand'));
+    case 'new-band-mode':
-    case 'new-mode': return tok('caution', t('clg2.newMode'));
+    case 'new-band':
-    case 'new-slot': return tok('caution', t('clg2.newSlot'));
+    case 'new-mode':
-    default:         return s?.worked_call ? tok('neutral', t('clg2.wkdCall')) : null;
+    case 'new-slot':
+    case 'new-call':
+      return NEW;
+    default:
+      return s?.worked_call ? WKD : null;
   }
 }
 
+// isDull reports a spot that "represents nothing" under the current worked/slot
+// rules: the entity/band/mode is already worked (status resolved, not new in any
+// dimension), the callsign itself isn't in the log, and there's no POTA / county
+// / prefix novelty. Such rows are dimmed so the eye skips them. Because the
+// status obeys the DX-cluster "same slot" option and the digital-mode grouping,
+// what counts as dull follows those settings automatically. Unresolved statuses
+// (still loading, or entity unknown) are NOT dimmed — that would flicker.
+function isDull(s: SpotStatusEntry | undefined): boolean {
+  if (!s || !s.status) return false;
+  if (s.status === 'new' || s.status === 'new-band-mode' || s.status === 'new-band' || s.status === 'new-mode' || s.status === 'new-slot' || s.status === 'new-call') return false;
+  return !(s.worked_call || s.new_pota || s.new_county || s.new_pfx || s.new_grid);
+}
+
 const makeColCatalog = (t: TFn): ColEntry[] => [
   {
     group: 'Spot', label: t('clg2.c.time'),  colId: 'time',
@@ -166,15 +221,27 @@ const makeColCatalog = (t: TFn): ColEntry[] => [
     headerName: t('clg2.c.call'), field: 'dx_call' as any, width: 120,
     defaultVisible: true,
     cellClass: 'font-mono',
-    // NEW DXCC → a danger pill around the call, consistent with the NEW BAND /
+    // NEW DXCC fills the call cell. Already worked only tints the text blue:
-    // NEW MODE pills (same look, same tokens). Worked-call stays blue bold text;
+    // 'worked' is not a novelty, and filling it would wash most of the rows.
-    // a plain spot inherits the theme's normal text colour so callsigns blend in
+    cellStyle: (p: any) => (statusFor(p)?.status === 'new' ? fillStyle('var(--danger)') : null) as any,
-    // with the rest of the row instead of always shouting a colour.
     cellRenderer: (p: any) => {
       const s = statusFor(p);
-      if (s?.status === 'new') return cellChip(p.value, 'danger');
+      const color = s?.status === 'new' ? null : s?.worked_call ? WKD : null;
-      const color = s?.worked_call ? 'var(--info)' : undefined;
+      return (
-      return <span style={{ color, fontWeight: 700 }}>{p.value ?? ''}</span>;
+        <span style={{ color: color ?? undefined, fontWeight: 700 }}>
+          {p.value ?? ''}
+          {/* A single letter rather than a word: the column is 120 px and holds a
+              callsign. It stays the muted-blue of a confirmation, never a status
+              colour — whether a station uploads to LoTW says nothing about
+              whether the spot is worth chasing. */}
+          {s?.lotw ? (
+            <span title={t('clu.lotwBadge')} style={{
+              marginLeft: 4, padding: '0 3px', borderRadius: 3, fontSize: 9, verticalAlign: 'middle',
+              background: 'color-mix(in srgb, var(--info) 22%, transparent)', color: 'var(--info)',
+            }}>L</span>
+          ) : null}
+        </span>
+      );
     },
     tooltipValueGetter: (p: any) => {
       const s = statusFor(p);
@@ -185,38 +252,60 @@ const makeColCatalog = (t: TFn): ColEntry[] => [
     group: 'Spot', label: t('clg2.c.status'), colId: 'status',
     headerName: t('clg2.c.status'), width: 120, sortable: true,
     defaultVisible: true,
-    // Spells out the slot status as a text badge so NEW SLOT (and the others)
+    // Spells the status out in words so NEW SLOT (and the others) is obvious at
-    // is obvious at the row level, not just a single coloured cell. NEW COUNTY
+    // the row level, not just a single coloured cell — NEW SLOT in particular
-    // and NEW POTA are orthogonal, so they stack as extra badges.
+    // colours no cell at all, since neither the band nor the mode is new on its
+    // own. NEW COUNTY and NEW POTA are orthogonal, so they stack after it.
     valueGetter: (p: any) => {
       const s = statusFor(p);
       const parts: string[] = [];
       if (s?.status === 'new') parts.push(t('clg2.newDxcc'));
+      else if (s?.status === 'new-band-mode') parts.push(t('clg2.newBandMode'));
       else if (s?.status === 'new-band') parts.push(t('clg2.newBand'));
       else if (s?.status === 'new-mode') parts.push(t('clg2.newMode'));
       else if (s?.status === 'new-slot') parts.push(t('clg2.newSlot'));
+      else if (s?.status === 'new-call') parts.push(t('clg2.newCall'));
       else if (s?.worked_call) parts.push(t('clg2.wkdCall'));
       if (s?.new_county) parts.push(t('clg2.newCounty'));
       if (s?.new_pota) parts.push(t('clg2.newPota'));
+      if (s?.new_pfx) parts.push(t('clg2.newPfx'));
+      if (s?.new_grid) parts.push(s.grid_state === 'unconf' ? t('clg2.newGridUnconf') : t('clg2.newGrid'));
       return parts.join(' ');
     },
     cellRenderer: (p: any) => {
       const s = statusFor(p);
-      const badges: Badge[] = [];
+      const parts: { text: string; color: string; dim?: boolean }[] = [];
-      const b = statusBadge(t, s);
+      const main = statusColor(s);
-      if (b) badges.push(b);
+      if (main) {
-      if (s?.new_county) badges.push(tok('info', t('clg2.newCounty')));
+        const label = s?.status === 'new' ? t('clg2.newDxcc')
-      if (s?.new_pota) badges.push(tok('success', t('clg2.newPota')));
+          : s?.status === 'new-band-mode' ? t('clg2.newBandMode')
-      if (badges.length === 0) return <span style={{ color: 'var(--muted-foreground)', fontSize: 10 }}>—</span>;
+          : s?.status === 'new-band' ? t('clg2.newBand')
+            : s?.status === 'new-mode' ? t('clg2.newMode')
+              : s?.status === 'new-slot' ? t('clg2.newSlot')
+                : s?.status === 'new-call' ? t('clg2.newCall')
+                : t('clg2.wkdCall');
+        parts.push({ text: label, color: main });
+      }
+      // Colours from lib/spotMarkers — shared with the band map so a marker is
+      // never one colour here and another there.
+      if (s?.new_county) parts.push({ text: t('clg2.newCounty'), color: markerColour('new_county') });
+      if (s?.new_pota) parts.push({ text: t('clg2.newPota'), color: markerColour('new_pota') });
+      if (s?.new_pfx) parts.push({ text: t('clg2.newPfx'), color: markerColour('new_pfx') });
+      // Worked-but-unconfirmed is a QSL to chase, not a QSO to make. Same hue
+      // held back, so it reads as "less" of the same thing rather than a
+      // different fact — and the label says which.
+      if (s?.new_grid) {
+        parts.push(s.grid_state === 'unconf'
+          ? { text: t('clg2.newGridUnconf'), color: markerColour('new_grid'), dim: true }
+          : { text: t('clg2.newGrid'), color: markerColour('new_grid') });
+      }
+      if (parts.length === 0) return <span style={{ color: 'var(--muted-foreground)', fontSize: 10 }}>—</span>;
       return (
-        <span style={{ display: 'flex', height: '100%', flexWrap: 'wrap', gap: 2, alignItems: 'center' }}>
+        <span style={{ whiteSpace: 'nowrap' }}>
-          {badges.map((bd, i) => (
+          {parts.map((pt, i) => (
-            <span key={i} style={{
+            <span key={i} style={{ color: pt.color, fontWeight: 700, opacity: pt.dim ? 0.5 : 1 }}>
-              display: 'inline-flex', alignItems: 'center', height: 15, lineHeight: 1,
+              {i > 0 ? ' · ' : ''}{pt.text}
-              backgroundColor: bd.bg, color: bd.fg, border: `1px solid ${bd.bd}`,
+            </span>
-              fontWeight: 700, fontSize: 9,
-              padding: '0 5px', borderRadius: 999, letterSpacing: 0.3, whiteSpace: 'nowrap',
-            }}>{bd.text}</span>
           ))}
         </span>
       );
@@ -224,8 +313,10 @@ const makeColCatalog = (t: TFn): ColEntry[] => [
     tooltipValueGetter: (p: any) => {
       const s = statusFor(p);
       if (s?.status === 'new') return t('clg2.tipNewDxcc', { country: s?.country ?? '' });
+      if (s?.status === 'new-band-mode') return t('clg2.tipNewBandMode');
       if (s?.status === 'new-band') return t('clg2.tipNewBand');
       if (s?.status === 'new-slot') return t('clg2.tipNewSlotBand');
+      if (s?.status === 'new-call') return t('clg2.tipNewCall');
       if (s?.worked_call) return t('clg2.tipWorkedCall');
       return undefined;
     },
@@ -234,7 +325,9 @@ const makeColCatalog = (t: TFn): ColEntry[] => [
     group: 'Spot', label: t('clg2.c.pota'), colId: 'pota',
     headerName: t('clg2.c.pota'), field: 'pota_ref' as any, width: 92, cellClass: 'font-mono',
     defaultVisible: true,
-    cellStyle: { color: 'var(--success)' },
+    cellStyle: (p: any) => (statusFor(p)?.new_pota
+      ? fillStyle(markerColour('new_pota'))
+      : { color: 'var(--success)' }) as any,
     tooltipValueGetter: (p: any) => (p.data?.pota_name ? t('clg2.tipPota', { name: p.data.pota_name }) : undefined),
   },
   {
@@ -249,9 +342,18 @@ const makeColCatalog = (t: TFn): ColEntry[] => [
     headerName: t('clg2.c.band'), field: 'band' as any, width: 75,
     defaultVisible: true,
     cellClass: 'font-mono',
-    // NEW BAND for this entity → small warning pill around the band text.
+    // NEW BAND for this entity → the band cell is filled. NEW BAND+MODE fills
-    cellRenderer: (p: any) => cellChip(p.value, statusFor(p)?.status === 'new-band' ? 'warning' : null),
+    // it too: the band really is new, and leaving it plain would say the
-    tooltipValueGetter: (p: any) => (statusFor(p)?.status === 'new-band' ? t('clg2.tipNewBand') : undefined),
+    // opposite of the status column beside it.
+    cellStyle: (p: any) => {
+      const st = statusFor(p)?.status;
+      return (st === 'new-band' || st === 'new-band-mode' ? fillStyle(NEW) : null) as any;
+    },
+    cellRenderer: (p: any) => cellText(p.value, null),
+    tooltipValueGetter: (p: any) => {
+      const st = statusFor(p)?.status;
+      return st === 'new-band-mode' ? t('clg2.tipNewBandMode') : st === 'new-band' ? t('clg2.tipNewBand') : undefined;
+    },
   },
   {
     group: 'Spot', label: t('clg2.c.mode'), colId: 'mode',
@@ -259,13 +361,18 @@ const makeColCatalog = (t: TFn): ColEntry[] => [
     defaultVisible: true,
     cellClass: 'font-mono',
     valueGetter: (p: any) => p.data ? inferSpotMode(p.data.comment ?? '', p.data.freq_hz) : '',
-    // Only NEW MODE pills the mode cell — there the mode itself is genuinely new
+    // NEW MODE and NEW BAND+MODE pill the mode cell — in both the mode itself is
-    // for the entity. NEW SLOT means band AND mode were each worked before (just
+    // genuinely new for the entity. NEW SLOT means band AND mode were each worked
-    // not together), so highlighting the mode cell would wrongly imply "CW is new";
+    // before (just not together), so highlighting the mode cell would wrongly
-    // that case is signalled by the Status badge alone.
+    // imply "CW is new"; that case is signalled by the Status badge alone.
-    cellRenderer: (p: any) => cellChip(p.value, statusFor(p)?.status === 'new-mode' ? 'caution' : null),
+    cellStyle: (p: any) => {
+      const st = statusFor(p)?.status;
+      return (st === 'new-mode' || st === 'new-band-mode' ? fillStyle('var(--caution)') : null) as any;
+    },
+    cellRenderer: (p: any) => cellText(p.value, null),
     tooltipValueGetter: (p: any) => {
       const st = statusFor(p)?.status;
+      if (st === 'new-band-mode') return t('clg2.tipNewBandMode');
       if (st === 'new-mode') return t('clg2.tipNewMode');
       if (st === 'new-slot') return t('clg2.tipNewSlot');
       return undefined;
@@ -275,7 +382,37 @@ const makeColCatalog = (t: TFn): ColEntry[] => [
     group: 'Spot', label: t('clg2.c.pfx'), colId: 'pfx',
     headerName: t('clg2.c.pfx'), width: 60, cellClass: 'font-mono',
     valueGetter: (p: any) => fmtPfx(p.data?.dx_call ?? ''),
-    cellStyle: { color: 'var(--muted-foreground)' },
+    // NEW PFX fills the prefix cell, in the prefix marker's own colour.
+    cellStyle: (p: any) => (statusFor(p)?.new_pfx
+      ? fillStyle(markerColour('new_pfx'))
+      : { color: 'var(--muted-foreground)' }) as any,
+    tooltipValueGetter: (p: any) => (statusFor(p)?.new_pfx ? t('clg2.tipNewPfx') : undefined),
+  },
+  {
+    group: 'Geo', label: t('clg2.c.grid'), colId: 'grid',
+    headerName: t('clg2.c.grid'), width: 70, cellClass: 'font-mono',
+    // Not on the spot: the square a station announced in a CQ that THIS receiver
+    // decoded over the WSJT-X link, so it is filled for the digital watering
+    // hole being monitored and empty everywhere else. A cluster line carries the
+    // spotter's grid at best, never the DX's.
+    valueGetter: (p: any) => statusFor(p)?.grid ?? '',
+    cellStyle: (p: any) => (statusFor(p)?.new_grid ? fillStyle(markerColour('new_grid')) : null) as any,
+    cellRenderer: (p: any) => cellText(p.value, null),
+    tooltipValueGetter: (p: any) => (statusFor(p)?.new_grid ? t('clg2.tipNewGrid') : undefined),
+  },
+  {
+    group: 'Geo', label: t('clg2.c.county'), colId: 'county',
+    headerName: t('clg2.c.county'), width: 130, cellClass: 'font-mono',
+    // Not on the spot: resolved per callsign from the offline ULS store, so it
+    // stays empty for non-US calls and until that database is downloaded.
+    valueGetter: (p: any) => {
+      const s = statusFor(p);
+      if (!s?.county) return '';
+      return s.state ? s.county + ', ' + s.state : s.county;
+    },
+    cellStyle: (p: any) => (statusFor(p)?.new_county ? fillStyle(markerColour('new_county')) : null) as any,
+    cellRenderer: (p: any) => cellText(p.value, null),
+    tooltipValueGetter: (p: any) => (statusFor(p)?.new_county ? t('clg2.tipNewCounty') : undefined),
   },
   {
     group: 'Geo', label: t('clg2.c.cqz'), colId: 'cqz',
@@ -396,6 +533,11 @@ export function ClusterGrid({ rows, spotStatus, onSpotClick }: Props) {
 
   const defaultColDef = useMemo<ColDef>(() => ({
     sortable: true, resizable: true, filter: true, suppressMovable: false,
+    // Dim "represents nothing" spots at the CELL level, via a class that
+    // refreshCells re-applies. Doing it with a row STYLE needed redrawRows() on
+    // every status update, which re-rendered the whole grid continuously and
+    // pegged the CPU on a busy cluster (the 0.23.6 slowdown).
+    cellClassRules: { 'opacity-40': (p: any) => isDull(statusFor(p)) },
   }), []);
 
   // Pass spotStatus through AG Grid's context so cell renderers can look up
@@ -405,12 +547,22 @@ export function ClusterGrid({ rows, spotStatus, onSpotClick }: Props) {
   const context = useMemo(() => ({ spotStatus }), [spotStatus]);
 
   // Spot statuses arrive asynchronously (~after the rows render). The Call/Band/
-  // Mode cellStyles depend on them but their cell VALUE doesn't change, so ag-grid
+  // Mode cellStyles and the dimmed "represents nothing" class depend on them but
-  // won't re-render those cells on its own — force a refresh so e.g. a worked call
+  // the cell VALUE doesn't change, so ag-grid won't re-render on its own — force a
-  // turns blue once its status loads.
+  // refresh so e.g. a worked call turns blue once its status loads.
+  //
+  // THROTTLED: under an RBN firehose spotStatus updates ~20×/second, and firing a
+  // full refreshCells that often is pure churn on a slow PC. Coalesce the bursts
+  // into one refresh every 200 ms (still imperceptible) instead of one per update.
+  const refreshPending = useRef<number | undefined>(undefined);
   useEffect(() => {
-    gridRef.current?.api?.refreshCells({ force: true });
+    if (refreshPending.current !== undefined) return; // a refresh is already queued
+    refreshPending.current = window.setTimeout(() => {
+      refreshPending.current = undefined;
+      gridRef.current?.api?.refreshCells({ force: true });
+    }, 200);
   }, [spotStatus]);
+  useEffect(() => () => { if (refreshPending.current !== undefined) window.clearTimeout(refreshPending.current); }, []);
 
   // Restore AFTER the profile scope is known — this grid has no key= remount to
   // save it from reading the wrong (unscoped) cache key at first paint.
@@ -510,6 +662,17 @@ export function ClusterGrid({ rows, spotStatus, onSpotClick }: Props) {
               {t('clg2.pickerDesc')}
             </DialogDescription>
           </DialogHeader>
+          {/* Whole-dialog controls. showAll/hideAll with no group already mean
+              "every column"; only the buttons were missing, so hiding the lot
+              took one click per group. */}
+          <div className="flex items-center gap-1 px-1 text-[11px] text-muted-foreground">
+            <span>{t('clg2.allGroups')}</span>
+            <button type="button" className="text-[11px] text-primary hover:underline px-1"
+              onClick={() => showAll()}>{t('clg2.all')}</button>
+            <span className="opacity-40">·</span>
+            <button type="button" className="text-[11px] text-muted-foreground hover:underline px-1"
+              onClick={() => hideAll()}>{t('clg2.none')}</button>
+          </div>
           <div className="max-h-[60vh] overflow-y-auto py-2">
             {GROUP_ORDER.map((group) => {
               const cols = COL_CATALOG.filter((c) => c.group === group);

frontend/src/components/DetailsPanel.tsx

@@ -1,5 +1,5 @@
 import { useEffect, useMemo, useState } from 'react';
-import { ComputeQSOAwardRefs } from '../../wailsjs/go/main/App';
+import { ComputeQSOAwardRefs, IsNewUSCounty } from '../../wailsjs/go/main/App';
 import { Input } from '@/components/ui/input';
 import { Label } from '@/components/ui/label';
 import { Checkbox } from '@/components/ui/checkbox';
@@ -42,6 +42,7 @@ export interface DetailsState {
   srx_string?: string;
   stx_string?: string;
   email: string;
+  web?: string;
   // Award references for the contacted station (set via the Awards tab picker).
   // Semicolon-delimited "AWARD@REF" entries, e.g. "POTA@FR-11553;IOTA@EU-064".
   // App.tsx maps these back to pota_ref/sota_ref/iota when saving the QSO.
@@ -53,6 +54,14 @@ interface Props {
   prefix: string;
   operatorGrid: string;   // station.my_grid — origin for bearing/distance
   remoteGrid: string;     // entry-strip Grid value — destination
+  // Entry-strip text fields. Live award detection matches on these too — a DARC
+  // DOK keys off QTH, not the address — and sending only the address meant such
+  // an award stayed silent until the QSO was logged.
+  qth?: string;
+  name?: string;
+  country?: string;
+  comment?: string;
+  note?: string;
   details: DetailsState;
   onChange: (patch: Partial<DetailsState>) => void;
   // Stats (F1) tab content: the worked-before matrix + optional QRZ image.
@@ -61,6 +70,14 @@ interface Props {
   band: string;
   mode: string;
   bands?: string[]; // configured bands for the worked-before matrix columns
+  // When the entry form is empty and a QSO is selected in the log grid, the
+  // Stats (F1) matrix shows THAT contact's entity instead of sitting blank.
+  // Only the matrix is redirected — every other tab still edits the live entry.
+  slotCall?: string;
+  slotBand?: string;
+  slotMode?: string;
+  slotWb?: any;
+  slotWbBusy?: boolean;
   imageUrl?: string;
   onOpenImage?: () => void;
   // Optional controlled active tab (so the app can switch it via keyboard).
@@ -69,6 +86,8 @@ interface Props {
   // When the WinKeyer is active, F1-F12 fire macros, so the tab shortcut is
   // shown as Ctrl+F1…F5 instead of F1…F5.
   keyerActive?: boolean;
+  // Open the QSO editor — makes callsigns clickable in the band-slot drill-down.
+  onEditQso?: (id: number) => void;
 }
 
 export type TabName = 'stats' | 'info' | 'awards' | 'my' | 'extended';
@@ -113,28 +132,57 @@ function numOrUndef(v: string): number | undefined {
   return isNaN(n) ? undefined : n;
 }
 
+// Column spans written out rather than built as `col-span-${n}`: Tailwind scans
+// for literal class names, so an interpolated one is never emitted.
+const SPAN_CLASS: Record<number, string> = {
+  1: '', 2: 'col-span-2', 3: 'col-span-3', 4: 'col-span-4', 5: 'col-span-5',
+  6: 'col-span-6', 7: 'col-span-7', 8: 'col-span-8', 9: 'col-span-9',
+  10: 'col-span-10', 11: 'col-span-11', 12: 'col-span-12',
+};
+
 // Compact field helper to keep the JSX dense.
-function Field({ label, span = 1, children }: { label: string; span?: 1 | 2 | 3 | 4 | 6; children: React.ReactNode }) {
+function Field({ label, span = 1, className, children }: { label: string; span?: number; className?: string; children: React.ReactNode }) {
   return (
-    <div className={cn('flex flex-col min-w-0', span === 2 && 'col-span-2', span === 3 && 'col-span-3', span === 4 && 'col-span-4', span === 6 && 'col-span-6')}>
+    <div className={cn('flex flex-col min-w-0', SPAN_CLASS[span], className)}>
       <Label className="mb-1">{label}</Label>
       {children}
     </div>
   );
 }
 
-export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, details, onChange, wb, wbBusy, band, mode, bands, tab, onTab, keyerActive }: Props) {
+export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, qth, name, country, comment, note, details, onChange, wb, wbBusy, band, mode, bands, slotCall, slotBand, slotMode, slotWb, slotWbBusy, tab, onTab, keyerActive, onEditQso }: Props) {
   const { t } = useI18n();
   const [internalOpen, setInternalOpen] = useState<TabName>('stats');
   const open = tab ?? internalOpen; // controlled when `tab` is provided
 
   // Live award detection: run the SAME engine used at log time over the current
-  // contact (callsign + looked-up address/state/zones) so award references the
+  // contact — callsign, the looked-up address/state/zones AND the entry-strip
-  // QSO will earn — e.g. WAPC matching "Beijing" inside the address — are
+  // text (QTH, name, country, comment, note, grid). Sending only the address was
-  // surfaced and auto-added the moment you enter a call or click a spot, instead
+  // a silent hole: a DARC DOK matches on QTH, so "Aachen" produced nothing here
-  // of only appearing after logging. Pickable matches are merged into award_refs
+  // while the award editor's Test tab, which passes the whole QSO, matched it.
+  // References the QSO will earn — WAPC matching "Beijing" inside the address,
+  // a DOK matching the town — are surfaced and auto-added the moment you enter a
+  // call or click a spot, instead of only appearing after logging. Pickable
+  // matches are merged into award_refs
   // (idempotent; award_refs is NOT a dependency, so removing one by hand sticks).
-  const [detected, setDetected] = useState<Array<{ code: string; ref: string; name?: string; pickable?: boolean }>>([]);
+  const [detected, setDetected] = useState<Array<{ code: string; ref: string; name?: string; pickable?: boolean; ambiguous?: boolean }>>([]);
+
+  // NEW badge on the county: the same question the cluster's NEW CTY badge
+  // answers, for the station being worked right now. Debounced because the
+  // county field is typed into as well as filled by the lookup.
+  const [newCounty, setNewCounty] = useState(false);
+  useEffect(() => {
+    const cnty = (details.cnty ?? '').trim();
+    if (!cnty) { setNewCounty(false); return; }
+    let alive = true;
+    const id = window.setTimeout(async () => {
+      try {
+        const isNew = await IsNewUSCounty(details.state ?? '', cnty);
+        if (alive) setNewCounty(!!isNew);
+      } catch { if (alive) setNewCounty(false); }
+    }, 300);
+    return () => { alive = false; window.clearTimeout(id); };
+  }, [details.state, details.cnty]);
   useEffect(() => {
     if (open !== 'awards' || !callsign.trim()) { setDetected([]); return; }
     const t = window.setTimeout(async () => {
@@ -142,6 +190,8 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
         const q: any = {
           callsign, band, mode,
           address: details.address ?? '', state: details.state ?? '', cnty: details.cnty ?? '',
+          qth: qth ?? '', name: name ?? '', country: country ?? '',
+          comment: comment ?? '', notes: note ?? '', grid: remoteGrid ?? '',
           cont: details.cont ?? '', dxcc: details.dxcc, cqz: details.cqz, ituz: details.ituz,
           qso_date: new Date().toISOString(),
         };
@@ -151,7 +201,9 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
         const have = new Set(cur.split(';').filter(Boolean));
         let next = cur;
         for (const r of all) {
-          if (!r.pickable) continue;
+          // An ambiguous candidate is offered, never auto-added: adding one would
+          // be the guess the award's "one reference per QSO" setting exists to refuse.
+          if (!r.pickable || r.ambiguous) continue;
           const entry = `${String(r.code).toUpperCase()}@${String(r.ref).toUpperCase()}`;
           if (!have.has(entry)) { next = next ? `${next};${entry}` : entry; have.add(entry); }
         }
@@ -160,7 +212,7 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
     }, 400);
     return () => window.clearTimeout(t);
     // eslint-disable-next-line react-hooks/exhaustive-deps
-  }, [open, callsign, details.address, details.state, details.cnty, details.dxcc, details.cqz, details.ituz, band, mode]);
+  }, [open, callsign, details.address, details.state, details.cnty, details.dxcc, details.cqz, details.ituz, qth, name, country, comment, note, remoteGrid, band, mode]);
   // Bearing/distance from operator's home grid to the remote station.
   // Recomputed only when either grid actually changes.
   const path = useMemo(() => {
@@ -174,6 +226,15 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
     }
     return null;
   }, [operatorGrid, remoteGrid, details.lat, details.lon]);
+  // Where the DX actually is, for its sunrise/sunset. The locator wins when we
+  // have one — it is what the operator can see and check — and the provider's
+  // raw coordinates cover entities that resolve through cty.dat with no grid.
+  const dxLL = useMemo(() => {
+    const byGrid = gridToLatLon(remoteGrid);
+    if (byGrid) return byGrid;
+    if (details.lat != null && details.lon != null) return { lat: details.lat, lon: details.lon };
+    return null;
+  }, [remoteGrid, details.lat, details.lon]);
   const fmtDeg = (n: number) => `${Math.round(n)}°`;
   const fmtKm = (n: number) => `${Math.round(n).toLocaleString()} km`;
 
@@ -222,19 +283,40 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
       <div className={cn('flex-1 min-h-0', open === 'stats' ? 'overflow-hidden' : 'overflow-y-auto')}>
       {open === 'stats' && (
         <div className="px-3 py-2.5">
-          <BandSlotGrid wb={wb} busy={!!wbBusy} currentBand={band} currentMode={mode} bands={bands} hasCall={callsign.trim() !== ''} />
+          <BandSlotGrid
+            wb={slotCall ? slotWb : wb}
+            busy={slotCall ? !!slotWbBusy : !!wbBusy}
+            currentBand={slotCall ? (slotBand ?? '') : band}
+            currentMode={slotCall ? (slotMode ?? '') : mode}
+            bands={bands}
+            hasCall={slotCall ? true : callsign.trim() !== ''}
+            forCall={slotCall}
+            onEditQso={onEditQso}
+            lat={dxLL?.lat} lon={dxLL?.lon} />
         </div>
       )}
 
       {open === 'info' && (
-        <div className="grid grid-cols-6 gap-2 px-3 py-2.5">
+        <div className="grid grid-cols-12 gap-2 px-3 py-2.5">
-          <Field label={t('detp.statePref')}>
+          {/* Twelve columns, not six: the fields hold very different things. A US
+              county name is long, a CQ zone is two digits — on an even six-column
+              grid they were the same width, so the county truncated while the
+              zones sat mostly empty. */}
+          <Field label={t('detp.statePref')} span={2}>
             <Input value={details.state} onChange={(e) => onChange({ state: e.target.value })} />
           </Field>
-          <Field label={t('detp.county')}>
+          <Field label={t('detp.county')} span={4} className="relative">
-            <Input value={details.cnty} onChange={(e) => onChange({ cnty: e.target.value })} />
+            <Input value={details.cnty} onChange={(e) => onChange({ cnty: e.target.value })} className={cn(newCounty && 'pr-14')} />
+            {newCounty && (
+              <span
+                title={t('detp.newCountyTip')}
+                className="absolute right-1.5 bottom-1.5 rounded px-1.5 py-0.5 text-[10px] font-bold tracking-wide bg-success text-success-foreground pointer-events-none"
+              >
+                {t('detp.newCounty')}
+              </span>
+            )}
           </Field>
-          <Field label={t('detp.prefix')}>
+          <Field label={t('detp.prefix')} span={2}>
             <Input className="font-mono uppercase" value={prefix} readOnly tabIndex={-1} />
           </Field>
           <Field label={t('detp.cqZone')}>
@@ -248,7 +330,7 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
           {/* DXCC # closes the top row (next to the zones); Continent and
               Azimuth SP live in the main entry strip / bandeau. The long-path
               bearing and distances move to the row below. */}
-          <Field label={t('detp.dxcc')}>
+          <Field label={t('detp.dxcc')} span={2}>
             <Input
               readOnly
               tabIndex={-1}
@@ -257,42 +339,51 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
               placeholder="—"
             />
           </Field>
-          <Field label={t('detp.azimuthLp')}>
+          {/* The bearing and the two distances are read-only and hold at most
-            <Input
+              "12345 km", so they take a fixed width and the address — the one
-              readOnly
+              field here that is never wide enough — gets everything left over. */}
-              tabIndex={-1}
+          <div className="col-span-12 flex gap-2">
-              className="font-mono bg-muted/40 cursor-default"
+            <Field label={t('detp.azimuthLp')} className="w-20 shrink-0">
-              value={path ? fmtDeg(path.bearingLong) : ''}
+              <Input
-              placeholder="—"
+                readOnly
-            />
+                tabIndex={-1}
-          </Field>
+                className="font-mono bg-muted/40 cursor-default"
-          <Field label={t('detp.distanceSp')}>
+                value={path ? fmtDeg(path.bearingLong) : ''}
-            <Input
+                placeholder="—"
-              readOnly
+              />
-              tabIndex={-1}
+            </Field>
-              className="font-mono bg-muted/40 cursor-default"
+            <Field label={t('detp.distanceSp')} className="w-24 shrink-0">
-              value={path ? fmtKm(path.distanceShort) : ''}
+              <Input
-              placeholder="—"
+                readOnly
-            />
+                tabIndex={-1}
-          </Field>
+                className="font-mono bg-muted/40 cursor-default"
-          <Field label={t('detp.distanceLp')}>
+                value={path ? fmtKm(path.distanceShort) : ''}
-            <Input
+                placeholder="—"
-              readOnly
+              />
-              tabIndex={-1}
+            </Field>
-              className="font-mono bg-muted/40 cursor-default"
+            <Field label={t('detp.distanceLp')} className="w-24 shrink-0">
-              value={path ? fmtKm(path.distanceLong) : ''}
+              <Input
-              placeholder="—"
+                readOnly
-            />
+                tabIndex={-1}
-          </Field>
+                className="font-mono bg-muted/40 cursor-default"
-          <Field label={t('detp.address')} span={3}>
+                value={path ? fmtKm(path.distanceLong) : ''}
-            <Input value={details.address} onChange={(e) => onChange({ address: e.target.value })} />
+                placeholder="—"
-          </Field>
+              />
-          <Field label={t('detp.qslMessage')} span={3}>
+            </Field>
-            <Input value={details.qsl_msg} onChange={(e) => onChange({ qsl_msg: e.target.value })} />
+            <Field label={t('detp.address')} className="flex-1 min-w-0">
-          </Field>
+              <Input value={details.address} onChange={(e) => onChange({ address: e.target.value })} />
-          <Field label={t('detp.qslVia')} span={2}>
+            </Field>
+          </div>
+          {/* QSL via gets the room, not the message. Width should follow use, and
+              these two are nowhere near equal: a manager's callsign is filled in
+              constantly and a QSL message almost never. The message had 7 columns
+              of 12 for text most operators never type. */}
+          <Field label={t('detp.qslVia')} span={7}>
             <Input value={details.qsl_via} onChange={(e) => onChange({ qsl_via: e.target.value })} />
           </Field>
+          <Field label={t('detp.qslMessage')} span={5}>
+            <Input value={details.qsl_msg} onChange={(e) => onChange({ qsl_msg: e.target.value })} />
+          </Field>
         </div>
       )}
 
@@ -305,10 +396,37 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
             fieldValues={{ state: details.state ?? '', cnty: details.cnty ?? '' }}
             heightClass="flex-1 min-h-0"
           />
-          {detected.length > 0 && (
+          {/* Ambiguous candidates: the award allows one reference per QSO and
+              several matched, so none was kept. Click one to settle it while the
+              contact is still in front of you. */}
+          {detected.some((r) => r.ambiguous) && (
+            <div className="mt-2 text-[11px] shrink-0 leading-snug border-t border-warning/40 pt-1.5">
+              <span className="font-medium text-warning">{t('detp.ambiguous')}</span>{' '}
+              {detected.filter((r) => r.ambiguous).map((r) => (
+                <button
+                  key={`amb-${r.code}@${r.ref}`}
+                  type="button"
+                  title={r.name ?? ''}
+                  onClick={() => {
+                    const entry = `${r.code.toUpperCase()}@${r.ref.toUpperCase()}`;
+                    const cur = details.award_refs ?? '';
+                    // Only one of the candidates can be right — replace any
+                    // sibling already picked for this award rather than stacking.
+                    const kept = cur.split(';').filter((e) => e && e.split('@')[0].toUpperCase() !== r.code.toUpperCase());
+                    onChange({ award_refs: [...kept, entry].join(';') });
+                    setDetected((d) => d.filter((x) => !x.ambiguous || x.code.toUpperCase() !== r.code.toUpperCase()));
+                  }}
+                  className="inline-block mr-1.5 px-1.5 py-0.5 rounded font-mono whitespace-nowrap border border-warning/50 text-warning hover:bg-warning/10"
+                >
+                  {r.code}@{r.ref}{r.name ? ` — ${r.name}` : ''}
+                </button>
+              ))}
+            </div>
+          )}
+          {detected.some((r) => !r.ambiguous) && (
             <div className="mt-2 text-[11px] text-muted-foreground shrink-0 max-h-14 overflow-y-auto leading-snug border-t border-border/50 pt-1.5">
               <span className="font-medium text-foreground/70">{t('detp.detected')}</span>{' '}
-              {detected.map((r) => (
+              {detected.filter((r) => !r.ambiguous).map((r) => (
                 <span key={`${r.code}@${r.ref}`} className="inline-block mr-1.5 font-mono whitespace-nowrap" title={r.name ?? ''}>
                   <span className="text-foreground/80">{r.code}{r.ref ? `@${r.ref}` : ''}</span>
                 </span>
@@ -352,18 +470,18 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
             </Select>
           </Field>
           <Field label={t('detp.rig')} span={3}>
-            <Input value={details.my_rig} placeholder="Flex 8600" onChange={(e) => onChange({ my_rig: e.target.value })} />
+            <Input value={details.my_rig} onChange={(e) => onChange({ my_rig: e.target.value })} />
           </Field>
           <Field label={t('detp.antenna')} span={3}>
-            <Input value={details.my_antenna} placeholder="UB640" onChange={(e) => onChange({ my_antenna: e.target.value })} />
+            <Input value={details.my_antenna} onChange={(e) => onChange({ my_antenna: e.target.value })} />
           </Field>
           {satelliteMode && (
             <>
               <Field label={t('detp.satName')} span={3}>
-                <Input value={details.sat_name} placeholder="AO-91" onChange={(e) => onChange({ sat_name: e.target.value })} />
+                <Input value={details.sat_name} onChange={(e) => onChange({ sat_name: e.target.value })} />
               </Field>
               <Field label={t('detp.satelliteMode')} span={3}>
-                <Input value={details.sat_mode} placeholder="U/V" onChange={(e) => onChange({ sat_mode: e.target.value })} />
+                <Input value={details.sat_mode} onChange={(e) => onChange({ sat_mode: e.target.value })} />
               </Field>
             </>
           )}
@@ -381,8 +499,14 @@ export function DetailsPanel({ callsign, prefix, operatorGrid, remoteGrid, detai
           <Field label="STX">
             <Input value={details.stx_string ?? ''} placeholder={t('detp.sentExchangePh')} onChange={(e) => onChange({ stx_string: e.target.value })} />
           </Field>
-          <Field label={t('detp.contactedEmail')} span={3}>
+          {/* No placeholder: a greyed-out sample address in an empty field reads
-            <Input value={details.email} placeholder="[email protected]" onChange={(e) => onChange({ email: e.target.value })} />
+              as a value the lookup found, and that is exactly the field an
+              operator checks to see whether it found one. */}
+          <Field label={t('detp.contactedEmail')} span={2}>
+            <Input value={details.email} onChange={(e) => onChange({ email: e.target.value })} />
+          </Field>
+          <Field label={t('detp.contactedWeb')}>
+            <Input value={details.web ?? ''} onChange={(e) => onChange({ web: e.target.value })} />
           </Field>
         </div>
       )}

frontend/src/components/ExportFieldsDialog.tsx

@@ -86,6 +86,13 @@ export function ExportFieldsDialog({ open, count, onExport, onClose }: {
     return [...m.entries()];
   }, [official]);
 
+  // Every tag the dialog can offer — the extras AND every group — so "select
+  // all" means what it says rather than "all the official ones".
+  const everyTag = useMemo(
+    () => [...extras, ...groups.flatMap(([, list]) => list.map((d) => d.name))],
+    [extras, groups],
+  );
+
   const toggle = (name: string, on: boolean) =>
     setSel((s) => { const n = new Set(s); if (on) n.add(name); else n.delete(name); return n; });
   const setMany = (names: string[], on: boolean) =>
@@ -114,11 +121,25 @@ export function ExportFieldsDialog({ open, count, onExport, onClose }: {
           <DialogDescription>{t('exf.desc')}</DialogDescription>
         </DialogHeader>
 
+        {/* Whole-dialog select/clear, next to the count they change. Per-group
+            links alone meant clearing the selection was one click PER GROUP —
+            a dozen of them to get to "just the handful I want". */}
         <div className="flex items-center gap-2 px-1 text-[11px] text-muted-foreground">
           <span>{t('exf.chosen', { n: sel.size })}</span>
-          <Button variant="ghost" size="sm" className="ml-auto h-6 text-[11px]" onClick={() => setSel(defaultSet(official))}>
+          <span className="ml-auto inline-flex items-center gap-1">
-            {t('exf.defaults')}
+            <Button variant="ghost" size="sm" className="h-6 text-[11px]"
-          </Button>
+              onClick={() => setSel(new Set(everyTag))}>
+              {t('exf.selectAll')}
+            </Button>
+            <Button variant="ghost" size="sm" className="h-6 text-[11px]"
+              disabled={sel.size === 0}
+              onClick={() => setSel(new Set())}>
+              {t('exf.selectNone')}
+            </Button>
+            <Button variant="ghost" size="sm" className="h-6 text-[11px]" onClick={() => setSel(defaultSet(official))}>
+              {t('exf.defaults')}
+            </Button>
+          </span>
         </div>
 
         <div className="grid grid-cols-3 gap-3 max-h-[56vh] overflow-y-auto pr-1">

frontend/src/components/FilterBuilder.tsx

@@ -1,4 +1,4 @@
-import { useEffect, useMemo, useState } from 'react';
+import { useEffect, useMemo, useRef, useState } from 'react';
 import { Plus, Trash2, Save, FolderOpen, X } from 'lucide-react';
 import { writeUiPref } from '@/lib/uiPref';
 import { Dialog, DialogContent, DialogHeader, DialogTitle, DialogFooter } from '@/components/ui/dialog';
@@ -13,7 +13,8 @@ import { useI18n } from '@/lib/i18n';
 
 export type FilterOp =
   | 'eq' | 'ne' | 'gt' | 'lt' | 'ge' | 'le'
-  | 'contains' | 'startswith' | 'endswith' | 'empty' | 'notempty';
+  | 'contains' | 'startswith' | 'endswith' | 'empty' | 'notempty'
+  | 'in' | 'notin';
 
 export interface FilterCondition { field: string; op: FilterOp; value: string }
 export interface QueryFilter {
@@ -67,6 +68,8 @@ const FIELDS: { value: string; label: string; type: FieldType }[] = [
   { value: 'qsl_rcvd', label: 'fltb.fQslRcvd', type: 'text' },
   { value: 'qsl_rcvd_date', label: 'fltb.fQslRcvdDate', type: 'adifdate' },
   { value: 'qsl_via', label: 'fltb.fQslVia', type: 'text' },
+  { value: 'qsl_sent_via', label: 'fltb.fQslSentVia', type: 'text' },
+  { value: 'qsl_rcvd_via', label: 'fltb.fQslRcvdVia', type: 'text' },
   { value: 'lotw_sent', label: 'fltb.fLotwSent', type: 'text' },
   { value: 'lotw_sent_date', label: 'fltb.fLotwSentDate', type: 'adifdate' },
   { value: 'lotw_rcvd', label: 'fltb.fLotwRcvd', type: 'text' },
@@ -121,9 +124,15 @@ const OPS: { value: FilterOp; label: string }[] = [
   { value: 'le', label: 'fltb.opLe' },
   { value: 'empty', label: 'fltb.opEmpty' },
   { value: 'notempty', label: 'fltb.opNotEmpty' },
+  // 'in' is what makes a real question askable. Every condition is joined by ONE
+  // AND or OR, so "2 m or 70 cm, in FT8, since January" had no expression: AND
+  // killed the two bands, OR let every FT8 QSO through. The OR lives inside the
+  // condition instead, and the rest keeps ANDing.
+  { value: 'in', label: 'fltb.opIn' },
+  { value: 'notin', label: 'fltb.opNotIn' },
 ];
 
-const TEXT_OPS: FilterOp[] = ['contains', 'startswith', 'endswith', 'eq', 'ne', 'empty', 'notempty'];
+const TEXT_OPS: FilterOp[] = ['contains', 'startswith', 'endswith', 'eq', 'ne', 'in', 'notin', 'empty', 'notempty'];
 const NUM_OPS: FilterOp[] = ['eq', 'ne', 'gt', 'lt', 'ge', 'le', 'empty', 'notempty'];
 
 function opsFor(field: string): { value: FilterOp; label: string }[] {
@@ -183,6 +192,17 @@ export function FilterBuilder({ open, initial, onApply, onClose }: Props) {
 
   function apply() { onApply(buildFilter()); }
 
+  // Same silence as the alert rules: the preset landed in the list, but the list
+  // is not where the operator is looking when they press Save.
+  const [savedMsg, setSavedMsg] = useState('');
+  const savedTimer = useRef(0);
+  function flashSaved(text: string) {
+    setSavedMsg(text);
+    window.clearTimeout(savedTimer.current);
+    savedTimer.current = window.setTimeout(() => setSavedMsg(''), 3000);
+  }
+  useEffect(() => () => window.clearTimeout(savedTimer.current), []);
+
   function saveCurrentPreset() {
     const name = presetName.trim();
     if (!name) return;
@@ -190,6 +210,7 @@ export function FilterBuilder({ open, initial, onApply, onClose }: Props) {
     savePresets(next);
     setPresets(next);
     setPresetName('');
+    flashSaved(t('fltb.presetSaved', { name }));
   }
   function loadPreset(name: string) {
     const f = presets[name];
@@ -234,7 +255,14 @@ export function FilterBuilder({ open, initial, onApply, onClose }: Props) {
                   <SelectItem key={n} value={n}>
                     <span className="inline-flex items-center gap-2">
                       {n}
-                      <Trash2 className="size-3 text-muted-foreground hover:text-destructive" onClick={(e) => { e.stopPropagation(); deletePreset(n); }} />
+                      {/* Radix SelectItem selects on pointer-up, so an onClick here
+                          fires too late — the menu has already loaded the preset and
+                          closed. Intercept pointer-down (preventDefault stops Radix
+                          claiming it) and delete there instead. */}
+                      <Trash2
+                        className="size-3 text-muted-foreground hover:text-destructive"
+                        onPointerDown={(e) => { e.preventDefault(); e.stopPropagation(); deletePreset(n); }}
+                      />
                     </span>
                   </SelectItem>
                 ))}
@@ -250,6 +278,7 @@ export function FilterBuilder({ open, initial, onApply, onClose }: Props) {
           )}
           {conditions.map((c, i) => {
             const needsValue = c.op !== 'empty' && c.op !== 'notempty';
+            const isList = c.op === 'in' || c.op === 'notin';
             const fieldType = FIELDS.find((f) => f.value === c.field)?.type ?? 'text';
             return (
               <div key={i} className="flex items-center gap-2">
@@ -274,19 +303,28 @@ export function FilterBuilder({ open, initial, onApply, onClose }: Props) {
                   // An ADIF date is picked with a calendar but STORED as the
                   // 8-digit form the column holds, so the comparison stays a
                   // plain string one on both sides.
-                  type={fieldType === 'date' || fieldType === 'adifdate' ? 'date' : fieldType === 'number' ? 'number' : 'text'}
+                  // A list is typed by hand, commas and all, so it stays a text
+                  // box even on a date or number field: a calendar cannot express
+                  // "any one of these".
+                  type={isList ? 'text'
+                    : fieldType === 'date' || fieldType === 'adifdate' ? 'date'
+                      : fieldType === 'number' ? 'number' : 'text'}
                   className="h-8 flex-1 text-xs"
                   disabled={!needsValue}
-                  placeholder={needsValue ? (fieldType === 'date' ? 'YYYY-MM-DD' : t('fltb.valuePh')) : '—'}
+                  placeholder={!needsValue ? '—'
+                    : isList ? t('fltb.listPh')
+                      : fieldType === 'date' ? 'YYYY-MM-DD' : t('fltb.valuePh')}
                   // \d, not d: the escape was missing, so the test never matched
                   // an 8-digit ADIF date and the calendar input was handed
                   // "20260728" — which type=date rejects, showing an empty box
                   // over a value that was really there.
-                  value={fieldType === 'adifdate' && /^\d{8}$/.test(c.value)
+                  // The ADIF reshaping is skipped for a list: it would eat the
+                  // commas and leave one unreadable run of digits.
+                  value={!isList && fieldType === 'adifdate' && /^\d{8}$/.test(c.value)
                     ? `${c.value.slice(0, 4)}-${c.value.slice(4, 6)}-${c.value.slice(6, 8)}`
                     : c.value}
                   onChange={(e) => setCond(i, {
-                    value: fieldType === 'adifdate' ? e.target.value.replace(/-/g, '') : e.target.value,
+                    value: !isList && fieldType === 'adifdate' ? e.target.value.replace(/-/g, '') : e.target.value,
                   })}
                   onKeyDown={(e) => { if (e.key === 'Enter') apply(); }}
                 />
@@ -309,6 +347,7 @@ export function FilterBuilder({ open, initial, onApply, onClose }: Props) {
           <Button variant="outline" size="sm" className="h-8" disabled={!presetName.trim()} onClick={saveCurrentPreset}>
             <Save className="size-3.5 mr-1" /> {t('fltb.savePreset')}
           </Button>
+          {savedMsg && <span className="text-[11px] text-success truncate">{savedMsg}</span>}
         </div>
         </div>
 

frontend/src/components/FlexPanel.tsx

@@ -323,13 +323,18 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
     }
     // eslint-disable-next-line react-hooks/exhaustive-deps
   }, [st.cw_speed]);
-  // Peak-hold: keep the highest reading for ~2 s so the jittery VITA-49 meters
+  // Peak-hold: keep the highest reading for a second so the jittery VITA-49
-  // read steadily instead of jumping every poll.
+  // meters read steadily instead of jumping every poll. One second, not two —
+  // longer and the meters visibly trail the end of a transmission, which reads
+  // as the app lagging rather than as a peak being held.
   const peak = useRef<Record<string, { v: number; t: number }>>({});
-  const peakHold = (key: string, val: number) => {
+  const peakHold = (key: string, val: number, windowMs = 1000, live = true) => {
+    // live=false throws the held value away at once (e.g. the carrier dropped),
+    // so the meter falls immediately instead of coasting for the window.
+    if (!live) { delete peak.current[key]; return val; }
     const now = Date.now();
     const p = peak.current[key];
-    if (!p || val >= p.v || now - p.t > 2000) { peak.current[key] = { v: val, t: now }; return val; }
+    if (!p || val >= p.v || now - p.t > windowMs) { peak.current[key] = { v: val, t: now }; return val; }
     return p.v;
   };
 
@@ -355,12 +360,12 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
   }, []);
 
   // PowerGenius XL direct connection (fan mode), independent of the Flex link.
-  const [pg, setPg] = useState<{ connected: boolean; fan_mode?: string; host?: string; last_error?: string }>({ connected: false });
+  const [pg, setPg] = useState<{ connected: boolean; fan_mode?: string; host?: string; last_error?: string; state?: string; peak_w?: number }>({ connected: false });
   useEffect(() => {
     let alive = true;
     const tick = async () => { try { const s: any = await GetPGXLStatus(); if (alive) setPg(s || { connected: false }); } catch {} };
     tick();
-    const id = window.setInterval(tick, 2000);
+    const id = window.setInterval(tick, 250); // match the amp's 250 ms poll so the card catches every envelope peak
     return () => { alive = false; window.clearInterval(id); };
   }, []);
 
@@ -978,10 +983,12 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
                   spe.operate ? 'bg-warning text-warning-foreground border-warning shadow-[0_0_14px] shadow-warning/50' : 'bg-card text-warning border-warning hover:bg-warning-muted')}>
                 {spe.operate ? 'OPERATE' : 'STANDBY'}
               </button>
-              {/* Power ON / OFF (best-guess keystrokes from the APG — verify on hw). */}
+              {/* Power ON pulses RTS then DTR — it must stay clickable while the amp
+                  is off (no status = not "connected"), and serial only. */}
               <div className="inline-flex rounded-lg overflow-hidden border-2 border-success/70">
-                <button type="button" disabled={!spe.connected}
+                <button type="button" disabled={!(spe.connected || spe.transport === 'serial')}
                   onClick={() => AmpPower(selAmp.id, true).catch(() => {})}
+                  title={spe.transport === 'serial' ? 'Power on (RTS then DTR pulse)' : 'Power-on needs the serial RTS/DTR lines — not available over a network bridge'}
                   className="px-3 py-2 text-sm font-bold bg-card text-success hover:bg-success/15 disabled:opacity-30">ON</button>
                 <button type="button" disabled={!spe.connected}
                   onClick={() => AmpPower(selAmp.id, false).catch(() => {})}
@@ -1083,9 +1090,6 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
                   st.amp_operate ? 'bg-warning text-warning-foreground border-warning shadow-[0_0_14px] shadow-warning/50' : 'bg-card text-warning border-warning hover:bg-warning-muted')}>
                 {st.amp_operate ? 'OPERATE' : 'STANDBY'}
               </button>
-              <span className="text-xs text-muted-foreground">
-                {st.amp_operate ? t('flxp.ampInLine') : t('flxp.ampBypassed')}
-              </span>
               {/* Fan mode — shown when the PowerGenius is configured (Settings →
                   PowerGenius). The dot shows the direct-connection state; the
                   selector is disabled until connected (hover it for the error). */}
@@ -1113,11 +1117,38 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
             {/* Amplifier meters (FWD / ID / TEMP) — moved here from the Meters card
                 and shown compact so they sit with the amp controls. */}
             {(() => {
+              // Prefer the radio's VITA amp meters when they are flowing (local or
+              // over a VPN) — fast, and the same values SmartSDR shows (incl. the
+              // right temperature sensor). Fall back to the amp's OWN link only when
+              // the radio isn't streaming them (a remote link without VITA).
               const meters = st.meters || [];
               const dbmToW = (d: number) => Math.pow(10, (d - 30) / 10);
               const amp = meters.filter((m) => (m.src || '').toUpperCase().includes('AMP')
                 && !/^(RL|DRV)$/i.test((m.name || '').trim()));
-              if (off || amp.length === 0) return null;
+              if (off || amp.length === 0) {
+                const P = pg as any;
+                if (!P.connected) return null;
+                // Direct-link fallback: a 500 ms poll samples the SSB envelope at
+                // random points, so peak-hold it (live=txing drops it the instant
+                // PTT releases). The LDMOS pair can pull well past 25 A → 50 A scale.
+                const txing = typeof st.transmitting === 'boolean' ? st.transmitting : /TRANSMIT/i.test(P.state || '');
+                const w = txing ? Math.round(Number(P.fwd_w) || 0) : 0;
+                const idA = txing ? Number(P.id) || 0 : 0;
+                const temp = Number(P.temperature) || 0;
+                return (
+                  <div className="grid grid-cols-2 sm:grid-cols-3 gap-2 mt-2 pt-2 border-t border-border/50">
+                    <MeterBar label={t('ampw.pwr')} value={peakHold('pgw', w, 2500, txing)} unit="W" lo={0} hi={2000} accent="#dc2626" />
+                    <MeterBar label={t('ampw.id')} value={peakHold('pgid', idA, 2500, txing)} unit="A" lo={0} hi={50} accent="#16a34a" />
+                    <MeterBar label={t('ampw.temp')} value={temp} unit="°C" lo={0} hi={80} accent="#ea580c" />
+                  </div>
+                );
+              }
+              // Power comes from the radio's meter stream and nothing else. The
+              // amplifier also reports a "peakfwd", and using it was a mistake
+              // twice over: it is a latched maximum that is never reset, and it
+              // survives in the last-known status after the amp disconnects — so
+              // it claimed 1350 W from an old transmission while the radio was
+              // putting out 10.
               return (
                 <div className="grid grid-cols-2 sm:grid-cols-3 gap-2 mt-2 pt-2 border-t border-border/50">
                   {amp.map((m) => {
@@ -1126,14 +1157,13 @@ export function FlexPanel({ onCWSpeed, onReportRST }: { onCWSpeed?: (wpm: number
                     }
                     const acc = /temp|degc|degf/i.test(`${m.unit}${m.name}`) ? '#ea580c' : /volt/i.test(m.unit || '') ? '#2563eb' : '#16a34a';
                     // Drain current (ID): the PGXL reports a full-scale far too small
-                    // for this meter (~3 A), so 1.5 A pinned the bar near half. The
+                    // for this meter, so it pinned the bar. Give it a fixed 50 A scale
-                    // value itself is fine — only the bar's range was wrong. Give it a
+                    // (the LDMOS pair can pull ~45-50 A near full output), overriding an
-                    // fixed 25 A scale (the PGXL's LDMOS pair tops out around 20 A), and
+                    // unusable reported range but keeping a sane one.
-                    // only override an unusable reported range, not a sane one.
                     let lo = m.lo, hi = m.hi;
                     if (/amp/i.test(m.unit || '') || /^ID$|current/i.test(m.name || '')) {
                       lo = 0;
-                      hi = m.hi >= 25 ? m.hi : 25;
+                      hi = m.hi >= 50 ? m.hi : 50;
                     }
                     return <MeterBar key={m.id} label={m.name || `AMP ${m.id}`} value={peakHold(`amp${m.id}`, m.value)} unit={m.unit} lo={lo} hi={hi} accent={acc} />;
                   })}

frontend/src/components/GridSquareMap.tsx

@@ -0,0 +1,308 @@
+import { useEffect, useMemo, useRef, useState } from 'react';
+import L from 'leaflet';
+import 'leaflet/dist/leaflet.css';
+import { Loader2, RefreshCw } from 'lucide-react';
+import { GridSquares } from '../../wailsjs/go/main/App';
+import { gridSquareBounds, gridToLatLon } from '@/lib/maidenhead';
+import { useI18n } from '@/lib/i18n';
+import { cn } from '@/lib/utils';
+import { BASEMAPS, addBasemap, loadBasemap, type BasemapKey } from '@/components/MainMap';
+import { writeUiPref } from '@/lib/uiPref';
+
+// GridSquareMap — every Maidenhead square in the log, drawn on a world map.
+//
+// A square, not a marker. The question this answers is "where have I been
+// heard", and the shape of the answer is an area: a wall of squares across the
+// Atlantic and a bare Pacific says something about an antenna that a scatter of
+// pins does not. Confirmed and merely worked are two fills of the same hue —
+// the distinction is a STATE of one thing, not two categories, so it must not
+// be two unrelated colours.
+//
+// 4 characters, never 6: at world zoom a 6-character square is sub-pixel, and
+// aggregating to the big square is also how the count means "contacts in this
+// square" rather than "contacts at this exact spot".
+
+type Square = { grid: string; count: number; confirmed: boolean; band?: string; mode?: string };
+
+// The SAME basemaps the Main-tab world map offers, imported rather than copied:
+// two lists of tile servers is how one map ends up on a provider the other has
+// already been blocked by. This map opened on a hardcoded dark Carto, which is
+// the least legible of the four under translucent squares.
+
+// Leaflet geometry is painted onto a CANVAS, and canvas takes a colour, not a
+// stylesheet: "var(--success)" handed to fillStyle is simply invalid and the
+// shape is silently not drawn — a map with a correct square count and nothing
+// on it. So the token is RESOLVED to its literal value here, once per theme,
+// which is also why every other map in this app passes hex.
+// The Earth, in the projection's own terms. Latitude stops at ±85.0511 because
+// that is where Web Mercator does.
+const WORLD_BOUNDS = L.latLngBounds(L.latLng(-85.0511, -180), L.latLng(85.0511, 180));
+
+function cssColour(token: string, fallback: string): string {
+  try {
+    const v = getComputedStyle(document.documentElement).getPropertyValue(token).trim();
+    return v || fallback;
+  } catch { return fallback; }
+}
+
+// Mode scope. The names come straight from the backend's own classes ("ALL",
+// "PHONE", "CW", "DIGI") plus FTX, which is narrower than digital and usually
+// the honest one beside an FTx panel — a square worked on RTTY in a contest is
+// not a square worked on FT8.
+const SCOPES = [
+  { key: 'ALL', label: 'gsm.all' },
+  { key: 'PHONE', label: 'gsm.phone' },
+  { key: 'CW', label: 'gsm.cw' },
+  { key: 'DIGI', label: 'gsm.digital' },
+  { key: 'FTX', label: 'gsm.ftx' },
+] as const;
+type ScopeKey = typeof SCOPES[number]['key'];
+
+const SCOPE_KEY = 'opslog.gridMapScope';
+// Chosen fill colours. Empty means "follow the theme", which is the default and
+// stays the default: the tokens already track the four themes, and freezing a
+// hex at first run would leave a dark-theme map painted in the light palette.
+const COL_CONFIRMED_KEY = 'opslog.gridMapColorConfirmed';
+const COL_WORKED_KEY = 'opslog.gridMapColorWorked';
+
+// A colour input only accepts #rrggbb. The theme tokens ARE plain hex today, so
+// this normally just passes them through — but a token that ever becomes oklch()
+// or a named colour would silently drive the swatch to black, and a fallback is
+// cheaper than that debugging session.
+function asHex(v: string, fallback: string): string {
+  return /^#[0-9a-f]{6}$/i.test(v.trim()) ? v.trim() : fallback;
+}
+
+export function GridSquareMap({ myGrid, className }: { myGrid?: string; className?: string }) {
+  const { t } = useI18n();
+  const hostRef = useRef<HTMLDivElement>(null);
+  const mapRef = useRef<L.Map | null>(null);
+  const layerRef = useRef<L.LayerGroup | null>(null);
+  const [squares, setSquares] = useState<Square[] | null>(null);
+  const [busy, setBusy] = useState(false);
+  const [err, setErr] = useState('');
+  const [scope, setScope] = useState<ScopeKey>(
+    () => (SCOPES.some((s) => s.key === localStorage.getItem(SCOPE_KEY))
+      ? (localStorage.getItem(SCOPE_KEY) as ScopeKey) : 'DIGI'));
+
+  const [basemap, setBasemap] = useState<BasemapKey>(loadBasemap);
+  const [confColour, setConfColour] = useState(() => localStorage.getItem(COL_CONFIRMED_KEY) ?? '');
+  const [workedColour, setWorkedColour] = useState(() => localStorage.getItem(COL_WORKED_KEY) ?? '');
+  // Repaint the squares when the THEME changes, not the basemap: the fills come
+  // from theme tokens resolved at draw time, so a theme switch leaves them on
+  // the old palette until something forces a redraw.
+  const [themeTick, setThemeTick] = useState(0);
+  useEffect(() => {
+    const obs = new MutationObserver(() => setThemeTick((n) => n + 1));
+    obs.observe(document.documentElement, { attributes: true, attributeFilter: ['data-theme'] });
+    return () => obs.disconnect();
+  }, []);
+
+  const load = async (sc: ScopeKey = scope) => {
+    setBusy(true); setErr('');
+    try {
+      const r = (await GridSquares(sc)) as any;
+      setSquares((Array.isArray(r) ? r : []) as Square[]);
+    } catch (e: any) {
+      setErr(String(e?.message ?? e));
+      setSquares([]);
+    } finally { setBusy(false); }
+  };
+  useEffect(() => { void load(scope); /* eslint-disable-next-line react-hooks/exhaustive-deps */ }, [scope]);
+
+  // One-time map creation. preferCanvas: a busy digital log is a few thousand
+  // rectangles, and as SVG that is a few thousand DOM nodes to lay out on every
+  // pan.
+  useEffect(() => {
+    if (!hostRef.current || mapRef.current) return;
+    const m = L.map(hostRef.current, {
+      preferCanvas: true,
+      zoomControl: true,
+      attributionControl: true,
+      // ONE world, not a row of them. worldCopyJump exists to make a path look
+      // continuous across the date line; here it only meant the same continent
+      // appeared two or three times, each carrying the same squares.
+      worldCopyJump: false,
+      // Zoom 0 is the whole planet in 256 pixels — the level at which Greenland
+      // and Antarctica are both on screen. The old floor of 1 made that
+      // impossible on any window wider than it is tall: one step out was already
+      // too far in.
+      minZoom: 0,
+      maxBoundsViscosity: 1, // don't let a drag slide the world off to one side
+    }).setView([20, 0], 2);
+    // The whole world, once, whatever the window is shaped like — computed by
+    // Leaflet from the container rather than guessed with a zoom number.
+    m.fitWorld({ animate: false });
+    // Latitude only: the poles are the edge of the projection and there is
+    // nothing beyond them, while leaving longitude free keeps a drag from
+    // fighting the operator near the date line.
+    m.setMaxBounds(L.latLngBounds(L.latLng(-85, -Infinity), L.latLng(85, Infinity)));
+    mapRef.current = m;
+    layerRef.current = L.layerGroup().addTo(m);
+    // Leaflet measures its container ONCE, when the map is created, and never
+    // looks again. Here that measurement happens while the panel is still
+    // laying out — so the map kept the height it had at that instant and the
+    // rest of the panel stayed blank underneath it, whatever the window size.
+    // Watching the host is the only fix that also survives a window resize, a
+    // split-pane drag and the tab being shown for the first time.
+    // fitWorld above ran against a container that may still have had no size —
+    // the tab is mounted hidden. Fit ONCE more the first time it really has one,
+    // and never again: after that the view belongs to the operator.
+    let fitted = false;
+    const ro = new ResizeObserver(() => {
+      m.invalidateSize({ animate: false });
+      const el = hostRef.current;
+      if (!fitted && el && el.clientWidth > 0 && el.clientHeight > 0) {
+        fitted = true;
+        m.fitWorld({ animate: false });
+      }
+    });
+    ro.observe(hostRef.current);
+    return () => { ro.disconnect(); m.remove(); mapRef.current = null; layerRef.current = null; };
+  }, []);
+
+  // The chosen basemap, shared with the Main-tab map so picking one there and
+  // finding another here cannot happen.
+  const baseRef = useRef<L.TileLayer | null>(null);
+  const labelsRef = useRef<L.TileLayer | null>(null);
+  useEffect(() => {
+    const m = mapRef.current;
+    if (!m) return;
+    // noWrap stops the world REPEATING; bounds stops Leaflet asking for the
+    // empty columns either side of it. What is left beside the planet is then
+    // the panel's own background rather than a wall of grey apologies.
+    addBasemap(m, basemap, baseRef, labelsRef, { noWrap: true, bounds: WORLD_BOUNDS });
+    baseRef.current?.bringToBack();
+  }, [basemap]);
+
+  // Redraw the squares.
+  useEffect(() => {
+    const layer = layerRef.current;
+    if (!layer) return;
+    layer.clearLayers();
+    // Resolved once for the whole redraw, not per square: getComputedStyle
+    // forces a style flush, and doing that a thousand times is a visible stall.
+    const confirmedColour = confColour || cssColour('--success', '#16a34a');
+    const workedFill = workedColour || cssColour('--chart-1', '#2a78d6');
+    const meColour = cssColour('--warning', '#f59e0b');
+    for (const sq of squares ?? []) {
+      const b = gridSquareBounds(sq.grid);
+      if (!b) continue;
+      // One hue, two states. Confirmed is the solid, saturated one; worked is
+      // the same colour held back — so the eye reads "more" and "less" of the
+      // same thing rather than two unrelated facts.
+      const colour = sq.confirmed ? confirmedColour : workedFill;
+      L.rectangle([[b.south, b.west], [b.north, b.east]], {
+        color: colour,
+        weight: 0.5,
+        opacity: sq.confirmed ? 0.9 : 0.5,
+        fillColor: colour,
+        fillOpacity: sq.confirmed ? 0.55 : 0.22,
+      })
+        .bindTooltip(
+          `${sq.grid} — ${sq.count} QSO${sq.count > 1 ? 's' : ''}` +
+          `${sq.band ? ` · ${sq.band}` : ''}${sq.mode ? ` ${sq.mode}` : ''}` +
+          `${sq.confirmed ? ` · ${t('gsm.confirmed')}` : ''}`,
+          { sticky: true },
+        )
+        .addTo(layer);
+    }
+    // The operator's own square, so the pattern has an origin to be read from.
+    const me = myGrid ? gridToLatLon(myGrid) : null;
+    if (me) {
+      L.circleMarker([me.lat, me.lon], {
+        radius: 4, color: meColour, weight: 2,
+        fillColor: meColour, fillOpacity: 1,
+      }).bindTooltip(myGrid!.toUpperCase(), { sticky: true }).addTo(layer);
+    }
+  }, [squares, myGrid, t, themeTick, confColour, workedColour]);
+
+  const stats = useMemo(() => {
+    const list = squares ?? [];
+    return { total: list.length, confirmed: list.filter((s) => s.confirmed).length };
+  }, [squares]);
+
+  return (
+    // isolate is load-bearing, not tidiness. Leaflet puts its panes at z-index
+    // 400 and its zoom control at 1000, in the PAGE's stacking context — and the
+    // modals here are z-50. Without a stacking context of its own the map floats
+    // over Preferences and hides the Save and Close buttons. isolation:isolate
+    // confines every z-index Leaflet sets to this element.
+    <section className={cn('isolate relative flex flex-col min-h-0 rounded-lg border border-border bg-card overflow-hidden', className)}>
+      <header className="flex items-center gap-2 px-2.5 py-1.5 border-b border-border bg-muted/40 shrink-0 flex-wrap">
+        <span className="text-xs font-semibold uppercase tracking-wider text-muted-foreground">
+          {t('gsm.title')}
+        </span>
+        <div className="inline-flex rounded-md border border-border overflow-hidden">
+          {SCOPES.map((s, i) => (
+            <button key={s.key} type="button"
+              onClick={() => { setScope(s.key); try { localStorage.setItem(SCOPE_KEY, s.key); } catch { /* quota */ } }}
+              className={cn('px-1.5 h-6 text-[11px] whitespace-nowrap', i > 0 && 'border-l border-border',
+                scope === s.key ? 'bg-primary text-primary-foreground' : 'hover:bg-muted text-muted-foreground')}>
+              {t(s.label)}
+            </button>
+          ))}
+        </div>
+        <span className="text-[11px] text-muted-foreground tabular-nums">
+          {t('gsm.count', { n: stats.total, c: stats.confirmed })}
+        </span>
+        <select
+          value={basemap}
+          onChange={(e) => { const v = e.target.value as BasemapKey; setBasemap(v); writeUiPref('opslog.mapBasemap', v); }}
+          title={t('gsm.basemap')}
+          className="h-6 rounded border border-border bg-background px-1 text-[11px]"
+        >
+          {(Object.keys(BASEMAPS) as BasemapKey[]).map((k) => (
+            <option key={k} value={k}>{BASEMAPS[k].label}</option>
+          ))}
+        </select>
+        {/* Beside the basemap, because they answer the same question: what this
+            map looks like. Written straight through — there is no Save here. */}
+        <label className="inline-flex items-center gap-1 text-[11px] text-muted-foreground" title={t('gsm.colConfirmed')}>
+          <input type="color" className="size-5 rounded border border-border bg-transparent p-0 cursor-pointer"
+            value={asHex(confColour || cssColour('--success', '#16a34a'), '#16a34a')}
+            onChange={(e) => { setConfColour(e.target.value); writeUiPref(COL_CONFIRMED_KEY, e.target.value); }} />
+          {t('gsm.confirmed')}
+        </label>
+        <label className="inline-flex items-center gap-1 text-[11px] text-muted-foreground" title={t('gsm.colWorked')}>
+          <input type="color" className="size-5 rounded border border-border bg-transparent p-0 cursor-pointer"
+            value={asHex(workedColour || cssColour('--chart-1', '#2a78d6'), '#2a78d6')}
+            onChange={(e) => { setWorkedColour(e.target.value); writeUiPref(COL_WORKED_KEY, e.target.value); }} />
+          {t('gsm.worked')}
+        </label>
+        {(confColour || workedColour) && (
+          <button type="button" title={t('gsm.colReset')}
+            onClick={() => {
+              setConfColour(''); setWorkedColour('');
+              writeUiPref(COL_CONFIRMED_KEY, ''); writeUiPref(COL_WORKED_KEY, '');
+            }}
+            className="text-[11px] text-muted-foreground hover:text-foreground px-1">↺</button>
+        )}
+        <span className="flex-1" />
+        <button type="button" onClick={() => void load()} disabled={busy} title={t('gsm.refresh')}
+          className="inline-flex items-center justify-center size-6 rounded border border-border hover:bg-muted disabled:opacity-50">
+          {busy ? <Loader2 className="size-3 animate-spin" /> : <RefreshCw className="size-3" />}
+        </button>
+      </header>
+      {err && <p className="px-2.5 py-1 text-[11px] text-destructive shrink-0">{err}</p>}
+      {/* The map host must have a real height or Leaflet renders nothing at all
+          — flex-1 + min-h-0, never a percentage. */}
+      {/* The ground beside the planet is the panel's own background: Leaflet
+          paints its container, and left to its default that surround was a
+          bright white slab against a dark theme. */}
+      <div ref={hostRef} className="flex-1 min-h-0 bg-card" />
+      <footer className="flex items-center gap-3 px-2.5 py-1 border-t border-border bg-muted/30 shrink-0 text-[10px] text-muted-foreground">
+        <span className="inline-flex items-center gap-1.5">
+          <span className="inline-block size-2.5 rounded-[2px]"
+            style={{ background: confColour || 'var(--success)', opacity: 0.75 }} />
+          {t('gsm.confirmed')}
+        </span>
+        <span className="inline-flex items-center gap-1.5">
+          <span className="inline-block size-2.5 rounded-[2px]"
+            style={{ background: workedColour || 'var(--chart-1)', opacity: 0.35 }} />
+          {t('gsm.worked')}
+        </span>
+      </footer>
+    </section>
+  );
+}

frontend/src/components/IcomPanel.tsx

@@ -47,12 +47,33 @@ const ZERO: IcomState = {
 
 // Band buttons jump the VFO to a sensible default frequency (SSB/CW mix) using
 // the plain SetFrequency command — no band-stacking codes needed. Hz values.
-const BANDS: { l: string; hz: number }[] = [
+type Band = { l: string; hz: number };
+
+const HF_BANDS: Band[] = [
   { l: '160', hz: 1_840_000 }, { l: '80', hz: 3_750_000 }, { l: '40', hz: 7_100_000 },
   { l: '30', hz: 10_130_000 }, { l: '20', hz: 14_150_000 }, { l: '17', hz: 18_130_000 },
   { l: '15', hz: 21_250_000 }, { l: '12', hz: 24_950_000 }, { l: '10', hz: 28_400_000 },
-  { l: '6', hz: 50_150_000 },
 ];
+const B6 = { l: '6', hz: 50_150_000 };
+const B2 = { l: '2', hz: 144_300_000 };       // SSB calling
+const B70 = { l: '70cm', hz: 432_200_000 };   // SSB calling
+const B23 = { l: '23cm', hz: 1_296_200_000 }; // SSB calling
+
+// Band buttons jump the VFO to a sensible default frequency (SSB/CW mix) using
+// the plain SetFrequency command — no band-stacking codes needed.
+//
+// Which buttons to OFFER depends on the radio, exactly as the attenuator steps
+// do below. An IC-9700 has no HF at all, yet the console was showing it 160
+// through 6 and none of the bands it actually covers: ten dead buttons, and no
+// way to change band from here on the only rig where you would want to.
+function bandsFor(model?: string): Band[] {
+  const m = (model ?? '').toUpperCase();
+  if (m.includes('9700')) return [B2, B70, B23];          // VHF/UHF/SHF only
+  if (m.includes('705')) return [...HF_BANDS, B6, B2, B70];
+  if (m.includes('9100')) return [...HF_BANDS, B6, B2, B70, B23];
+  // 7300 / 7610 / 7100 / unknown: HF + 6 m, the historical list.
+  return [...HF_BANDS, B6];
+}
 
 // Mode buttons for the console (like RS-BA1's row). SetCATMode picks USB/LSB for
 // SSB by frequency and the rig's data variant for digital modes.
@@ -85,7 +106,10 @@ function bandOfHz(hz?: number): string {
     ['160', 1.8, 2.0], ['80', 3.5, 4.0], ['60', 5.25, 5.45], ['40', 7.0, 7.3],
     ['30', 10.1, 10.15], ['20', 14.0, 14.35], ['17', 18.068, 18.168],
     ['15', 21.0, 21.45], ['12', 24.89, 24.99], ['10', 28.0, 29.7],
-    ['6', 50.0, 54.0], ['4', 70.0, 70.5], ['2', 144.0, 148.0], ['70', 430.0, 450.0],
+    // Labels must match the band buttons' exactly — this is only used to light
+    // the button for the band the rig is on, and '70' never matched '70cm'.
+    ['6', 50.0, 54.0], ['4', 70.0, 70.5], ['2', 144.0, 148.0],
+    ['70cm', 430.0, 450.0], ['23cm', 1240.0, 1300.0],
   ];
   for (const [name, lo, hi] of bands) if (mhz >= lo && mhz <= hi) return name;
   return '';
@@ -749,7 +773,7 @@ export function IcomPanel({ onReportRST, isNetwork = false }: { onReportRST?: (r
       {/* Band buttons + antenna selection. */}
       <Card icon={Antenna} title={t('icmp.bandsAntenna')} accent="#0891b2">
         <div className="grid grid-cols-5 gap-1.5">
-          {BANDS.map((b) => {
+          {bandsFor(st.model).map((b) => {
             const here = bandOfHz(mainHz) === b.l;
             return (
               <button key={b.l} type="button" onClick={() => SetCATFrequency(b.hz).catch(() => {})}

frontend/src/components/LogViewer.tsx

@@ -0,0 +1,143 @@
+import { useCallback, useEffect, useMemo, useRef, useState } from 'react';
+import { Dialog, DialogContent, DialogHeader, DialogTitle, DialogDescription } from '@/components/ui/dialog';
+import { Button } from '@/components/ui/button';
+import { Input } from '@/components/ui/input';
+import { Checkbox } from '@/components/ui/checkbox';
+import { useI18n } from '@/lib/i18n';
+import { TailLogFile, GetLogFilePath } from '../../wailsjs/go/main/App';
+
+// LogViewer shows the tail of opslog.log and keeps it current while open.
+//
+// This exists because diagnosing a problem used to mean asking the operator to
+// find a file in their data directory, open it in a text editor, and re-open it
+// after every attempt. Half the round-trips in a bug report were spent on that.
+//
+// Three behaviours matter more than they look:
+//   • Auto-scroll is a checkbox the operator owns, AND it releases itself the
+//     moment they scroll up — otherwise the line they are reading is yanked away
+//     a second later, which defeats the one thing this window is for. Scrolling
+//     back to the bottom re-arms it, so following is never a dead end.
+//   • The filter keeps only matching LINES rather than highlighting inside a
+//     256 KB blob: with "cluster" or "acom" typed in, the window becomes exactly
+//     the subsystem trace you would have grepped for.
+//   • It polls only while open. A closed dialog costs nothing.
+// 512 KB ≈ 3200 lines. The window is a sliding tail: once new lines push past it
+// the oldest fall out of the fetched text entirely, so a small buffer dropped
+// lines the operator was still reading during a busy trace (CAT/cluster/antenna
+// polling). This is double the old 256 KB — 1 MB was tried but the per-second
+// fetch + split + re-render of ~6500 lines made the window lag. 512 KB keeps a
+// useful backlog while staying smooth. The backend caps this at 4 MB.
+const TAIL_BYTES = 512 * 1024;
+const POLL_MS = 1000;
+
+export function LogViewer({ open, onOpenChange }: { open: boolean; onOpenChange: (v: boolean) => void }) {
+  const { t } = useI18n();
+  const [text, setText] = useState('');
+  const [path, setPath] = useState('');
+  const [query, setQuery] = useState('');
+  const [autoScroll, setAutoScroll] = useState(true);
+  // Shown next to the checkbox so a QUIET log still proves it is being polled —
+  // without it there is no way to tell 'nothing new' from 'window is dead'.
+  const [lastPull, setLastPull] = useState('');
+  const boxRef = useRef<HTMLPreElement>(null);
+  const autoRef = useRef(true);
+  useEffect(() => { autoRef.current = autoScroll; }, [autoScroll]);
+
+  // stick pins the view to the bottom on the NEXT frame. Setting scrollTop
+  // straight away is not enough while the dialog is still animating in: the box
+  // has no height yet, scrollHeight is wrong, and the scroll silently does
+  // nothing — leaving the operator staring at the top of a 256 KB buffer, i.e.
+  // at lines from hours ago, which looks exactly like a frozen window.
+  const stick = useCallback(() => {
+    if (!autoRef.current) return;
+    requestAnimationFrame(() => {
+      const el = boxRef.current;
+      if (el) el.scrollTop = el.scrollHeight;
+    });
+  }, []);
+
+  const pull = useCallback(() => {
+    TailLogFile(TAIL_BYTES).then((s: any) => {
+      setText(String(s ?? ''));
+      setLastPull(new Date().toLocaleTimeString());
+    }).catch(() => {});
+  }, []);
+
+  useEffect(() => {
+    if (!open) return;
+    setAutoScroll(true);
+    autoRef.current = true;
+    GetLogFilePath().then((p: any) => setPath(String(p ?? ''))).catch(() => {});
+    pull();
+    // Re-assert the bottom after the open animation has settled. A quiet log
+    // never changes, so the content-driven scroll below would never fire again
+    // and the first attempt would be the only one.
+    const t1 = window.setTimeout(stick, 120);
+    const t2 = window.setTimeout(stick, 450);
+    const id = window.setInterval(pull, POLL_MS);
+    return () => { window.clearInterval(id); window.clearTimeout(t1); window.clearTimeout(t2); };
+  }, [open, pull, stick]);
+
+  const all = useMemo(() => text.split('\n'), [text]);
+  const shown = useMemo(() => {
+    const q = query.trim().toLowerCase();
+    if (!q) return all;
+    return all.filter((l) => l.toLowerCase().includes(q));
+  }, [all, query]);
+
+  // Stick to the bottom after each refresh, but only while auto-scroll is on.
+  useEffect(() => { if (open) stick(); }, [shown, open, stick]);
+
+  // Scrolling away from the bottom releases auto-scroll; coming back re-arms it.
+  function onScroll() {
+    const el = boxRef.current;
+    if (!el) return;
+    setAutoScroll(el.scrollHeight - el.scrollTop - el.clientHeight < 24);
+  }
+
+  const body = shown.join('\n');
+  return (
+    <Dialog open={open} onOpenChange={onOpenChange}>
+      <DialogContent className="max-w-5xl">
+        <DialogHeader>
+          <DialogTitle>{t('logview.title')}</DialogTitle>
+          <DialogDescription className="font-mono text-[11px] break-all">{path}</DialogDescription>
+        </DialogHeader>
+
+        <div className="flex items-center gap-2">
+          <Input className="h-8 flex-1 font-mono text-xs" value={query} placeholder={t('logview.searchPh')}
+            onChange={(e) => setQuery(e.target.value)} />
+          {query.trim() !== '' && (
+            <span className="text-xs text-muted-foreground tabular-nums whitespace-nowrap">
+              {t('logview.matches', { n: shown.length, total: all.length })}
+            </span>
+          )}
+        </div>
+
+        <pre ref={boxRef} onScroll={onScroll}
+          className="h-[60vh] overflow-auto rounded-md border border-border bg-muted/30 p-2 text-[11px] leading-snug font-mono whitespace-pre-wrap break-all">
+          {body.trim() === '' ? t('logview.empty') : body}
+        </pre>
+
+        <div className="flex items-center gap-2">
+          <label className="flex items-center gap-2 text-xs cursor-pointer">
+            <Checkbox checked={autoScroll} onCheckedChange={(c) => {
+              const on = !!c;
+              setAutoScroll(on);
+              if (on) { const el = boxRef.current; if (el) el.scrollTop = el.scrollHeight; }
+            }} />
+            {t('logview.autoScroll')}
+          </label>
+          {lastPull && <span className="text-xs text-muted-foreground tabular-nums">{t('logview.updated', { time: lastPull })}</span>}
+          <div className="flex-1" />
+          <Button variant="outline" size="sm" onClick={() => navigator.clipboard?.writeText(body)}>
+            {t('logview.copy')}
+          </Button>
+          <Button variant="outline" size="sm" onClick={() => { setQuery(''); setAutoScroll(true); pull(); }}>
+            {t('logview.toEnd')}
+          </Button>
+        </div>
+      </DialogContent>
+    </Dialog>
+  );
+}

frontend/src/components/MainMap.tsx

@@ -43,24 +43,35 @@ function unwrapLon(ring: [number, number][]): [number, number][] {
 }
 
 const CARTO_LIGHT = 'https://{s}.basemaps.cartocdn.com/light_all/{z}/{x}/{y}{r}.png';
-const OSM = 'https://{s}.tile.openstreetmap.org/{z}/{x}/{y}.png';
 const CARTO_ATTR = '© OpenStreetMap © CARTO';
-const OSM_ATTR = '© OpenStreetMap contributors';
+
+// NOT tile.openstreetmap.org. Those are OpenStreetMap's VOLUNTEER-run servers,
+// and their usage policy does not cover a desktop application handed to an
+// unbounded number of operators — they blocked OpsLog for it, and every user's
+// map filled with "Access blocked / 403" tiles at once.
+//
+// The replacements are tile services whose terms do cover redistributed apps,
+// with no API key: Carto (whose tiles are OSM-derived, hence the attribution
+// still credits OpenStreetMap) and Esri. Anything added here later must be
+// checked the same way — a free tile URL is not the same thing as a tile URL we
+// are allowed to ship.
+const ESRI_STREET = 'https://server.arcgisonline.com/ArcGIS/rest/services/World_Street_Map/MapServer/tile/{z}/{y}/{x}';
+const ESRI_STREET_ATTR = 'Tiles © Esri — Source: Esri, HERE, Garmin, © OpenStreetMap contributors';
 
 // Selectable basemaps for the world (great-circle) map. All key-free and all
 // LABELLED (country/continent names). `labelsUrl` adds a transparent place-name
 // overlay on top of an imagery basemap (so satellite keeps its names too).
-type BasemapKey = 'light' | 'voyager' | 'street' | 'satellite';
+export type BasemapKey = 'light' | 'voyager' | 'street' | 'satellite';
-const BASEMAPS: Record<BasemapKey, { label: string; url: string; attr: string; subdomains?: string; labelsUrl?: string }> = {
+export const BASEMAPS: Record<BasemapKey, { label: string; url: string; attr: string; subdomains?: string; labelsUrl?: string }> = {
   light:     { label: 'Light',     url: CARTO_LIGHT, attr: CARTO_ATTR, subdomains: 'abcd' },
   voyager:   { label: 'Voyager',   url: 'https://{s}.basemaps.cartocdn.com/rastertiles/voyager/{z}/{x}/{y}{r}.png',
                attr: CARTO_ATTR, subdomains: 'abcd' },
-  street:    { label: 'Street',    url: OSM, attr: OSM_ATTR },
+  street:    { label: 'Street',    url: ESRI_STREET, attr: ESRI_STREET_ATTR },
   satellite: { label: 'Satellite', url: 'https://server.arcgisonline.com/ArcGIS/rest/services/World_Imagery/MapServer/tile/{z}/{y}/{x}',
                attr: 'Tiles &copy; Esri — Source: Esri, Maxar, Earthstar Geographics',
                labelsUrl: 'https://server.arcgisonline.com/ArcGIS/rest/services/Reference/World_Boundaries_and_Places/MapServer/tile/{z}/{y}/{x}' },
 };
-function loadBasemap(): BasemapKey {
+export function loadBasemap(): BasemapKey {
   const v = localStorage.getItem('opslog.mapBasemap');
   return v === 'voyager' || v === 'street' || v === 'satellite' ? v : 'light';
 }
@@ -69,18 +80,32 @@ function loadBasemap(): BasemapKey {
 // place-name overlay. updateWhenIdle/keepBuffer keep the number of live tiles
 // down: satellite loads TWO tile layers, so its tile count — and the composited
 // layers WebView2 has to hold — is double every other basemap's.
-function addBasemap(
+export function addBasemap(
   m: L.Map,
   key: BasemapKey,
   base: React.MutableRefObject<L.TileLayer | null>,
   labels: React.MutableRefObject<L.TileLayer | null>,
+  // noWrap draws the world ONCE instead of repeating it east and west.
+  //
+  // The great-circle map wants the repeats: a path from France to Japan reads
+  // better crossing a second copy of Asia than wrapping round the back. A map of
+  // where you have been heard does not — three North Americas is three times the
+  // same answer, and it makes the picture harder to read, not wider.
+  // bounds stops Leaflet asking for tiles outside the world at all: Esri answers
+  // those with a grey "Map data not yet available" image, and zoomed out on a
+  // wide window that is most of the screen.
+  opts?: { noWrap?: boolean; bounds?: L.LatLngBoundsExpression },
 ) {
   if (base.current) { m.removeLayer(base.current); base.current = null; }
   if (labels.current) { m.removeLayer(labels.current); labels.current = null; }
   const bm = BASEMAPS[key];
-  const opts: L.TileLayerOptions = { maxZoom: 19, updateWhenIdle: true, updateWhenZooming: false, keepBuffer: 1 };
+  const tileOpts: L.TileLayerOptions = {
-  base.current = L.tileLayer(bm.url, { ...opts, attribution: bm.attr, subdomains: bm.subdomains ?? 'abc' }).addTo(m);
+    maxZoom: 19, updateWhenIdle: true, updateWhenZooming: false, keepBuffer: 1,
-  if (bm.labelsUrl) labels.current = L.tileLayer(bm.labelsUrl, opts).addTo(m);
+    noWrap: !!opts?.noWrap,
+    ...(opts?.bounds ? { bounds: opts.bounds } : {}),
+  };
+  base.current = L.tileLayer(bm.url, { ...tileOpts, attribution: bm.attr, subdomains: bm.subdomains ?? 'abc' }).addTo(m);
+  if (bm.labelsUrl) labels.current = L.tileLayer(bm.labelsUrl, tileOpts).addTo(m);
 }
 
 function dot(color: string): L.DivIcon {
@@ -416,7 +441,14 @@ export function LocatorMap({ toGrid, toLabel }: LocatorProps) {
     if (locatorRef.current && !locatorMap.current) {
       const m = L.map(locatorRef.current, { zoomControl: true, attributionControl: true })
         .setView([20, 0], 2);
-      L.tileLayer(OSM, { attribution: OSM_ATTR, maxZoom: 19 }).addTo(m);
+      // Same restraint as the world map: fetch on idle, not mid-pan, and keep a
+      // single ring of buffer tiles. Requesting tiles as fast as the pointer
+      // moves is what gets an app blocked, and the next provider is under no
+      // more obligation to tolerate it than the last one was.
+      L.tileLayer(CARTO_LIGHT, {
+        attribution: CARTO_ATTR, subdomains: 'abcd', maxZoom: 19,
+        updateWhenIdle: true, updateWhenZooming: false, keepBuffer: 1,
+      }).addTo(m);
       locatorOverlay.current = L.layerGroup().addTo(m);
       locatorMap.current = m;
     }

frontend/src/components/MotorAntennaWidget.tsx

@@ -0,0 +1,298 @@
+// MotorAntennaWidget — the Ultrabeam / SteppIR control, in one place.
+//
+// Lives in its own file because it is shown in TWO: the Station Control tab and
+// the dock beside the entry strip. Two copies of a control that keys hardware is
+// how one of them quietly stops matching the other — a pattern button that sets
+// a different direction, a band list that tunes somewhere else.
+import { useCallback, useEffect, useState } from 'react';
+import { ArrowDownToLine, ChevronDown, ChevronUp, Loader2, Minus, Plus, RefreshCw, Antenna as AntennaIcon, X } from 'lucide-react';
+import { cn } from '@/lib/utils';
+import {
+  SetUltrabeamDirection, UltrabeamRetract, MotorSetElement, MotorReadElements,
+  MotorTuneKHz, MotorNudgeKHz, SetMotorFollow,
+} from '../../wailsjs/go/main/App';
+
+export type AntStatus = { enabled: boolean; type: string; connected: boolean; direction: number; frequency: number; moving: boolean; elements: number[]; follow?: boolean; step_khz?: number; track_mode?: string; bands?: string[]; band_freqs?: Record<string, number> };
+
+// Where each band button points the antenna.
+//
+// Not the arithmetic centre of the band. An antenna is tuned for where people
+// actually work: 20 m centres on 14175 but nobody lives there, and 10 m spans
+// 1.7 MHz of which the top half is empty. These are the points that leave the
+// elements closest to right for the whole band, and one nudge away from the rest.
+const ANT_BAND_KHZ: Record<string, number> = {
+  '40m': 7100, '30m': 10125, '20m': 14150, '17m': 18110,
+  '15m': 21150, '12m': 24930, '10m': 28400, '6m': 50150,
+};
+
+// NUDGE_KHZ is the up/down step. 25 kHz because that is also the finest tracking
+// threshold: a nudge smaller than the tracking step would be undone by the next
+// poll while tracking is on.
+const NUDGE_KHZ = 25;
+
+// bandOfKHz names the band a frequency sits in, so a band button can light up
+// when the ANTENNA is already there. Deliberately generous at the edges: the
+// antenna's reported frequency is where it was commanded, which can sit slightly
+// outside the allocation.
+function bandOfKHz(khz: number): string {
+  const edges: [number, number, string][] = [
+    [6900, 7300, '40m'], [10050, 10200, '30m'], [13900, 14400, '20m'],
+    [18000, 18200, '17m'], [20900, 21500, '15m'], [24800, 25000, '12m'],
+    [27900, 29800, '10m'], [49900, 50600, '6m'],
+  ];
+  for (const [lo, hi, b] of edges) if (khz >= lo && khz <= hi) return b;
+  return '';
+}
+
+// MotorAntennaWidget controls a motorized antenna (Ultrabeam / SteppIR) from the
+// Station Control tab: pattern (Normal / 180° / Bi), Retract, and — Ultrabeam
+// only — per-element length adjustment. Heading/state is polled by the panel.
+const ELEMENT_STEP = 2; // the physical console adjusts 2 mm per press
+
+// elementName maps an element index to a ham-radio name: 0 = reflector,
+// 1 = driven element, then Director 1, 2, 3…
+function elementName(i: number, t: (k: string, v?: any) => string): string {
+  if (i === 0) return t('station.reflector');
+  if (i === 1) return t('station.driven');
+  return `${t('station.director')} ${i - 1}`;
+}
+
+export function MotorAntennaWidget({ ant, refetch, t, onClose, essentialsOnly }: {
+  ant: AntStatus;
+  refetch: () => void;
+  t: (k: string, v?: any) => string;
+  // onClose adds the dock's close button. The Station Control tab passes none:
+  // there the widget is a tile in a grid, and a tile that closes itself would
+  // leave a hole the operator cannot fill back in.
+  onClose?: () => void;
+  // essentialsOnly drops what an operator sets once and then leaves alone:
+  // tracking with its mode and step, and the per-element lengths. They belong in
+  // Station Control, where there is room to think; in the dock they are height
+  // spent on controls nobody touches between contacts, pushing the ones they do
+  // touch — pattern, bands, nudge — off the bottom.
+  essentialsOnly?: boolean;
+}) {
+  const [err, setErr] = useState('');
+  const [lengths, setLengths] = useState<number[]>([]); // current element lengths (mm), from ReadElements
+  const [reading, setReading] = useState(false);
+  const [busyEl, setBusyEl] = useState<number | null>(null);
+  const [editingEl, setEditingEl] = useState<number | null>(null); // element whose mm is being typed
+  const [editVal, setEditVal] = useState('');
+  const run = (p: Promise<any>) => p.then(refetch).catch((e) => setErr(String(e?.message ?? e)));
+  const isUB = ant.type !== 'steppir';
+
+  const readLengths = useCallback(async () => {
+    setReading(true); setErr('');
+    try { setLengths(((await MotorReadElements()) ?? []) as number[]); }
+    catch (e: any) { setErr(String(e?.message ?? e)); }
+    finally { setReading(false); }
+  }, []);
+  // Read the current lengths once when the Ultrabeam widget mounts/connects, so
+  // +/- starts from the real values rather than blind.
+  useEffect(() => { if (isUB && ant.connected) readLengths(); }, [isUB, ant.connected, readLengths]);
+
+  // Send an absolute length to one element and remember it as the new baseline.
+  const setLen = async (i: number, mm: number) => {
+    const next = Math.max(0, Math.round(mm));
+    const prev = lengths[i] ?? 0;
+    setBusyEl(i); setErr('');
+    setLengths((ls) => { const c = [...ls]; c[i] = next; return c; }); // optimistic
+    try { await MotorSetElement(i, next); refetch(); }
+    catch (e: any) {
+      // Rejected by the controller — most often the element is at its travel
+      // limit for this band (extending on a low band). Revert the optimistic
+      // value so the display stays truthful, and explain the likely cause when
+      // the failed move was an extension.
+      setLengths((ls) => { const c = [...ls]; c[i] = prev; return c; });
+      setErr(next > prev ? t('station.atMax') : String(e?.message ?? e));
+    }
+    finally { setBusyEl(null); }
+  };
+  // Nudge one element by ±2 mm from its current known length.
+  const nudge = (i: number, delta: number) => setLen(i, (lengths[i] ?? 0) + delta);
+  // Commit a typed exact length (click on the mm value). Lets the operator fix
+  // the baseline when the auto-read is off, so +/- then work reliably.
+  const commitEdit = (i: number) => {
+    const v = parseInt(editVal, 10);
+    setEditingEl(null);
+    if (!isNaN(v) && v >= 0 && v !== lengths[i]) setLen(i, v);
+  };
+  const dirs: [number, string][] = [[0, 'N'], [1, '180°'], [2, t('station.bi')]];
+  return (
+    <div className="rounded-xl border border-border bg-card shadow-sm overflow-hidden h-full flex flex-col min-h-0">
+      <div className="flex items-center gap-2 px-2 py-1.5 border-b border-border/60 bg-muted/30 shrink-0">
+        <AntennaIcon className="size-4 text-primary" />
+        <div className="min-w-0">
+          <div className="text-sm font-semibold truncate">{isUB ? 'Ultrabeam' : 'SteppIR'}</div>
+          {ant.frequency > 0 && <div className="text-[10px] text-muted-foreground font-mono">{(ant.frequency / 1000).toFixed(3)} MHz</div>}
+        </div>
+        {ant.moving && <span className="ml-auto text-[10px] font-semibold text-warning animate-pulse">{t('station.moving')}</span>}
+        <span className={cn('size-2 rounded-full shrink-0', ant.moving ? '' : 'ml-auto', ant.connected ? 'bg-success' : 'bg-muted-foreground/40')}
+          title={ant.connected ? t('station.online') : t('station.offline')} />
+        {onClose && (
+          <button type="button" onClick={onClose} title={t('station.hideWidget')}
+            className="text-muted-foreground hover:text-foreground shrink-0">
+            <X className="size-3.5" />
+          </button>
+        )}
+      </div>
+      <div className="p-2 space-y-2 flex-1 min-h-0 overflow-auto">
+        <div>
+          {/* No heading: N / 180° / Bi say what they are, and in a docked widget
+              a line of height costs more than the word explains. */}
+          <div className="flex gap-1">
+            {dirs.map(([d, lbl]) => (
+              <button key={d} type="button" disabled={!ant.connected}
+                onClick={() => run(SetUltrabeamDirection(d))}
+                className={cn('flex-1 rounded-md border py-1 text-xs font-semibold transition-colors disabled:opacity-40',
+                  ant.direction === d ? 'bg-primary text-primary-foreground border-primary' : 'border-border hover:bg-muted')}>
+                {lbl}
+              </button>
+            ))}
+          </div>
+        </div>
+        {/* Bands, then a nudge, then tracking — in the order an operator uses
+            them: get to the band, fine-tune inside it, decide whether the
+            antenna should follow the rig from here. */}
+        <div>
+          <div className="text-[10px] font-semibold uppercase tracking-wider text-muted-foreground mb-0.5">{t('station.bands')}</div>
+          <div className="grid grid-cols-5 gap-1">
+            {(ant.bands ?? []).map((b: string) => {
+              // Where this band tunes is resolved by the backend — the operator's
+              // per-band choice from Settings, or the default. ANT_BAND_KHZ is only
+              // the floor for a status poll that hasn't landed yet.
+              const khz = ant.band_freqs?.[b] || ANT_BAND_KHZ[b];
+              if (!khz) return null;
+              // "On this band" from the antenna's own frequency, not the rig's:
+              // the widget must show where the ANTENNA is, which is the whole
+              // reason for tuning it by hand.
+              const here = ant.frequency > 0 && bandOfKHz(ant.frequency) === b;
+              return (
+                <button key={b} type="button" disabled={!ant.connected}
+                  onClick={() => run(MotorTuneKHz(khz))}
+                  title={`${(khz / 1000).toFixed(3)} MHz`}
+                  className={cn('rounded-md border py-0.5 text-[11px] font-mono font-semibold transition-colors disabled:opacity-40',
+                    here ? 'bg-primary text-primary-foreground border-primary' : 'border-border hover:bg-muted')}>
+                  {b}
+                </button>
+              );
+            })}
+          </div>
+        </div>
+
+        <div className="flex items-center gap-1">
+          <button type="button" disabled={!ant.connected}
+            onClick={() => run(MotorNudgeKHz(-NUDGE_KHZ))}
+            title={t('station.nudgeDown', { n: NUDGE_KHZ })}
+            className="flex-1 flex items-center justify-center gap-1 rounded-md border border-border py-1 text-xs font-semibold hover:bg-muted disabled:opacity-40">
+            <ChevronDown className="size-3.5" /> {NUDGE_KHZ}
+          </button>
+          <button type="button" disabled={!ant.connected}
+            onClick={() => run(MotorNudgeKHz(NUDGE_KHZ))}
+            title={t('station.nudgeUp', { n: NUDGE_KHZ })}
+            className="flex-1 flex items-center justify-center gap-1 rounded-md border border-border py-1 text-xs font-semibold hover:bg-muted disabled:opacity-40">
+            <ChevronUp className="size-3.5" /> {NUDGE_KHZ}
+          </button>
+        </div>
+
+        {/* Tracking. Here rather than only in Settings because it is an operating
+            decision — off to park the antenna, on to resume — not something set
+            up once. Mode and step only show when tracking is on: settings for
+            something switched off are questions the operator cannot act on. And
+            the step only shows in step mode, where it is the one thing it means. */}
+        {!essentialsOnly && (
+        <div className="space-y-1.5">
+          <div className="flex items-center gap-2">
+            <button type="button"
+              onClick={() => run(SetMotorFollow(!ant.follow, 0, ''))}
+              className={cn('flex-1 rounded-md border py-1 text-xs font-semibold transition-colors',
+                ant.follow ? 'bg-success-muted text-success-muted-foreground border-success-border' : 'border-border hover:bg-muted')}>
+              {ant.follow ? t('station.trackOn') : t('station.trackOff')}
+            </button>
+            {ant.follow && (ant.track_mode || 'step') === 'step' && (
+              <select
+                value={String(ant.step_khz || 50)}
+                onChange={(e) => run(SetMotorFollow(true, parseInt(e.target.value, 10), ''))}
+                className="h-[30px] rounded-md border border-border bg-background px-1 text-xs font-mono"
+                title={t('station.trackStepTip')}
+              >
+                {[25, 50, 100].map((s) => <option key={s} value={s}>{s} kHz</option>)}
+              </select>
+            )}
+          </div>
+          {ant.follow && (
+            <select
+              value={ant.track_mode || 'step'}
+              onChange={(e) => run(SetMotorFollow(true, 0, e.target.value))}
+              className="w-full h-[30px] rounded-md border border-border bg-background px-1.5 text-xs"
+              title={t('station.trackModeTip')}
+            >
+              <option value="always" title={t('station.trackAlwaysTip')}>{t('station.trackAlways')}</option>
+              <option value="step" title={t('station.trackStepTipMode')}>{t('station.trackStep')}</option>
+              <option value="band" title={t('station.trackBandTip')}>{t('station.trackBand')}</option>
+            </select>
+          )}
+        </div>
+        )}
+
+        <button type="button" disabled={!ant.connected}
+          onClick={() => run(UltrabeamRetract())}
+          className="w-full flex items-center justify-center gap-1.5 rounded-md border border-warning-border bg-warning-muted text-warning-muted-foreground py-1 text-xs font-semibold hover:brightness-95 disabled:opacity-40">
+          <ArrowDownToLine className="size-3.5" /> {t('station.retract')}
+        </button>
+
+        {isUB && !essentialsOnly && (
+          <div>
+            <div className="flex items-center gap-2 mb-1.5">
+              <span className="text-[10px] font-semibold uppercase tracking-wider text-muted-foreground">{t('station.elements')}</span>
+              <button type="button" onClick={readLengths} disabled={!ant.connected || reading}
+                className="text-[10px] text-primary hover:underline inline-flex items-center gap-1 disabled:opacity-40" title={t('station.readLengths')}>
+                <RefreshCw className={cn('size-3', reading && 'animate-spin')} /> {t('station.read')}
+              </button>
+            </div>
+            {lengths.length === 0 ? (
+              <p className="text-[11px] text-muted-foreground">{t('station.noLengths')}</p>
+            ) : (
+              <div className="space-y-1.5">
+                {/* The READ_BANDS reply is undocumented and its 16-bit parse picks
+                    up structural bytes past the real data (varying by band), which
+                    made 6+ bogus "elements" appear. Ultrabeam beams are 3-element,
+                    and ModifyElement addresses elements 0..2 — so show just those. */}
+                {lengths.map((mm, i) => ({ mm, i })).slice(0, 3).map(({ mm, i }) => (
+                  <div key={i} className="flex items-center gap-2">
+                    <span className="text-xs w-20 shrink-0 text-muted-foreground truncate">{elementName(i, t)}</span>
+                    <button type="button" disabled={!ant.connected || busyEl !== null}
+                      onClick={() => nudge(i, -ELEMENT_STEP)}
+                      className="flex items-center justify-center size-7 rounded-md border border-border hover:bg-muted disabled:opacity-40 shrink-0">
+                      <Minus className="size-3.5" />
+                    </button>
+                    {editingEl === i ? (
+                      <input autoFocus type="number" value={editVal}
+                        onChange={(e) => setEditVal(e.target.value)}
+                        onBlur={() => commitEdit(i)}
+                        onKeyDown={(e) => { if (e.key === 'Enter') commitEdit(i); if (e.key === 'Escape') setEditingEl(null); }}
+                        className="text-sm font-mono font-bold flex-1 min-w-0 text-center tabular-nums bg-transparent border border-primary rounded px-1" />
+                    ) : (
+                      <span className="text-sm font-mono font-bold flex-1 min-w-0 text-center tabular-nums cursor-pointer hover:underline"
+                        title={t('station.setExactLen')}
+                        onClick={() => { setEditingEl(i); setEditVal(String(mm)); }}>
+                        {busyEl === i ? <Loader2 className="size-3.5 animate-spin inline" /> : `${mm} mm`}
+                      </span>
+                    )}
+                    <button type="button" disabled={!ant.connected || busyEl !== null}
+                      onClick={() => nudge(i, ELEMENT_STEP)}
+                      className="flex items-center justify-center size-7 rounded-md border border-border hover:bg-muted disabled:opacity-40 shrink-0">
+                      <Plus className="size-3.5" />
+                    </button>
+                  </div>
+                ))}
+              </div>
+            )}
+            <p className="text-[10px] text-muted-foreground mt-1">{t('station.elementsHint')}</p>
+          </div>
+        )}
+        {err && <div className="text-[11px] text-destructive break-words">{err}</div>}
+      </div>
+    </div>
+  );
+}

frontend/src/components/NetControlPanel.tsx

@@ -49,6 +49,7 @@ type QSOMenuHandlers = {
   onUpdateFromCty?: (ids: number[]) => void;
   onUpdateFromQRZ?: (ids: number[]) => void;
   onUpdateFromClublog?: (ids: number[]) => void;
+  onUpdateCountyFromULS?: (ids: number[]) => void;
   onSendTo?: (service: string, ids: number[]) => void;
   onSendRecording?: (ids: number[]) => void;
   onSendEQSL?: (ids: number[]) => void;

frontend/src/components/QSLManagerModal.tsx

@@ -8,7 +8,7 @@ import {
   Select, SelectTrigger, SelectValue, SelectContent, SelectItem,
 } from '@/components/ui/select';
 import { cn } from '@/lib/utils';
-import { FindQSOsForUpload, UploadQSOsManual, DownloadConfirmations, SyncPOTAHunterLog, ListQSO, BulkUpdateQSL, UploadCallsign, GetSlotStats } from '../../wailsjs/go/main/App';
+import { FindQSOsForUpload, UploadQSOsManual, DownloadConfirmations, CancelConfirmations, SyncPOTAHunterLog, ListQSO, BulkUpdateQSL, UploadCallsign, GetSlotStats } from '../../wailsjs/go/main/App';
 import { Input } from '@/components/ui/input';
 import { RecentQSOsGrid } from '@/components/RecentQSOsGrid';
 import { EventsOn } from '../../wailsjs/runtime/runtime';
@@ -54,12 +54,14 @@ const QSL_STATUSES = [
   { v: 'I', label: 'qslm.ignore' },
 ];
 
-// QSL routing methods for the paper-QSL "Via" dropdown (was free text).
+// QSL routing methods for the paper-QSL route dropdowns, one per direction.
+// These are the ADIF QSL Via enumeration (B/D/E) and go to QSL_SENT_VIA and
+// QSL_RCVD_VIA — NOT to QSL_VIA, which holds the manager's callsign.
 const QSL_VIA_OPTIONS = [
   { v: '_', label: 'qslm.leave' },
-  { v: 'Bureau', label: 'qslm.viaBureau' },
+  { v: 'B', label: 'qslm.viaBureau' },
-  { v: 'Direct', label: 'qslm.viaDirect' },
+  { v: 'D', label: 'qslm.viaDirect' },
-  { v: 'Electronic', label: 'qslm.viaElectronic' },
+  { v: 'E', label: 'qslm.viaElectronic' },
 ];
 
 // Maps a service value → its i18n label key (only for services with
@@ -109,7 +111,38 @@ export function fmtQslDate(s?: string): string {
 
 // QSL Manager as an in-app tab panel: upload logged QSOs to online logbooks
 // and download confirmations, while the rest of the app stays usable.
-export function QSLManagerPanel({ onEditQSO }: { onEditQSO?: (id: number) => void } = {}) {
+// GridActions are the row actions the context menu offers, forwarded straight to
+// whichever grid this panel is showing.
+//
+// The FILTERED exports are deliberately absent. "Export everything the filter
+// matches" means the Recent-QSOs filter, and the rows here come from a different
+// query entirely — offering it would export something other than what is on the
+// screen, which is the one thing an export must never do. Selection-based
+// exports have no such ambiguity: the ids are the rows you ticked.
+export type GridActions = {
+  onUpdateFromCty?: (ids: number[]) => void;
+  onUpdateFromQRZ?: (ids: number[]) => void;
+  onUpdateFromClublog?: (ids: number[]) => void;
+  onUpdateCountyFromULS?: (ids: number[]) => void;
+  onSendTo?: (service: string, ids: number[]) => void;
+  onSendRecording?: (ids: number[]) => void;
+  onSendEQSL?: (ids: number[]) => void;
+  onBulkEdit?: (ids: number[]) => void;
+  onExportSelected?: (ids: number[]) => void;
+  onExportSelectedFields?: (ids: number[]) => void;
+  onExportCabrilloSelected?: (ids: number[]) => void;
+  onDelete?: (ids: number[]) => void;
+};
+
+export function QSLManagerPanel({ onEditQSO, actions, paperRequest }: {
+  onEditQSO?: (id: number) => void;
+  actions?: GridActions;
+  // A callsign to open the Paper QSL view on, sent from elsewhere in the app
+  // (the awards grid). Carries a counter rather than being a bare string: the
+  // panel is force-mounted and keeps its state, so asking twice for the SAME
+  // callsign has to be two requests, not one unchanged prop.
+  paperRequest?: { call: string; n: number };
+} = {}) {
   const { t } = useI18n();
   const [service, setService] = useState('lotw');
   // The callsign this profile signs/uploads/downloads as for the selected
@@ -120,6 +153,10 @@ export function QSLManagerPanel({ onEditQSO }: { onEditQSO?: (id: number) => voi
     if (service === 'pota' || service === 'paper') { setUploadCall(''); return; }
     UploadCallsign(service).then((c) => setUploadCall(c || '')).catch(() => setUploadCall(''));
   }, [service]);
+  // Closing the QSL Manager (the tab's ×) unmounts this panel — cancel any download
+  // still running so a slow QRZ/LoTW sync doesn't keep going in the background and
+  // bleed its log into the next one.
+  useEffect(() => () => { CancelConfirmations().catch(() => {}); }, []);
   const [potaSyncing, setPotaSyncing] = useState(false);
   const [potaRes, setPotaRes] = useState<POTASync | null>(null);
   const [potaErr, setPotaErr] = useState('');
@@ -145,7 +182,8 @@ export function QSLManagerPanel({ onEditQSO }: { onEditQSO?: (id: number) => voi
   const [qslSent, setQslSent] = useState('_');
   const [qslRcvdDate, setQslRcvdDate] = useState('');
   const [qslSentDate, setQslSentDate] = useState('');
-  const [qslVia, setQslVia] = useState('_');
+  const [qslVia, setQslVia] = useState('_');       // how the card was SENT
+  const [qslRcvdVia, setQslRcvdVia] = useState('_'); // how it CAME BACK
   const [qslNotes, setQslNotes] = useState('');
   const [qslComment, setQslComment] = useState('');
 
@@ -165,6 +203,27 @@ export function QSLManagerPanel({ onEditQSO }: { onEditQSO?: (id: number) => voi
   }, [paperCall]);
 
 
+  // Honour an incoming request: switch to Paper QSL, fill the callsign, search.
+  // The search runs from the effect below once paperCall has actually changed —
+  // searchPaper closes over paperCall, so calling it here would search the
+  // PREVIOUS callsign.
+  // The pending request's callsign, so the search fires for THAT callsign and
+  // for nothing else: the effect below also wakes on every keystroke in the
+  // field, and searching on each of them would query the log letter by letter.
+  const pendingPaperCall = useRef('');
+  useEffect(() => {
+    const call = paperRequest?.call?.trim().toUpperCase();
+    if (!call) return;
+    setService('paper');
+    setPaperCall(call);
+    pendingPaperCall.current = call;
+  }, [paperRequest?.call, paperRequest?.n]);
+  useEffect(() => {
+    if (!pendingPaperCall.current || paperCall !== pendingPaperCall.current) return;
+    pendingPaperCall.current = '';
+    searchPaper();
+  }, [paperCall, searchPaper]);
+
   async function applyPaper() {
     const ids = paperRows.filter((r) => paperSel.has(r.id)).map((r) => r.id);
     if (ids.length === 0) return;
@@ -177,6 +236,7 @@ export function QSLManagerPanel({ onEditQSO }: { onEditQSO?: (id: number) => voi
         sent_date: ymd(qslSentDate),
         rcvd_date: ymd(qslRcvdDate),
         via: qslVia === '_' ? '' : qslVia,
+        rcvd_via: qslRcvdVia === '_' ? '' : qslRcvdVia,
         notes: qslNotes,
         comment: qslComment,
       } as any);
@@ -435,6 +495,8 @@ export function QSLManagerPanel({ onEditQSO }: { onEditQSO?: (id: number) => voi
                 total={paperRows.length}
                 selectAllSignal={paperSelAllSig}
                 onRowSelected={(ids) => setPaperSel(new Set(ids))}
+                {...actions}
+                onRowDoubleClicked={onEditQSO ? (q) => onEditQSO(q.id as number) : undefined}
               />
             </div>
           )
@@ -541,6 +603,8 @@ export function QSLManagerPanel({ onEditQSO }: { onEditQSO?: (id: number) => voi
               total={rows.length}
               selectAllSignal={uploadSelAllSig}
               onRowSelected={onUploadRowSelected}
+              {...actions}
+              onRowDoubleClicked={onEditQSO ? (q) => onEditQSO(q.id as number) : undefined}
             />
           </div>
         )}
@@ -549,6 +613,10 @@ export function QSLManagerPanel({ onEditQSO }: { onEditQSO?: (id: number) => voi
       {/* Paper-QSL apply form */}
       {service === 'paper' && (
         <div className="flex items-end flex-wrap gap-3 px-3 py-2 border-t border-border bg-muted/20 shrink-0">
+          {/* Each direction carries its own route, and each sits with the status
+              and date it belongs to. A stack confirmed in one go usually arrived
+              the same way — a bureau delivery is exactly that — which is why the
+              route belongs on this form and not one QSO at a time in the editor. */}
           <div className="flex flex-col gap-1">
             <label className="text-[10px] uppercase tracking-wider text-muted-foreground">{t('qslm.qslReceived')}</label>
             <div className="flex gap-1.5">
@@ -557,6 +625,10 @@ export function QSLManagerPanel({ onEditQSO }: { onEditQSO?: (id: number) => voi
                 <SelectContent>{QSL_STATUSES.map((s) => <SelectItem key={s.v} value={s.v}>{t(s.label)}</SelectItem>)}</SelectContent>
               </Select>
               <Input type="date" className="h-8 w-36" value={qslRcvdDate} onChange={(e) => setQslRcvdDate(e.target.value)} title={t('qslm.qslRcvdDateTitle')} />
+              <Select value={qslRcvdVia} onValueChange={setQslRcvdVia}>
+                <SelectTrigger className="h-8 w-32" title={t('qslm.rcvdViaTitle')}><SelectValue /></SelectTrigger>
+                <SelectContent>{QSL_VIA_OPTIONS.map((o) => <SelectItem key={o.v} value={o.v}>{t(o.label)}</SelectItem>)}</SelectContent>
+              </Select>
             </div>
           </div>
           <div className="flex flex-col gap-1">
@@ -567,15 +639,12 @@ export function QSLManagerPanel({ onEditQSO }: { onEditQSO?: (id: number) => voi
                 <SelectContent>{QSL_STATUSES.map((s) => <SelectItem key={s.v} value={s.v}>{t(s.label)}</SelectItem>)}</SelectContent>
               </Select>
               <Input type="date" className="h-8 w-36" value={qslSentDate} onChange={(e) => setQslSentDate(e.target.value)} title={t('qslm.qslSentDateTitle')} />
+              <Select value={qslVia} onValueChange={setQslVia}>
+                <SelectTrigger className="h-8 w-32" title={t('qslm.sentViaTitle')}><SelectValue /></SelectTrigger>
+                <SelectContent>{QSL_VIA_OPTIONS.map((o) => <SelectItem key={o.v} value={o.v}>{t(o.label)}</SelectItem>)}</SelectContent>
+              </Select>
             </div>
           </div>
-          <div className="flex flex-col gap-1">
-            <label className="text-[10px] uppercase tracking-wider text-muted-foreground">{t('qslm.via')}</label>
-            <Select value={qslVia} onValueChange={setQslVia}>
-              <SelectTrigger className="h-8 w-32"><SelectValue /></SelectTrigger>
-              <SelectContent>{QSL_VIA_OPTIONS.map((o) => <SelectItem key={o.v} value={o.v}>{t(o.label)}</SelectItem>)}</SelectContent>
-            </Select>
-          </div>
           <div className="flex flex-col gap-1">
             <label className="text-[10px] uppercase tracking-wider text-muted-foreground">{t('qslm.notes')}</label>
             <Input className="h-8 w-40" value={qslNotes} onChange={(e) => setQslNotes(e.target.value)} placeholder={t('qslm.notesPlaceholder')} />

frontend/src/components/QSOContextMenu.tsx

@@ -1,5 +1,5 @@
-import { useEffect } from 'react';
+import { useEffect, useLayoutEffect, useRef, useState } from 'react';
-import { Globe2, RefreshCw, Upload, BadgeCheck, Mail, FileDown, PencilLine, Trash2 } from 'lucide-react';
+import { Globe2, RefreshCw, Upload, BadgeCheck, Mail, FileDown, PencilLine, Trash2, MapPin } from 'lucide-react';
 import { useI18n } from '@/lib/i18n';
 
 export type QSOMenuState = { x: number; y: number; ids: number[] } | null;
@@ -7,9 +7,12 @@ export type QSOMenuState = { x: number; y: number; ids: number[] } | null;
 type Props = {
   menu: QSOMenuState;
   onClose: () => void;
-  onUpdateFromCty: (ids: number[]) => void;
+  onUpdateFromCty?: (ids: number[]) => void;
-  onUpdateFromQRZ: (ids: number[]) => void;
+  onUpdateFromQRZ?: (ids: number[]) => void;
   onUpdateFromClublog?: (ids: number[]) => void;
+  // Only passed once the offline US county database has been downloaded —
+  // an entry that can only ever answer "no database" is not worth a line here.
+  onUpdateCountyFromULS?: (ids: number[]) => void;
   onSendTo?: (service: string, ids: number[]) => void;
   onSendRecording?: (ids: number[]) => void;
   onSendEQSL?: (ids: number[]) => void;
@@ -36,8 +39,14 @@ const UPLOAD_TARGETS: { service: string; name: string }[] = [
 // or picks a command. (We deliberately do NOT close on scroll/resize: the QSO
 // list auto-refreshes and AG Grid fires internal scroll events on refresh,
 // which used to dismiss the menu the instant it appeared.)
-export function QSOContextMenu({ menu, onClose, onUpdateFromCty, onUpdateFromQRZ, onUpdateFromClublog, onSendTo, onSendRecording, onSendEQSL, onBulkEdit, onExportSelected, onExportSelectedFields, onExportFiltered, onExportCabrilloSelected, onExportCabrilloFiltered, onDelete }: Props) {
+export function QSOContextMenu({ menu, onClose, onUpdateFromCty, onUpdateFromQRZ, onUpdateFromClublog, onUpdateCountyFromULS, onSendTo, onSendRecording, onSendEQSL, onBulkEdit, onExportSelected, onExportSelectedFields, onExportFiltered, onExportCabrilloSelected, onExportCabrilloFiltered, onDelete }: Props) {
   const { t } = useI18n();
+  const boxRef = useRef<HTMLDivElement>(null);
+  // Starts at the cursor; the layout effect corrects it once the real size is
+  // known. Rendering at the cursor first avoids a visible jump for the common
+  // case where it already fits.
+  const [pos, setPos] = useState({ x: 0, y: 0 });
+  useEffect(() => { if (menu) setPos({ x: menu.x, y: menu.y }); }, [menu]);
   useEffect(() => {
     if (!menu) return;
     const close = () => onClose();
@@ -50,35 +59,67 @@ export function QSOContextMenu({ menu, onClose, onUpdateFromCty, onUpdateFromQRZ
     };
   }, [menu, onClose]);
 
+  // Position AFTER measuring.
+  //
+  // The menu used to be clamped against a guessed height — 230 px when the
+  // upload submenu was present, 110 otherwise. It is far taller than that with
+  // a selection, so right-clicking near the bottom of the window cut half the
+  // entries off. Its height also depends on which actions the caller passes, so
+  // no constant can be right for long.
+  //
+  // Measured instead: if it does not fit below the cursor it is placed above,
+  // and failing that pinned to the top with its own scrollbar.
+  useLayoutEffect(() => {
+    if (!menu || !boxRef.current) return;
+    const r = boxRef.current.getBoundingClientRect();
+    const pad = 6;
+    let x = menu.x;
+    let y = menu.y;
+    if (x + r.width > window.innerWidth - pad) {
+      x = Math.max(pad, window.innerWidth - r.width - pad);
+    }
+    if (y + r.height > window.innerHeight - pad) {
+      // Above the cursor, if there is room there.
+      y = menu.y - r.height >= pad ? menu.y - r.height : Math.max(pad, window.innerHeight - r.height - pad);
+    }
+    setPos({ x, y });
+  }, [menu, onSendTo]);
+
   if (!menu) return null;
   const n = menu.ids.length;
-  // Keep the menu on-screen near the cursor.
-  const x = Math.min(menu.x, window.innerWidth - 248);
-  const y = Math.min(menu.y, window.innerHeight - (onSendTo ? 230 : 110));
 
   return (
     <div
-      className="fixed z-[200] min-w-[240px] rounded-md border border-border bg-popover shadow-lg py-1 text-sm"
+      ref={boxRef}
-      style={{ left: x, top: y }}
+      className="fixed z-[200] min-w-[240px] max-h-[85vh] overflow-y-auto rounded-md border border-border bg-popover shadow-lg py-1 text-sm"
+      style={{ left: pos.x, top: pos.y }}
       onMouseDown={(e) => e.stopPropagation()}
     >
       <div className="px-3 py-1 text-[11px] uppercase tracking-wider text-muted-foreground">
         {t('qctx.selected', { n })}
       </div>
-      <button
+      {/* Conditional like every other entry. These two were drawn
-        className="flex w-full items-center gap-2 px-3 py-1.5 text-left hover:bg-accent/50"
+          unconditionally, and the grid passes them through an arrow that calls
-        onClick={() => { onUpdateFromCty(menu.ids); onClose(); }}
+          an optional handler — so in a grid that wires neither (the QSL
-      >
+          Manager) both appeared and did precisely nothing when clicked. */}
-        <Globe2 className="size-4 text-primary" />
+      {onUpdateFromCty && (
-        <span>{t('qctx.fixCountry')}</span>
+        <button
-      </button>
+          className="flex w-full items-center gap-2 px-3 py-1.5 text-left hover:bg-accent/50"
-      <button
+          onClick={() => { onUpdateFromCty(menu.ids); onClose(); }}
-        className="flex w-full items-center gap-2 px-3 py-1.5 text-left hover:bg-accent/50"
+        >
-        onClick={() => { onUpdateFromQRZ(menu.ids); onClose(); }}
+          <Globe2 className="size-4 text-primary" />
-      >
+          <span>{t('qctx.fixCountry')}</span>
-        <RefreshCw className="size-4 text-info" />
+        </button>
-        <span>{t('qctx.updateQrz')}</span>
+      )}
-      </button>
+      {onUpdateFromQRZ && (
+        <button
+          className="flex w-full items-center gap-2 px-3 py-1.5 text-left hover:bg-accent/50"
+          onClick={() => { onUpdateFromQRZ(menu.ids); onClose(); }}
+        >
+          <RefreshCw className="size-4 text-info" />
+          <span>{t('qctx.updateQrz')}</span>
+        </button>
+      )}
       {onUpdateFromClublog && (
         <button
           className="flex w-full items-center gap-2 px-3 py-1.5 text-left hover:bg-accent/50"
@@ -88,6 +129,16 @@ export function QSOContextMenu({ menu, onClose, onUpdateFromCty, onUpdateFromQRZ
           <span>{t('qctx.updateClublog')}</span>
         </button>
       )}
+      {onUpdateCountyFromULS && (
+        <button
+          className="flex w-full items-center gap-2 px-3 py-1.5 text-left hover:bg-accent/50"
+          onClick={() => { onUpdateCountyFromULS(menu.ids); onClose(); }}
+          title={t('qctx.updateUlsCountyTitle')}
+        >
+          <MapPin className="size-4 text-info" />
+          <span>{t('qctx.updateUlsCounty')}</span>
+        </button>
+      )}
 
       {(onSendRecording || onSendEQSL) && (
         <>

frontend/src/components/QSOEditModal.tsx

@@ -1,6 +1,6 @@
 import { useEffect, useMemo, useRef, useState } from 'react';
 import { Trash2, Search, Loader2, CalendarDays } from 'lucide-react';
-import { LookupCallsign, LookupCallsignFresh, DXCCForCountry, GetAwardDefs, ComputeQSOAwardRefs, GetListsSettings } from '../../wailsjs/go/main/App';
+import { LookupCallsign, LookupCallsignFresh, DXCCForCountry, GetAwardDefs, ComputeQSOAwardRefs, GetListsSettings, OpenExternalURL, SetOpsLogQSLReceived } from '../../wailsjs/go/main/App';
 import { rstOptions, type RSTLists } from '@/lib/rst';
 import { AwardRefSelector } from '@/components/AwardRefSelector';
 import { AdifExtrasEditor } from '@/components/AdifExtrasEditor';
@@ -22,6 +22,7 @@ import { Combobox } from '@/components/ui/combobox';
 import { cn } from '@/lib/utils';
 import { flagURL } from '@/lib/flags';
 import { useI18n } from '@/lib/i18n';
+import { titleCase, sentenceCase } from '@/lib/textCase';
 import type { QSOForm } from '@/types';
 
 type QSO = QSOForm;
@@ -40,9 +41,14 @@ function pfxOf(call: string): string {
 const BANDS = ['2190m','630m','160m','80m','60m','40m','30m','20m','17m','15m','12m','10m','6m','4m','2m','1.25m','70cm','33cm','23cm','13cm','9cm','6cm','3cm','1.25cm','6mm','4mm','2.5mm','2mm','1mm'];
 const MODES = ['SSB','CW','FT8','FT4','RTTY','PSK31','AM','FM','DIGITALVOICE','MFSK','OLIVIA','JS8','JT65','JT9'];
 // label holds an i18n key (resolved with t() at render time).
+// V is in the list because the log HOLDS it: a LoTW download writes "verified"
+// rather than "yes". A dropdown without it renders a verified contact as blank,
+// which reads as "nothing recorded" — and the operator's next click would replace
+// the strongest confirmation they have with whatever they picked instead.
 const QSL_STATUSES = [
   { value: '_', label: 'qedit.qslDash' },
   { value: 'Y', label: 'qedit.qslYes' },
+  { value: 'V', label: 'qedit.qslVerified' },
   { value: 'N', label: 'qedit.qslNo'  },
   { value: 'R', label: 'qedit.qslRequested' },
   { value: 'I', label: 'qedit.qslIgnore' },
@@ -56,10 +62,12 @@ type ConfDef = {
   key: string; label: string;
   sent?: keyof QSOForm; rcvd?: keyof QSOForm;
   sentDate?: keyof QSOForm; rcvdDate?: keyof QSOForm;
-  via?: keyof QSOForm;
+  // How the card travelled, each way (ADIF QSL_SENT_VIA / QSL_RCVD_VIA). Paper
+  // only — the electronic channels below ARE the route.
+  sentVia?: keyof QSOForm; rcvdVia?: keyof QSOForm;
 };
 const CONFIRMATIONS: ConfDef[] = [
-  { key: 'QSL',     label: 'QSL (paper)', sent: 'qsl_sent',  rcvd: 'qsl_rcvd',  sentDate: 'qsl_sent_date',  rcvdDate: 'qsl_rcvd_date',  via: 'qsl_via' },
+  { key: 'QSL',     label: 'QSL (paper)', sent: 'qsl_sent',  rcvd: 'qsl_rcvd',  sentDate: 'qsl_sent_date',  rcvdDate: 'qsl_rcvd_date',  sentVia: 'qsl_sent_via', rcvdVia: 'qsl_rcvd_via' },
   { key: 'LOTW',    label: 'LoTW',        sent: 'lotw_sent', rcvd: 'lotw_rcvd', sentDate: 'lotw_sent_date', rcvdDate: 'lotw_rcvd_date' },
   { key: 'EQSL',    label: 'eQSL',        sent: 'eqsl_sent', rcvd: 'eqsl_rcvd', sentDate: 'eqsl_sent_date', rcvdDate: 'eqsl_rcvd_date' },
   { key: 'QRZCOM',  label: 'QRZ.com',     sent: 'qrzcom_qso_upload_status' as any, sentDate: 'qrzcom_qso_upload_date' as any, rcvd: 'qrzcom_qso_download_status' as any, rcvdDate: 'qrzcom_qso_download_date' as any },
@@ -72,6 +80,11 @@ const CONF_LABEL_KEYS: Record<string, string> = {
   QSL: 'qedit.confQslPaper',
 };
 
+// OpsLog's own card. Kept out of CONFIRMATIONS on purpose — that list maps QSO
+// columns and this channel is backed by ADIF extras — but it still belongs in
+// the channel picker and the status table alongside the rest.
+const OPSLOG_CONF = 'OPSLOG';
+
 // Colour-coded status cell for the confirmation grid.
 function StatusCell({ value }: { value?: string }) {
   const { t } = useI18n();
@@ -91,9 +104,14 @@ function StatusCell({ value }: { value?: string }) {
   //                       every row; painting that orange (as it used to be, in the
   //                       same orange as Requested) made the table shout about a
   //                       non-problem and told you nothing apart.
+  //   Verified  green   — ADIF's V: confirmed AND validated by the awarding body.
+  //                       It is what a LoTW download writes, and this table used
+  //                       to fall through to "No" for it — reporting a verified
+  //                       contact as unconfirmed, in the one place an operator
+  //                       goes to check.
   //   Ignore    dashed  — deliberately excluded, on purpose.
-  const label = v === 'Y' ? t('qedit.qslYes') : v === 'R' ? t('qedit.qslRequested') : v === 'I' ? t('qedit.qslIgnore') : v === 'M' ? t('qedit.statusModified') : t('qedit.qslNo');
+  const label = v === 'Y' ? t('qedit.qslYes') : v === 'V' ? t('qedit.qslVerified') : v === 'R' ? t('qedit.qslRequested') : v === 'I' ? t('qedit.qslIgnore') : v === 'M' ? t('qedit.statusModified') : t('qedit.qslNo');
-  const cls = v === 'Y' ? 'bg-success text-success-foreground border border-success'
+  const cls = v === 'Y' || v === 'V' ? 'bg-success text-success-foreground border border-success'
     : v === 'R' ? 'bg-info-muted text-info-muted-foreground border border-info-border'
     : v === 'M' ? 'bg-warning text-warning-foreground border border-warning'
     : v === 'I' ? 'bg-muted text-muted-foreground border border-dashed border-border italic'
@@ -210,6 +228,28 @@ function QslSelect({ value, onChange }: { value?: string; onChange: (v: string)
   );
 }
 
+// The ADIF QSL Via enumeration. M (manager) is import-only in the standard, so
+// it is not offered here — a file that arrives carrying it keeps it, and this
+// list is what an operator may choose.
+const QSL_VIA_CHOICES = [
+  { value: '_', label: 'qedit.qslDash' },
+  { value: 'B', label: 'qedit.viaBureau' },
+  { value: 'D', label: 'qedit.viaDirect' },
+  { value: 'E', label: 'qedit.viaElectronic' },
+];
+
+function QslViaSelect({ value, onChange }: { value?: string; onChange: (v: string) => void }) {
+  const { t } = useI18n();
+  return (
+    <Select value={value || '_'} onValueChange={(v) => onChange(v === '_' ? '' : v)}>
+      <SelectTrigger><SelectValue /></SelectTrigger>
+      <SelectContent>
+        {QSL_VIA_CHOICES.map((s) => <SelectItem key={s.value} value={s.value}>{t(s.label)}</SelectItem>)}
+      </SelectContent>
+    </Select>
+  );
+}
+
 export function QSOEditModal({ qso, onSave, onDelete, onClose, countries = [], bands, modes }: Props) {
   const { t } = useI18n();
   // Use the operator's configured band/mode lists (incl. custom ones like 13cm);
@@ -334,7 +374,10 @@ export function QSOEditModal({ qso, onSave, onDelete, onClose, countries = [], b
       // refreshes it. A cached answer from a thinner QRZ subscription (or any
       // stale row) otherwise stayed for its whole 30-day life and the button
       // appeared to do nothing.
-      const r: any = await LookupCallsignFresh(call);
+      // The QSO's OWN date: a ClubLog exception is resolved as of when the
+      // contact happened, not as of today. Re-looking-up a DXpedition contact
+      // months later must not move it to whatever the prefix means now.
+      const r: any = await LookupCallsignFresh(call, (dateOn || '').slice(0, 10));
       // The lookup WINS over what is in the record — that is the point of asking
       // for it. But an EMPTY result must never blank a good value: `??` only
       // guards against null, and Go marshals an unset string as "", so a QRZ
@@ -428,6 +471,26 @@ export function QSOEditModal({ qso, onSave, onDelete, onClose, countries = [], b
     [draft.extras],
   );
 
+  // OpsLog QSL "received" marker (ADIF extra). Drives the card's PSE/TNX stamp:
+  // received → TNX QSL (thanks for your card), otherwise PSE QSL (please send one).
+  // Saved with the normal Save via draft.extras.
+  const OPSLOG_QSL_RCVD = 'APP_OPSLOG_QSL_RCVD';
+  const qslReceived = !!String(draft.extras?.[OPSLOG_QSL_RCVD] ?? '').trim();
+  // Sent side, for the confirmations table. Two key names because the marker was
+  // renamed once and old QSOs still carry the first one — same test the Recent
+  // QSOs "OpsLog QSL" column makes.
+  const opslogQslSent = !!(draft.extras?.['APP_OPSLOG_QSL_SENT'] || draft.extras?.['APP_OPSLOG_QSL_CARD_SENT']);
+  const toggleQslReceived = (on: boolean) => {
+    // Reflect immediately in the draft (for the PSE/TNX indicator)…
+    const next = { ...(draft.extras ?? {}) };
+    if (on) next[OPSLOG_QSL_RCVD] = new Date().toISOString();
+    else delete next[OPSLOG_QSL_RCVD];
+    set('extras', next as any);
+    // …and persist right away with a targeted write that reliably sets OR clears
+    // the key (the modal's extras-merge on Save wouldn't clear a removed key).
+    if ((draft as any).id) SetOpsLogQSLReceived((draft as any).id, on).catch(() => {});
+  };
+
   return (
     <Dialog open onOpenChange={(o) => { if (!o) onClose(); }}>
       <DialogContent className="max-w-5xl max-h-[92vh] grid grid-rows-[auto_1fr_auto] gap-0 p-0">
@@ -466,7 +529,22 @@ export function QSOEditModal({ qso, onSave, onDelete, onClose, countries = [], b
               {/* Top: Callsign + RST + Fetch */}
               <div className="flex items-end gap-2 mb-3">
                 <div className="flex flex-col flex-1 min-w-0">
-                  <Label>{t('qedit.callsign')}</Label>
+                  <div className="flex items-center">
+                    <Label>{t('qedit.callsign')}</Label>
+                    {(draft.callsign ?? '').trim() && (
+                      <button
+                        type="button"
+                        title={t('qrz.openTitle', { call: (draft.callsign ?? '').trim().toUpperCase() })}
+                        onClick={() => {
+                          const c = (draft.callsign ?? '').trim().toUpperCase().split('/').map(encodeURIComponent).join('/');
+                          if (c) OpenExternalURL(`https://www.qrz.com/db/${c}`).catch((e: any) => setLocalErr(String(e?.message ?? e)));
+                        }}
+                        className="ml-auto shrink-0 inline-flex items-center gap-0.5 text-[9px] font-semibold normal-case tracking-wider text-primary hover:underline"
+                      >
+                        QRZ ↗
+                      </button>
+                    )}
+                  </div>
                   <Input className="font-mono text-lg font-bold tracking-wider uppercase h-10"
                     value={draft.callsign ?? ''} onChange={(e) => set('callsign', e.target.value)} />
                 </div>
@@ -483,7 +561,8 @@ export function QSOEditModal({ qso, onSave, onDelete, onClose, countries = [], b
               <div className="grid grid-cols-2 gap-x-6 gap-y-2.5">
                 {/* ── Left column ── */}
                 <div className="flex flex-col gap-2.5">
-                  <div><Label>{t('qedit.name')}</Label><Input value={draft.name ?? ''} onChange={(e) => set('name', e.target.value)} /></div>
+                  <div><Label>{t('qedit.name')}</Label><Input value={draft.name ?? ''} onChange={(e) => set('name', e.target.value)}
+                    onBlur={() => set('name', titleCase(draft.name ?? '') as any)} /></div>
                   <div className="flex items-center gap-2">
                     <Label className="w-20 shrink-0">{t('qedit.band')}</Label>
                     <Select value={draft.band || ''} onValueChange={(v) => set('band', v)}>
@@ -547,10 +626,13 @@ export function QSOEditModal({ qso, onSave, onDelete, onClose, countries = [], b
                   </div>
                   <div className="flex items-end gap-2">
                     <div className="flex flex-col flex-1"><Label>{t('qedit.grid')}</Label><Input value={draft.grid ?? ''} onChange={(e) => set('grid', e.target.value)} className="font-mono uppercase" /></div>
+                    <div className="flex flex-col w-24"><Label>{t('qedit.gridExt')}</Label><Input title={t('qedit.gridExtTip')} value={draft.gridsquare_ext ?? ''} onChange={(e) => set('gridsquare_ext', e.target.value)} className="font-mono uppercase" /></div>
                     <div className="flex flex-col w-24"><Label>PFX</Label><Input readOnly value={pfxOf(draft.callsign ?? '')} className="font-mono bg-muted/40" /></div>
                   </div>
-                  <div><Label>{t('qedit.comment')}</Label><Input value={draft.comment ?? ''} onChange={(e) => set('comment', e.target.value)} /></div>
+                  <div><Label>{t('qedit.comment')}</Label><Input value={draft.comment ?? ''} onChange={(e) => set('comment', e.target.value)}
-                  <div><Label>{t('qedit.note')}</Label><Textarea rows={3} value={draft.notes ?? ''} onChange={(e) => set('notes', e.target.value)} /></div>
+                    onBlur={() => set('comment', sentenceCase(draft.comment ?? '') as any)} /></div>
+                  <div><Label>{t('qedit.note')}</Label><Textarea rows={3} value={draft.notes ?? ''} onChange={(e) => set('notes', e.target.value)}
+                    onBlur={() => set('notes', sentenceCase(draft.notes ?? '') as any)} /></div>
                 </div>
               </div>
             </TabsContent>
@@ -571,7 +653,8 @@ export function QSOEditModal({ qso, onSave, onDelete, onClose, countries = [], b
                       </SelectContent>
                     </Select>
                   </div>
-                  <div><Label>QTH</Label><Input value={draft.qth ?? ''} onChange={(e) => set('qth', e.target.value)} /></div>
+                  <div><Label>QTH</Label><Input value={draft.qth ?? ''} onChange={(e) => set('qth', e.target.value)}
+                    onBlur={() => set('qth', titleCase(draft.qth ?? '') as any)} /></div>
                   <div><Label>{t('qedit.address')}</Label><Textarea rows={4} value={draft.address ?? ''} onChange={(e) => set('address', e.target.value)} /></div>
                 </div>
                 {/* Right column */}
@@ -581,8 +664,19 @@ export function QSOEditModal({ qso, onSave, onDelete, onClose, countries = [], b
                     <div className="flex flex-col flex-1"><Label>Lat</Label><Input type="number" step="0.000001" value={draft.lat ?? ''} onChange={(e) => set('lat', numOrUndef(e.target.value) as any)} className="font-mono" /></div>
                     <div className="flex flex-col flex-1"><Label>Lon</Label><Input type="number" step="0.000001" value={draft.lon ?? ''} onChange={(e) => set('lon', numOrUndef(e.target.value) as any)} className="font-mono" /></div>
                   </div>
-                  <div><Label>{t('qedit.qslMsg')}</Label><Input value={draft.qsl_msg ?? ''} onChange={(e) => set('qsl_msg', e.target.value)} /></div>
+                  {/* The OpsLog QSL marker used to sit here, under QSL Msg. It
-                  <div><Label>{t('qedit.qslVia')}</Label><Input value={draft.qsl_via ?? ''} onChange={(e) => set('qsl_via', e.target.value)} /></div>
+                      belongs with the other confirmation channels — see the QSL
+                      Info tab. */}
+                  <div>
+                    <Label>{t('qedit.qslMsg')}</Label>
+                    <Input value={draft.qsl_msg ?? ''} onChange={(e) => set('qsl_msg', e.target.value)} />
+                  </div>
+                  {/* The manager, and only the manager — ADIF QSL_VIA. How the
+                      card travelled is a separate field, on the QSL Info tab. */}
+                  <div>
+                    <Label>{t('qedit.qslVia')}</Label>
+                    <Input value={draft.qsl_via ?? ''} onChange={(e) => set('qsl_via', e.target.value)} placeholder={t('qedit.qslViaPlaceholder')} />
+                  </div>
                 </div>
               </div>
             </TabsContent>
@@ -629,25 +723,75 @@ export function QSOEditModal({ qso, onSave, onDelete, onClose, countries = [], b
                         <Label>{t('qedit.manageConf')}</Label>
                         <Select value={confSel} onValueChange={setConfSel}>
                           <SelectTrigger><SelectValue /></SelectTrigger>
-                          <SelectContent>{CONFIRMATIONS.map((c) => <SelectItem key={c.key} value={c.key}>{CONF_LABEL_KEYS[c.key] ? t(CONF_LABEL_KEYS[c.key]) : c.label}</SelectItem>)}</SelectContent>
+                          <SelectContent>
+                            {CONFIRMATIONS.map((c) => <SelectItem key={c.key} value={c.key}>{CONF_LABEL_KEYS[c.key] ? t(CONF_LABEL_KEYS[c.key]) : c.label}</SelectItem>)}
+                            {/* Listed here but NOT in CONFIRMATIONS: that table maps
+                                QSO columns, and this channel lives in the ADIF
+                                extras. It gets its own editor below rather than the
+                                generic sent/received/date grid, which has no field
+                                to bind to. */}
+                            <SelectItem value={OPSLOG_CONF}>{t('qedit.confOpsLog')}</SelectItem>
+                          </SelectContent>
                         </Select>
                       </div>
-                      <div className="grid grid-cols-2 gap-3">
+
-                        <div><Label>{t('qedit.sent')}</Label><QslSelect value={val(def.sent)} onChange={(v) => put(def.sent, v)} /></div>
+                      {confSel === OPSLOG_CONF ? (
-                        <div><Label>{t('qedit.received')}</Label>
+                        /* OpsLog's own card. "Sent" is stamped when the card
-                          {def.rcvd
+                           actually goes out, so it is shown, not offered: ticking
-                            ? <QslSelect value={val(def.rcvd)} onChange={(v) => put(def.rcvd, v)} />
+                           it by hand would record something that never happened.
-                            : <Input disabled value="—" />}
+                           "Received" drives the PSE/TNX stamp printed on the card,
+                           which is the whole reason the flag exists — hence the
+                           live indicator next to it. It writes immediately rather
+                           than on Save, because clearing an extras key would not
+                           survive the merge Save does. */
+                        <div className="space-y-3">
+                          <div className="grid grid-cols-2 gap-3">
+                            <div>
+                              <Label>{t('qedit.sent')}</Label>
+                              <Input disabled value={opslogQslSent ? t('qedit.qslYes') : t('qedit.qslNo')} />
+                            </div>
+                            <div>
+                              <Label>{t('qedit.received')}</Label>
+                              <label className="flex h-9 items-center gap-2 text-sm cursor-pointer">
+                                <Checkbox checked={qslReceived} onCheckedChange={(c) => toggleQslReceived(!!c)} />
+                                {t('qedit.qslReceived')}
+                              </label>
+                            </div>
+                          </div>
+                          <div className="flex items-center gap-2">
+                            <span className="text-[11px] font-mono px-1.5 py-0.5 rounded bg-muted text-muted-foreground">
+                              {qslReceived ? 'TNX QSL' : 'PSE QSL'}
+                            </span>
+                            <span className="text-[11px] text-muted-foreground">{t('qedit.pseTnxHint')}</span>
+                          </div>
+                          <p className="text-[11px] text-muted-foreground">{t('qedit.opslogSentHint')}</p>
                         </div>
-                        <div><Label>{t('qedit.dateSent')}</Label><AdifDateInput value={val(def.sentDate)} onChange={(v) => put(def.sentDate, v)} /></div>
+                      ) : (
-                        <div><Label>{t('qedit.dateReceived')}</Label><AdifDateInput value={val(def.rcvdDate)} onChange={(v) => put(def.rcvdDate, v)} disabled={!def.rcvdDate} /></div>
+                        <>
-                        {def.via && (
+                          <div className="grid grid-cols-2 gap-3">
-                          <div className="col-span-2"><Label>{t('qedit.via')}</Label><Input value={val(def.via)} onChange={(e) => put(def.via, e.target.value)} placeholder={t('qedit.viaPlaceholder')} /></div>
+                            <div><Label>{t('qedit.sent')}</Label><QslSelect value={val(def.sent)} onChange={(v) => put(def.sent, v)} /></div>
-                        )}
+                            <div><Label>{t('qedit.received')}</Label>
-                      </div>
+                              {def.rcvd
-                      <p className="text-[11px] text-muted-foreground">
+                                ? <QslSelect value={val(def.rcvd)} onChange={(v) => put(def.rcvd, v)} />
-                        {t('qedit.qslPanelHint')} <strong>{t('qedit.saveChanges')}</strong>.
+                                : <Input disabled value="—" />}
-                      </p>
+                            </div>
+                            <div><Label>{t('qedit.dateSent')}</Label><AdifDateInput value={val(def.sentDate)} onChange={(v) => put(def.sentDate, v)} /></div>
+                            <div><Label>{t('qedit.dateReceived')}</Label><AdifDateInput value={val(def.rcvdDate)} onChange={(v) => put(def.rcvdDate, v)} disabled={!def.rcvdDate} /></div>
+                            {/* How the card travelled, each way — ADIF's QSL Via
+                                enumeration. Not the manager: that is a callsign
+                                and lives on the Contact's details tab. */}
+                            {def.sentVia && (
+                              <div><Label>{t('qedit.sentVia')}</Label><QslViaSelect value={val(def.sentVia)} onChange={(v) => put(def.sentVia, v)} /></div>
+                            )}
+                            {def.rcvdVia && (
+                              <div><Label>{t('qedit.rcvdVia')}</Label><QslViaSelect value={val(def.rcvdVia)} onChange={(v) => put(def.rcvdVia, v)} /></div>
+                            )}
+                          </div>
+                          <p className="text-[11px] text-muted-foreground">
+                            {t('qedit.qslPanelHint')} <strong>{t('qedit.saveChanges')}</strong>.
+                          </p>
+                        </>
+                      )}
                     </div>
 
                     {/* Right: live status grid for every channel.
@@ -672,6 +816,17 @@ export function QSOEditModal({ qso, onSave, onDelete, onClose, countries = [], b
                               <td className="w-24">{c.rcvd ? <StatusCell value={val(c.rcvd)} /> : <span className="block text-center text-[11px] text-muted-foreground">—</span>}</td>
                             </tr>
                           ))}
+                          {/* OpsLog's own card, read from the ADIF extras rather
+                              than a QSO column — hence a hand-written row instead
+                              of a CONFIRMATIONS entry. "Sent" is stamped by OpsLog
+                              when the card actually goes out, so it stays
+                              read-only here: an operator ticking it by hand would
+                              be recording something that never happened. */}
+                          <tr className="text-xs">
+                            <td className="font-medium pr-3 py-0.5 whitespace-nowrap">{t('qedit.confOpsLog')}</td>
+                            <td className="w-24"><StatusCell value={opslogQslSent ? 'Y' : 'N'} /></td>
+                            <td className="w-24"><StatusCell value={qslReceived ? 'Y' : 'N'} /></td>
+                          </tr>
                         </tbody>
                       </table>
                     </div>
@@ -713,7 +868,7 @@ export function QSOEditModal({ qso, onSave, onDelete, onClose, countries = [], b
                 <F label={t('qedit.stationCallsign')} span={3}><Input value={draft.station_callsign ?? ''} onChange={(e) => set('station_callsign', e.target.value)} /></F>
                 <F label={t('qedit.operator')} span={3}><Input value={draft.operator ?? ''} onChange={(e) => set('operator', e.target.value)} /></F>
                 <F label={t('qedit.myGrid')}><Input value={draft.my_grid ?? ''} onChange={(e) => set('my_grid', e.target.value)} /></F>
-                <F label={t('qedit.gridExt')}><Input value={draft.my_gridsquare_ext ?? ''} onChange={(e) => set('my_gridsquare_ext', e.target.value)} /></F>
+                <F label={t('qedit.myGridExt')}><Input title={t('qedit.gridExtTip')} value={draft.my_gridsquare_ext ?? ''} onChange={(e) => set('my_gridsquare_ext', e.target.value)} /></F>
                 <F label={t('qedit.country')} span={2}><Combobox value={draft.my_country ?? ''} options={countries} placeholder={t('qedit.country')} onChange={(v) => set('my_country', v)} /></F>
                 <F label={t('qedit.state')}><Input value={draft.my_state ?? ''} onChange={(e) => set('my_state', e.target.value)} /></F>
                 <F label={t('qedit.county')}><Input value={draft.my_cnty ?? ''} onChange={(e) => set('my_cnty', e.target.value)} /></F>
@@ -749,6 +904,10 @@ export function QSOEditModal({ qso, onSave, onDelete, onClose, countries = [], b
               <div>
                 <p className="text-[11px] font-semibold text-muted-foreground uppercase tracking-wider mb-2">{t('qedit.powerWeather')}</p>
                 <div className="grid grid-cols-6 gap-3">
+                  {/* YOUR power first, then theirs. tx_pwr was saved by this
+                      editor but had no field: a contact logged at the wrong
+                      power could be read back and never corrected. */}
+                  <F label={t('qedit.txPower')}><Input type="number" value={draft.tx_pwr ?? ''} onChange={(e) => set('tx_pwr', numOrUndef(e.target.value) as any)} /></F>
                   <F label={t('qedit.rxPower')}><Input type="number" value={draft.rx_pwr ?? ''} onChange={(e) => set('rx_pwr', numOrUndef(e.target.value) as any)} /></F>
                   <F label={t('qedit.distance')}><Input type="number" value={draft.distance ?? ''} onChange={(e) => set('distance', numOrUndef(e.target.value) as any)} /></F>
                   <F label={t('qedit.aIndex')}><Input type="number" value={draft.a_index ?? ''} onChange={(e) => set('a_index', numOrUndef(e.target.value) as any)} /></F>

frontend/src/components/RecentQSOsGrid.tsx

@@ -18,6 +18,7 @@ import { Checkbox } from '@/components/ui/checkbox';
 import { loadLocal, loadRemote, saveState, seedLocal } from '@/lib/gridPrefs';
 import { useI18n } from '@/lib/i18n';
 import { gridToLatLon, pathBetweenLatLon } from '@/lib/maidenhead';
+import { rowStyleFor, type RowColorSettings } from '@/lib/rowColors';
 
 // Register every Community feature once. v32+ requires explicit registration;
 // AllCommunityModule keeps it simple and pulls in sort/filter/resize/reorder/
@@ -56,9 +57,14 @@ type Props = {
   onRowDoubleClicked?: (q: QSOForm) => void;
   onRowClicked?: (q: QSOForm) => void;
   onRowSelected?: (ids: number[]) => void;
+  // The full first selected row — the Stats (F1) panel shows its entity when the
+  // entry form is empty, so browsing the log answers "what have I got with this
+  // one?" without retyping the call.
+  onRowSelectedQso?: (row: QSOForm | null) => void;
   onUpdateFromCty?: (ids: number[]) => void;
   onUpdateFromQRZ?: (ids: number[]) => void;
   onUpdateFromClublog?: (ids: number[]) => void;
+  onUpdateCountyFromULS?: (ids: number[]) => void;
   onSendTo?: (service: string, ids: number[]) => void;
   onSendRecording?: (ids: number[]) => void;
   onSendEQSL?: (ids: number[]) => void;
@@ -76,6 +82,8 @@ type Props = {
   // One column per defined award; the cell shows the reference this QSO counts
   // for (from row.award_refs[CODE], attached by the parent). Hidden by default.
   awardCols?: { code: string; name: string }[];
+  // Whole-row colouring by QSL / LoTW status (Settings → Appearance).
+  rowColors?: RowColorSettings | null;
 };
 
 const BASE_COLSTATE_KEY = 'hamlog.qsoColState.v2';
@@ -128,6 +136,10 @@ function qsoDistanceKm(d: any, myGrid?: string): number | undefined {
 
 export const makeColCatalog = (t: TFn, myGrid?: string): ColEntry[] => [
   // ── QSO basics ──
+  // Position in the log, oldest = 1. Filled by the backend over the WHOLE log,
+  // so it does not change when a filter narrows what is shown.
+  { group: 'QSO', label: t('rqg.c.number'), colId: 'number', headerName: t('rqg.h.number'), field: 'number' as any, width: 80, type: 'rightAligned', cellClass: 'font-mono',
+    comparator: (a, b) => (a ?? 0) - (b ?? 0) },
   { group: 'QSO', label: t('rqg.c.qso_date'),  colId: 'qso_date', headerName: t('rqg.c.qso_date'), field: 'qso_date' as any, width: 150, cellClass: 'font-mono', valueFormatter: (p) => fmtDateUTC(p.value), sort: 'desc', defaultVisible: true },
   { group: 'QSO', label: t('rqg.c.qso_date_off'),  colId: 'qso_date_off', headerName: t('rqg.c.qso_date_off'), field: 'qso_date_off' as any, width: 150, cellClass: 'font-mono', valueFormatter: (p) => fmtDateUTC(p.value) },
   { group: 'QSO', label: t('rqg.c.callsign'),  colId: 'callsign', headerName: t('rqg.c.callsign'), field: 'callsign' as any, width: 110, cellClass: 'font-mono font-semibold', defaultVisible: true },
@@ -175,6 +187,8 @@ export const makeColCatalog = (t: TFn, myGrid?: string): ColEntry[] => [
   { group: 'QSL',  label: t('rqg.c.qsl_sent_date'),colId: 'qsl_sent_date', headerName: t('rqg.h.qsl_sent_date'), field: 'qsl_sent_date' as any, width: 120, valueFormatter: (p) => fmtDateOnly(p.value) },
   { group: 'QSL',  label: t('rqg.c.qsl_rcvd_date'),colId: 'qsl_rcvd_date', headerName: t('rqg.h.qsl_rcvd_date'), field: 'qsl_rcvd_date' as any, width: 120, valueFormatter: (p) => fmtDateOnly(p.value) },
   { group: 'QSL',  label: t('rqg.c.qsl_via'),      colId: 'qsl_via',       headerName: t('rqg.c.qsl_via'),    field: 'qsl_via' as any,       width: 130 },
+  { group: 'QSL',  label: t('rqg.c.qsl_sent_via'), colId: 'qsl_sent_via',  headerName: t('rqg.h.qsl_sent_via'), field: 'qsl_sent_via' as any, width: 110 },
+  { group: 'QSL',  label: t('rqg.c.qsl_rcvd_via'), colId: 'qsl_rcvd_via',  headerName: t('rqg.h.qsl_rcvd_via'), field: 'qsl_rcvd_via' as any, width: 110 },
   { group: 'QSL',  label: t('rqg.c.qsl_msg'),      colId: 'qsl_msg',       headerName: t('rqg.c.qsl_msg'),    field: 'qsl_msg' as any,       width: 200 },
   { group: 'QSL',  label: t('rqg.c.qslmsg_rcvd'), colId: 'qslmsg_rcvd',   headerName: t('rqg.c.qslmsg_rcvd'), field: 'qslmsg_rcvd' as any, width: 200 },
 
@@ -191,6 +205,8 @@ export const makeColCatalog = (t: TFn, myGrid?: string): ColEntry[] => [
   { group: 'eQSL', label: t('rqg.c.eqsl_rcvd_date'), colId: 'eqsl_rcvd_date', headerName: t('rqg.h.eqsl_rcvd_date'), field: 'eqsl_rcvd_date' as any, width: 120, valueFormatter: (p) => fmtDateOnly(p.value) },
   // App-specific: when OpsLog e-mailed its own QSL card. Distinct from eQSL.cc.
   { group: 'QSL', label: t('rqg.c.opslog_qsl_card_sent'), colId: 'opslog_qsl_card_sent', headerName: t('rqg.c.opslog_qsl_card_sent'), width: 100, cellClass: qslStatusCellClass, valueGetter: (p) => { const e = (p.data as any)?.extras ?? {}; return (e['APP_OPSLOG_QSL_SENT'] || e['APP_OPSLOG_QSL_CARD_SENT']) ? 'Y' : 'N'; }, defaultVisible: true },
+  // App-specific: operator marked a QSL as RECEIVED for this QSO (drives PSE/TNX).
+  { group: 'QSL', label: t('rqg.c.opslog_qsl_card_rcvd'), colId: 'opslog_qsl_card_rcvd', headerName: t('rqg.c.opslog_qsl_card_rcvd'), width: 100, cellClass: qslStatusCellClass, valueGetter: (p) => { const e = (p.data as any)?.extras ?? {}; return e['APP_OPSLOG_QSL_RCVD'] ? 'Y' : 'N'; }, defaultVisible: false },
   // App-specific: when the QSO's audio recording was e-mailed to the station.
   { group: 'QSL', label: t('rqg.c.opslog_recording_sent'), colId: 'opslog_recording_sent', headerName: t('rqg.h.opslog_recording_sent'), width: 100, cellClass: qslStatusCellClass, valueGetter: (p) => { const e = (p.data as any)?.extras ?? {}; return e['APP_OPSLOG_RECORDING_SENT'] ? 'Y' : 'N'; }, defaultVisible: false },
 
@@ -276,14 +292,24 @@ const GRP_KEYS: Record<string, string> = {
 };
 export const groupLabel = (t: TFn, g: string): string => t(GRP_KEYS[g] ?? g);
 
-// Award columns are governed SOLELY by the awardShown code-set, never by AG
+// Award-column VISIBILITY is governed SOLELY by the awardShown code-set, never
-// Grid's saved column state. Stripping them here (on both save and restore)
+// by AG Grid's saved column state: dropping `hide` here (on both save and
-// stops a stale saved state from re-hiding a shown award column on every
+// restore) stops a stale saved state from re-hiding a shown award column on
-// awardCols rebuild — the desync that made award columns vanish mid-session.
+// every awardCols rebuild — the desync that made award columns vanish
-const stripAwardCols = (st: any[] | null | undefined): any[] =>
+// mid-session.
-  (st ?? []).filter((s) => !String(s?.colId ?? '').startsWith('award_'));
+//
+// Their POSITION, however, has to stay in the state. Filtering the entries out
+// entirely left applyColumnState({applyOrder:true}) with no place for them, and
+// AG Grid appends what the state doesn't mention — so a column the operator
+// dragged to sit AFTER an award column jumped back in front of it on reload.
+const sanitizeAwardCols = (st: any[] | null | undefined): any[] =>
+  (st ?? []).map((s) => {
+    if (!String(s?.colId ?? '').startsWith('award_')) return s;
+    const { hide: _hide, ...rest } = s as any;
+    return rest;
+  });
 
-export function RecentQSOsGrid({ rows, myGrid, selectAllSignal, selectRowSignal, rowDragCall, passOrder, onGridApi, storageKey, onRowDoubleClicked, onRowClicked, onRowSelected, onUpdateFromCty, onUpdateFromQRZ, onUpdateFromClublog, onSendTo, onSendRecording, onSendEQSL, onBulkEdit, onExportSelected, onExportSelectedFields, onExportFiltered, onExportCabrilloSelected, onExportCabrilloFiltered, onDelete, onFilteredCountChange, awardCols }: Props) {
+export function RecentQSOsGrid({ rows, myGrid, selectAllSignal, selectRowSignal, rowDragCall, passOrder, onGridApi, storageKey, onRowDoubleClicked, onRowClicked, onRowSelected, onRowSelectedQso, onUpdateFromCty, onUpdateFromQRZ, onUpdateFromClublog, onUpdateCountyFromULS, onSendTo, onSendRecording, onSendEQSL, onBulkEdit, onExportSelected, onExportSelectedFields, onExportFiltered, onExportCabrilloSelected, onExportCabrilloFiltered, onDelete, onFilteredCountChange, awardCols, rowColors }: Props) {
   const { t } = useI18n();
   const gridRef = useRef<any>(null);
   const [pickerOpen, setPickerOpen] = useState(false);
@@ -464,12 +490,12 @@ export function RecentQSOsGrid({ rows, myGrid, selectAllSignal, selectRowSignal,
   function onGridReady(e: GridReadyEvent) {
     onGridApi?.(e.api);
     const local = loadLocal(colStateKey);
-    if (local) e.api.applyColumnState({ state: sanitizeState(stripAwardCols(local)) as ColumnState[], applyOrder: true });
+    if (local) e.api.applyColumnState({ state: sanitizeState(sanitizeAwardCols(local)) as ColumnState[], applyOrder: true });
     // Fall back to the portable DB copy when the local cache is empty
     // (fresh machine / after a reinstall), then re-seed the cache.
     loadRemote(colStateKey).then((remote) => {
       if (remote && !local) {
-        e.api.applyColumnState({ state: sanitizeState(stripAwardCols(remote)) as ColumnState[], applyOrder: true });
+        e.api.applyColumnState({ state: sanitizeState(sanitizeAwardCols(remote)) as ColumnState[], applyOrder: true });
         seedLocal(colStateKey, remote);
       }
     });
@@ -493,7 +519,7 @@ export function RecentQSOsGrid({ rows, myGrid, selectAllSignal, selectRowSignal,
     if (restoringRef.current) return; // ignore the events fired by a column rebuild
     const state = gridRef.current?.api?.getColumnState();
     if (!state) return;
-    saveState(colStateKey, stripAwardCols(state));
+    saveState(colStateKey, sanitizeAwardCols(state));
     // Award columns are stripped above, so persist their widths on the side.
     let changed = false;
     for (const s of state) {
@@ -521,7 +547,7 @@ export function RecentQSOsGrid({ rows, myGrid, selectAllSignal, selectRowSignal,
   useEffect(() => {
     const api = gridRef.current?.api;
     const local = loadLocal(colStateKey);
-    if (api && local) api.applyColumnState({ state: sanitizeState(stripAwardCols(local)) as ColumnState[], applyOrder: true });
+    if (api && local) api.applyColumnState({ state: sanitizeState(sanitizeAwardCols(local)) as ColumnState[], applyOrder: true });
     // Re-enable saving once AG Grid has settled the column events from the rebuild.
     const t = window.setTimeout(() => { restoringRef.current = false; }, 0);
     return () => window.clearTimeout(t);
@@ -542,6 +568,7 @@ export function RecentQSOsGrid({ rows, myGrid, selectAllSignal, selectRowSignal,
     setSelCount(sel.length);
     setDispCount(api?.getDisplayedRowCount?.() ?? 0);
     onRowSelected?.(sel.map((r) => r.id as number).filter((id) => id != null));
+    onRowSelectedQso?.(sel[0] ?? null);
   }
   // Select every row when the caller bumps selectAllSignal (QSL Manager search).
   useEffect(() => {
@@ -604,6 +631,20 @@ export function RecentQSOsGrid({ rows, myGrid, selectAllSignal, selectRowSignal,
     api.setColumnsVisible(ids, false);
     saveColumnState();
   }
+  // Whole-dialog show/hide. showAll/hideAll cover the CATALOGUE only; the award
+  // columns live in their own persisted code set, so a global that skipped them
+  // would leave a row of columns behind and look broken.
+  function setEverything(visible: boolean) {
+    const api = gridRef.current?.api;
+    if (!api) return;
+    api.setColumnsVisible(COL_CATALOG.map((c) => c.colId!), visible);
+    if (awardCols && awardCols.length > 0) {
+      persistAwardShown(visible ? new Set(awardCols.map((a) => a.code.toUpperCase())) : new Set());
+      api.setColumnsVisible(awardCols.map((a) => `award_${a.code}`), visible);
+    }
+    saveColumnState();
+  }
+
   function resetDefaults() {
     const api = gridRef.current?.api;
     if (!api) return;
@@ -679,16 +720,22 @@ export function RecentQSOsGrid({ rows, myGrid, selectAllSignal, selectRowSignal,
             animateRows={false}
             suppressCellFocus
             getRowId={(p) => String((p.data as any).id)}
+            getRowStyle={(p) => rowStyleFor(p.data, rowColors ?? null, p.node.rowIndex ?? undefined)}
           />
         </div>
       </div>
 
+      {/* Every handler is passed STRAIGHT through, never wrapped in an arrow: a
+          wrapper is always truthy, so the menu drew "Fix country" and "Update
+          from the callsign databases" even in a grid that wired neither — and
+          clicking them did nothing at all. */}
       <QSOContextMenu
         menu={menu}
         onClose={() => setMenu(null)}
-        onUpdateFromCty={(ids) => onUpdateFromCty?.(ids)}
+        onUpdateFromCty={onUpdateFromCty}
-        onUpdateFromQRZ={(ids) => onUpdateFromQRZ?.(ids)}
+        onUpdateFromQRZ={onUpdateFromQRZ}
         onUpdateFromClublog={onUpdateFromClublog}
+        onUpdateCountyFromULS={onUpdateCountyFromULS}
         onSendTo={onSendTo}
         onSendRecording={onSendRecording}
         onSendEQSL={onSendEQSL}
@@ -709,6 +756,16 @@ export function RecentQSOsGrid({ rows, myGrid, selectAllSignal, selectRowSignal,
               {t('rqg.pickerDesc')}
             </DialogDescription>
           </DialogHeader>
+          {/* Whole-dialog controls. The per-group links alone meant hiding
+              everything was one click PER GROUP, and there are a dozen. */}
+          <div className="flex items-center gap-1 px-5 text-[11px] text-muted-foreground">
+            <span>{t('rqg.pickerAllGroups')}</span>
+            <button type="button" className="text-[11px] text-primary hover:underline px-1"
+              onClick={() => setEverything(true)}>{t('rqg.all')}</button>
+            <span className="opacity-40">·</span>
+            <button type="button" className="text-[11px] text-muted-foreground hover:underline px-1"
+              onClick={() => setEverything(false)}>{t('rqg.none')}</button>
+          </div>
           <div className="grid grid-cols-3 gap-4 max-h-[60vh] overflow-y-auto px-5 py-3">
             {GROUP_ORDER.map((group) => {
               const cols = COL_CATALOG.filter((c) => c.group === group);

frontend/src/components/RotorCompass.tsx

@@ -5,12 +5,13 @@
 // when an Ultrabeam is bidirectional, the opposite one when reversed); a small
 // red marker on the bezel shows the short-path bearing to the DX. Click the dial
 // to turn the antenna there.
-import { useMemo } from 'react';
+import { useEffect, useMemo, useRef, useState } from 'react';
 import { geoAzimuthalEquidistant, geoPath, geoGraticule10 } from 'd3-geo';
 import { feature } from 'topojson-client';
 import landTopo from 'world-atlas/land-110m.json';
-import { Compass, X } from 'lucide-react';
+import { Compass, X, Play, Square } from 'lucide-react';
 import { cn } from '@/lib/utils';
+import { useI18n } from '@/lib/i18n';
 
 // Decode the coastline outline once (≈110 m simplified land polygons).
 const LAND = feature(landTopo as any, (landTopo as any).objects.land);
@@ -24,8 +25,16 @@ interface Props {
   centerLat?: number | null;     // operator latitude (projection centre)
   centerLon?: number | null;     // operator longitude
   rotorEnabled?: boolean;
+  rotors?: string[];             // logical rotor names; >1 → show a selector
+  activeRotor?: number;          // index of the selected rotor (0-based)
+  onSelectRotor?: (i: number) => void; // switch the active rotor
   onGoto?: (az: number) => void; // click-to-turn
   onClose?: () => void;
+  // Quick-turn buttons and the azimuth box, shown only where the caller wants
+  // them: Station Control draws its own GoTo/Stop around this compass, and two
+  // sets of the same controls side by side would be nothing but confusing.
+  presets?: { label: string; azimuth: number }[];
+  onStop?: () => void;
 }
 
 const SIZE = 168;
@@ -38,7 +47,58 @@ function pt(az: number, radius: number): [number, number] {
   return [C + radius * Math.cos(a), C + radius * Math.sin(a)];
 }
 
-export function RotorCompass({ bearing, headings, boomHeading, pattern, centerLat, centerLon, rotorEnabled, onGoto, onClose }: Props) {
+export function RotorCompass({ bearing, headings, boomHeading, pattern, centerLat, centerLon, rotorEnabled, rotors, activeRotor, onSelectRotor, onGoto, onClose, presets, onStop }: Props) {
+  const { t } = useI18n();
+  // Raw text, not a number: binding the input to a normalised value makes
+  // Backspace fight the operator on the way from "230" to "23". It is parsed
+  // when it is sent, and only then.
+  const [azText, setAzText] = useState('');
+  const showControls = !!(presets || onStop);
+
+  // Which preset was just pressed, so it can light up for a moment.
+  //
+  // A rotor takes seconds to start moving and the needle barely twitches at
+  // first, so without this the only answer to "did that register?" is to press
+  // it again — which is how an antenna ends up ordered somewhere twice. The
+  // acknowledgement has to come from the button itself, at once.
+  const [flashIdx, setFlashIdx] = useState<number | null>(null);
+  const flashTimer = useRef<number | undefined>(undefined);
+  useEffect(() => () => window.clearTimeout(flashTimer.current), []);
+  const pressPreset = (i: number, az: number) => {
+    if (!onGoto) return;
+    setFlashIdx(i);
+    window.clearTimeout(flashTimer.current);
+    flashTimer.current = window.setTimeout(() => setFlashIdx(null), 450);
+    onGoto(az);
+  };
+
+  // Stop needs the same acknowledgement, for the same reason and one more: it
+  // is pressed when something is already wrong, and a button that stays inert
+  // gets hit again and again. Its own flag, so stopping does not blank a preset
+  // that is still lit.
+  const [stopFlash, setStopFlash] = useState(false);
+  const stopTimer = useRef<number | undefined>(undefined);
+  useEffect(() => () => window.clearTimeout(stopTimer.current), []);
+  const pressStop = () => {
+    if (!onStop) return;
+    setStopFlash(true);
+    window.clearTimeout(stopTimer.current);
+    stopTimer.current = window.setTimeout(() => setStopFlash(false), 450);
+    onStop();
+  };
+
+  // 0-359 and nothing else. 360 is refused rather than folded to 0 — it is
+  // almost always a typo for 36 or 306, and a rotor swinging through north on a
+  // slip of the finger is worth one rejected keypress.
+  const sendAz = () => {
+    const s = azText.trim();
+    if (s === '' || !onGoto) return;
+    const n = Number(s);
+    if (!Number.isFinite(n) || !Number.isInteger(n) || n < 0 || n > 359) return;
+    onGoto(n);
+    setAzText('');
+  };
+
   const cardinals = useMemo(
     () => [ { d: 0, l: 'N' }, { d: 45, l: 'NE' }, { d: 90, l: 'E' }, { d: 135, l: 'SE' },
             { d: 180, l: 'S' }, { d: 225, l: 'SW' }, { d: 270, l: 'W' }, { d: 315, l: 'NW' } ],
@@ -69,6 +129,35 @@ export function RotorCompass({ bearing, headings, boomHeading, pattern, centerLa
 
   const headLabel = headings.length ? headings[0] : null;
 
+  // Short and long path to the DX, in figures.
+  //
+  // The bezel already carries the short path as a red marker, but a marker is a
+  // direction, not a number — the same pair sits in the status bar at 10px and
+  // operators reported not being able to read it. It lives here because it
+  // belongs to the compass: every place that draws one gets the readout, instead
+  // of each caller inventing its own. Clickable when the caller can turn, like
+  // the status bar's. Built as a value because it is placed in one of two
+  // columns depending on whether the controls are shown.
+  const pathReadout = (
+    <div className="flex gap-1.5 mt-2 font-mono w-full">
+      {([['SP', bearing ?? null], ['LP', bearing == null ? null : (bearing + 180) % 360]] as const).map(([lbl, az]) => (
+        <button key={lbl} type="button" disabled={az == null || !onGoto}
+          onClick={() => { if (az != null && onGoto) onGoto(Math.round(az)); }}
+          title={az == null ? '' : `${lbl} ${Math.round(az)}°`}
+          className={
+            'flex-1 rounded-md border py-1 text-xs font-semibold tabular-nums transition-colors active:scale-95 ' +
+            (az == null
+              ? 'border-border text-muted-foreground/50 cursor-not-allowed'
+              : onGoto
+                ? 'border-info-border text-info-muted-foreground hover:bg-info-muted cursor-pointer'
+                : 'border-border text-muted-foreground cursor-default')
+          }>
+          {lbl} {az == null ? '—' : `${Math.round(az)}°`}
+        </button>
+      ))}
+    </div>
+  );
+
   return (
     <section className="flex flex-col h-full min-h-0 rounded-lg border border-border bg-card overflow-hidden">
       {/* Header — matches the WinKeyer / Voice keyer panels. */}
@@ -100,7 +189,38 @@ export function RotorCompass({ bearing, headings, boomHeading, pattern, centerLa
         )}
       </div>
 
-      <div className="flex items-center justify-center p-2 min-h-0">
+      {/* Multiple rotors — pick which one the dial shows and turns. */}
+      {rotors && rotors.length > 1 && (
+        <div className="flex flex-wrap gap-1 px-2 pt-1.5">
+          {rotors.map((nm, i) => {
+            const active = (activeRotor ?? 0) === i;
+            const label = nm?.trim() || `Rotor ${i + 1}`;
+            return (
+              <button
+                key={i}
+                onClick={() => onSelectRotor?.(i)}
+                className={cn(
+                  'flex-1 min-w-[48px] px-1.5 py-0.5 rounded text-[10px] font-semibold truncate transition-colors',
+                  active
+                    ? 'bg-success text-success-foreground'
+                    : 'bg-muted text-muted-foreground hover:bg-muted/70',
+                )}
+                title={label}
+              >
+                {label}
+              </button>
+            );
+          })}
+        </div>
+      )}
+
+      {/* Dial on the left, controls on the right. The controls column is sized to
+          fit WITHIN the dial's height: the widget sits in a row whose height is
+          set by the entry strip, so it may grow sideways but never downwards. */}
+      <div className="flex items-start gap-2 p-2 min-h-0">
+      {/* flex-col: the readout goes BELOW the dial. This wrapper was a row, so a
+          sibling of the <svg> landed beside it. */}
+      <div className="flex flex-col items-center justify-center min-h-0 shrink-0">
         <svg
           viewBox={`0 0 ${SIZE} ${SIZE}`}
           className={onGoto ? 'cursor-pointer select-none' : 'select-none'}
@@ -160,6 +280,93 @@ export function RotorCompass({ bearing, headings, boomHeading, pattern, centerLa
           ); })}
           <circle cx={C} cy={C} r={3.5} fill="#15803d" stroke="#fff" strokeWidth={1} />
         </svg>
+
+        {/* With the controls column present the readout goes at the FOOT OF IT
+            instead: the dial sets the widget's height, the controls are shorter
+            than the dial, and that leftover space is exactly the right size for
+            the pair. Under the dial it would push the whole widget taller. */}
+        {!showControls && pathReadout}
+      </div>
+
+      {/* Quick turns + free azimuth + Stop. */}
+      {showControls && (
+        <div className="flex flex-col gap-1.5 flex-1 min-w-0">
+          {/* Two columns so six regions fit beside the dial rather than under
+              it. An operator with fewer keeps the same compact block. */}
+          {!!presets?.length && (
+            <div className="grid grid-cols-2 gap-1">
+              {presets.map((p, i) => (
+                <button
+                  key={`${p.label}-${i}`}
+                  type="button"
+                  disabled={!onGoto}
+                  onClick={() => pressPreset(i, p.azimuth)}
+                  title={`${p.label} — ${p.azimuth}°`}
+                  className={cn(
+                    'rounded-md border py-1 text-xs font-semibold truncate transition-all duration-150 active:scale-95',
+                    flashIdx === i
+                      // Lit, and showing the azimuth it just sent: the label alone
+                      // would only say the press landed, not what was ordered.
+                      ? 'border-success bg-success text-success-foreground scale-95'
+                      : 'border-border bg-muted/40',
+                    onGoto && flashIdx !== i ? 'hover:bg-muted' : '',
+                    !onGoto ? 'opacity-50 cursor-not-allowed' : '',
+                  )}
+                >
+                  {flashIdx === i ? `${p.azimuth}°` : p.label}
+                </button>
+              ))}
+            </div>
+          )}
+
+          {/* Free azimuth: Enter sends, so the whole thing is type-three-digits
+              -and-go without reaching for the mouse. */}
+          <div className="flex gap-1">
+            <input
+              type="text"
+              inputMode="numeric"
+              value={azText}
+              onChange={(e) => setAzText(e.target.value.replace(/[^0-9]/g, '').slice(0, 3))}
+              onKeyDown={(e) => { if (e.key === 'Enter') { e.preventDefault(); sendAz(); } }}
+              placeholder={t('rotor.azPh')}
+              title={t('rotor.azTitle')}
+              disabled={!onGoto}
+              className="min-w-0 flex-1 rounded-md border border-border bg-background px-2 py-1 text-xs font-mono tabular-nums text-center disabled:opacity-50"
+            />
+            <button
+              type="button"
+              onClick={sendAz}
+              disabled={!onGoto || azText.trim() === ''}
+              title={t('rotor.go')}
+              className="flex items-center gap-1 rounded-md border border-success/60 bg-success-muted px-2 py-1 text-xs font-bold text-success-muted-foreground transition-transform hover:bg-success/25 active:scale-95 disabled:opacity-40 disabled:cursor-not-allowed"
+            >
+              <Play className="size-3" /> {t('rotor.go')}
+            </button>
+          </div>
+
+          {onStop && (
+            <button
+              type="button"
+              onClick={pressStop}
+              title={t('rotor.stop')}
+              className={cn(
+                'flex items-center justify-center gap-1.5 rounded-md border py-1 text-xs font-bold transition-all duration-150 active:scale-95',
+                stopFlash
+                  // Solid, not a tint: STOP reads the same in both languages, so
+                  // the fill is the whole acknowledgement.
+                  ? 'border-destructive bg-destructive text-destructive-foreground scale-95'
+                  : 'border-destructive/60 bg-destructive/15 text-destructive hover:bg-destructive/25',
+              )}
+            >
+              <Square className="size-3 fill-current" /> {t('rotor.stop')}
+            </button>
+          )}
+
+          {/* mt-auto: the readout sits at the FOOT of the column, level with the
+              bottom of the dial, instead of floating under the Stop button. */}
+          <div className="mt-auto">{pathReadout}</div>
+        </div>
+      )}
       </div>
     </section>
   );

frontend/src/components/SendSpotModal.tsx

@@ -13,6 +13,32 @@ export interface RecentSpotQSO {
   freqKHz: number;
   mode: string;
   band?: string;
+  // Award references logged for this QSO, each one complete and ready to read
+  // on a cluster line ("POTA FR-11553"). Empty for an ordinary contact.
+  refs?: string[];
+}
+
+// SPOT_COMMENT_MAX is the DX cluster comment field: 30 characters, and nodes
+// truncate what does not fit without saying so. Only the comment BUILT here is
+// held to it — whatever the operator types is their own business.
+const SPOT_COMMENT_MAX = 30;
+
+// spotComment puts the award references after the mode, the order a cluster
+// line is read in: "CW POTA FR-11553".
+//
+// A reference goes in whole or not at all. Truncation would leave "CW POTA" or
+// half a park number on the air, which is worse than saying nothing: a spot
+// nobody can act on still costs everyone who reads it.
+export function spotComment(mode: string, refs?: string[]): string {
+  let out = (mode || '').trim();
+  for (const ref of refs ?? []) {
+    const one = ref.trim();
+    if (!one) continue;
+    const next = out ? `${out} ${one}` : one;
+    if (next.length > SPOT_COMMENT_MAX) continue; // a shorter one may still fit
+    out = next;
+  }
+  return out;
 }
 
 interface Props {
@@ -23,6 +49,9 @@ interface Props {
   defaultCall: string;
   defaultFreqKHz: number;
   defaultMode: string;
+  // Award references on the QSO being entered (or on the last logged one),
+  // appended to the comment after the mode.
+  defaultRefs?: string[];
   // Master cluster name, shown so the user knows where the spot goes.
   targetName?: string;
   recent: RecentSpotQSO[];
@@ -33,7 +62,7 @@ interface Props {
 // the master cluster: callsign + frequency (kHz) + a free message (defaults
 // to the mode). A "Latest QSOs" list lets the operator one-click a recent
 // contact into the form.
-export function SendSpotModal({ open, onClose, defaultCall, defaultFreqKHz, defaultMode, targetName, recent, onSend }: Props) {
+export function SendSpotModal({ open, onClose, defaultCall, defaultFreqKHz, defaultMode, defaultRefs, targetName, recent, onSend }: Props) {
   const { t } = useI18n();
   const [call, setCall] = useState('');
   const [freqKHz, setFreqKHz] = useState('');
@@ -48,12 +77,12 @@ export function SendSpotModal({ open, onClose, defaultCall, defaultFreqKHz, defa
     if (!open) return;
     setCall((defaultCall || '').toUpperCase());
     setFreqKHz(defaultFreqKHz > 0 ? trimKHz(defaultFreqKHz) : '');
-    setMessage(defaultMode || '');
+    setMessage(spotComment(defaultMode, defaultRefs));
     setError('');
     setOk(false);
     // Focus the freq if the call is already known, else the call.
     setTimeout(() => callRef.current?.focus(), 50);
-  }, [open, defaultCall, defaultFreqKHz, defaultMode]);
+  }, [open, defaultCall, defaultFreqKHz, defaultMode, defaultRefs]);
 
   async function send() {
     const c = call.trim().toUpperCase();
@@ -77,7 +106,7 @@ export function SendSpotModal({ open, onClose, defaultCall, defaultFreqKHz, defa
   function pick(q: RecentSpotQSO) {
     setCall(q.callsign.toUpperCase());
     if (q.freqKHz > 0) setFreqKHz(trimKHz(q.freqKHz));
-    if (q.mode) setMessage(q.mode);
+    setMessage(spotComment(q.mode, q.refs));
     setError('');
   }
 

frontend/src/components/StationControlPanel.tsx

@@ -1,44 +1,122 @@
-import { useCallback, useEffect, useRef, useState } from 'react';
+import { useCallback, useEffect, useLayoutEffect, useRef, useState } from 'react';
-import { Plus, Pencil, Trash2, Power, PlugZap, Loader2, Check, X, Compass, Square, Antenna as AntennaIcon, ArrowDownToLine, Minus, RefreshCw, GripVertical } from 'lucide-react';
+import { Plus, Pencil, Trash2, Power, PlugZap, Loader2, Check, X, Compass, Square, Antenna as AntennaIcon, ArrowDownToLine, Minus, RefreshCw, GripVertical, ChevronUp, ChevronDown } from 'lucide-react';
 import { Button } from '@/components/ui/button';
 import { Input } from '@/components/ui/input';
 import { Label } from '@/components/ui/label';
+import { Checkbox } from '@/components/ui/checkbox';
 import { Select, SelectContent, SelectItem, SelectTrigger, SelectValue } from '@/components/ui/select';
 import { cn } from '@/lib/utils';
+import { MotorAntennaWidget, type AntStatus } from '@/components/MotorAntennaWidget';
 import { useI18n } from '@/lib/i18n';
 import { writeUiPref } from '@/lib/uiPref';
+import { subscribeRotorHeading, pokeRotorHeading } from '@/lib/rotorHeading';
 import { RotorCompass } from '@/components/RotorCompass';
 import { AmpCard } from '@/components/AmpCard';
 import { TunerCard } from '@/components/TunerCard';
 import type { TGStatus } from '@/components/TunerGeniusPanel';
 import {
   GetStationDevices, SaveStationDevices, GetStationStatus, StationSetRelay,
-  GetRotatorHeading, RotatorGoTo, RotatorStop,
+  RotatorGoTo, RotatorStop, SetActiveRotor,
   GetUltrabeamStatus, SetUltrabeamDirection, UltrabeamRetract, MotorSetElement, MotorReadElements,
+  MotorTuneKHz, MotorNudgeKHz, SetMotorFollow,
   ListDenkoviDevices, ListSerialPorts, TestStationDevice,
   GetAmpStatuses, GetFlexState,
   GetTunerGeniusStatus, GetTunerGeniusSettings,
+  GetPSUStatus, GetPSUSettings, SetPSUOutput,
 } from '../../wailsjs/go/main/App';
 
 type RotatorProps = { centerLat?: number | null; centerLon?: number | null; bearing?: number | null };
 
-type Device = { id: string; type: string; name: string; host: string; user?: string; pass?: string; channels?: number; labels: string[] };
+type PSUState = { connected: boolean; on: boolean; volts: number; amps: number; watts: number; set_volts: number; set_amps: number; protected: number; error?: string };
+
+// The bench supply. One button — the output — and the three numbers that say
+// what it is actually delivering.
+//
+// The SET points are shown beside them, small, because "13.8 V set" next to
+// "0.02 A out" is how an operator sees at a glance that the supply is on but
+// the radio is not drawing. They are not editable: OpsLog reads them and never
+// writes them, which is the whole safety story of this device.
+function PSUCard({ st, busy, onToggle, t }: {
+  st: PSUState; busy: boolean; onToggle: (on: boolean) => void; t: (k: string, v?: any) => string;
+}) {
+  const tripped = (st.protected ?? 0) !== 0;
+  return (
+    <div className="rounded-xl border border-border bg-card shadow-sm overflow-hidden h-full">
+      <div className="flex items-center gap-2 px-3 py-2 border-b border-border/60 bg-muted/30">
+        <Power className="size-4 text-primary" />
+        <div className="text-sm font-semibold truncate">{t('psu.title')}</div>
+        <span className={cn('ml-auto size-2 rounded-full shrink-0', st.connected ? 'bg-success' : 'bg-muted-foreground/40')}
+          title={st.connected ? t('station.online') : (st.error || t('psu.offline'))} />
+      </div>
+      <div className="p-3 space-y-2">
+        <div className="flex items-center gap-3">
+          <button type="button" disabled={!st.connected || busy}
+            onClick={() => onToggle(!st.on)}
+            className={cn('flex items-center gap-2 rounded-md border px-3 py-1.5 transition-colors disabled:opacity-40',
+              st.on ? 'bg-success/15 border-success/50' : 'bg-muted/30 border-border hover:bg-muted')}>
+            <span className={cn('flex items-center justify-center size-6 rounded shrink-0',
+              st.on ? 'bg-success text-success-foreground' : 'bg-muted-foreground/15 text-muted-foreground')}>
+              {busy ? <Loader2 className="size-3.5 animate-spin" /> : <Power className="size-3.5" />}
+            </span>
+            <span className="text-xs font-semibold">{t('psu.output')}</span>
+            <span className={cn('text-[10px] font-bold', st.on ? 'text-success' : 'text-muted-foreground/60')}>
+              {st.on ? t('station.on') : t('station.off')}
+            </span>
+          </button>
+          <div className="flex-1 min-w-0 font-mono tabular-nums text-right">
+            <span className="text-lg font-bold">{(st.volts ?? 0).toFixed(2)}</span><span className="text-xs text-muted-foreground"> V</span>
+            <span className="text-lg font-bold ml-3">{(st.amps ?? 0).toFixed(3)}</span><span className="text-xs text-muted-foreground"> A</span>
+          </div>
+        </div>
+        <div className="flex items-center justify-between text-[11px] text-muted-foreground font-mono">
+          <span>{(st.watts ?? 0).toFixed(1)} W</span>
+          <span>{t('psu.setTo')} {(st.set_volts ?? 0).toFixed(2)} V / {(st.set_amps ?? 0).toFixed(3)} A</span>
+        </div>
+        {tripped && (
+          <div className="text-[11px] font-bold text-danger">{t('psu.tripped')} (0x{(st.protected ?? 0).toString(16).toUpperCase()})</div>
+        )}
+      </div>
+    </div>
+  );
+}
+
+type Device = {
+  id: string; type: string; name: string; host: string;
+  user?: string; pass?: string; channels?: number; labels: string[];
+  // Generic HTTP board only. The per-relay URLs win over the patterns.
+  on_urls?: string[]; off_urls?: string[]; on_pattern?: string; off_pattern?: string; insecure_tls?: boolean;
+};
 type Relay = { number: number; label: string; on: boolean };
 type DevStatus = { id: string; name: string; type: string; connected: boolean; error?: string; relays: Relay[] };
 
-const RELAY_COUNT: Record<string, number> = { webswitch: 5, kmtronic: 8, denkovi: 8, usbrelay: 8 };
+// Dashboard geometry: a grid of EQUAL columns whose cards also share a common
-const TYPE_LABEL: Record<string, string> = { webswitch: 'WebSwitch 1216H', kmtronic: 'KMTronic 8-relay', denkovi: 'Denkovi USB (FT245)', usbrelay: 'Denkovi USB (serial)' };
+// HEIGHT per row — every card stretches to the tallest one beside it. Masonry
+// packed tighter but left the row edges ragged, which read as untidy on a wide
+// screen; aligned rows are what an operator expects from a dashboard.
+const CARD_MIN = 430; // narrowest a card may get before "Auto" drops a column
+const GRID_GAP = 16; // px between cards, both axes
+
+const RELAY_COUNT: Record<string, number> = { webswitch: 5, kmtronic: 8, denkovi: 8, usbrelay: 8, dingtian: 2, httpgen: 4 };
+const TYPE_LABEL: Record<string, string> = { webswitch: 'WebSwitch 1216H', kmtronic: 'KMTronic 8-relay', denkovi: 'Denkovi USB (FT245)', usbrelay: 'Denkovi USB (serial)', dingtian: 'Dingtian IOT relay', httpgen: 'HTTP relay' };
 
 // Relay count for a configured device: fixed by type, except Denkovi (4/8) and
 // the generic USB-serial board, whose channel count the user picks.
+// chanCount is the relay count for a device. It MUST agree with
+// deviceRelayCount in app.go: the two decide how many labels and URL rows the
+// editor shows and how many relays the driver is built for, and a type known to
+// one and not the other silently pins the count to its fixed default — which is
+// exactly what happened when the HTTP board was added here and not below.
 const chanCount = (d: Device): number =>
-  (d.type === 'denkovi' || d.type === 'usbrelay') ? (d.channels && d.channels >= 1 ? d.channels : 8) : (RELAY_COUNT[d.type] ?? 5);
+  (d.type === 'denkovi' || d.type === 'usbrelay') ? (d.channels && d.channels >= 1 ? d.channels : 8)
+    : d.type === 'dingtian' ? (d.channels && d.channels >= 1 ? d.channels : 2)
+      : d.type === 'httpgen' ? (d.channels && d.channels >= 1 ? d.channels : 4)
+        : (RELAY_COUNT[d.type] ?? 5);
 
 function blankDevice(): Device {
   return { id: '', type: 'webswitch', name: '', host: '', user: '', pass: '', labels: Array(5).fill('') };
 }
 
-type Heading = { enabled: boolean; ok: boolean; azimuth: number };
+type Heading = { enabled: boolean; ok: boolean; azimuth: number; rotors?: string[]; active?: number };
 
 // RotatorWidget shows the configured rotator (Settings → Rotator) right in the
 // Station Control tab: a live compass you can click to turn, a heading readout, a
@@ -67,12 +145,17 @@ function RotatorWidget({ hd, refetch, centerLat, centerLon, bearing, t }: Rotato
           title={hd.ok ? t('station.online') : t('station.rotatorNoRead')} />
       </div>
       <div className="p-3 flex gap-4 items-start">
+        {/* The SP/LP readout lives INSIDE RotorCompass, so every compass in the
+            app carries it rather than each caller drawing its own. */}
         <RotorCompass
           bearing={bearing ?? null}
           headings={hd.ok ? [hd.azimuth] : []}
           centerLat={centerLat ?? null}
           centerLon={centerLon ?? null}
           rotorEnabled={hd.ok}
+          rotors={hd.rotors}
+          activeRotor={hd.active}
+          onSelectRotor={(i) => { SetActiveRotor(i).then(refetch).catch((e) => setErr(String(e?.message ?? e))); }}
           onGoto={(az) => turn(az)}
         />
         <div className="flex-1 min-w-0 space-y-2">
@@ -103,155 +186,6 @@ function RotatorWidget({ hd, refetch, centerLat, centerLon, bearing, t }: Rotato
   );
 }
 
-type AntStatus = { enabled: boolean; type: string; connected: boolean; direction: number; frequency: number; moving: boolean; elements: number[] };
-
-// MotorAntennaWidget controls a motorized antenna (Ultrabeam / SteppIR) from the
-// Station Control tab: pattern (Normal / 180° / Bi), Retract, and — Ultrabeam
-// only — per-element length adjustment. Heading/state is polled by the panel.
-const ELEMENT_STEP = 2; // the physical console adjusts 2 mm per press
-
-// elementName maps an element index to a ham-radio name: 0 = reflector,
-// 1 = driven element, then Director 1, 2, 3…
-function elementName(i: number, t: (k: string, v?: any) => string): string {
-  if (i === 0) return t('station.reflector');
-  if (i === 1) return t('station.driven');
-  return `${t('station.director')} ${i - 1}`;
-}
-
-function MotorAntennaWidget({ ant, refetch, t }: { ant: AntStatus; refetch: () => void; t: (k: string, v?: any) => string }) {
-  const [err, setErr] = useState('');
-  const [lengths, setLengths] = useState<number[]>([]); // current element lengths (mm), from ReadElements
-  const [reading, setReading] = useState(false);
-  const [busyEl, setBusyEl] = useState<number | null>(null);
-  const [editingEl, setEditingEl] = useState<number | null>(null); // element whose mm is being typed
-  const [editVal, setEditVal] = useState('');
-  const run = (p: Promise<any>) => p.then(refetch).catch((e) => setErr(String(e?.message ?? e)));
-  const isUB = ant.type !== 'steppir';
-
-  const readLengths = useCallback(async () => {
-    setReading(true); setErr('');
-    try { setLengths(((await MotorReadElements()) ?? []) as number[]); }
-    catch (e: any) { setErr(String(e?.message ?? e)); }
-    finally { setReading(false); }
-  }, []);
-  // Read the current lengths once when the Ultrabeam widget mounts/connects, so
-  // +/- starts from the real values rather than blind.
-  useEffect(() => { if (isUB && ant.connected) readLengths(); }, [isUB, ant.connected, readLengths]);
-
-  // Send an absolute length to one element and remember it as the new baseline.
-  const setLen = async (i: number, mm: number) => {
-    const next = Math.max(0, Math.round(mm));
-    const prev = lengths[i] ?? 0;
-    setBusyEl(i); setErr('');
-    setLengths((ls) => { const c = [...ls]; c[i] = next; return c; }); // optimistic
-    try { await MotorSetElement(i, next); refetch(); }
-    catch (e: any) {
-      // Rejected by the controller — most often the element is at its travel
-      // limit for this band (extending on a low band). Revert the optimistic
-      // value so the display stays truthful, and explain the likely cause when
-      // the failed move was an extension.
-      setLengths((ls) => { const c = [...ls]; c[i] = prev; return c; });
-      setErr(next > prev ? t('station.atMax') : String(e?.message ?? e));
-    }
-    finally { setBusyEl(null); }
-  };
-  // Nudge one element by ±2 mm from its current known length.
-  const nudge = (i: number, delta: number) => setLen(i, (lengths[i] ?? 0) + delta);
-  // Commit a typed exact length (click on the mm value). Lets the operator fix
-  // the baseline when the auto-read is off, so +/- then work reliably.
-  const commitEdit = (i: number) => {
-    const v = parseInt(editVal, 10);
-    setEditingEl(null);
-    if (!isNaN(v) && v >= 0 && v !== lengths[i]) setLen(i, v);
-  };
-  const dirs: [number, string][] = [[0, 'N'], [1, '180°'], [2, t('station.bi')]];
-  return (
-    <div className="rounded-xl border border-border bg-card shadow-sm overflow-hidden h-full">
-      <div className="flex items-center gap-2 px-3 py-2 border-b border-border/60 bg-muted/30">
-        <AntennaIcon className="size-4 text-primary" />
-        <div className="min-w-0">
-          <div className="text-sm font-semibold truncate">{isUB ? 'Ultrabeam' : 'SteppIR'}</div>
-          {ant.frequency > 0 && <div className="text-[10px] text-muted-foreground font-mono">{(ant.frequency / 1000).toFixed(3)} MHz</div>}
-        </div>
-        {ant.moving && <span className="ml-auto text-[10px] font-semibold text-warning animate-pulse">{t('station.moving')}</span>}
-        <span className={cn('size-2 rounded-full shrink-0', ant.moving ? '' : 'ml-auto', ant.connected ? 'bg-success' : 'bg-muted-foreground/40')}
-          title={ant.connected ? t('station.online') : t('station.offline')} />
-      </div>
-      <div className="p-3 space-y-3">
-        <div>
-          <div className="text-[10px] font-semibold uppercase tracking-wider text-muted-foreground mb-1">{t('station.pattern')}</div>
-          <div className="flex gap-1">
-            {dirs.map(([d, lbl]) => (
-              <button key={d} type="button" disabled={!ant.connected}
-                onClick={() => run(SetUltrabeamDirection(d))}
-                className={cn('flex-1 rounded-md border py-1.5 text-xs font-semibold transition-colors disabled:opacity-40',
-                  ant.direction === d ? 'bg-primary text-primary-foreground border-primary' : 'border-border hover:bg-muted')}>
-                {lbl}
-              </button>
-            ))}
-          </div>
-        </div>
-        <button type="button" disabled={!ant.connected}
-          onClick={() => run(UltrabeamRetract())}
-          className="w-full flex items-center justify-center gap-1.5 rounded-md border border-warning-border bg-warning-muted text-warning-muted-foreground py-1.5 text-xs font-semibold hover:brightness-95 disabled:opacity-40">
-          <ArrowDownToLine className="size-3.5" /> {t('station.retract')}
-        </button>
-
-        {isUB && (
-          <div>
-            <div className="flex items-center gap-2 mb-1.5">
-              <span className="text-[10px] font-semibold uppercase tracking-wider text-muted-foreground">{t('station.elements')}</span>
-              <button type="button" onClick={readLengths} disabled={!ant.connected || reading}
-                className="text-[10px] text-primary hover:underline inline-flex items-center gap-1 disabled:opacity-40" title={t('station.readLengths')}>
-                <RefreshCw className={cn('size-3', reading && 'animate-spin')} /> {t('station.read')}
-              </button>
-            </div>
-            {lengths.length === 0 ? (
-              <p className="text-[11px] text-muted-foreground">{t('station.noLengths')}</p>
-            ) : (
-              <div className="space-y-1.5">
-                {/* The READ_BANDS reply is undocumented and its 16-bit parse picks
-                    up structural bytes past the real data (varying by band), which
-                    made 6+ bogus "elements" appear. Ultrabeam beams are 3-element,
-                    and ModifyElement addresses elements 0..2 — so show just those. */}
-                {lengths.map((mm, i) => ({ mm, i })).slice(0, 3).map(({ mm, i }) => (
-                  <div key={i} className="flex items-center gap-2">
-                    <span className="text-xs w-20 shrink-0 text-muted-foreground truncate">{elementName(i, t)}</span>
-                    <button type="button" disabled={!ant.connected || busyEl !== null}
-                      onClick={() => nudge(i, -ELEMENT_STEP)}
-                      className="flex items-center justify-center size-7 rounded-md border border-border hover:bg-muted disabled:opacity-40 shrink-0">
-                      <Minus className="size-3.5" />
-                    </button>
-                    {editingEl === i ? (
-                      <input autoFocus type="number" value={editVal}
-                        onChange={(e) => setEditVal(e.target.value)}
-                        onBlur={() => commitEdit(i)}
-                        onKeyDown={(e) => { if (e.key === 'Enter') commitEdit(i); if (e.key === 'Escape') setEditingEl(null); }}
-                        className="text-sm font-mono font-bold flex-1 min-w-0 text-center tabular-nums bg-transparent border border-primary rounded px-1" />
-                    ) : (
-                      <span className="text-sm font-mono font-bold flex-1 min-w-0 text-center tabular-nums cursor-pointer hover:underline"
-                        title={t('station.setExactLen')}
-                        onClick={() => { setEditingEl(i); setEditVal(String(mm)); }}>
-                        {busyEl === i ? <Loader2 className="size-3.5 animate-spin inline" /> : `${mm} mm`}
-                      </span>
-                    )}
-                    <button type="button" disabled={!ant.connected || busyEl !== null}
-                      onClick={() => nudge(i, ELEMENT_STEP)}
-                      className="flex items-center justify-center size-7 rounded-md border border-border hover:bg-muted disabled:opacity-40 shrink-0">
-                      <Plus className="size-3.5" />
-                    </button>
-                  </div>
-                ))}
-              </div>
-            )}
-            <p className="text-[10px] text-muted-foreground mt-1">{t('station.elementsHint')}</p>
-          </div>
-        )}
-        {err && <div className="text-[11px] text-destructive break-words">{err}</div>}
-      </div>
-    </div>
-  );
-}
 
 export function StationControlPanel({ centerLat, centerLon, bearing }: RotatorProps) {
   const { t } = useI18n();
@@ -269,6 +203,23 @@ export function StationControlPanel({ centerLat, centerLon, bearing }: RotatorPr
   // Max columns per row (persisted). "Auto" fills the window; a number caps the
   // row so cards wrap onto further lines even when there's horizontal room.
   const [cols, setCols] = useState<string>(() => localStorage.getItem('opslog.stationCols') || 'auto');
+
+  // How many columns the dashboard shows. "Auto" fits as many CARD_MIN-wide
+  // cards as the window allows; an explicit count is honoured as asked, even
+  // past that width — the operator can see his own screen.
+  const gridRef = useRef<HTMLDivElement | null>(null);
+  const [colCount, setColCount] = useState(1);
+
+  useLayoutEffect(() => {
+    if (cols !== 'auto') { setColCount(Number(cols) || 1); return; }
+    const el = gridRef.current;
+    if (!el) return;
+    const measure = () => setColCount(Math.max(1, Math.floor((el.clientWidth + GRID_GAP) / (CARD_MIN + GRID_GAP))));
+    measure();
+    const ro = new ResizeObserver(measure);
+    ro.observe(el);
+    return () => ro.disconnect();
+  }, [cols]);
   // Amplifiers (Settings → Amplifier): shown here so operators without a
   // FlexRadio panel still get the controls. EVERY configured amp gets its own
   // card (identical to the Flex panel's) — no dropdown. Polled fast (1.5s) so the
@@ -302,6 +253,32 @@ export function StationControlPanel({ centerLat, centerLon, bearing }: RotatorPr
     return () => { alive = false; window.clearInterval(id); };
   }, []);
 
+  // Bench power supply. Polled slower than the tuner: it has no meters that
+  // track a transmission, and every poll is three Modbus exchanges on a 9600
+  // baud line the operator may also be using to switch the output.
+  const [psu, setPsu] = useState<PSUState>({ connected: false, on: false, volts: 0, amps: 0, watts: 0, set_volts: 0, set_amps: 0, protected: 0 });
+  const [psuEnabled, setPsuEnabled] = useState(false);
+  const [psuBusy, setPsuBusy] = useState(false);
+  useEffect(() => {
+    let alive = true;
+    const load = async () => {
+      try { const en: any = await GetPSUSettings(); if (alive) setPsuEnabled(!!en?.enabled); } catch {}
+      try { const st: any = await GetPSUStatus(); if (alive && st) setPsu(st as PSUState); } catch {}
+    };
+    load();
+    const id = window.setInterval(load, 1500);
+    return () => { alive = false; window.clearInterval(id); };
+  }, []);
+  const togglePSU = useCallback(async (on: boolean) => {
+    setPsuBusy(true);
+    // No optimistic flip here, unlike the relays: the supply echoes the value it
+    // actually set, so showing ON before it confirms would be showing something
+    // OpsLog does not know. A power switch is the wrong place to guess.
+    try { await SetPSUOutput(on); const st: any = await GetPSUStatus(); if (st) setPsu(st as PSUState); }
+    catch { /* the poll will tell the truth */ }
+    finally { setPsuBusy(false); }
+  }, []);
+
   const loadDevices = useCallback(async () => {
     try { setDevices(((await GetStationDevices()) ?? []) as Device[]); } catch { /* db not ready */ }
   }, []);
@@ -312,19 +289,21 @@ export function StationControlPanel({ centerLat, centerLon, bearing }: RotatorPr
       setStatus(Object.fromEntries(s.map((d) => [d.id, d])));
     } catch { /* ignore transient */ }
   }, []);
-  const pollRot = useCallback(async () => {
-    try { setRot((await GetRotatorHeading()) as any); } catch { /* ignore */ }
-  }, []);
   const pollAnt = useCallback(async () => {
     try { setAnt((await GetUltrabeamStatus()) as any); } catch { /* ignore */ }
   }, []);
 
   useEffect(() => { loadDevices(); }, [loadDevices]);
+  // The heading comes from the shared poller: one loop for the whole app, fast
+  // while the antenna turns and slow while it is parked. Every poll opens and
+  // closes the controller's port, and this panel used to run its own alongside
+  // the status bar's — the same controller asked twice over.
+  useEffect(() => subscribeRotorHeading((h) => setRot(h as any)), []);
   useEffect(() => {
-    poll(); pollRot(); pollAnt();
+    poll(); pollAnt();
-    const id = window.setInterval(() => { poll(); pollRot(); pollAnt(); }, 3000);
+    const id = window.setInterval(() => { poll(); pollAnt(); }, 3000);
     return () => window.clearInterval(id);
-  }, [poll, pollRot, pollAnt, devices.length]);
+  }, [poll, pollAnt, devices.length]);
 
   const persistOrder = (next: string[]) => { setOrder(next); writeUiPref('opslog.stationOrder', JSON.stringify(next)); };
   // Reorder so `dragged` lands just before `target`.
@@ -372,16 +351,25 @@ export function StationControlPanel({ centerLat, centerLon, bearing }: RotatorPr
   const deviceCard = (dev: Device) => {
     const st = status[dev.id];
     const relays = st?.relays ?? dev.labels.map((label, i) => ({ number: i + 1, label, on: false }));
+    // The generic HTTP board has no address of its own and nothing to poll: its
+    // relays can each live on a different box, and no status endpoint is read
+    // back. So no host under the name, no online dot, and the buttons are never
+    // greyed out waiting for a connection that is never made.
+    const fireAndForget = dev.type === 'httpgen';
     return (
       <div className="rounded-xl border border-border bg-card shadow-sm overflow-hidden h-full">
         <div className="flex items-center gap-2 px-3 py-2 border-b border-border/60 bg-muted/30">
           <PlugZap className="size-4 text-primary" />
           <div className="min-w-0">
             <div className="text-sm font-semibold truncate">{dev.name || TYPE_LABEL[dev.type]}</div>
-            <div className="text-[10px] text-muted-foreground font-mono truncate">{TYPE_LABEL[dev.type]} · {dev.host}</div>
+            <div className="text-[10px] text-muted-foreground font-mono truncate">
+              {TYPE_LABEL[dev.type]}{fireAndForget || !dev.host ? '' : ` · ${dev.host}`}
+            </div>
           </div>
-          <span className={cn('ml-auto size-2 rounded-full shrink-0', st?.connected ? 'bg-success' : 'bg-muted-foreground/40')}
+          {fireAndForget ? <span className="ml-auto" /> : (
-            title={st?.connected ? t('station.online') : (st?.error || t('station.offline'))} />
+            <span className={cn('ml-auto size-2 rounded-full shrink-0', st?.connected ? 'bg-success' : 'bg-muted-foreground/40')}
+              title={st?.connected ? t('station.online') : (st?.error || t('station.offline'))} />
+          )}
           <button className="text-muted-foreground hover:text-foreground" title={t('station.edit')}
             onClick={() => setEditing({ ...dev, labels: [...dev.labels] })}><Pencil className="size-3.5" /></button>
           <button className="text-muted-foreground hover:text-destructive" title={t('station.delete')}
@@ -394,7 +382,7 @@ export function StationControlPanel({ centerLat, centerLon, bearing }: RotatorPr
             const key = `${dev.id}:${r.number}`;
             const label = r.label || `${t('station.relay')} ${r.number}`;
             return (
-              <button key={r.number} type="button" disabled={!st?.connected}
+              <button key={r.number} type="button" disabled={!fireAndForget && !st?.connected}
                 title={label}
                 onClick={() => toggle(dev, r.number, !r.on)}
                 className={cn('w-[150px] flex items-center gap-1.5 rounded-md border px-2 py-1 text-left transition-colors disabled:opacity-40',
@@ -415,13 +403,13 @@ export function StationControlPanel({ centerLat, centerLon, bearing }: RotatorPr
     );
   };
 
-  // `wide` cards span the whole dashboard instead of sitting in one masonry
+  // `wide` cards take two grid columns instead of one. The amplifier and tuner
-  // column. The amplifier and tuner carry meter rows and a channel selector that
+  // carry meter rows and a channel selector that are unreadable squeezed into a
-  // are unreadable squeezed into a ~430px column — they are the same cards the
+  // single ~430px column — they are the same cards the FlexRadio panel shows
-  // FlexRadio panel shows full-width, and they need that room here too.
+  // full-width, and they need that room here too.
   const widgets: { id: string; node: React.ReactNode; wide?: boolean }[] = [];
   if (rot.enabled) {
-    widgets.push({ id: 'rotator', node: <RotatorWidget hd={rot} refetch={pollRot} centerLat={centerLat} centerLon={centerLon} bearing={bearing} t={t} /> });
+    widgets.push({ id: 'rotator', node: <RotatorWidget hd={rot} refetch={pokeRotorHeading} centerLat={centerLat} centerLon={centerLon} bearing={bearing} t={t} /> });
   }
   if (ant.enabled) {
     widgets.push({ id: 'antenna', node: <MotorAntennaWidget ant={ant} refetch={pollAnt} t={t} /> });
@@ -430,6 +418,7 @@ export function StationControlPanel({ centerLat, centerLon, bearing }: RotatorPr
   for (const amp of amps) widgets.push({ id: `amp:${amp.id}`, node: <AmpCard amp={amp} flex={flexState} t={t} />, wide: true });
   // Tuner Genius XL card (identical to the Flex panel's).
   if (tgEnabled) widgets.push({ id: 'tuner', node: <TunerCard status={tg} t={t} />, wide: true });
+  if (psuEnabled) widgets.push({ id: 'psu', node: <PSUCard st={psu} busy={psuBusy} onToggle={togglePSU} t={t} /> });
   for (const dev of devices) widgets.push({ id: dev.id, node: deviceCard(dev) });
 
   const rank = (id: string) => { const i = order.indexOf(id); return i < 0 ? 1e6 : i; };
@@ -446,7 +435,7 @@ export function StationControlPanel({ centerLat, centerLon, bearing }: RotatorPr
           {/* Max columns per row: Auto fills the window; 1/2/3/4 cap the row so a
               card can sit on a further line even with horizontal room to spare. */}
           <div className="flex items-center rounded-md border border-border overflow-hidden text-[11px]">
-            {(['auto', '1', '2', '3', '4'] as const).map((c) => (
+            {(['auto', '1', '2', '3', '4', '5', '6'] as const).map((c) => (
               <button key={c} type="button"
                 onClick={() => { setCols(c); writeUiPref('opslog.stationCols', c); }}
                 className={cn('px-2 py-1 font-medium', cols === c ? 'bg-primary text-primary-foreground' : 'text-muted-foreground hover:bg-muted')}>
@@ -466,31 +455,36 @@ export function StationControlPanel({ centerLat, centerLon, bearing }: RotatorPr
         </div>
       )}
 
-      {/* Masonry dashboard: fixed-width cards flow into balanced CSS columns so
+      {/* Dashboard grid: equal columns, and every card stretches to the height of
-          they pack tightly by height (no ragged gaps under short cards). "Auto"
+          the tallest one on its row, so the rows line up instead of ending
-          fits as many ~430px columns as the window allows; a fixed count caps the
+          ragged. One column each, two for the amplifier/tuner whose meter rows
-          container width to that many columns. Each card has a grip handle (left
+          need the room. Each card has a grip handle (left rail) as the drag
-          rail) as the drag initiator (the body is full of buttons). */}
+          initiator, since the body is full of buttons. */}
-      <div style={{ columnWidth: '430px', columnGap: '1rem', columnFill: 'balance',
+      <div ref={gridRef} style={{
-        ...(cols !== 'auto' ? { maxWidth: `${Number(cols) * 446}px` } : {}) }}>
+        display: 'grid',
+        gridTemplateColumns: `repeat(${colCount}, minmax(0, 1fr))`,
+        gap: `${GRID_GAP}px`,
+      }}>
         {ordered.map((w) => (
-          // column-span:all lifts a wide card out of the columns and across the
+          <div key={w.id}
-          // full container, while keeping it in document order — so drag-reorder
+            // A wide card takes two columns — but never more than there are, or
-          // still works between wide and normal cards. Capped so it stays a card
+            // the grid would grow a phantom column on a narrow window.
-          // and not a banner on an ultra-wide window.
+            style={{ gridColumn: w.wide ? `span ${Math.min(2, colCount)}` : undefined }}
-          <div key={w.id} className="flex items-stretch break-inside-avoid mb-4"
-            style={w.wide ? { columnSpan: 'all', maxWidth: '900px' } : undefined}
             onDragOver={(e) => { if (dragId.current) { e.preventDefault(); e.dataTransfer.dropEffect = 'move'; } }}
             onDrop={(e) => { if (dragId.current) { e.preventDefault(); onDrop(w.id); } }}>
-            <div draggable
+            {/* h-full down the chain is what makes the card fill the row height
-              onDragStart={(e) => { dragId.current = w.id; e.dataTransfer.effectAllowed = 'move'; }}
+                rather than sit at its natural size in a taller cell. */}
-              onDragEnd={() => { dragId.current = null; }}
+            <div className="flex items-stretch h-full">
-              title={t('station.dragMove')}
+              <div draggable
-              className={cn('flex items-center shrink-0 px-0.5 rounded-l-xl cursor-grab active:cursor-grabbing text-muted-foreground/30 hover:text-muted-foreground hover:bg-muted/40 transition-colors',
+                onDragStart={(e) => { dragId.current = w.id; e.dataTransfer.effectAllowed = 'move'; }}
-                dragId.current === w.id && 'opacity-60')}>
+                onDragEnd={() => { dragId.current = null; }}
-              <GripVertical className="size-4" />
+                title={t('station.dragMove')}
+                className={cn('flex items-center shrink-0 px-0.5 rounded-l-xl cursor-grab active:cursor-grabbing text-muted-foreground/30 hover:text-muted-foreground hover:bg-muted/40 transition-colors',
+                  dragId.current === w.id && 'opacity-60')}>
+                <GripVertical className="size-4" />
+              </div>
+              <div className="flex-1 min-w-0 [&>*]:h-full">{w.node}</div>
             </div>
-            <div className="flex-1 min-w-0">{w.node}</div>
           </div>
         ))}
       </div>
@@ -523,8 +517,23 @@ function DeviceEditor({ device, onChange, onSave, onCancel, t }: {
     onChange({ ...device, channels, labels });
   };
   const isKM = device.type === 'kmtronic';
+  const isDingtian = device.type === 'dingtian';
   const isDenkovi = device.type === 'denkovi';
   const isUsbRelay = device.type === 'usbrelay';
+  const isHTTPGen = device.type === 'httpgen';
+  // {value} sends a relay's label, so a URL using it on an unnamed relay would
+  // go out with an empty parameter. Warn while it is being typed rather than at
+  // the moment an antenna fails to switch.
+  const valueNeedsLabels = isHTTPGen
+    && [...(device.on_urls ?? []), ...(device.off_urls ?? []), device.on_pattern ?? '', device.off_pattern ?? '']
+      .some((s) => (s ?? '').includes('{value}'))
+    && device.labels.some((l) => !l.trim());
+  // Any https:// among this board's URLs. A relay box on the LAN signs its own
+  // certificate, so HTTPS to one cannot be verified — the operator has to say
+  // whether to accept that, and the question only arises once they type https.
+  const usesHTTPS = isHTTPGen
+    && [...(device.on_urls ?? []), ...(device.off_urls ?? []), device.on_pattern ?? '', device.off_pattern ?? '']
+      .some((u) => (u ?? '').trim().toLowerCase().startsWith('https://'));
   // COM ports for the generic USB-serial relay picker.
   const [serialPorts, setSerialPorts] = useState<string[]>([]);
   useEffect(() => {
@@ -573,8 +582,10 @@ function DeviceEditor({ device, onChange, onSave, onCancel, t }: {
             <SelectContent>
               <SelectItem value="webswitch">WebSwitch 1216H (5 relays)</SelectItem>
               <SelectItem value="kmtronic">KMTronic 8-relay (LAN)</SelectItem>
+              <SelectItem value="dingtian">Dingtian IOT relay (LAN / WiFi)</SelectItem>
               <SelectItem value="denkovi">Denkovi USB (FT245 / D2XX)</SelectItem>
               <SelectItem value="usbrelay">Denkovi USB (serial / COM)</SelectItem>
+              <SelectItem value="httpgen">{t('station.typeHttpGen')}</SelectItem>
             </SelectContent>
           </Select>
         </div>
@@ -583,13 +594,13 @@ function DeviceEditor({ device, onChange, onSave, onCancel, t }: {
           <Input value={device.name} placeholder={TYPE_LABEL[device.type]} onChange={(e) => onChange({ ...device, name: e.target.value })} />
         </div>
       </div>
-      {(isDenkovi || isUsbRelay) && (
+      {(isDenkovi || isUsbRelay || isDingtian || isHTTPGen) && (
         <div className="space-y-1 max-w-[10rem]">
           <Label>{t('station.channels')}</Label>
           <Select value={String(chanCount(device))} onValueChange={(v) => setChannels(parseInt(v, 10))}>
             <SelectTrigger className="h-9"><SelectValue /></SelectTrigger>
             <SelectContent>
-              {(isDenkovi ? [4, 8] : [1, 2, 4, 8, 16]).map((n) => (
+              {(isDenkovi ? [4, 8] : isDingtian ? [2, 4, 8, 16, 24, 32] : [1, 2, 4, 8, 16]).map((n) => (
                 <SelectItem key={n} value={String(n)}>{n}</SelectItem>
               ))}
             </SelectContent>
@@ -631,12 +642,35 @@ function DeviceEditor({ device, onChange, onSave, onCancel, t }: {
           </div>
           <p className="text-[10px] text-muted-foreground">{t('station.usbRelayHint')}</p>
         </div>
-      ) : (
+      ) : isHTTPGen ? null : (
-      <div className={cn('grid gap-3', isKM ? 'grid-cols-3' : 'grid-cols-1')}>
+      /* No Host for the generic board: its driver never reads one. Each URL
-        <div className={cn('space-y-1', isKM ? '' : 'max-w-xs')}>
+         below carries its own address, and they need not even share it — one
+         relay can sit on a different box from the next. A field that changes
+         nothing is worse than no field: it reads as the thing to fill in first,
+         and then the URLs look like they should be relative to it. */
+      <div className={cn('grid gap-3', (isKM || isDingtian) ? 'grid-cols-3' : 'grid-cols-1')}>
+        <div className={cn('space-y-1', (isKM || isDingtian) ? '' : 'max-w-xs')}>
           <Label>{t('station.host')}</Label>
           <Input className="font-mono" value={device.host} placeholder="192.168.1.100" onChange={(e) => onChange({ ...device, host: e.target.value })} />
+          <span className="text-[10px] text-muted-foreground">{t('station.hostHint')}</span>
         </div>
+        {/* Dingtian: both are OFF on a factory board — the session ID only when
+            "HTTP Session" is enabled in its web page, the password only when a
+            relay password is set. */}
+        {isDingtian && (
+          <>
+            <div className="space-y-1">
+              <Label>{t('station.dtSession')}</Label>
+              <Input className="font-mono" value={device.user ?? ''} placeholder={t('station.optional')}
+                onChange={(e) => onChange({ ...device, user: e.target.value })} />
+            </div>
+            <div className="space-y-1">
+              <Label>{t('station.dtPwd')}</Label>
+              <Input className="font-mono" value={device.pass ?? ''} placeholder="0"
+                onChange={(e) => onChange({ ...device, pass: e.target.value.replace(/[^0-9]/g, '') })} />
+            </div>
+          </>
+        )}
         {isKM && (
           <>
             <div className="space-y-1">
@@ -651,8 +685,76 @@ function DeviceEditor({ device, onChange, onSave, onCancel, t }: {
         )}
       </div>
       )}
+      {/* Generic HTTP board: a URL to switch each relay on and one to switch it
+          off. Two ways to fill it, and the per-relay one is why this type
+          exists — a hand-made switch often has URLs with nothing in common
+          between channels, which no pattern can express. */}
+      {isHTTPGen && (
+        <div className="space-y-3 rounded-md border border-border/60 p-3">
+          <div className="grid grid-cols-2 gap-3">
+            <div className="space-y-1">
+              <Label>{t('station.onPattern')}</Label>
+              <Input className="font-mono text-xs" placeholder="http://192.168.1.9/relay?n={relay}&state=on"
+                value={device.on_pattern ?? ''}
+                onChange={(e) => onChange({ ...device, on_pattern: e.target.value })} />
+            </div>
+            <div className="space-y-1">
+              <Label>{t('station.offPattern')}</Label>
+              <Input className="font-mono text-xs" placeholder="http://192.168.1.9/relay?n={relay}&state=off"
+                value={device.off_pattern ?? ''}
+                onChange={(e) => onChange({ ...device, off_pattern: e.target.value })} />
+            </div>
+          </div>
+          <div className="text-[10px] text-muted-foreground">{t('station.patternHint')}</div>
+          {/* Shown only once an https:// URL is actually in use. A board on
+              plain HTTP has no certificate to argue about, and an option that
+              cannot matter yet is one more thing to wonder about. */}
+          {usesHTTPS && (
+            <label className="flex items-start gap-2 text-xs cursor-pointer">
+              <Checkbox className="mt-0.5" checked={!!device.insecure_tls}
+                onCheckedChange={(c) => onChange({ ...device, insecure_tls: !!c })} />
+              <span>
+                {t('station.insecureTls')}
+                <span className="block text-[10px] text-muted-foreground">{t('station.insecureTlsHint')}</span>
+              </span>
+            </label>
+          )}
+          <div className="space-y-1">
+            <Label>{t('station.perRelayUrls')}</Label>
+            <div className="space-y-1">
+              {device.labels.map((_, i) => (
+                <div key={i} className="grid grid-cols-[2.5rem_1fr_1fr] items-center gap-2">
+                  <span className="text-[11px] text-muted-foreground">{i + 1}</span>
+                  <Input className="h-8 font-mono text-[11px]" placeholder={t('station.onUrlPh')}
+                    value={device.on_urls?.[i] ?? ''}
+                    onChange={(e) => {
+                      const on_urls = [...(device.on_urls ?? [])];
+                      while (on_urls.length < device.labels.length) on_urls.push('');
+                      on_urls[i] = e.target.value;
+                      onChange({ ...device, on_urls });
+                    }} />
+                  <Input className="h-8 font-mono text-[11px]" placeholder={t('station.offUrlPh')}
+                    value={device.off_urls?.[i] ?? ''}
+                    onChange={(e) => {
+                      const off_urls = [...(device.off_urls ?? [])];
+                      while (off_urls.length < device.labels.length) off_urls.push('');
+                      off_urls[i] = e.target.value;
+                      onChange({ ...device, off_urls });
+                    }} />
+                </div>
+              ))}
+            </div>
+            <div className="text-[10px] text-muted-foreground">{t('station.perRelayHint')}</div>
+          </div>
+        </div>
+      )}
+
       <div className="space-y-1">
         <Label>{t('station.labels')}</Label>
+        {/* {value} sends the label, so an unnamed relay would go out as "?on=".
+            Said here, beside the empty box, rather than when the antenna fails
+            to switch and the log is the only place that explains why. */}
+        {valueNeedsLabels && <p className="text-[10px] text-warning">{t('station.valueNeedsLabels')}</p>}
         <div className="grid grid-cols-4 gap-2">
           {device.labels.map((lab, i) => (
             <Input key={i} value={lab} placeholder={`${t('station.relay')} ${i + 1}`} className="h-8 text-xs"
@@ -668,12 +770,20 @@ function DeviceEditor({ device, onChange, onSave, onCancel, t }: {
           </span>
         )}
         <div className="ml-auto flex gap-2">
-          <Button size="sm" variant="outline" onClick={testDevice} disabled={testing || !device.host.trim()}>
+          {/* No connection test for the generic board, and no host required to
-            {testing ? <Loader2 className="size-3.5 mr-1 animate-spin" /> : <PlugZap className="size-3.5 mr-1" />}
+              save it. There is nothing to test: it has no address of its own and
-            {t('station.test')}
+              no status to read — its URLs are fired and forgotten. A button that
-          </Button>
+              can only ever say "OK, 4 relays" tests nothing, and a Save greyed
+              out for a missing host made a perfectly complete configuration —
+              four full URLs — impossible to store. */}
+          {!isHTTPGen && (
+            <Button size="sm" variant="outline" onClick={testDevice} disabled={testing || !device.host.trim()}>
+              {testing ? <Loader2 className="size-3.5 mr-1 animate-spin" /> : <PlugZap className="size-3.5 mr-1" />}
+              {t('station.test')}
+            </Button>
+          )}
           <Button size="sm" variant="ghost" onClick={onCancel}><X className="size-3.5 mr-1" />{t('station.cancel')}</Button>
-          <Button size="sm" onClick={onSave} disabled={!device.host.trim()}><Check className="size-3.5 mr-1" />{t('station.save')}</Button>
+          <Button size="sm" onClick={onSave} disabled={!isHTTPGen && !device.host.trim()}><Check className="size-3.5 mr-1" />{t('station.save')}</Button>
         </div>
       </div>
     </div>

frontend/src/components/StatsPanel.tsx

@@ -29,6 +29,7 @@ type ContestRun = { id: string; year: number; count: number; start: string; end:
 type Stats = {
   total: number; unique_calls: number; entities: number; continents: number;
   first_qso: string; last_qso: string;
+  last_new_dxcc: string; last_new_dxcc_num: number; last_new_dxcc_call: string; last_new_dxcc_date: string;
   confirmed_lotw: number; confirmed_eqsl: number; confirmed_qsl: number; confirmed_any: number;
   by_mode: Bucket[]; by_band: Bucket[]; by_band_category: BandCat[]; by_operator: Bucket[]; by_station: Bucket[];
   by_continent: Bucket[]; top_entities: Bucket[]; by_year: Bucket[]; by_month: Bucket[];
@@ -681,6 +682,16 @@ export function StatsPanel() {
   // real operating session (which is exactly when an hourly rate chart exists).
   const windowed = contest !== '' || (period === 'custom' && (stats?.rate?.length ?? 0) > 1);
 
+  // "last new: France - F5ABC - 2019-03-01": the entity most recently added to
+  // the log, and the contact that added it. Empty when no dated entity exists.
+  const lastNew = useMemo(() => {
+    if (!stats?.last_new_dxcc_date) return '';
+    const day = stats.last_new_dxcc_date.slice(0, 10);
+    const who = stats.last_new_dxcc_call ? ` · ${stats.last_new_dxcc_call}` : '';
+    const what = stats.last_new_dxcc || String(stats.last_new_dxcc_num || '');
+    return `${t('stats.lastNewDxcc')}: ${what}${who} · ${day}`;
+  }, [stats, t]);
+
   const span = useMemo(() => {
     if (!stats?.first_qso) return '';
     const f = new Date(stats.first_qso), l = new Date(stats.last_qso);
@@ -774,7 +785,11 @@ export function StatsPanel() {
       <div className="grid grid-cols-2 md:grid-cols-5 gap-2.5 mb-3">
         <StatTile label={t('stats.qsos')} value={nf(stats.total)} sub={span} accent="var(--chart-1)" />
         <StatTile label={t('stats.uniqueCalls')} value={nf(stats.unique_calls)} accent="var(--chart-2)" />
-        <StatTile label={t('stats.entities')} value={nf(stats.entities)} sub="DXCC" accent="var(--chart-5)" />
+        {/* The last one ADDED rides on the entities tile: it is the same
+            subject, and a tile of its own would push the five headline figures
+            onto two rows for one line of text. */}
+        <StatTile label={t('stats.entities')} value={nf(stats.entities)}
+          sub={lastNew || "DXCC"} accent="var(--chart-5)" />
         <StatTile label={t('stats.continents')} value={nf(stats.continents)} sub="/ 7" accent="var(--chart-8)" />
         <StatTile label={t('stats.confirmed')} value={`${stats.total ? ((stats.confirmed_any / stats.total) * 100).toFixed(0) : 0}%`}
           sub={`${nf(stats.confirmed_any)} / ${nf(stats.total)}`} accent="var(--success)" />

frontend/src/components/TunerCard.tsx

@@ -76,13 +76,16 @@ export function TunerCard({ status, t }: { status: TGStatus; t: (k: string, v?:
   const peakHold = (key: string, val: number) => {
     const now = Date.now();
     const p = peak.current[key];
-    if (!p || val >= p.v || now - p.t > 2000) { peak.current[key] = { v: val, t: now }; return val; }
+    if (!p || val >= p.v || now - p.t > 1000) { peak.current[key] = { v: val, t: now }; return val; }
     return p.v;
   };
 
   const connected = !!status.connected;
   const rawVswr = status.vswr && status.vswr > 0 ? status.vswr : undefined;
-  const rawFwdW = status.fwd_w && status.fwd_w >= 1 ? status.fwd_w : 0;
+  // Prefer the device's own peak detector over the sampled reading; the JS hold
+  // below still smooths what is left between polls.
+  const rawPeak = Math.max(status.peak_w ?? 0, status.fwd_w ?? 0);
+  const rawFwdW = rawPeak >= 1 ? rawPeak : 0;
   const fwdW = peakHold('fwd', rawFwdW);
 
   // SWR needs RF to mean anything: sampled on receive the device reports a
@@ -93,13 +96,14 @@ export function TunerCard({ status, t }: { status: TGStatus; t: (k: string, v?:
   // That expiry is the point: the first version of this held the last TX value
   // with no timeout at all, so the meter sat frozen on the previous transmission
   // indefinitely — reading 1.39:1 with the radio plainly in RX and 0 W forward.
-  // Same 2 s window as the power peak above, so the two meters clear together.
+  // Same one-second window as the power peak above, so the two meters clear
+  // together.
   const swrHold = useRef<{ v: number; t: number } | null>(null);
   if (rawFwdW >= 1 && rawVswr) swrHold.current = { v: rawVswr, t: Date.now() };
   const heldSwr = swrHold.current;
   const vswr = rawFwdW >= 1
     ? rawVswr
-    : heldSwr && Date.now() - heldSwr.t < 2000
+    : heldSwr && Date.now() - heldSwr.t < 1000
       ? heldSwr.v
       : undefined;
   const active = status.active ?? 1;

frontend/src/components/TunerGeniusPanel.tsx

@@ -8,7 +8,7 @@ export type TGChannel = {
 };
 export type TGStatus = {
   connected: boolean; host?: string; last_error?: string;
-  fwd_dbm?: number; fwd_w?: number; swr_db?: number; vswr?: number; freq_mhz?: number;
+  fwd_dbm?: number; fwd_w?: number; peak_w?: number; swr_db?: number; vswr?: number; freq_mhz?: number;
   operate?: boolean; bypass?: boolean; tuning?: boolean; active?: number;
   antenna?: number; three_way?: boolean; message?: string;
   a?: TGChannel; b?: TGChannel;
@@ -69,6 +69,10 @@ export function TunerGeniusPanel({ status, onTune, onBypass, onOperate, onActiva
   const { t } = useI18n();
   const vswr = status.vswr && status.vswr > 0 ? status.vswr : undefined;
   const active = status.active ?? 1;
+  // The device's own peak, not the instantaneous reading: a 400 ms poll lands
+  // between syllables as often as on a peak, so the plain figure showed a few
+  // hundred watts on a kilowatt transmission.
+  const fwdW = Math.max(status.peak_w ?? 0, status.fwd_w ?? 0);
 
   return (
     <div className="h-full flex flex-col rounded-xl border border-border bg-gradient-to-b from-card to-muted/30 shadow-sm overflow-hidden">
@@ -103,7 +107,7 @@ export function TunerGeniusPanel({ status, onTune, onBypass, onOperate, onActiva
             <div className="rounded-lg border border-border bg-card/70 px-2 py-1.5 text-center">
               <div className="text-[9px] uppercase tracking-wider text-muted-foreground">{t('tgp.power')}</div>
               <div className="text-lg font-bold font-mono leading-tight text-foreground/80">
-                {status.fwd_w && status.fwd_w >= 1 ? `${Math.round(status.fwd_w)} W` : '—'}
+                {fwdW >= 1 ? `${Math.round(fwdW)} W` : '—'}
               </div>
             </div>
           </div>

frontend/src/components/UDPIntegrationsPanel.tsx

@@ -1,4 +1,4 @@
-import { useCallback, useEffect, useState } from 'react';
+import React, { useCallback, useEffect, useState } from 'react';
 import { Plus, Trash2, Edit2, RefreshCcw, ArrowDownToLine, ArrowUpFromLine } from 'lucide-react';
 import {
   ListUDPIntegrations, SaveUDPIntegration, DeleteUDPIntegration, ReloadUDPIntegrations,
@@ -24,7 +24,13 @@ type UDPConfig = {
   direction: 'inbound' | 'outbound';
   name: string;
   port: number;
-  service_type: 'wsjt' | 'adif' | 'n1mm' | 'remote_call' | 'db_updated' | 'pstrotator_freq' | 'n1mm_radioinfo';
+  service_type: 'wsjt' | 'adif' | 'n1mm' | 'remote_call' | 'db_updated' | 'pstrotator_freq' | 'n1mm_radioinfo' | 'wsjt_log' | 'wsjt_relay' | 'custom';
+  // Custom rows only.
+  trigger?: string;
+  template?: string;
+  transport?: string;
+  url?: string;
+  line_end?: string;
   multicast: boolean;
   multicast_group: string;
   destination_ip: string;
@@ -77,6 +83,41 @@ const SERVICE_TYPES: Array<{
     hint: 'udpp.svcDbHint',
     defaults: { port: 2333, destination_ip: '127.0.0.1' },
   },
+  {
+    // Announces the QSO on the WSJT-X UDP interface instead of as plain text.
+    // Named for the protocol, not for one program: Logger32 is what it was
+    // built against, but anything listening on that interface takes it, and a
+    // label saying "Logger32" would have every other operator scroll past.
+    // 2250 is Logger32's first additional socket — a starting point, not a rule.
+    id: 'wsjt_log',
+    direction: 'outbound',
+    label: 'udpp.svcWsjtLogLabel',
+    hint: 'udpp.svcWsjtLogHint',
+    defaults: { port: 2250, destination_ip: '127.0.0.1' },
+  },
+  {
+    // Feeds a SECOND application the stream this OpsLog receives. WSJT-X, JTDX
+    // and MSHV each send to ONE address, so without a relay the choice is
+    // between OpsLog and JTAlert/GridTracker rather than both.
+    //
+    // 2238 by default: beside the 2237 the sender uses, and free. Pointing it AT
+    // 2237 would name an OpsLog listener, which the relay refuses.
+    id: 'wsjt_relay',
+    direction: 'outbound',
+    label: 'udpp.svcWsjtRelayLabel',
+    hint: 'udpp.svcWsjtRelayHint',
+    defaults: { port: 2238, destination_ip: '127.0.0.1' },
+  },
+  {
+    // The general case: the operator picks the moment and writes the message.
+    // Mainly for antenna switches, which are driven by a URL and want the band
+    // change — but nothing about it is specific to them.
+    id: 'custom',
+    direction: 'outbound',
+    label: 'udpp.svcCustomLabel',
+    hint: 'udpp.svcCustomHint',
+    defaults: { port: 12000, destination_ip: '127.0.0.1' },
+  },
   {
     id: 'pstrotator_freq',
     direction: 'outbound',
@@ -93,6 +134,27 @@ const SERVICE_TYPES: Array<{
   },
 ];
 
+// The fields each trigger carries, and NOTHING else.
+//
+// This list is the point of the whole feature. A rotation has no frequency, a
+// lookup has no report — and a placeholder the trigger cannot fill renders as
+// nothing at all. Without seeing what is available, an operator writes {freq}
+// on a band change, gets an empty string, and has no way to learn why. So the
+// panel prints them under the box, for the trigger actually selected.
+const TRIGGER_FIELDS: Record<string, string[]> = {
+  qso_logged: ['call', 'band', 'band_m', 'mode', 'freq_hz', 'freq_mhz', 'grid', 'name', 'country', 'dxcc', 'rst_s', 'rst_r', 'comment', 'date', 'time'],
+  rotator_goto: ['az', 'el', 'path'],
+  lookup_done: ['call', 'name', 'grid', 'country', 'qth', 'state', 'dxcc'],
+  band_change: ['band', 'band_m', 'freq_hz', 'freq_mhz', 'mode'],
+};
+
+const TRIGGERS = [
+  { id: 'band_change', label: 'udpp.trgBand' },
+  { id: 'qso_logged', label: 'udpp.trgQso' },
+  { id: 'rotator_goto', label: 'udpp.trgRotator' },
+  { id: 'lookup_done', label: 'udpp.trgLookup' },
+];
+
 type Props = { onError: (msg: string) => void };
 
 export function UDPIntegrationsPanel({ onError }: Props) {
@@ -124,6 +186,7 @@ export function UDPIntegrationsPanel({ onError }: Props) {
       destination_ip: preset.defaults.destination_ip ?? '',
       enabled: true,
       sort_order: items.filter((i) => i.direction === direction).length,
+      trigger: '', template: '', transport: 'udp', url: '', line_end: '',
     });
   }
 
@@ -376,7 +439,7 @@ function EditDialog({
             </div>
           )}
 
-          {draft.direction === 'outbound' && (
+          {draft.direction === 'outbound' && draft.service_type !== 'custom' && (
             <div className="space-y-1">
               <Label>{t('udpp.destinationIp')}</Label>
               <Input
@@ -388,6 +451,10 @@ function EditDialog({
             </div>
           )}
 
+          {draft.service_type === 'custom' && (
+            <CustomFields draft={draft} setDraft={setDraft} />
+          )}
+
           <label className="flex items-center gap-2 text-sm cursor-pointer">
             <Checkbox
               checked={draft.enabled}
@@ -413,3 +480,108 @@ function EditDialog({
 
 // silence unused-import for cn — kept for future styling tweaks
 void cn;
+
+// CustomFields is the editor for a custom outbound row: what fires it, how it
+// leaves, and what it says.
+function CustomFields({ draft, setDraft }: {
+  draft: UDPConfig;
+  setDraft: React.Dispatch<React.SetStateAction<UDPConfig>>;
+}) {
+  const { t } = useI18n();
+  const fields = TRIGGER_FIELDS[draft.trigger ?? ''] ?? [];
+  const isURL = draft.transport === 'url';
+  return (
+    <div className="space-y-4 rounded-md border border-border/60 p-3">
+      <div className="grid grid-cols-2 gap-3">
+        <div className="space-y-1">
+          <Label>{t('udpp.trigger')}</Label>
+          <Select value={draft.trigger || 'band_change'} onValueChange={(v) => setDraft((d) => ({ ...d, trigger: v }))}>
+            <SelectTrigger><SelectValue /></SelectTrigger>
+            <SelectContent>
+              {TRIGGERS.map((x) => <SelectItem key={x.id} value={x.id}>{t(x.label)}</SelectItem>)}
+            </SelectContent>
+          </Select>
+        </div>
+        <div className="space-y-1">
+          <Label>{t('udpp.transport')}</Label>
+          <Select value={draft.transport || 'udp'} onValueChange={(v) => setDraft((d) => ({ ...d, transport: v }))}>
+            <SelectTrigger><SelectValue /></SelectTrigger>
+            <SelectContent>
+              <SelectItem value="udp">{t('udpp.transportUdp')}</SelectItem>
+              <SelectItem value="url">{t('udpp.transportUrl')}</SelectItem>
+            </SelectContent>
+          </Select>
+        </div>
+      </div>
+
+      {/* The one place these two features overlap. A relay board is a STATE per
+          band, not an event: Station Control tracks it, reads the boards at
+          startup and does not re-switch while the VFO moves inside a band. A
+          URL fired on a band change has none of that, and building the mapping
+          by hand here is work that is already done there. */}
+      {draft.trigger === 'band_change' && isURL && (
+        <div className="rounded border border-warning-border bg-warning-muted px-2 py-1.5 text-[11px] text-warning-muted-foreground leading-relaxed">
+          {t('udpp.relayInstead')}
+        </div>
+      )}
+
+      {isURL ? (
+        <div className="space-y-1">
+          <Label>{t('udpp.url')}</Label>
+          <Input
+            className="font-mono text-xs"
+            placeholder="http://192.168.1.50/antenna?band={band}"
+            value={draft.url ?? ''}
+            onChange={(e) => setDraft((d) => ({ ...d, url: e.target.value }))}
+          />
+          <div className="text-[10px] text-muted-foreground">{t('udpp.urlHint')}</div>
+        </div>
+      ) : (
+        <>
+          <div className="grid grid-cols-[1fr_auto] gap-2">
+            <div className="space-y-1">
+              <Label>{t('udpp.destinationIp')}</Label>
+              <Input
+                className="font-mono"
+                placeholder="127.0.0.1"
+                value={draft.destination_ip}
+                onChange={(e) => setDraft((d) => ({ ...d, destination_ip: e.target.value }))}
+              />
+            </div>
+            <div className="space-y-1">
+              <Label>{t('udpp.lineEnd')}</Label>
+              <Select value={draft.line_end || 'none'} onValueChange={(v) => setDraft((d) => ({ ...d, line_end: v === 'none' ? '' : v }))}>
+                <SelectTrigger className="w-28"><SelectValue /></SelectTrigger>
+                <SelectContent>
+                  <SelectItem value="none">{t('udpp.lineEndNone')}</SelectItem>
+                  <SelectItem value="lf">LF</SelectItem>
+                  <SelectItem value="crlf">CRLF</SelectItem>
+                </SelectContent>
+              </Select>
+            </div>
+          </div>
+          <div className="space-y-1">
+            <Label>{t('udpp.template')}</Label>
+            <textarea
+              className="w-full min-h-[64px] rounded-md border border-input bg-background px-2 py-1.5 font-mono text-xs"
+              placeholder="<AZIMUT>{az}</AZIMUT>"
+              value={draft.template ?? ''}
+              onChange={(e) => setDraft((d) => ({ ...d, template: e.target.value }))}
+            />
+          </div>
+        </>
+      )}
+
+      {/* What this trigger can actually fill in. */}
+      <div className="space-y-1">
+        <div className="text-[10px] uppercase tracking-wider text-muted-foreground">{t('udpp.fieldsAvailable')}</div>
+        <div className="flex flex-wrap gap-1">
+          {fields.map((f) => (
+            <code key={f} className="rounded bg-muted px-1 py-px text-[10px] text-muted-foreground">{`{${f}}`}</code>
+          ))}
+        </div>
+        <div className="text-[10px] text-muted-foreground">{t('udpp.fieldsHint')}</div>
+      </div>
+    </div>
+  );
+}

frontend/src/components/WebPublishPanel.tsx

@@ -0,0 +1,275 @@
+import { useEffect, useState } from 'react';
+import { Upload, FolderOpen, Loader2, ChevronsUpDown } from 'lucide-react';
+import {
+  GetWebPublishConfig, SaveWebPublishConfig, WebPublishColumns,
+  TestWebPublishFTP, PublishLogNow, GetWebPublishStatus, PickBackupFolder,
+} from '../../wailsjs/go/main/App';
+import { Button } from '@/components/ui/button';
+import { Input } from '@/components/ui/input';
+import { Label } from '@/components/ui/label';
+import { Checkbox } from '@/components/ui/checkbox';
+import { Select, SelectTrigger, SelectValue, SelectContent, SelectItem } from '@/components/ui/select';
+import {
+  DropdownMenu, DropdownMenuTrigger, DropdownMenuContent, DropdownMenuCheckboxItem,
+} from '@/components/ui/dropdown-menu';
+import { useI18n } from '@/lib/i18n';
+import { cn } from '@/lib/utils';
+
+type Cfg = {
+  enabled: boolean; format: string; folder: string; file_name: string; title: string;
+  count: number; interval_min: number; columns: string[];
+  ftp_enabled: boolean; ftp_host: string; ftp_port: number; ftp_user: string;
+  ftp_password: string; ftp_tls: boolean; ftp_folder: string; ftp_file_name: string;
+};
+type Col = { key: string; header: string; group: string };
+
+export function WebPublishPanel() {
+  const { t } = useI18n();
+  const [cfg, setCfg] = useState<Cfg | null>(null);
+  const [cols, setCols] = useState<Col[]>([]);
+  // The catalogue is 123 fields, so the picker is a dropdown with a search box
+  // rather than anything laid out on the page. Chosen columns stay visible above
+  // it, in publication order: after picking eight out of a hundred the question
+  // stops being 'what exists' and becomes 'what did I pick, and how will it print'.
+  const [colSearch, setColSearch] = useState('');
+  const [busy, setBusy] = useState<'' | 'test' | 'publish'>('');
+  const [msg, setMsg] = useState('');
+  const [err, setErr] = useState('');
+  // Raw text for the two numeric boxes: bound straight to the number they could
+  // not be cleared, the same trap as the Recent-QSOs Max field.
+  const [countText, setCountText] = useState('');
+  const [everyText, setEveryText] = useState('');
+
+  useEffect(() => {
+    (async () => {
+      try {
+        const [c, k, st] = await Promise.all([GetWebPublishConfig(), WebPublishColumns(), GetWebPublishStatus()]);
+        setCfg(c as any);
+        setCols((k ?? []) as Col[]);
+        setCountText(String((c as any).count ?? 100));
+        setEveryText(String((c as any).interval_min ?? 0));
+        const s: any = st;
+        if (s?.last_err) setErr(s.last_err);
+        else if (s?.last_run) setMsg(t('wpub.lastRun') + ' ' + s.last_run);
+      } catch (e: any) { setErr(String(e?.message ?? e)); }
+    })();
+    // eslint-disable-next-line react-hooks/exhaustive-deps
+  }, []);
+
+  if (!cfg) return <p className="text-xs text-muted-foreground">…</p>;
+  const set = (p: Partial<Cfg>) => setCfg((c) => (c ? { ...c, ...p } : c));
+
+  // Every control saves immediately: this panel has no Save button of its own,
+  // matching the other "saved instantly" panels.
+  const save = async (next: Cfg) => {
+    setCfg(next);
+    try { await SaveWebPublishConfig(next as any); setErr(''); }
+    catch (e: any) { setErr(String(e?.message ?? e)); }
+  };
+  const patch = (p: Partial<Cfg>) => save({ ...cfg, ...p });
+
+  const toggleCol = (key: string) => {
+    const has = cfg.columns?.includes(key);
+    patch({ columns: has ? cfg.columns.filter((c) => c !== key) : [...(cfg.columns ?? []), key] });
+  };
+
+  const run = async (what: 'test' | 'publish') => {
+    setBusy(what); setMsg(''); setErr('');
+    try {
+      const r = what === 'test' ? await TestWebPublishFTP(cfg as any) : await PublishLogNow();
+      setMsg(String(r));
+    } catch (e: any) { setErr(String(e?.message ?? e)); }
+    finally { setBusy(''); }
+  };
+
+  return (
+    <div className="space-y-4 max-w-3xl">
+      <p className="text-xs text-muted-foreground leading-relaxed">{t('wpub.hint')}</p>
+
+      <label className="flex items-center gap-2 text-sm cursor-pointer">
+        <Checkbox checked={cfg.enabled} onCheckedChange={(c) => patch({ enabled: !!c })} />
+        {t('wpub.enable')}
+      </label>
+
+      {cfg.enabled && (<>
+        {/* ── The file ── */}
+        <div className="space-y-2 border-t border-border/60 pt-3">
+          <Label className="text-xs font-semibold">{t('wpub.fileSection')}</Label>
+          <div className="grid grid-cols-[130px_1fr] gap-2 items-center">
+            <Label className="text-sm">{t('wpub.format')}</Label>
+            <Select value={cfg.format} onValueChange={(v) => patch({ format: v })}>
+              <SelectTrigger className="h-8 w-56"><SelectValue /></SelectTrigger>
+              <SelectContent>
+                <SelectItem value="html">{t('wpub.formatHtml')}</SelectItem>
+                <SelectItem value="csv">{t('wpub.formatCsv')}</SelectItem>
+              </SelectContent>
+            </Select>
+
+            <Label className="text-sm">{t('wpub.folder')}</Label>
+            <div className="flex gap-2">
+              <Input className="h-8 font-mono text-xs flex-1" value={cfg.folder}
+                onChange={(e) => set({ folder: e.target.value })} onBlur={() => patch({ folder: cfg.folder })} />
+              <Button variant="outline" size="sm" className="h-8" onClick={async () => {
+                try { const p = await PickBackupFolder(); if (p) patch({ folder: p }); } catch { /* cancelled */ }
+              }}><FolderOpen className="size-3.5" /> {t('wpub.browse')}</Button>
+            </div>
+
+            <Label className="text-sm">{t('wpub.fileName')}</Label>
+            <Input className="h-8 w-56 font-mono text-xs" value={cfg.file_name}
+              onChange={(e) => set({ file_name: e.target.value })} onBlur={() => patch({ file_name: cfg.file_name })} />
+
+            <Label className="text-sm">{t('wpub.title')}</Label>
+            <Input className="h-8" placeholder={t('wpub.titlePh')} value={cfg.title}
+              onChange={(e) => set({ title: e.target.value })} onBlur={() => patch({ title: cfg.title })} />
+
+            <Label className="text-sm">{t('wpub.count')}</Label>
+            <Input type="number" min={1} max={100000} className="h-8 w-28 font-mono text-xs" value={countText}
+              onChange={(e) => setCountText(e.target.value)}
+              onBlur={() => {
+                const n = Math.floor(Number(countText));
+                if (Number.isFinite(n) && n > 0) patch({ count: n }); else setCountText(String(cfg.count));
+              }} />
+
+            <Label className="text-sm">{t('wpub.every')}</Label>
+            <div className="flex items-center gap-2">
+              <Input type="number" min={0} max={1440} className="h-8 w-28 font-mono text-xs" value={everyText}
+                onChange={(e) => setEveryText(e.target.value)}
+                onBlur={() => {
+                  const n = Math.floor(Number(everyText));
+                  if (Number.isFinite(n) && n >= 0) patch({ interval_min: n }); else setEveryText(String(cfg.interval_min));
+                }} />
+              <span className="text-xs text-muted-foreground">{t('wpub.everyHint')}</span>
+            </div>
+          </div>
+        </div>
+
+        {/* ── Columns ── */}
+        <div className="space-y-2 border-t border-border/60 pt-3">
+          <div className="flex items-center justify-between">
+            <Label className="text-xs font-semibold">{t('wpub.columns')}</Label>
+            <span className="text-[11px] text-muted-foreground">
+              {t('wpub.columnsCount', { n: cfg.columns?.length ?? 0, total: cols.length })}
+            </span>
+          </div>
+
+          {/* CHOSEN, in publication order — this is the list that answers "what
+              will the page look like", which a sectioned catalogue cannot. */}
+          {(cfg.columns?.length ?? 0) > 0 && (
+            <div className="flex flex-wrap gap-1.5">
+              {cfg.columns.map((k) => {
+                const c = cols.find((x) => x.key === k);
+                return (
+                  <button key={k} type="button" onClick={() => toggleCol(k)}
+                    title={t('wpub.removeColumn')}
+                    className="px-2 py-0.5 rounded-full border border-primary bg-primary text-primary-foreground text-[11px] font-medium">
+                    {c?.header ?? k} ×
+                  </button>
+                );
+              })}
+            </div>
+          )}
+
+          {/* One dropdown, alphabetical, filtered as you type. The catalogue is
+              123 fields: laid out on the page it buries every other setting, and
+              sorting by anything but the alphabet means hunting. The menu stays
+              open while ticking — picking eight columns should be one visit. */}
+          <DropdownMenu>
+            <DropdownMenuTrigger asChild>
+              <Button variant="outline" size="sm" className="w-full justify-between h-8 text-xs font-normal">
+                {t('wpub.columnsPick')}
+                <ChevronsUpDown className="size-3.5 opacity-60" />
+              </Button>
+            </DropdownMenuTrigger>
+            {/* The search box is OUTSIDE the scrolling area, not sticky inside it.
+                Sticky kept it in place but the rows scrolled over it: a menu item
+                carries its own background and its own stacking, so it wins over a
+                sticky sibling however high its z-index. A header that never
+                scrolls has nothing to lose the fight with. */}
+            <DropdownMenuContent align="start" className="w-72 p-0 flex flex-col max-h-80">
+              <div className="p-1.5 border-b border-border/60 bg-popover shrink-0">
+                <Input className="h-7 text-xs" placeholder={t('wpub.columnsSearch')}
+                  value={colSearch}
+                  onChange={(e) => setColSearch(e.target.value)}
+                  onKeyDown={(e) => e.stopPropagation()} />
+              </div>
+              <div className="overflow-y-auto p-1">
+              {[...cols]
+                .sort((a, b) => a.header.localeCompare(b.header))
+                .filter((c) => {
+                  const q = colSearch.trim().toLowerCase();
+                  return !q || c.header.toLowerCase().includes(q) || c.key.toLowerCase().includes(q);
+                })
+                .map((c) => (
+                  <DropdownMenuCheckboxItem
+                    key={c.key}
+                    checked={cfg.columns?.includes(c.key) ?? false}
+                    onCheckedChange={() => toggleCol(c.key)}
+                    onSelect={(e) => e.preventDefault()}
+                    className="text-xs"
+                  >
+                    {c.header}
+                    <span className="ml-auto pl-2 text-[10px] text-muted-foreground font-mono">{c.group}</span>
+                  </DropdownMenuCheckboxItem>
+                ))}
+              </div>
+            </DropdownMenuContent>
+          </DropdownMenu>
+          <p className="text-[11px] text-muted-foreground">{t('wpub.columnsHint')}</p>
+        </div>
+
+        {/* ── Upload ── */}
+        <div className="space-y-2 border-t border-border/60 pt-3">
+          <label className="flex items-center gap-2 text-sm cursor-pointer">
+            <Checkbox checked={cfg.ftp_enabled} onCheckedChange={(c) => patch({ ftp_enabled: !!c })} />
+            {t('wpub.ftpEnable')}
+          </label>
+          {cfg.ftp_enabled && (
+            <div className="grid grid-cols-[130px_1fr] gap-2 items-center">
+              <Label className="text-sm">{t('wpub.ftpHost')}</Label>
+              <div className="flex gap-2">
+                <Input className="h-8 flex-1" placeholder="ftp.example.com" value={cfg.ftp_host}
+                  onChange={(e) => set({ ftp_host: e.target.value })} onBlur={() => patch({ ftp_host: cfg.ftp_host })} />
+                <Input type="number" className="h-8 w-24 font-mono text-xs" value={cfg.ftp_port}
+                  onChange={(e) => set({ ftp_port: Number(e.target.value) || 21 })}
+                  onBlur={() => patch({ ftp_port: cfg.ftp_port })} />
+              </div>
+              <Label className="text-sm">{t('wpub.ftpUser')}</Label>
+              <Input className="h-8" value={cfg.ftp_user}
+                onChange={(e) => set({ ftp_user: e.target.value })} onBlur={() => patch({ ftp_user: cfg.ftp_user })} />
+              <Label className="text-sm">{t('wpub.ftpPassword')}</Label>
+              <Input type="password" className="h-8" value={cfg.ftp_password}
+                onChange={(e) => set({ ftp_password: e.target.value })} onBlur={() => patch({ ftp_password: cfg.ftp_password })} />
+              <Label className="text-sm">{t('wpub.ftpFolder')}</Label>
+              <Input className="h-8 font-mono text-xs" placeholder="/www/log" value={cfg.ftp_folder}
+                onChange={(e) => set({ ftp_folder: e.target.value })} onBlur={() => patch({ ftp_folder: cfg.ftp_folder })} />
+              <Label className="text-sm">{t('wpub.ftpFileName')}</Label>
+              <Input className="h-8 w-56 font-mono text-xs" value={cfg.ftp_file_name}
+                onChange={(e) => set({ ftp_file_name: e.target.value })} onBlur={() => patch({ ftp_file_name: cfg.ftp_file_name })} />
+              <span />
+              <label className="flex items-center gap-2 text-sm cursor-pointer">
+                <Checkbox checked={cfg.ftp_tls} onCheckedChange={(c) => patch({ ftp_tls: !!c })} />
+                {t('wpub.ftpTls')}
+              </label>
+            </div>
+          )}
+        </div>
+
+        <div className="flex items-center gap-3 border-t border-border/60 pt-3 flex-wrap">
+          <Button size="sm" onClick={() => run('publish')} disabled={busy !== ''}>
+            {busy === 'publish' ? <Loader2 className="size-3.5 animate-spin" /> : <Upload className="size-3.5" />}
+            {t('wpub.publishNow')}
+          </Button>
+          {cfg.ftp_enabled && (
+            <Button variant="outline" size="sm" onClick={() => run('test')} disabled={busy !== ''}>
+              {busy === 'test' ? <Loader2 className="size-3.5 animate-spin" /> : null}
+              {t('wpub.testFtp')}
+            </Button>
+          )}
+        </div>
+      </>)}
+
+      {msg && <p className="text-xs text-success break-all">{msg}</p>}
+      {err && <p className="text-xs text-danger break-all">{err}</p>}
+    </div>
+  );
+}

frontend/src/components/WinkeyerPanel.tsx

@@ -26,7 +26,7 @@ interface Props {
   wpm: number;
   macros: WKMacro[];
   sent: string; // text echoed back by the keyer as it transmits
-  source: 'winkeyer' | 'icom' | 'flex' | 'yaesu'; // CW output engine (chosen in Settings → CW Keyer)
+  source: 'winkeyer' | 'icom' | 'flex' | 'yaesu' | 'kenwood'; // CW output engine (chosen in Settings → CW Keyer)
   breakIn?: number;                          // Icom CW break-in: 0=OFF, 1=SEMI, 2=FULL
   onSetBreakIn?: (mode: number) => void;
   onSelectPort: (p: string) => void;
@@ -101,16 +101,16 @@ export function WinkeyerPanel({
         <Radio className="size-4 text-primary shrink-0" />
         {/* CW output engine (chosen in Settings → CW Keyer). */}
         <span className="text-xs font-semibold uppercase tracking-wider text-muted-foreground shrink-0">
-          {source === 'icom' ? 'Icom CW' : source === 'flex' ? 'Flex CWX' : source === 'yaesu' ? 'Yaesu CW' : 'WinKeyer'}
+          {source === 'icom' ? 'Icom CW' : source === 'flex' ? 'Flex CWX' : source === 'yaesu' ? 'Yaesu CW' : source === 'kenwood' ? 'Kenwood CW' : 'WinKeyer'}
         </span>
         <span className={cn('size-2 rounded-full', connected ? (status.busy ? 'bg-warning animate-pulse' : 'bg-success') : 'bg-muted-foreground/40')}
           title={connected ? (status.busy ? t('wkp.sending') : t('wkp.connectedV', { version: status.version })) : t('wkp.disconnected')} />
         <div className="flex-1" />
-        {source === 'icom' || source === 'flex' || source === 'yaesu' ? (
+        {source === 'icom' || source === 'flex' || source === 'yaesu' || source === 'kenwood' ? (
           <span className="text-[11px] font-medium text-muted-foreground">
             {source === 'flex'
               ? (connected ? t('wkp.cwxReady') : t('wkp.cwxOffline'))
-              : source === 'yaesu'
+              : source === 'yaesu' || source === 'kenwood'
                 ? (connected ? t('wkp.rigReady') : t('wkp.rigOffline'))
                 : (connected ? t('wkp.civReady') : t('wkp.civOffline'))}
           </span>

frontend/src/components/WorkedBeforeGrid.tsx

@@ -35,6 +35,7 @@ type Props = {
   onUpdateFromCty?: (ids: number[]) => void;
   onUpdateFromQRZ?: (ids: number[]) => void;
   onUpdateFromClublog?: (ids: number[]) => void;
+  onUpdateCountyFromULS?: (ids: number[]) => void;
   onSendTo?: (service: string, ids: number[]) => void;
   onSendRecording?: (ids: number[]) => void;
   onSendEQSL?: (ids: number[]) => void;
@@ -57,7 +58,7 @@ function fmtDate(s: any): string {
   return `${d.getUTCFullYear()}-${p(d.getUTCMonth() + 1)}-${p(d.getUTCDate())}`;
 }
 
-export function WorkedBeforeGrid({ wb, myGrid, busy, currentCall, onRowDoubleClicked, onUpdateFromCty, onUpdateFromQRZ, onUpdateFromClublog, onSendTo, onSendRecording, onSendEQSL, onBulkEdit, onExportSelected, onExportSelectedFields, onExportCabrilloSelected, onDelete, awardCols }: Props) {
+export function WorkedBeforeGrid({ wb, myGrid, busy, currentCall, onRowDoubleClicked, onUpdateFromCty, onUpdateFromQRZ, onUpdateFromClublog, onUpdateCountyFromULS, onSendTo, onSendRecording, onSendEQSL, onBulkEdit, onExportSelected, onExportSelectedFields, onExportCabrilloSelected, onDelete, awardCols }: Props) {
   const { t } = useI18n();
   const gridRef = useRef<any>(null);
   const [pickerOpen, setPickerOpen] = useState(false);
@@ -272,6 +273,7 @@ export function WorkedBeforeGrid({ wb, myGrid, busy, currentCall, onRowDoubleCli
         onUpdateFromCty={(ids) => onUpdateFromCty?.(ids)}
         onUpdateFromQRZ={(ids) => onUpdateFromQRZ?.(ids)}
         onUpdateFromClublog={onUpdateFromClublog}
+        onUpdateCountyFromULS={onUpdateCountyFromULS}
         onSendTo={onSendTo}
         onSendRecording={onSendRecording}
         onSendEQSL={onSendEQSL}
@@ -296,6 +298,20 @@ export function WorkedBeforeGrid({ wb, myGrid, busy, currentCall, onRowDoubleCli
               {t('wbg.pickerDesc')}
             </DialogDescription>
           </DialogHeader>
+          {/* Whole-dialog controls — the award columns included, which the
+              catalogue-only helpers do not cover. */}
+          <div className="flex items-center gap-1 px-5 text-[11px] text-muted-foreground">
+            <span>{t('wbg.allGroups')}</span>
+            <button type="button" className="text-[11px] text-primary hover:underline px-1"
+              onClick={() => { showAll(); (awardCols ?? []).forEach((a) => setColVisible(`award_${a.code}`, true)); }}>
+              {t('wbg.all')}
+            </button>
+            <span className="opacity-40">·</span>
+            <button type="button" className="text-[11px] text-muted-foreground hover:underline px-1"
+              onClick={() => { hideAll(); (awardCols ?? []).forEach((a) => setColVisible(`award_${a.code}`, false)); }}>
+              {t('wbg.none')}
+            </button>
+          </div>
           <div className="grid grid-cols-2 gap-4 max-h-[60vh] overflow-y-auto px-5 py-3">
             {GROUP_ORDER.map((group) => {
               const cols = COL_CATALOG.filter((c) => c.group === group);

frontend/src/components/qsl/EditorPanel.tsx

@@ -10,6 +10,7 @@ import {
 } from '@/components/ui/select';
 import { Separator } from '@/components/ui/separator';
 import { cn } from '@/lib/utils';
+import { QSO_BOX_FIELDS, QSO_FIELD_LABELS } from './qslTypes';
 import type { CardTemplate, CardElement, QSOBox, QSLPresetInfo, StyleParams } from './qslTypes';
 import type { CardSelection } from './CardPreview';
 import { StylePresetPicker, NumberField } from './StylePresetPicker';
@@ -199,6 +200,26 @@ export function EditorPanel({ template, sel, presets, fontFamilies, onPatchEleme
               <Input className="h-7 w-44 font-mono text-xs" value={box.title ?? ''}
                 onChange={(ev) => onPatchBox({ title: ev.target.value })} />
             </div>
+            <div className="space-y-1">
+              <Label className="text-xs text-muted-foreground">Columns</Label>
+              {/* Rebuilt from the canonical order every time rather than
+                  appended to: a box whose columns come out in the order they
+                  were ticked reads as a bug, and the widths are tuned for this
+                  order. */}
+              <div className="grid grid-cols-2 gap-x-2">
+                {QSO_BOX_FIELDS.map((f) => (
+                  <label key={f} className="flex items-center gap-1.5 text-xs">
+                    <Checkbox
+                      checked={box.fields.includes(f)}
+                      onCheckedChange={(v) => onPatchBox({
+                        fields: QSO_BOX_FIELDS.filter((k) => (k === f ? v === true : box.fields.includes(k))),
+                      })}
+                    />
+                    {QSO_FIELD_LABELS[f] ?? f}
+                  </label>
+                ))}
+              </div>
+            </div>
             <div className="flex items-center justify-between gap-2">
               <Label className="text-xs text-muted-foreground">Footer</Label>
               <Input className="h-7 w-44 font-mono text-xs" value={box.footer}

frontend/src/components/qsl/QslDesignerModal.tsx

@@ -13,6 +13,7 @@ import { Checkbox } from '@/components/ui/checkbox';
 import { Label } from '@/components/ui/label';
 import {
   QSLPickPhotos, QSLGenerateProposals, QSLListTemplates, QSLGetTemplate,
+  QSLListOtherProfileTemplates, QSLCopyTemplateToActiveProfile,
   QSLSaveTemplate, QSLSetDefaultTemplate, QSLDeleteTemplate, QSLSavePreview,
   QSLPreviewDataURL, QSLResolvePreview, QSLStylePresets,
 } from '../../../wailsjs/go/main/App';
@@ -59,6 +60,7 @@ export function QslDesignerModal({ open, onClose }: Props) {
   const [busy, setBusy] = useState(false);
   const [error, setError] = useState('');
   const [saved, setSaved] = useState<QSLTemplateInfo[]>([]);
+  const [foreign, setForeign] = useState<any[]>([]);
   const [previews, setPreviews] = useState<Record<number, string>>({});
   const [presets, setPresets] = useState<QSLPresetInfo[]>([]);
   const [fontFamilies, setFontFamilies] = useState<string[]>([]);
@@ -88,6 +90,8 @@ export function QslDesignerModal({ open, onClose }: Props) {
         if (url) p[t.id] = url;
       }));
       setPreviews(p);
+      // The designs this profile cannot see, offered for copying.
+      try { setForeign(((await QSLListOtherProfileTemplates()) ?? []) as any[]); } catch { /* nothing to offer */ }
     } catch (e) {
       setError(String(e));
     }
@@ -274,7 +278,29 @@ export function QslDesignerModal({ open, onClose }: Props) {
             </section>
 
             <section className="space-y-2">
-              <h3 className="text-sm font-semibold">Saved templates</h3>
+              <div className="flex items-center gap-3">
+                <h3 className="text-sm font-semibold">Saved templates</h3>
+                {/* Designs owned by another profile. A second profile is usually
+                    the same operator with a different rig or locator — same
+                    callsign, same cards — and redrawing one because the antenna
+                    changed is work nobody should have to do. */}
+                {!!foreign.length && (
+                  <select
+                    value=""
+                    onChange={async (e) => {
+                      const id = parseInt(e.target.value, 10);
+                      if (!id) return;
+                      try { await QSLCopyTemplateToActiveProfile(id); await refreshSaved(); }
+                      catch (err) { setError(String(err)); }
+                    }}
+                    className="h-7 rounded-md border border-border bg-background px-2 text-xs">
+                    <option value="">Copy from another profile…</option>
+                    {foreign.map((f) => (
+                      <option key={f.id} value={f.id}>{f.profile_name} — {f.name}</option>
+                    ))}
+                  </select>
+                )}
+              </div>
               {!saved.length && <p className="text-xs text-muted-foreground">None yet.</p>}
               <div className="grid grid-cols-3 gap-3">
                 {saved.map((t) => (

frontend/src/components/qsl/qslTypes.ts

@@ -165,6 +165,12 @@ export interface QSLPresetInfo {
 }
 
 // Human labels for the QSO box fields the renderer knows.
+// QSO_BOX_FIELDS is the canonical COLUMN ORDER of the confirmation box, and
+// the whole list the designer offers. The renderer's column widths are tuned
+// for it, so a box is always rebuilt from this order rather than from the
+// order the operator happened to tick the boxes in.
+export const QSO_BOX_FIELDS = ['qso_date', 'time_on', 'band', 'freq', 'mode', 'submode', 'rst_sent'] as const;
+
 export const QSO_FIELD_LABELS: Record<string, string> = {
   qso_date: 'Date',
   time_on: 'UTC',

frontend/src/components/ui/combobox.tsx

@@ -1,4 +1,5 @@
 import { useEffect, useRef, useState } from 'react';
+import { ChevronDown } from 'lucide-react';
 import { Input } from './input';
 import { cn } from '@/lib/utils';
 
@@ -7,6 +8,7 @@ import { cn } from '@/lib/utils';
 // can't hold a typo'd value that isn't in the list.
 export function Combobox({
   value, onChange, options, placeholder, className, allowFreeText = false, commitOnType = false,
+  showToggle = false,
 }: {
   value: string;
   onChange: (v: string) => void;
@@ -18,9 +20,21 @@ export function Combobox({
   // fields read live by other actions — e.g. RST, so a CW macro sent without
   // leaving the field uses the value just typed.
   commitOnType?: boolean;
+  // Draw a chevron that opens the full list on click.
+  //
+  // Without it this control is indistinguishable from a plain text box: it opens
+  // only on a keystroke or ArrowDown, both of which have to be known about
+  // first. That is fine for a field whose list is a convenience (RST), and wrong
+  // for one whose list is the ANSWER — the COM ports actually present on this
+  // machine, which nobody can be expected to recall.
+  showToggle?: boolean;
 }) {
   const [open, setOpen] = useState(false);
   const [query, setQuery] = useState('');
+  // Opened by the chevron rather than by typing: the whole list is on offer, not
+  // the part matching what is already in the field — a box holding COM7 would
+  // otherwise "open" onto COM7 alone.
+  const [browse, setBrowse] = useState(false);
   const ref = useRef<HTMLDivElement>(null);
 
   useEffect(() => {
@@ -31,20 +45,22 @@ export function Combobox({
     return () => document.removeEventListener('mousedown', onDoc);
   }, []);
 
-  const filtered = open
+  const filtered = !open ? []
-    ? options.filter((o) => o.toLowerCase().includes(query.toLowerCase())).slice(0, 60)
+    : browse ? options.slice(0, 60)
-    : [];
+      : options.filter((o) => o.toLowerCase().includes(query.toLowerCase())).slice(0, 60);
 
   function commit(v: string) {
     onChange(v);
     setQuery(v);
     setOpen(false);
+    setBrowse(false);
   }
 
   function onBlur() {
     // Defer so a click on an option registers first.
     setTimeout(() => {
       setOpen(false);
+      setBrowse(false);
       const trimmed = query.trim();
       const exact = options.find((o) => o.toLowerCase() === trimmed.toLowerCase());
       // Only fire onChange when the value actually changed — committing an
@@ -68,6 +84,7 @@ export function Combobox({
           const v = e.target.value;
           setQuery(v);
           setOpen(true);
+          setBrowse(false); // typing filters again
           // Commit-on-type pushes the value live to the parent (so a CW macro sent
           // without leaving the field uses what was just typed). With free text that's
           // any input; a restricted field (allowFreeText=false) commits ONLY a value
@@ -76,14 +93,34 @@ export function Combobox({
           if (commitOnType && (allowFreeText || options.some((o) => o.toLowerCase() === v.trim().toLowerCase()))) onChange(v);
         }}
         onBlur={onBlur}
+        className={showToggle ? 'pr-7' : undefined}
         onKeyDown={(e) => {
-          if ((e.key === 'ArrowDown' || e.key === 'Alt') && !open) { setOpen(true); }
+          if ((e.key === 'ArrowDown' || e.key === 'Alt') && !open) { setOpen(true); setBrowse(true); }
           else if (e.key === 'Enter' && open && filtered.length > 0) { e.preventDefault(); commit(filtered[0]); }
           else if (e.key === 'Escape') { setQuery(value); setOpen(false); }
           // Tab: just let it move on; onBlur commits/closes. Options are
           // tabIndex=-1 so a single Tab leaves the field.
         }}
       />
+      {showToggle && (
+        <button
+          type="button"
+          tabIndex={-1}
+          aria-label="Show list"
+          className="absolute inset-y-0 right-0 flex w-7 items-center justify-center text-muted-foreground hover:text-foreground"
+          // mousedown, not click: the input's blur fires first otherwise and
+          // closes the list the same instant this opens it.
+          onMouseDown={(e) => {
+            e.preventDefault();
+            if (open) { setOpen(false); setBrowse(false); return; }
+            setQuery(value);
+            setBrowse(true);
+            setOpen(true);
+          }}
+        >
+          <ChevronDown className="size-3.5" />
+        </button>
+      )}
       {open && filtered.length > 0 && (
         <div className="absolute z-50 mt-1 max-h-60 w-full overflow-auto rounded-md border border-border bg-card shadow-lg text-xs">
           {filtered.map((o) => (

frontend/src/components/ui/tabs.tsx

@@ -37,7 +37,11 @@ const TabsContent = React.forwardRef<
 >(({ className, ...props }, ref) => (
   <TabsPrimitive.Content
     ref={ref}
-    className={cn('mt-2 ring-offset-background focus-visible:outline-none focus-visible:ring-2 focus-visible:ring-ring focus-visible:ring-offset-2', className)}
+    // No focus ring on the panel itself. Radix makes the content focusable and
+    // moves focus into it when a tab is selected, so clicking anywhere in the
+    // lower half drew a full-width orange rule under the tab strip. The panel is
+    // a container — what it holds carries its own focus styling.
+    className={cn('mt-2 focus-visible:outline-none', className)}
     {...props}
   />
 ));

frontend/src/lib/autocall.ts

@@ -0,0 +1,208 @@
+// Auto-call: let OpsLog answer a decode without the operator clicking it.
+//
+// WITHDRAWN FROM THE INTERFACE, because DXHunter already does it.
+//
+// Two programs from the same shack deciding on their own to answer the same
+// decode is worse than either doing it alone: they cannot see each other, so
+// they key over one another, and afterwards there is no telling which of them
+// called. The duplicate is the one to remove, and DXHunter is where this lives.
+//
+// There is no switch in Preferences and no button on the decodes toolbar, and
+// App.tsx returns before the loop can run. The file is kept whole: the rules
+// below are the delicate part, argued over and tested, and rewriting them from
+// memory later would be worse than leaving them here. Reinstating the feature
+// means restoring all three — the settings page, the button, and the guard.
+//
+// This KEYS THE TRANSMITTER on its own, which is why the rules here are written
+// as a series of refusals rather than a search for a reason to call. Everything
+// below has to be true; anything unknown means no.
+//
+// The decision is made here, in one pure function, precisely because it is the
+// dangerous part: it can be read, argued with and tested without a radio.
+
+export type AutoCallCriteria = {
+  dxcc: boolean;      // entity never worked
+  bandmode: boolean;  // entity worked, but neither this band nor this mode
+  band: boolean;      // entity never worked on this band
+  mode: boolean;      // entity never worked in this mode
+  slot: boolean;      // band and mode each worked, never together
+  grid: boolean;      // square wanted under the grid scope
+  county: boolean;    // US county never worked
+  pota: boolean;      // park never worked
+  // No SOTA here, though the shape invites it: a decode carries no summit
+  // reference and the backend publishes no "new summit" flag, so a criterion
+  // for it could never be true. It WAS declared, translated and impossible to
+  // tick — a field that lies about what the feature can do.
+  pfx: boolean;       // CQ WPX prefix never worked
+};
+
+export type AutoCallSettings = {
+  enabled: boolean;
+  criteria: AutoCallCriteria;
+  // Callsigns to answer on sight, wildcards allowed (4S7*, */P). Each is still
+  // subject to `watchCriteria` — "call TM0HQ, but only if it is a new band" is
+  // the request, not "call it every time it appears".
+  watch: string[];
+  // Empty means call a watched callsign whenever it is not already worked.
+  watchCriteria: AutoCallCriteria;
+  // Seconds to ignore a callsign after calling it, so a station that keeps
+  // sending CQ is not re-answered every slot while the QSO is in progress.
+  cooldownSec: number;
+};
+
+export const emptyCriteria: AutoCallCriteria = {
+  dxcc: false, bandmode: false, band: false, mode: false, slot: false,
+  grid: false, county: false, pota: false, pfx: false,
+};
+
+export const defaultAutoCall: AutoCallSettings = {
+  // OFF, and it stays off until asked for. Unattended transmit is not something
+  // to inherit from an upgrade.
+  enabled: false,
+  criteria: { ...emptyCriteria },
+  watch: [],
+  watchCriteria: { ...emptyCriteria },
+  cooldownSec: 120,
+};
+
+const AC_KEY = 'opslog.autoCall';
+
+export function loadAutoCall(): AutoCallSettings {
+  try {
+    const raw = localStorage.getItem(AC_KEY);
+    if (!raw) return { ...defaultAutoCall };
+    const v = JSON.parse(raw);
+    return {
+      ...defaultAutoCall,
+      ...v,
+      criteria: { ...emptyCriteria, ...(v?.criteria ?? {}) },
+      watchCriteria: { ...emptyCriteria, ...(v?.watchCriteria ?? {}) },
+      watch: Array.isArray(v?.watch) ? v.watch : [],
+    };
+  } catch { return { ...defaultAutoCall }; }
+}
+
+export const autoCallKey = AC_KEY;
+
+// A decode's resolved novelty, the same shape the panel already renders from.
+export type DecodeStatus = {
+  status?: string;
+  worked_call?: boolean;
+  new_grid?: boolean;
+  grid_state?: string;
+  new_county?: boolean;
+  new_pota?: boolean;
+  new_pfx?: boolean;
+};
+
+// matchesWildcard is the same rule the alert filters use: * is any run, ? is one.
+export function matchesWildcard(pattern: string, call: string): boolean {
+  const p = pattern.trim().toUpperCase();
+  const c = call.trim().toUpperCase();
+  if (!p) return false;
+  const re = new RegExp('^' + p.split('').map((ch) => (
+    ch === '*' ? '.*' : ch === '?' ? '.' : ch.replace(/[.*+?^${}()|[\]\\]/g, '\\$&')
+  )).join('') + '$');
+  return re.test(c);
+}
+
+// anyCriterion is false for an all-off set, which is what makes "watch this
+// callsign, no conditions" expressible.
+function anyCriterion(c: AutoCallCriteria): boolean {
+  return Object.values(c).some(Boolean);
+}
+
+// meets reports whether a decode satisfies at least one ticked criterion.
+function meets(c: AutoCallCriteria, e: DecodeStatus): boolean {
+  if (c.dxcc && e.status === 'new') return true;
+  // Each status is exclusive, so a station that is new on both counts matches
+  // ONLY this criterion — ticking "new band" alone would not catch it, which is
+  // the wrong way round: it is the better catch of the two.
+  if (c.bandmode && e.status === 'new-band-mode') return true;
+  if (c.band && e.status === 'new-band') return true;
+  if (c.mode && e.status === 'new-mode') return true;
+  if (c.slot && e.status === 'new-slot') return true;
+  // A square that is merely UNCONFIRMED is not called: the QSO is already made,
+  // and calling again would work a duplicate to chase a QSL.
+  if (c.grid && e.new_grid && e.grid_state !== 'unconf') return true;
+  if (c.county && e.new_county) return true;
+  if (c.pota && e.new_pota) return true;
+  if (c.pfx && e.new_pfx) return true;
+  return false;
+}
+
+export type AutoCallDecode = {
+  call: string;
+  cq?: boolean;
+  msg?: string;
+  instance?: string;
+};
+
+// shouldAutoCall decides whether to answer one decode. The reason is returned
+// for the log: an automatic transmission with no record of WHY is the thing an
+// operator cannot argue with after the fact.
+export function shouldAutoCall(
+  s: AutoCallSettings,
+  d: AutoCallDecode,
+  e: DecodeStatus | undefined,
+  opts: {
+    // busy is "some receiver is mid-QSO", NOT "this one is transmitting".
+    //
+    // The distinction is the whole bug it fixes: with two instances the caller
+    // used to test a single global transmit flag, which belonged to whichever
+    // receiver reported last. So while slice A worked a station, slice B looked
+    // idle and auto-call started another QSO on it — and the moment either
+    // finished it chained straight into the next. One station at a time means
+    // one across ALL receivers, not one per receiver.
+    busy: boolean;
+    calledAt: Map<string, number>;
+    now: number;
+    myCall?: string;
+  },
+): { call: boolean; reason: string } {
+  const no = (why: string) => ({ call: false, reason: why });
+  if (!s.enabled) return no('off');
+  if (!e) return no('status not resolved yet');
+  const call = (d.call ?? '').trim().toUpperCase();
+  if (!call) return no('no callsign');
+  // Never answer ourselves, however the decode reached us.
+  if (opts.myCall && call === opts.myCall.trim().toUpperCase()) return no('own callsign');
+  // NOT limited to a CQ, deliberately.
+  //
+  // It used to be, on the reasoning that answering a station mid-QSO is calling
+  // over somebody. That reasoning ignored the case the feature exists for: a
+  // DXpedition running a pileup never sends CQ at all — it works caller after
+  // caller — so the rule sat out the one contact auto-call was turned on for. A
+  // new entity on 15 m FT8, decode after decode, and not a single transmission.
+  //
+  // WHEN to transmit is not ours to decide either: the Reply goes to the
+  // decoder, and MSHV starts at once while JTDX waits for a CQ. Two correct
+  // behaviours, both belonging to the program that owns the timing. Here the
+  // question is only whether the station is one the operator wants — the
+  // criteria below answer that, and the cooldown and the busy check keep it from
+  // calling twice.
+  // Not while ANY receiver is mid-QSO — transmitting, or holding a DX call it
+  // has not finished with. Starting a second exchange before the first is done
+  // is what turned this into a machine that called without stopping.
+  if (opts.busy) return no('a QSO is already in progress');
+  const last = opts.calledAt.get(call);
+  if (last !== undefined && opts.now - last < s.cooldownSec * 1000) return no('called recently');
+
+  // The watch list first: an explicitly named station outranks the general
+  // criteria, and may carry conditions of its own.
+  const watched = s.watch.some((p) => matchesWildcard(p, call));
+  if (watched) {
+    if (!anyCriterion(s.watchCriteria)) {
+      // No conditions attached: call it unless it is already worked.
+      return e.worked_call ? no('watched, but already worked') : { call: true, reason: 'watch list' };
+    }
+    return meets(s.watchCriteria, e)
+      ? { call: true, reason: 'watch list + criteria' }
+      : no('watched, but no criterion met');
+  }
+
+  if (!anyCriterion(s.criteria)) return no('no criteria ticked');
+  return meets(s.criteria, e)
+    ? { call: true, reason: 'criteria' }
+    : no('no criterion met');
+}

frontend/src/lib/awardRefs.ts

@@ -154,3 +154,83 @@ export function buildAwardRefs(qso: any, pickable: Array<{ code: string; field:
   }
   return out.join(';');
 }
+
+// COMPUTED_AWARD_FIELDS mirrors isComputedAwardField in app.go: awards whose
+// reference is derived from the callsign and cty.dat, never assigned by hand.
+//
+// State and county are deliberately absent, there as here — an operator sets
+// those themselves and they drive real predefined-list awards (WAS, WAJA, JCC).
+const COMPUTED_AWARD_FIELDS = new Set([
+  'dxcc', 'cqz', 'ituz', 'prefix', 'callsign', 'cont', 'country', 'grid', 'grid4',
+]);
+
+// spotRefList turns a QSO's code→ref map into the strings a DX-cluster comment
+// wants: ["SOTA HA/KM-018"].
+//
+// COMPUTED awards are dropped. A QSO's materialised references hold both kinds,
+// and the derived ones — DXCC, WAC, WAZ, WPX — are exactly what every reader of
+// the spot works out from the callsign anyway. Announcing "WAC EU WAZ 15 WPX HA5"
+// spends the whole 30-character comment saying nothing, and buries the one
+// reference worth chasing. Same rule as the QSO editor, which is why these are
+// the references it lists on the LEFT and not in its read-only panel.
+//
+// fieldOf is award code → scanned field (from GetAwardDefs). A code missing from
+// it is dropped rather than guessed: showing a reference on the air matters more
+// than showing all of them.
+//
+// A code carrying several references (a two-fer park) yields one entry each, so
+// a spot can take the one that fits instead of emitting a truncated pair.
+// Shortest first: when they cannot all fit, more references beat fewer.
+export function spotRefList(byCode: Record<string, string>, fieldOf: Record<string, string>): string[] {
+  const out: string[] = [];
+  for (const [code, refs] of Object.entries(byCode ?? {})) {
+    const field = fieldOf?.[code.toUpperCase()];
+    if (!field || COMPUTED_AWARD_FIELDS.has(field)) continue;
+    for (const ref of String(refs).split(',').map((s) => s.trim()).filter(Boolean)) {
+      out.push(`${code.toUpperCase()} ${ref.toUpperCase()}`);
+    }
+  }
+  return out.sort((a, b) => a.length - b.length || a.localeCompare(b));
+}
+
+// withIOTARef adds an island reference from the callbook to an entry's award
+// references, unless the operator has already set one.
+//
+// QRZ sends <iota> for an operator on an island and OpsLog used to read past it.
+// It matters more here than it would for another award: unlike POTA there is no
+// live "who is on an island right now" feed anywhere, so the callbook record is
+// the practical source — and it is known before the contact is logged, which is
+// when it is useful.
+//
+// A reference the operator typed or picked wins. A callbook entry can be years
+// old, and the operator in front of the radio has just been told where the
+// station is.
+// withRDARef adds a Russian district from the callbook to an entry's award
+// references, on the same terms as the island above.
+//
+// HamQTH publishes the district a station operates from TODAY. That is the
+// right answer for the contact being typed and the wrong one for any other, so
+// this is only ever called on the entry — never on a QSO already in the log.
+// A station can move district; stamping today's on last year's contact turns a
+// correct entry into a false one, and nothing downstream could tell.
+export function withRDARef(awardRefs: string, rda: string): string {
+  const ref = (rda || '').trim().toUpperCase();
+  // Two letters, a hyphen, two digits. Anything else is not a district.
+  if (!/^[A-Z]{2}-\d{2}$/.test(ref)) return awardRefs;
+  const byCode = parseAwardRefs(awardRefs);
+  if ((byCode['RDA'] ?? '').trim() !== '') return awardRefs; // already set: leave it
+  const sep = awardRefs.trim() === '' ? '' : ';';
+  return awardRefs + sep + 'RDA@' + ref;
+}
+
+export function withIOTARef(awardRefs: string, iota: string): string {
+  const ref = (iota || '').trim().toUpperCase();
+  // EU-048: two letters, a hyphen, three digits. Anything else is not an IOTA
+  // reference, and writing it into the award would make a reference that no
+  // list contains — which counts for nothing and has to be found by hand later.
+  if (!/^[A-Z]{2}-\d{3}$/.test(ref)) return awardRefs;
+  const byCode = parseAwardRefs(awardRefs);
+  if ((byCode['IOTA'] ?? '').trim() !== '') return awardRefs; // already set: leave it
+  const sep = awardRefs.trim() === '' ? '' : ';';
+  return awardRefs + sep + 'IOTA@' + ref;
+}

frontend/src/lib/clusterMacros.ts

@@ -0,0 +1,57 @@
+// Cluster command macros — a named button for a command you would otherwise
+// retype.
+//
+// Twelve slots, fixed. A list you can grow needs add/remove/reorder controls and
+// a decision about what an empty row means; twelve boxes you fill in need
+// neither, and nobody has thirteen cluster commands they use daily. A slot with
+// no command is simply not drawn, so the toolbar is as long as the operator made
+// it and no longer.
+//
+// Stored through writeUiPref like every other portable preference, so the
+// buttons travel with data/ rather than living in one browser profile.
+
+import { writeUiPref } from '@/lib/uiPref';
+
+export type ClusterMacro = {
+  label: string; // what the button says
+  cmd: string;   // what is sent to the master server
+};
+
+export const CLUSTER_MACRO_COUNT = 12;
+export const clusterMacrosKey = 'opslog.clusterMacros';
+
+export const emptyClusterMacros = (): ClusterMacro[] =>
+  Array.from({ length: CLUSTER_MACRO_COUNT }, () => ({ label: '', cmd: '' }));
+
+// loadClusterMacros always returns exactly CLUSTER_MACRO_COUNT entries, whatever
+// was stored: a saved list from a build with fewer slots must not leave the
+// editor rendering undefined rows.
+export function loadClusterMacros(): ClusterMacro[] {
+  const out = emptyClusterMacros();
+  try {
+    const raw = localStorage.getItem(clusterMacrosKey);
+    if (!raw) return out;
+    const v = JSON.parse(raw);
+    if (!Array.isArray(v)) return out;
+    for (let i = 0; i < CLUSTER_MACRO_COUNT && i < v.length; i++) {
+      out[i] = {
+        label: String(v[i]?.label ?? '').slice(0, 24),
+        cmd: String(v[i]?.cmd ?? '').slice(0, 120),
+      };
+    }
+  } catch { /* a corrupt preference is not worth failing the panel over */ }
+  return out;
+}
+
+export function saveClusterMacros(macros: ClusterMacro[]): void {
+  writeUiPref(clusterMacrosKey, JSON.stringify(macros));
+}
+
+// visibleClusterMacros drops the slots that would send nothing. The COMMAND is
+// what decides: a slot with a label and no command is a button that lies, and a
+// command with no label still has something to show — its own text.
+export function visibleClusterMacros(macros: ClusterMacro[]): ClusterMacro[] {
+  return macros
+    .filter((m) => m.cmd.trim() !== '')
+    .map((m) => ({ label: m.label.trim() || m.cmd.trim(), cmd: m.cmd.trim() }));
+}

frontend/src/lib/matrixColors.ts

@@ -0,0 +1,66 @@
+// Operator overrides for the band/mode matrix palette.
+//
+// Applied as inline custom properties on <html>, which is what lets them be
+// OVERRIDES rather than a palette: the twelve themes each define their own
+// --mx-* ramp in style.css, an inline value wins over all of them, and removing
+// it hands the colour straight back to the theme. Nothing has to know which
+// theme is active, and switching theme with overrides off is a clean revert.
+
+export type MatrixColors = {
+  enabled: boolean;
+  call_confirmed: string;
+  call_worked: string;
+  entity_confirmed: string;
+  entity_worked: string;
+  not_worked: string;
+  current_entry: string;
+};
+
+// The six settings fields and the CSS custom property each one drives. Also the
+// display order — the same order the legend under the matrix reads in, so the
+// settings panel and the grid can never disagree about which green is which.
+export const MATRIX_VARS: { key: keyof Omit<MatrixColors, 'enabled'>; cssVar: string; label: string }[] = [
+  { key: 'call_confirmed',   cssVar: '--mx-call-conf', label: 'mx.callConf' },
+  { key: 'call_worked',      cssVar: '--mx-call-work', label: 'mx.callWork' },
+  { key: 'entity_confirmed', cssVar: '--mx-dx-conf',   label: 'mx.dxConf' },
+  { key: 'entity_worked',    cssVar: '--mx-dx-work',   label: 'mx.dxWork' },
+  { key: 'not_worked',       cssVar: '--mx-none',      label: 'mx.none' },
+  { key: 'current_entry',    cssVar: '--mx-cur',       label: 'mx.current' },
+];
+
+export const emptyMatrixColors = (): MatrixColors => ({
+  enabled: false,
+  call_confirmed: '', call_worked: '', entity_confirmed: '',
+  entity_worked: '', not_worked: '', current_entry: '',
+});
+
+// applyMatrixColors stamps (or clears) the overrides on <html>. Safe to call as
+// often as you like — it is the whole rendering path, so the settings panel uses
+// it for a live preview and the app uses it once at startup.
+export function applyMatrixColors(c?: MatrixColors | null): void {
+  const root = document.documentElement;
+  for (const { key, cssVar } of MATRIX_VARS) {
+    const v = c?.enabled ? String(c[key] ?? '').trim() : '';
+    if (v) root.style.setProperty(cssVar, v);
+    else root.style.removeProperty(cssVar);
+  }
+}
+
+// effectiveMatrixColor reads what the matrix is ACTUALLY painting right now —
+// the override if there is one, else the active theme's value. It is what seeds
+// the colour pickers, so the operator starts from the colours in front of them
+// instead of from a hardcoded palette that may belong to a different theme.
+//
+// A custom property's computed value has its var() references substituted, so
+// --mx-cur resolves to the theme's --warning rather than to the literal text.
+export function effectiveMatrixColor(cssVar: string): string {
+  try {
+    const v = getComputedStyle(document.documentElement).getPropertyValue(cssVar).trim();
+    // <input type="color"> only accepts #rrggbb. Anything else (a theme that
+    // ever moves to oklch, an empty read during boot) falls back to mid grey
+    // rather than silently resetting the picker to black.
+    return /^#[0-9a-f]{6}$/i.test(v) ? v.toLowerCase() : '#808080';
+  } catch {
+    return '#808080';
+  }
+}

frontend/src/lib/qsl.ts

@@ -0,0 +1,17 @@
+// One answer to "is this QSL received".
+//
+// ADIF's QSL_Rcvd enumeration has BOTH Y and V: Y is "received", V is
+// "verified" — and V is what a LoTW download writes for a confirmation the ARRL
+// has validated. Testing for 'Y' alone therefore misses exactly the
+// confirmations an operator cares most about.
+//
+// It showed on screen: the Awards panel had Morocco validated on five bands
+// while the band/mode matrix beside it showed the entity as merely worked. The
+// award engine accepted Y or V; every other test in the app accepted Y.
+//
+// The Go side has the same rule twice over — award.isYes and qso.ConfirmedValues
+// — and all three have to agree. If you add a value here, add it there.
+export function isQSLConfirmed(v: unknown): boolean {
+  const s = String(v ?? '').trim().toUpperCase();
+  return s === 'Y' || s === 'V';
+}

frontend/src/lib/rotorHeading.ts

@@ -0,0 +1,102 @@
+import { GetRotatorHeading } from '../../wailsjs/go/main/App';
+
+// One poll loop for the antenna heading, shared by everything that shows it.
+//
+// TWO PROBLEMS THIS FIXES, both of them invisible until you count.
+//
+// The status bar polled, and the Station Control compass polled, and they polled
+// the SAME binding — so with that tab open the rotator was asked twice as often
+// as either component believed. Every backend builds a fresh client per call
+// (spid.New, gs232.NewSerial, dcu1.NewSerial, rotgenius.New…), so one poll is
+// one OPEN and CLOSE of a serial port or a TCP connection, not a read on a link
+// already up.
+//
+// And a fixed interval has no good value. Three seconds moved the needle in
+// steps of about thirteen degrees on a turning antenna — a compass that jumps
+// rather than sweeps. Seven hundred milliseconds sweeps beautifully and opens
+// the controller's port about ten thousand times an hour to watch an antenna
+// that has not moved since breakfast.
+//
+// So: fast while it is turning, slow while it is not. "Turning" is not something
+// these controllers report — a SPID answers a position and nothing else — so it
+// is inferred from the position changing, and held for a few seconds after the
+// last change so the tail of a movement stays smooth.
+
+export type RotorHeading = {
+  enabled: boolean; ok: boolean; azimuth: number;
+  rotors?: string[]; active?: number; motorized?: boolean; raw?: string;
+};
+
+const MOVING_MS = 500;   // while the antenna is turning
+const IDLE_MS = 3000;    // while it is parked — the rate everything used before
+const SETTLE_MS = 6000;  // stay fast this long after the last movement
+
+const subs = new Set<(h: RotorHeading) => void>();
+let timer: number | undefined;
+let inFlight = false;
+let lastAz: number | null = null;
+let lastMoveAt = 0;
+// The last heading anyone received, replayed to whoever subscribes next.
+//
+// Without it, opening Station Control left the compass blank for one or two
+// seconds while every other panel filled at once. Nothing was slow: the status
+// bar already had the loop running with a tick pending, so a component mounting
+// halfway through an idle interval simply waited out the rest of it. The
+// heading was known the whole time — it just had nowhere to be read from.
+let last: RotorHeading | null = null;
+
+function schedule(delay: number) {
+  if (timer !== undefined) window.clearTimeout(timer);
+  timer = window.setTimeout(tick, delay);
+}
+
+async function tick() {
+  // A slow controller must not stack requests behind itself: at 600 baud a SPID
+  // reply takes a fifth of a second on the wire alone, and a port that is still
+  // open from the last poll cannot be opened again.
+  if (inFlight) { schedule(MOVING_MS); return; }
+  inFlight = true;
+  try {
+    const h = (await GetRotatorHeading()) as unknown as RotorHeading;
+    if (h?.ok && typeof h.azimuth === 'number') {
+      if (lastAz !== null && h.azimuth !== lastAz) lastMoveAt = Date.now();
+      lastAz = h.azimuth;
+    }
+    last = h;
+    subs.forEach((fn) => { try { fn(h); } catch { /* a subscriber must not stop the loop */ } });
+  } catch {
+    // Leave the last heading alone: a single failed poll on a shared serial port
+    // is not news, and blanking the compass on one would make it flicker.
+  } finally {
+    inFlight = false;
+  }
+  if (subs.size > 0) schedule(Date.now() - lastMoveAt < SETTLE_MS ? MOVING_MS : IDLE_MS);
+  else timer = undefined;
+}
+
+// subscribeRotorHeading starts the loop if it is not running and returns the
+// unsubscribe. The loop stops when the last subscriber leaves.
+export function subscribeRotorHeading(fn: (h: RotorHeading) => void): () => void {
+  subs.add(fn);
+  // Hand over what is already known, at once. An Alpha SPID poll is an open,
+  // a read at 600 baud and a close, so even an immediate one takes a moment —
+  // the cached heading is what makes the compass appear with the panel rather
+  // than after it. In a microtask, so a subscriber is never called back before
+  // subscribeRotorHeading has returned to it.
+  if (last) { const h = last; queueMicrotask(() => { if (subs.has(fn)) fn(h); }); }
+  if (timer === undefined && !inFlight) void tick();
+  return () => {
+    subs.delete(fn);
+    if (subs.size === 0 && timer !== undefined) { window.clearTimeout(timer); timer = undefined; }
+  };
+}
+
+// pokeRotorHeading polls at once and switches to the fast rate — call it after
+// commanding a move, so the needle starts sweeping on the click rather than on
+// whatever was left of a three-second tick.
+export function pokeRotorHeading(): void {
+  lastMoveAt = Date.now();
+  if (timer !== undefined) window.clearTimeout(timer);
+  timer = undefined;
+  void tick();
+}

frontend/src/lib/rowColors.ts

@@ -0,0 +1,125 @@
+import { isQSLConfirmed } from '@/lib/qsl';
+// Row colouring for the log grid, by QSL status.
+//
+// Four categories, each scoped to the channels the operator cares about —
+// paper QSL, LoTW, eQSL, QRZ.com. The rules are ORDERED and the first match
+// wins, because a contact is usually several of them at once.
+
+export type RowColorRule = {
+  id: string;
+  color: string;
+  enabled: boolean;
+  channels?: string[]; // empty = every channel
+};
+export type RowColorSettings = {
+  enabled: boolean;
+  style?: 'bar' | 'tint' | 'both';
+  intensity?: number;
+  bandmap_lotw?: boolean;
+  recent_zebra?: string;        // '' = alternate (default), 'off' = every row alike
+  recent_zebra_color?: string;  // '' = follow the theme
+  rules: RowColorRule[];
+};
+
+// The banding the grid theme applies on its own. Repeated here because turning
+// the option OFF means painting every row explicitly — the theme would
+// otherwise keep striping underneath whatever we do per row.
+const ZEBRA_DEFAULT = 'color-mix(in srgb, var(--muted) 40%, var(--card))';
+
+export const CHANNELS = ['qsl', 'lotw', 'eqsl', 'qrz'] as const;
+
+// The two QSO fields behind each channel. QRZ.com and Club Log call theirs an
+// "upload status" rather than a QSL flag, but they carry the same Y / R letters.
+const FIELDS: Record<string, { sent: string; rcvd: string }> = {
+  qsl: { sent: 'qsl_sent', rcvd: 'qsl_rcvd' },
+  lotw: { sent: 'lotw_sent', rcvd: 'lotw_rcvd' },
+  eqsl: { sent: 'eqsl_sent', rcvd: 'eqsl_rcvd' },
+  qrz: { sent: 'qrzcom_qso_upload_status', rcvd: 'qrzcom_qso_download_status' },
+};
+
+// ADIF QSL fields are single letters. Y is the only one that means "yes";
+// R (requested) and Q (queued) mean it has not gone out yet — a different state,
+// and the one an operator looks for when deciding what to send.
+// Y or V — see lib/qsl. A LoTW-verified contact is confirmed, and colouring it
+// as unconfirmed is the same bug the band/mode matrix had.
+const yes = (v: any) => isQSLConfirmed(v);
+const owed = (v: any) => {
+  const s = String(v ?? '').trim().toUpperCase();
+  return s === 'R' || s === 'Q';
+};
+
+const chansOf = (r: RowColorRule): readonly string[] =>
+  r.channels && r.channels.length ? r.channels : CHANNELS;
+
+function ruleMatches(q: any, r: RowColorRule): boolean {
+  const cs = chansOf(r);
+  switch (r.id) {
+    case 'confirmed':
+      return cs.some((c) => yes(q[FIELDS[c]?.rcvd]));
+    case 'sent':
+      return cs.some((c) => yes(q[FIELDS[c]?.sent]));
+    case 'to_send':
+      return cs.some((c) => owed(q[FIELDS[c]?.sent]));
+    case 'worked':
+      // The catch-all: nothing sent, nothing asked for, nothing back.
+      return !CHANNELS.some((c) => yes(q[FIELDS[c].rcvd]) || yes(q[FIELDS[c].sent]) || owed(q[FIELDS[c].sent]));
+    default:
+      return false;
+  }
+}
+
+// Walks the rules IN ORDER — the order is the priority, and the settings panel
+// shows it numbered so it can be read rather than guessed.
+export function matchRowRule(q: any, cfg: RowColorSettings | null): RowColorRule | null {
+  if (!q || !cfg?.rules) return null;
+  for (const r of cfg.rules) {
+    if (r.enabled && ruleMatches(q, r)) return r;
+  }
+  return null;
+}
+
+// The colour is never a fill by default.
+//
+// A log where nearly every contact has SOME QSL state ends up with every row
+// painted, and colour that is always present stops being information. The
+// default is a stripe down the left edge; a tint is offered at a chosen strength.
+// rowIndex is optional: only the Recent QSOs grid bands its rows, and the other
+// callers have nothing to say about odd and even.
+export function rowStyleFor(q: any, cfg: RowColorSettings | null, rowIndex?: number): Record<string, string> | undefined {
+  const out: Record<string, string> = {};
+  // Banding first, and INDEPENDENT of cfg.enabled: it is legibility, not QSL
+  // status, and an operator who wants plain rows should not have to turn the
+  // status colours off to get them.
+  if (typeof rowIndex === 'number') {
+    if (cfg?.recent_zebra === 'off') {
+      out.backgroundColor = 'var(--card)';
+    } else if (rowIndex % 2 === 1) {
+      out.backgroundColor = cfg?.recent_zebra_color || ZEBRA_DEFAULT;
+    }
+  }
+  const empty = () => (Object.keys(out).length ? out : undefined);
+  if (!cfg?.enabled) return empty();
+  const rule = matchRowRule(q, cfg);
+  if (!rule?.color) return empty();
+
+  const style = cfg.style ?? 'bar';
+  const pct = Math.max(5, Math.min(45, cfg.intensity ?? 12));
+  if (style === 'tint' || style === 'both') {
+    // Overrides the banding on purpose: the QSL colour is information, the
+    // banding is only there to help the eye keep its line.
+    out.backgroundColor = `color-mix(in srgb, ${rule.color} ${pct}%, transparent)`;
+  }
+  if (style === 'bar' || style === 'both') {
+    // A background gradient, not a border and not a shadow.
+    //
+    // A border would shift the cells three pixels on coloured rows only, and
+    // the columns would stop lining up. An inset box-shadow was the first fix
+    // for that and drew the stripe correctly — but on the grid's transformed,
+    // absolutely-positioned rows it also bled a hairline of the same colour
+    // along the row edges, so every coloured row got a horizontal rule it was
+    // never meant to have. A gradient paints inside the box and nothing else:
+    // three pixels of colour, then transparent, and no edge to bleed from.
+    out.backgroundImage = `linear-gradient(to right, ${rule.color} 0, ${rule.color} 3px, transparent 3px)`;
+  }
+  return out;
+}

frontend/src/lib/spotDisplay.ts

@@ -0,0 +1,89 @@
+// Two operator options that change how a spot LOOKS, shared by the DX-cluster
+// list and the band map so the two panels can never disagree about the same
+// spot — the lesson already learnt with the marker colours.
+//
+//   muteWorked    — a station already worked gets no colour and no badge. It
+//                   stays in the list, it simply stops competing for attention.
+//   slotHighlight — a callsign not yet worked on THIS band and mode is coloured,
+//                   whatever the entity says. For an operator filling slots, a
+//                   common entity on a new band+mode is the whole point, and the
+//                   entity-level status calls it "worked".
+//
+// They compose deliberately: mute what is done, light up what is not.
+
+export type SpotDisplayOptions = { muteWorked: boolean; slotHighlight: boolean };
+
+// Both options are withdrawn from the filter panel for now. The machinery below
+// is deliberately kept whole — it is correct and hard-won — so putting the two
+// switches back is this one flag and the block they came from in App.tsx.
+//
+// The saved preferences are left untouched in localStorage rather than cleared:
+// an operator who had either turned on gets them back exactly as they were the
+// day the options return, instead of silently starting from off.
+export const SPOT_DISPLAY_OPTIONS_EXPOSED = false;
+
+export function readSpotDisplayOptions(): SpotDisplayOptions {
+  if (!SPOT_DISPLAY_OPTIONS_EXPOSED) return { muteWorked: false, slotHighlight: false };
+  try {
+    return {
+      muteWorked: localStorage.getItem('opslog.clusterMuteWorked') === '1',
+      slotHighlight: localStorage.getItem('opslog.clusterSlotHighlight') === '1',
+    };
+  } catch {
+    return { muteWorked: false, slotHighlight: false };
+  }
+}
+
+type Entry = {
+  status?: string;
+  worked_call?: boolean;
+  worked_slot?: boolean;
+  new_county?: boolean;
+  new_pota?: boolean;
+  new_pfx?: boolean;
+  new_grid?: boolean;
+} | undefined;
+
+// applySpotDisplay rewrites a status entry per the options, so every consumer —
+// colour, badge, status text — follows from one decision instead of each panel
+// re-deriving it.
+export function applySpotDisplay<T extends Entry>(s: T, o: SpotDisplayOptions): T {
+  if (!s) return s;
+  let e = s;
+
+  // Slot promotion runs first: a callsign not yet worked on this band and mode
+  // is not done, whatever the entity says, so it earns a status before the mute
+  // below can take its colour away.
+  if (o.slotHighlight && e.worked_slot === false && (!e.status || e.status === 'worked')) {
+    e = { ...e, status: 'new-call' } as NonNullable<T>;
+  }
+
+  // Mute drops the blue already-worked-callsign mark, and NOTHING else.
+  //
+  // It used to blank the status as well, on the theory that a spot bringing no
+  // novelty should stop painting entirely. That was wrong twice over. The status
+  // is what the cluster list reads to DIM a row, so blanking it turned every
+  // quiet grey row bright white — the option made the list louder, not quieter.
+  // And an empty status means "entity not resolved" everywhere else, so muted
+  // spots had to carry a flag saying they did not really mean that.
+  //
+  // Leaving the status alone costs nothing: a worked entity already renders with
+  // no colour and gets dimmed, so removing the blue is the entire job.
+  if (o.muteWorked) {
+    e = { ...e, worked_call: false } as NonNullable<T>;
+  }
+  return e;
+}
+
+// spotIsWorked answers "does this spot bring me nothing?", which is what the
+// "hide worked" filter is really asking.
+//
+// The extra markers are ORTHOGONAL to the entity status — a spot can be a worked
+// entity AND a new park, prefix, county or grid — so they win. Without that, a
+// new prefix in an entity worked years ago vanished the moment the filter went
+// on, which is the opposite of what an operator hunting prefixes wants.
+export function spotIsWorked(e: Entry): boolean {
+  if (!e) return false;
+  if (e.new_pota || e.new_county || e.new_pfx || e.new_grid) return false;
+  return !!e.worked_call || e.status === 'worked';
+}

frontend/src/lib/spotMarkers.ts

@@ -0,0 +1,45 @@
+// The "extra" spot markers — the ones ORTHOGONAL to the entity status.
+//
+// A spot's entity status (new DXCC / new band / new slot / worked) answers one
+// question. These answer others that can be true at the same time: the park is
+// new even if the entity is worked, the county is new even if the band is not.
+// Both the DX-cluster list and the band map show them, and they have to agree —
+// the same fact must not be green in one panel and violet in the next, so the
+// colours live HERE and nowhere else. This is also the table a per-marker colour
+// setting will drive, which is why it is a table rather than three constants.
+//
+// Colour choices:
+//   POTA    green   — parks; the association is worth keeping
+//   county  violet  — a chart hue, because every semantic token was already
+//                     spoken for: red, orange and yellow are the entity
+//                     statuses, blue is "callsign worked", green is POTA
+//   worked  blue    — matches the WKD-CALL badge the cluster list has always used
+//   prefix  yellow  — unchanged
+//   grid    magenta — the last hue in the categorical set that is not already
+//                     spoken for here and does not read as a status; a grid is
+//                     never urgent the way a new entity is
+export type SpotMarkerKey = 'new_pota' | 'new_county' | 'new_pfx' | 'worked_call' | 'new_grid';
+
+export type SpotMarker = {
+  key: SpotMarkerKey;
+  colour: string;  // a CSS colour — a var() reference, so it follows the theme
+  labelKey: string; // i18n key, short form (badge / legend)
+};
+
+// Order is the display order, in both panels.
+export const SPOT_MARKERS: SpotMarker[] = [
+  { key: 'new_pota', colour: 'var(--success)', labelKey: 'clg2.newPota' },
+  { key: 'new_county', colour: 'var(--chart-5)', labelKey: 'clg2.newCounty' },
+  { key: 'new_pfx', colour: 'var(--caution)', labelKey: 'clg2.newPfx' },
+  { key: 'new_grid', colour: 'var(--chart-7)', labelKey: 'clg2.newGrid' },
+  { key: 'worked_call', colour: 'var(--info)', labelKey: 'clg2.wkdCall' },
+];
+
+export const markerColour = (key: SpotMarkerKey): string =>
+  SPOT_MARKERS.find((m) => m.key === key)?.colour ?? 'var(--muted-foreground)';
+
+// activeMarkers returns the markers set on a status entry, in display order.
+export function activeMarkers(e: Record<string, unknown> | undefined): SpotMarker[] {
+  if (!e) return [];
+  return SPOT_MARKERS.filter((m) => !!e[m.key]);
+}

frontend/src/lib/sun.ts

@@ -0,0 +1,83 @@
+// Sunrise / sunset for a station, in UTC.
+//
+// Built on greyline.ts's sunPosition() rather than on a second implementation of
+// the solar equations: the map's terminator and the entry strip's sunrise must
+// never disagree, and there is a whole comment block over there about a sign
+// error that produced six months of plausible-looking wrong answers. One source
+// of astronomy, one place to be wrong.
+//
+// Everything is UTC. Amateur radio runs on UTC, the log is in UTC, and a local
+// time would raise the question "local to whom — me or the DX?".
+import { sunPosition } from './greyline';
+
+const DEG = Math.PI / 180;
+
+// Standard altitude of the Sun's centre at rise/set: half a solar diameter below
+// the horizon plus atmospheric refraction.
+const H0 = -0.833;
+
+// solarAltitude returns the Sun's elevation in degrees at a place and instant.
+function solarAltitude(date: Date, latDeg: number, lonDeg: number): number {
+	const { dec, gha } = sunPosition(date);
+	const ha = (gha + lonDeg) * DEG; // local hour angle
+	const d = dec * DEG;
+	const lat = latDeg * DEG;
+	return Math.asin(Math.sin(lat) * Math.sin(d) + Math.cos(lat) * Math.cos(d) * Math.cos(ha)) / DEG;
+}
+
+export type SunTimes = {
+	rise: string; // "HH:MM" UTC, "" when the Sun does not rise that day
+	set: string;
+	polarDay: boolean;   // Sun stays up all day
+	polarNight: boolean; // Sun never comes up
+};
+
+// sunTimes scans the UTC day a minute at a time and reports where the Sun
+// crosses the rise/set altitude.
+//
+// A scan, not the closed-form hour-angle formula, because the closed form needs
+// special-casing for the polar cases and for days where the declination shifts
+// enough to matter, and it silently returns NaN rather than saying "no sunrise
+// here today". 1440 evaluations is nothing, and the failure mode is honest: no
+// crossing found means no sunrise, which is a real answer above the Arctic
+// circle. The crossing minute is then refined by linear interpolation, so the
+// result is accurate to well under a minute despite the coarse scan.
+export function sunTimes(date: Date, latDeg: number, lonDeg: number): SunTimes {
+	const out: SunTimes = { rise: '', set: '', polarDay: false, polarNight: false };
+	if (!isFinite(latDeg) || !isFinite(lonDeg)) return out;
+
+	const start = Date.UTC(date.getUTCFullYear(), date.getUTCMonth(), date.getUTCDate());
+	const minute = 60000;
+	let prev = solarAltitude(new Date(start), latDeg, lonDeg);
+	const anyUp = prev > H0;
+	let anyDown = prev <= H0;
+	let sawUp = anyUp;
+
+	for (let i = 1; i <= 1440; i++) {
+		const alt = solarAltitude(new Date(start + i * minute), latDeg, lonDeg);
+		if (alt > H0) sawUp = true; else anyDown = true;
+		if (prev <= H0 && alt > H0 && !out.rise) {
+			out.rise = fmt(start + (i - 1 + frac(prev, alt)) * minute);
+		} else if (prev > H0 && alt <= H0 && !out.set) {
+			out.set = fmt(start + (i - 1 + frac(prev, alt)) * minute);
+		}
+		prev = alt;
+	}
+	if (!out.rise && !out.set) {
+		out.polarDay = sawUp && !anyDown;
+		out.polarNight = !sawUp;
+	}
+	return out;
+}
+
+// frac is where between two samples the altitude crosses H0.
+function frac(a: number, b: number): number {
+	const d = b - a;
+	return d === 0 ? 0 : (H0 - a) / d;
+}
+
+function fmt(ms: number): string {
+	const d = new Date(ms);
+	const p = (n: number) => String(n).padStart(2, '0');
+	return `${p(d.getUTCHours())}:${p(d.getUTCMinutes())}`;
+}

frontend/src/lib/textCase.ts

@@ -0,0 +1,28 @@
+// Capitalisation helpers for the free-text QSO fields (Name / QTH / Comment /
+// Note).
+//
+// The same station reaches the log SHOUTED by QRZ, lower-cased by a hurried
+// operator, and in whatever case the other logger stored it in an imported
+// ADIF — so one callsign ends up as "JEAN", "jean" and "Jean" across a log,
+// and sorting or reading a QTH column becomes a mess.
+//
+// Both helpers are meant to run on BLUR, never per keystroke: rewriting the
+// value while the operator is still typing a word fights them mid-word (see
+// the controlled-input note in CLAUDE.md).
+
+// titleCase upper-cases the first letter of every word and lower-cases the
+// rest. Separators are kept, so "SAINT-JULIEN" → "Saint-Julien" and
+// "o'brien" → "O'Brien".
+export function titleCase(s: string): string {
+  return s
+    .toLowerCase()
+    .replace(/(^|[\s\-'’/.])(\p{L})/gu, (_m, sep: string, ch: string) => sep + ch.toUpperCase());
+}
+
+// sentenceCase upper-cases the first letter and leaves everything after it as
+// typed. A comment routinely carries callsigns, modes and abbreviations
+// ("TNX QSO F5ABC, FT8 59") that lower-casing would quietly destroy — which is
+// why this is NOT titleCase.
+export function sentenceCase(s: string): string {
+  return s.replace(/^(\s*)(\p{L})/u, (_m, sp: string, ch: string) => sp + ch.toUpperCase());
+}

frontend/src/lib/theme.tsx

@@ -6,11 +6,16 @@ import { GetUIPref } from '../../wailsjs/go/main/App';
 // CSS variables in style.css key off of. 'auto' follows the OS light/dark
 // preference. The choice is persisted (localStorage + portable UI pref, so it
 // travels with the data/ folder like the language).
-export type ThemeChoice = 'auto' | 'light-warm' | 'light-cool' | 'light-sage' | 'dim-slate' | 'dark-warm' | 'dark-graphite' | 'high-contrast';
+export type ThemeChoice = 'auto' | 'light-warm' | 'light-cool' | 'light-sage' | 'light-nordic' | 'sahara'
+  | 'dim-slate' | 'dark-warm' | 'dark-graphite' | 'dark-indigo' | 'dark-teal' | 'dark-plum' | 'high-contrast';
 
-// Selectable, concrete themes (excludes 'auto') in display order.
+// Selectable, concrete themes (excludes 'auto') in display order: lights first,
+// then darks, with high-contrast last — it is an accessibility choice, not a
+// taste one, and listing it among the moods buries it.
 export const CONCRETE_THEMES: Exclude<ThemeChoice, 'auto'>[] = [
-  'light-warm', 'light-cool', 'light-sage', 'dim-slate', 'dark-warm', 'dark-graphite', 'high-contrast',
+  'light-warm', 'light-cool', 'light-sage', 'light-nordic', 'sahara',
+  'dim-slate', 'dark-warm', 'dark-graphite', 'dark-indigo', 'dark-teal', 'dark-plum',
+  'high-contrast',
 ];
 
 export const LS_KEY = 'opslog.theme';

frontend/src/lib/uiPref.ts

@@ -5,7 +5,7 @@
 // folder (data/) to another machine. These helpers mirror them into the DB
 // settings table (ui.* keys, like the grid columns) so the whole setup is
 // identical after a copy.
-import { GetUIPref, SetUIPref } from '../../wailsjs/go/main/App';
+import { GetUIPref, SetUIPref, LogUIError } from '../../wailsjs/go/main/App';
 
 // Keys that must travel with data/ (DB is the portable source of truth; the
 // localStorage copy is just a fast, synchronous cache).
@@ -17,6 +17,11 @@ const PORTABLE_KEYS = [
   'opslog.autofocusWB',   // auto-focus Worked-before
   'hamlog.filterPresets', // Filter Builder saved presets
   'opslog.showRotor',     // rotor compass shown next to the keyers
+  'opslog.rotorCompact',  // rotor widget: dial + SP/LP only, no quick-turn buttons or Stop
+  'opslog.decodesGridMap',// FT decodes tab: grid-square map shown beside the table
+  'opslog.showChaseNew',  // Chase New panel shown next to the keyers
+  'opslog.showAmpWidget', // amplifier widget shown next to the keyers
+  'opslog.ampSel.widget', // which amplifier that widget shows ("all" or an amp id)
   'opslog.showBeamOnMap', // antenna beam lobe drawn on the Main map
   'opslog.startEqualsEnd',// log TIME_ON = TIME_OFF (QSO time = completion time)
   'opslog.showQsoRate',   // QSO-rate meter (10/60 min) shown in the header
@@ -36,6 +41,19 @@ const PORTABLE_KEYS = [
   'opslog.clusterLockBand', 'opslog.clusterLockMode', 'opslog.clusterStatusFilter',
   'opslog.clusterModeFilter', 'opslog.clusterSearch', 'opslog.clusterHideWorked',
   'opslog.activeTab',     // last selected tab
+  'opslog.mainSplit',    // Main tab: width share of the left pane (percent) — legacy, read once to seed mainShares
+  'opslog.mainShares',   // Main tab: column shares per column count, as {2:[..],3:[..],4:[..]}
+  'opslog.mainQuad',     // Main tab: the 2x2 cross, as {col,row} percentages
+  'opslog.clusterMuteWorked',    // cluster/band map: no colour or badge on worked spots
+  'opslog.clusterSlotHighlight', // cluster/band map: colour calls not worked on this band+mode
+  'opslog.bandMapWidth',    // docked band map: column width (px)
+  'opslog.bandMapTabWidth', // Band map tab: shared card width (px)
+  'opslog.bandMapZoom',     // band map zoom (px/kHz step) remembered per band, as one {band: index} map
+  'opslog.decodeColWidths', // FT decodes table: per-column widths (px), as one {col: px} map
+  'opslog.clusterMacros',   // cluster console: the twelve named command buttons
+  'opslog.clusterHideSpots', // cluster console: hide the DX spot flood so replies are readable
+  'opslog.clusterConsoleFollow', // cluster console: keep the view pinned to the newest line
+  'opslog.gridMapColorConfirmed', 'opslog.gridMapColorWorked', // grid map: chosen fills (empty = follow the theme)
   // NOTE: 'hamlog.awardColsShown' and the grid column layouts are NOT listed here.
   // They are handled by lib/gridPrefs, which scopes the localStorage cache PER
   // PROFILE and mirrors to the DB (already per-profile) itself — mirroring them
@@ -65,5 +83,11 @@ export async function syncPortablePrefs(): Promise<void> {
 // Use it everywhere these keys are written instead of localStorage.setItem.
 export function writeUiPref(key: string, value: string): void {
   try { localStorage.setItem(key, value); } catch { /* quota / private mode */ }
-  SetUIPref(key, value).catch(() => { /* DB unavailable — the cache still holds it */ });
+  SetUIPref(key, value).catch((e: any) => {
+    // The cache still holds it, so the interface behaves — but the BACKEND
+    // reads some of these keys too (digital-mode grouping decides how the
+    // cluster judges a slot). A write that reaches localStorage and not the
+    // database makes the two disagree, and used to do so in silence.
+    try { LogUIError("ui pref", "could not store " + key + ": " + String(e?.message ?? e), ""); } catch {}
+  });
 }

frontend/src/style.css

@@ -85,6 +85,12 @@
   --mx-dx-conf:   #3730a3;   /* entity confirmed*/
   --mx-dx-work:   #a5b4fc;   /* entity worked   */
   --mx-none:      #e7e5e4;   /* never worked    */
+  /* Ring on the cell the operator is entering. Declared ONCE, on :root, and
+     deliberately not repeated per theme: it follows --warning, which every theme
+     already tunes to its own background. The token exists so the matrix ring can
+     be recoloured on its own without dragging every other warning in the app
+     with it (Appearance → matrix colours). */
+  --mx-cur: var(--warning);
 
   --scrollbar-thumb: #b8a880;
   --scrollbar-thumb-hover: #968455;
@@ -495,6 +501,362 @@
   color-scheme: dark;
 }
 
+/* ---- Theme 5: Indigo — deep blue-violet, electric accent ----------------
+   The first seven themes are all neutral (beige, slate, graphite, black) with an
+   orange accent, so "another dark theme" only ever meant another grey. These
+   four carry a real hue in the SURFACES, not just in the accent, and each takes
+   a different primary — violet, cyan, pink, indigo — so they are told apart at a
+   glance in the picker.
+
+   Every one keeps the same contract: the semantic colours (success / warning /
+   caution / danger / info) must stay recognisable as themselves. A logger is
+   read for hours and "red = a problem" cannot become a decorative choice, so the
+   hue budget is spent on the surfaces and the primary, never on the meanings. */
+[data-theme="dark-indigo"] {
+  --background: #0e0f1f;
+  --foreground: #e4e5f2;
+  --card: #181a30;
+  --card-foreground: #e4e5f2;
+  --popover: #181a30;
+  --popover-foreground: #e4e5f2;
+  --primary: #7c6cff;                /* electric violet */
+  --primary-foreground: #0b0a1a;
+  --secondary: #222542;
+  --secondary-foreground: #e4e5f2;
+  --muted: #1e2038;
+  --muted-foreground: #9d9fbe;
+  --accent: #2a2d51;
+  --accent-foreground: #c7c9ee;
+  --destructive: #f2555a;
+  --destructive-foreground: #12030a;
+  --destructive-muted: #34131c;
+  --destructive-muted-foreground: #fca5a5;
+  --border: #2a2d4c;
+  --input: #2a2d4c;
+  --ring: #9b8dff;
+
+  --success: #34d399;
+  --success-foreground: #052018;
+  --success-muted: #0e2f27;
+  --success-muted-foreground: #6ee7b7;
+  --success-border: #165241;
+
+  --warning: #fbbf24;
+  --warning-foreground: #221803;
+  --warning-muted: #33280f;
+  --warning-muted-foreground: #fcd34d;
+  --warning-border: #4f3e15;
+
+  --caution: #facc15;
+  --caution-foreground: #221e04;
+  --caution-muted: #322d0e;
+  --caution-muted-foreground: #fde047;
+  --caution-border: #4b4315;
+
+  --danger: #fb7185;
+  --danger-foreground: #250912;
+  --danger-muted: #37151f;
+  --danger-muted-foreground: #fda4af;
+  --danger-border: #562533;
+
+  --info: #38bdf8;
+  --info-foreground: #051d29;
+  --info-muted: #0b2a3a;
+  --info-muted-foreground: #7dd3fc;
+  --info-border: #12475c;
+
+  /* The entity ramp moves to CYAN here: violet is the primary, and a violet
+     "entity confirmed" cell would read as a button. */
+  --mx-call-conf: #22c55e;
+  --mx-call-work: #2c7a52;
+  --mx-dx-conf:   #22d3ee;
+  --mx-dx-work:   #1b6b7c;
+  --mx-none:      #2c2f4d;
+
+  --scrollbar-thumb: #383c63;
+  --scrollbar-thumb-hover: #4c5182;
+  --card-shadow: 0 1px 2px rgba(0, 0, 0, 0.5), 0 0 0 1px rgba(228, 229, 242, 0.05);
+  color-scheme: dark;
+}
+
+/* ---- Theme 6: Ocean — deep teal, cyan accent --------------------------- */
+[data-theme="dark-teal"] {
+  --background: #061c21;
+  --foreground: #dcecee;
+  --card: #0d2c33;
+  --card-foreground: #dcecee;
+  --popover: #0d2c33;
+  --popover-foreground: #dcecee;
+  --primary: #22d3ee;                /* cyan */
+  --primary-foreground: #041d24;
+  --secondary: #143b44;
+  --secondary-foreground: #dcecee;
+  --muted: #10333b;
+  --muted-foreground: #92b4ba;
+  --accent: #15424c;
+  --accent-foreground: #a5d8e0;
+  --destructive: #f2555a;
+  --destructive-foreground: #12030a;
+  --destructive-muted: #35161a;
+  --destructive-muted-foreground: #fca5a5;
+  --border: #1a4652;
+  --input: #1a4652;
+  --ring: #5fe3f5;
+
+  --success: #4ade80;
+  --success-foreground: #04220f;
+  --success-muted: #0e3020;
+  --success-muted-foreground: #86efac;
+  --success-border: #17593a;
+
+  --warning: #fbbf24;
+  --warning-foreground: #221803;
+  --warning-muted: #33280f;
+  --warning-muted-foreground: #fcd34d;
+  --warning-border: #4f3e15;
+
+  --caution: #facc15;
+  --caution-foreground: #221e04;
+  --caution-muted: #312d0e;
+  --caution-muted-foreground: #fde047;
+  --caution-border: #4a4315;
+
+  --danger: #fb7185;
+  --danger-foreground: #250912;
+  --danger-muted: #38161f;
+  --danger-muted-foreground: #fda4af;
+  --danger-border: #572634;
+
+  /* Info moves to a BLUE: a cyan "info" would be the primary colour again. */
+  --info: #7aa2f7;
+  --info-foreground: #04122e;
+  --info-muted: #16233f;
+  --info-muted-foreground: #a9c2fb;
+  --info-border: #2b3d66;
+
+  --mx-call-conf: #4ade80;
+  --mx-call-work: #2b7a4d;
+  --mx-dx-conf:   #a78bfa;
+  --mx-dx-work:   #5b4a9c;
+  --mx-none:      #1c4550;
+
+  --scrollbar-thumb: #235a68;
+  --scrollbar-thumb-hover: #31788a;
+  --card-shadow: 0 1px 2px rgba(0, 0, 0, 0.5), 0 0 0 1px rgba(220, 236, 238, 0.05);
+  color-scheme: dark;
+}
+
+/* ---- Theme 7: Plum — aubergine, magenta accent ------------------------- */
+[data-theme="dark-plum"] {
+  --background: #180f1e;
+  --foreground: #eee0f0;
+  --card: #251830;
+  --card-foreground: #eee0f0;
+  --popover: #251830;
+  --popover-foreground: #eee0f0;
+  --primary: #f472b6;                /* magenta-pink */
+  --primary-foreground: #250518;
+  --secondary: #33203f;
+  --secondary-foreground: #eee0f0;
+  --muted: #2b1b36;
+  --muted-foreground: #b39dbd;
+  --accent: #3b2648;
+  --accent-foreground: #dcc2e6;
+  --destructive: #f2555a;
+  --destructive-foreground: #12030a;
+  --destructive-muted: #3a1620;
+  --destructive-muted-foreground: #fca5a5;
+  --border: #3a2547;
+  --input: #3a2547;
+  --ring: #f9a8d4;
+
+  --success: #34d399;
+  --success-foreground: #052018;
+  --success-muted: #10302a;
+  --success-muted-foreground: #6ee7b7;
+  --success-border: #1a5745;
+
+  --warning: #fbbf24;
+  --warning-foreground: #221803;
+  --warning-muted: #352a12;
+  --warning-muted-foreground: #fcd34d;
+  --warning-border: #524019;
+
+  --caution: #facc15;
+  --caution-foreground: #221e04;
+  --caution-muted: #342e12;
+  --caution-muted-foreground: #fde047;
+  --caution-border: #4e4519;
+
+  /* Danger goes RED here, not rose: a rose "danger" beside a pink primary is
+     indistinguishable, and this is the one colour that must never be missed. */
+  --danger: #f43f3f;
+  --danger-foreground: #2a0606;
+  --danger-muted: #3d1418;
+  --danger-muted-foreground: #fca5a5;
+  --danger-border: #5c2128;
+
+  --info: #38bdf8;
+  --info-foreground: #051d29;
+  --info-muted: #0f2b3a;
+  --info-muted-foreground: #7dd3fc;
+  --info-border: #16485d;
+
+  --mx-call-conf: #22c55e;
+  --mx-call-work: #2f7d55;
+  --mx-dx-conf:   #60a5fa;
+  --mx-dx-work:   #35538c;
+  --mx-none:      #3a2647;
+
+  --scrollbar-thumb: #4a3159;
+  --scrollbar-thumb-hover: #644176;
+  --card-shadow: 0 1px 2px rgba(0, 0, 0, 0.5), 0 0 0 1px rgba(238, 224, 240, 0.05);
+  color-scheme: dark;
+}
+
+/* ---- Theme 8: Nordic light — crisp cool white, indigo accent ----------- */
+[data-theme="light-nordic"] {
+  --background: #eef1f7;
+  --foreground: #1b2130;
+  --card: #ffffff;
+  --card-foreground: #1b2130;
+  --popover: #ffffff;
+  --popover-foreground: #1b2130;
+  --primary: #4f46e5;                /* indigo */
+  --primary-foreground: #ffffff;
+  --secondary: #dfe4ee;
+  --secondary-foreground: #1b2130;
+  --muted: #e2e7f0;
+  --muted-foreground: #4a5468;
+  --accent: #dcdcfb;
+  --accent-foreground: #312a91;
+  --destructive: #b91c1c;
+  --destructive-foreground: #ffffff;
+  --destructive-muted: #fef2f2;
+  --destructive-muted-foreground: #b91c1c;
+  --border: #c9d1e0;
+  --input: #c9d1e0;
+  --ring: #6366f1;
+
+  --success: #15803d;
+  --success-foreground: #ffffff;
+  --success-muted: #dcfce7;
+  --success-muted-foreground: #14532d;
+  --success-border: #86efac;
+
+  --warning: #b45309;
+  --warning-foreground: #ffffff;
+  --warning-muted: #fef3c7;
+  --warning-muted-foreground: #92400e;
+  --warning-border: #fcd34d;
+
+  --caution: #a16207;
+  --caution-foreground: #ffffff;
+  --caution-muted: #fef9c3;
+  --caution-muted-foreground: #854d0e;
+  --caution-border: #fde047;
+
+  --danger: #dc2626;
+  --danger-foreground: #ffffff;
+  --danger-muted: #fee2e2;
+  --danger-muted-foreground: #991b1b;
+  --danger-border: #fca5a5;
+
+  --info: #0369a1;
+  --info-foreground: #ffffff;
+  --info-muted: #e0f2fe;
+  --info-muted-foreground: #075985;
+  --info-border: #7dd3fc;
+
+  /* Entity ramp shifts to TEAL: indigo is the primary here. */
+  --mx-call-conf: #15803d;
+  --mx-call-work: #86efac;
+  --mx-dx-conf:   #0f766e;
+  --mx-dx-work:   #99f6e4;
+  --mx-none:      #dde3ec;
+
+  --scrollbar-thumb: #b6c0d2;
+  --scrollbar-thumb-hover: #93a0b8;
+  --card-shadow: 0 1px 2px rgba(27, 33, 48, 0.06), 0 0 0 1px rgba(27, 33, 48, 0.03);
+  color-scheme: light;
+}
+
+/* ---- Theme 1e: Sahara — Warm light, taken a step deeper --------------------
+   Warm light's cream is kept for panels and the entry strip (#faf6eb, the one
+   surface an operator stares at while typing a call), but the page behind them
+   and every toolbar, tab bar and table header go one shade further into the
+   sand. That was the whole request: same family, just a little darker, so the
+   cream panels lift clearly instead of blending into the page.
+   Ink is a deep warm brown rather than black: pure black on sand glares.
+   The accent moves from Warm light's burnt orange to ochre to keep the two
+   themes apart at a glance in the theme picker. ---------------------------- */
+[data-theme="sahara"] {
+  --background: #e6ded0;            /* parchment — the page */
+  --foreground: #3a3227;            /* warm brown-ink */
+  --card: #f3eee2;                  /* panels, entry strip, log rows */
+  --card-foreground: #3a3227;
+  --popover: #f3eee2;
+  --popover-foreground: #3a3227;
+  --primary: #c4501e;               /* terracotta — buttons and the frequency */
+  --primary-foreground: #fdf8f0;
+  --secondary: #ded5c4;
+  --secondary-foreground: #3a3227;
+  --muted: #ded5c4;                 /* toolbars / tab bar / table headers */
+  --muted-foreground: #6a5f4e;      /* readable on both parchments */
+  --accent: #ecd9c0;                /* warm highlight */
+  --accent-foreground: #7a3410;
+  --destructive: #b3401b;
+  --destructive-foreground: #ffffff;
+  --destructive-muted: #f7e4da;
+  --destructive-muted-foreground: #8f3315;
+  --border: #cdc2ae;                /* one step down, so edges read without lines */
+  --input: #cdc2ae;
+  --ring: #c4501e;                  /* the accent, so focus matches the buttons */
+
+  --success: #15803d;
+  --success-foreground: #ffffff;
+  --success-muted: #dcf3e1;
+  --success-muted-foreground: #14532d;
+  --success-border: #86d99f;
+
+  --warning: #b45309;
+  --warning-foreground: #ffffff;
+  --warning-muted: #fbeacd;
+  --warning-muted-foreground: #7c3d05;
+  --warning-border: #e8b96a;
+
+  --caution: #a16207;
+  --caution-foreground: #1c1917;
+  --caution-muted: #f7edcb;
+  --caution-muted-foreground: #713f12;
+  --caution-border: #e0c069;
+
+  --danger: #be123c;
+  --danger-foreground: #ffffff;
+  --danger-muted: #fbe3e8;
+  --danger-muted-foreground: #9f1239;
+  --danger-border: #ee9aac;
+
+  --info: #0369a1;
+  --info-foreground: #ffffff;
+  --info-muted: #e0eef6;
+  --info-muted-foreground: #075985;
+  --info-border: #86c5e4;
+
+  /* Band/mode matrix — the app's blues kept, on a sand neutral so an empty slot
+     recedes into the grid instead of punching a hole in it. */
+  --mx-call-conf: #15803d;
+  --mx-call-work: #7fd6a4;
+  --mx-dx-conf:   #3730a3;
+  --mx-dx-work:   #a5b4fc;
+  --mx-none:      #ded5c4;
+
+  --scrollbar-thumb: #c2b6a0;
+  --scrollbar-thumb-hover: #a5977e;
+  --card-shadow: 0 1px 2px rgba(58, 50, 39, 0.06), 0 0 0 1px rgba(58, 50, 39, 0.03);
+  color-scheme: light;
+}
+
 /* ── Data-viz palette (Statistics dashboard) ────────────────────────────────
    A VALIDATED categorical palette, not hand-picked: the slot ORDER is what makes
    it colour-blind-safe (worst adjacent ΔE 24.2 light / 10.3 dark), so never
@@ -512,7 +874,9 @@
 :root,
 [data-theme="light-warm"],
 [data-theme="light-cool"],
-[data-theme="light-sage"] {
+[data-theme="light-sage"],
+[data-theme="light-nordic"],
+[data-theme="sahara"] {
   --chart-1: #2a78d6; /* blue    — default single-series hue */
   --chart-2: #1baf7a; /* aqua    */
   --chart-3: #eda100; /* yellow  */
@@ -533,7 +897,10 @@
 [data-theme="dim-slate"],
 [data-theme="dark-warm"],
 [data-theme="dark-graphite"],
-[data-theme="high-contrast"] {
+[data-theme="high-contrast"],
+[data-theme="dark-indigo"],
+[data-theme="dark-teal"],
+[data-theme="dark-plum"] {
   --chart-1: #3987e5;
   --chart-2: #199e70;
   --chart-3: #c98500;
@@ -613,6 +980,7 @@
   --color-mx-dx-conf: var(--mx-dx-conf);
   --color-mx-dx-work: var(--mx-dx-work);
   --color-mx-none: var(--mx-none);
+  --color-mx-cur: var(--mx-cur);
 
   --radius: 0.5rem;
 
@@ -623,6 +991,18 @@
 @layer base {
   * { @apply border-border; }
   html, body, #root { height: 100%; }
+  /* No rubber-band, and no swipe-to-navigate.
+
+     Chromium lets a scroll that has reached the end pull the content a few
+     pixels and spring back, and a two-finger horizontal swipe means "go back a
+     page". Both are browser behaviours that have no meaning in a logbook: the
+     first makes a table wobble at the bottom of a list, and the second can
+     navigate the WebView away from the app entirely — a blank window and a
+     restart. Neither shows up with a mouse, which is why they went unnoticed;
+     they arrive with a precision touchpad or a touchscreen.
+
+     A no-op wherever the effects don't occur. */
+  html, body { overscroll-behavior: none; }
   /* Root rem base. Tailwind sizing (text/heights/padding/gaps) is in rem, so
      this is the single global density knob — shrinks the whole UI uniformly
      while Leaflet maps (px-based) stay correct. Default browser base is 16px. */
@@ -679,10 +1059,23 @@
    disappears on the dark themes. Invert it there — the control itself is worth
    keeping (OS calendar, locale date order, keyboard entry), only its icon needs
    help. */
-[data-theme='dim-slate'] input[type='date']::-webkit-calendar-picker-indicator,
+   Every temporal input carries the same glyph, so the rule names them all:
-[data-theme='dark-warm'] input[type='date']::-webkit-calendar-picker-indicator,
+   datetime-local was left out at first and its icon stayed invisible. */
-[data-theme='dark-graphite'] input[type='date']::-webkit-calendar-picker-indicator,
+:is([data-theme='dim-slate'], [data-theme='dark-warm'], [data-theme='dark-graphite'], [data-theme='high-contrast'],
-[data-theme='high-contrast'] input[type='date']::-webkit-calendar-picker-indicator {
+    [data-theme='dark-indigo'], [data-theme='dark-teal'], [data-theme='dark-plum'])
-  filter: invert(1) brightness(1.6);
+  :is(input[type='date'], input[type='datetime-local'], input[type='time'], input[type='month'], input[type='week'])::-webkit-calendar-picker-indicator {
-  opacity: 0.75;
+  filter: invert(1) brightness(1.8);
+  opacity: 0.9;
+}
+
+/* Every scrollable pane keeps its overscroll to itself.
+
+   "contain" (not "none") on the inside: the pane still scrolls normally, it
+   simply stops passing the leftover motion up to its parent — which is how
+   scrolling a grid to its end used to tug the panel behind it. */
+.overflow-auto,
+.overflow-y-auto,
+.overflow-x-auto,
+.overflow-scroll {
+  overscroll-behavior: contain;
 }

frontend/src/version.ts

@@ -1,6 +1,6 @@
 // Single source of truth for the app version shown in the UI (header + About).
 // Bump this on a release (the release script updates it alongside telemetry.go).
-export const APP_VERSION = '0.22.3';
+export const APP_VERSION = '0.26.6';
 
 // Author / credits, shown in Help -> About.
 export const APP_AUTHOR = 'F4BPO';

frontend/wailsjs/go/main/App.d.ts

@@ -10,12 +10,16 @@ import {catemu} from '../models';
 import {antgenius} from '../models';
 import {award} from '../models';
 import {awardref} from '../models';
+import {bandopen} from '../models';
 import {cluster} from '../models';
 import {extsvc} from '../models';
 import {powergenius} from '../models';
+import {pskr} from '../models';
+import {psu} from '../models';
 import {spe} from '../models';
 import {solar} from '../models';
 import {tunergenius} from '../models';
+import {webpub} from '../models';
 import {winkeyer} from '../models';
 import {alerts} from '../models';
 import {audio} from '../models';
@@ -49,6 +53,8 @@ export function AmpPower(arg1:string,arg2:boolean):Promise<void>;
 
 export function AmpPowerLevel(arg1:string,arg2:string):Promise<void>;
 
+export function AnswerDecode(arg1:string,arg2:number,arg3:number,arg4:number,arg5:number,arg6:string,arg7:string,arg8:boolean):Promise<void>;
+
 export function AntGeniusActivate(arg1:number,arg2:number):Promise<void>;
 
 export function AntGeniusDeselect(arg1:number):Promise<void>;
@@ -61,6 +67,8 @@ export function ApplyAwardUpdate(arg1:string):Promise<void>;
 
 export function AssignAwardRefToQSOs(arg1:string,arg2:string,arg3:Array<number>):Promise<number>;
 
+export function AudioApplyLevels(arg1:number,arg2:number):Promise<void>;
+
 export function AudioMonitorActive():Promise<boolean>;
 
 export function AudioStartMonitor():Promise<void>;
@@ -73,7 +81,7 @@ export function AudioStopTX():Promise<void>;
 
 export function AudioTXActive():Promise<boolean>;
 
-export function AwardCellQSOs(arg1:string,arg2:string,arg3:string):Promise<Array<qso.QSO>>;
+export function AwardCellQSOs(arg1:string,arg2:string,arg3:string,arg4:string):Promise<Array<qso.QSO>>;
 
 export function AwardFields():Promise<Array<string>>;
 
@@ -81,10 +89,18 @@ export function AwardMissingQSOs(arg1:string):Promise<Array<qso.QSO>>;
 
 export function AwardRefsForQSOs(arg1:Array<number>):Promise<Record<number, Record<string, string>>>;
 
+export function AwardRefsNew(arg1:Array<string>):Promise<main.AwardRefNewResult>;
+
 export function AwardsFolder():Promise<string>;
 
+export function BackfillDistances():Promise<main.BackfillDistancesResult>;
+
+export function BackfillRDA(arg1:boolean):Promise<main.BackfillRDAResult>;
+
 export function BackfillUSCounties():Promise<main.BackfillUSCountiesResult>;
 
+export function BandSlotQSOs(arg1:string,arg2:number,arg3:string,arg4:string):Promise<Array<qso.QSO>>;
+
 export function BrowseExecutable():Promise<string>;
 
 export function BulkUpdateField(arg1:Array<number>,arg2:string,arg3:string):Promise<number>;
@@ -95,14 +111,20 @@ export function CIVTraceEnabled():Promise<boolean>;
 
 export function CWDecoderRunning():Promise<boolean>;
 
+export function CancelConfirmations():Promise<void>;
+
 export function ChatAvailable():Promise<boolean>;
 
 export function CheckForUpdate():Promise<main.UpdateInfo>;
 
 export function ClearLookupCache():Promise<void>;
 
+export function CloseAutostartPrograms():Promise<void>;
+
 export function ClusterSpotStatuses(arg1:Array<main.SpotQuery>):Promise<Array<main.SpotStatus>>;
 
+export function CompactDatabase(arg1:string):Promise<main.CompactResult>;
+
 export function ComputeQSOAwardRefs(arg1:qso.QSO):Promise<Array<main.QSOAwardRef>>;
 
 export function ComputeStationInfo(arg1:string,arg2:string):Promise<main.StationInfoComputed>;
@@ -165,6 +187,8 @@ export function DiscoverFlexRadios():Promise<Array<cat.FlexRadio>>;
 
 export function DismissAwardUpdate(arg1:string):Promise<void>;
 
+export function DismissQSLViaRepair():Promise<void>;
+
 export function DownloadAllReferenceLists():Promise<string>;
 
 export function DownloadAndApplyUpdate(arg1:string):Promise<void>;
@@ -183,6 +207,8 @@ export function DownloadULSCounties():Promise<void>;
 
 export function DuplicateProfile(arg1:number,arg2:string):Promise<profile.Profile>;
 
+export function EntryBandChanged(arg1:string):Promise<void>;
+
 export function ExplainAward(arg1:string,arg2:string):Promise<Array<main.AwardExplain>>;
 
 export function ExportADIF(arg1:string,arg2:boolean,arg3:Array<string>):Promise<adif.ExportResult>;
@@ -217,6 +243,8 @@ export function FlexAmpOperate(arg1:boolean):Promise<void>;
 
 export function FlexApplyBandAntenna(arg1:string):Promise<void>;
 
+export function FlexApplyBandPower(arg1:string,arg2:string):Promise<void>;
+
 export function FlexBackspaceCW(arg1:number):Promise<void>;
 
 export function FlexMox(arg1:boolean):Promise<void>;
@@ -337,8 +365,12 @@ export function FlexSetXITFreq(arg1:number):Promise<void>;
 
 export function FlexStopCW():Promise<void>;
 
+export function FlexTXOnBand(arg1:string):Promise<void>;
+
 export function FlexTune(arg1:boolean):Promise<void>;
 
+export function FlexZoomForSpot(arg1:string,arg2:number):Promise<void>;
+
 export function GetACOMStatus():Promise<acom.Status>;
 
 export function GetADIFMonitor():Promise<main.ADIFMonitorConfig>;
@@ -361,7 +393,7 @@ export function GetAudioSettings():Promise<main.AudioSettings>;
 
 export function GetAutostartPrograms():Promise<Array<main.AutostartProgram>>;
 
-export function GetAward(arg1:string):Promise<award.Result>;
+export function GetAward(arg1:string,arg2:string):Promise<award.Result>;
 
 export function GetAwardDefs():Promise<Array<award.Def>>;
 
@@ -377,6 +409,10 @@ export function GetAwards():Promise<Array<award.Result>>;
 
 export function GetBackupSettings():Promise<main.BackupSettings>;
 
+export function GetBandOpenSettings():Promise<main.BandOpenSettings>;
+
+export function GetBandOpenings():Promise<Array<bandopen.Opening>>;
+
 export function GetCATSettings():Promise<main.CATSettings>;
 
 export function GetCATState():Promise<cat.RigState>;
@@ -387,6 +423,12 @@ export function GetCatalogCodes():Promise<Array<string>>;
 
 export function GetChangelog():Promise<Array<main.ChangelogEntry>>;
 
+export function GetChaseNew():Promise<boolean>;
+
+export function GetChaseNewGrids():Promise<boolean>;
+
+export function GetChaseNewSpots():Promise<Array<main.ChaseNewSpot>>;
+
 export function GetChatHistory(arg1:number):Promise<Array<main.ChatMessage>>;
 
 export function GetClublogCtyInfo():Promise<main.ClublogCtyInfo>;
@@ -419,12 +461,28 @@ export function GetExternalServices():Promise<extsvc.ExternalServices>;
 
 export function GetFlexBandAntennas():Promise<Record<string, main.FlexBandAnt>>;
 
+export function GetFlexBandPower():Promise<Record<string, main.FlexBandPower>>;
+
 export function GetFlexState():Promise<cat.FlexTXState>;
 
+export function GetFlexZoom():Promise<main.FlexZoomSettings>;
+
+export function GetFolderSync():Promise<main.FolderSyncConfig>;
+
+export function GetFolderSyncStatus():Promise<main.FolderSyncStatus>;
+
+export function GetGridCacheStatus():Promise<main.GridCacheStatus>;
+
+export function GetGridScopeSettings():Promise<main.GridScopeSettings>;
+
 export function GetIcomState():Promise<cat.IcomTXState>;
 
+export function GetLinkedAmps():Promise<Array<string>>;
+
 export function GetListsSettings():Promise<main.ListsSettings>;
 
+export function GetLiveOpenings():Promise<Array<bandopen.Opening>>;
+
 export function GetLiveStations():Promise<Array<main.LiveStation>>;
 
 export function GetLoTWUsersStatus():Promise<main.LoTWUsersStatus>;
@@ -437,6 +495,8 @@ export function GetLogbookRevision():Promise<string>;
 
 export function GetLookupSettings():Promise<main.LookupSettings>;
 
+export function GetMatrixColors():Promise<main.MatrixColors>;
+
 export function GetMySQLSettings():Promise<main.MySQLSettings>;
 
 export function GetOfflineStatus():Promise<main.OfflineStatus>;
@@ -451,6 +511,12 @@ export function GetPGXLStatus():Promise<powergenius.Status>;
 
 export function GetPOTAToken():Promise<string>;
 
+export function GetPSKReporterStatus():Promise<pskr.Status>;
+
+export function GetPSUSettings():Promise<main.PSUSettings>;
+
+export function GetPSUStatus():Promise<psu.Status>;
+
 export function GetPendingQSOs():Promise<Array<qso.QSO>>;
 
 export function GetQSLDefaults():Promise<main.QSLDefaults>;
@@ -463,7 +529,11 @@ export function GetRelayAuto():Promise<main.RelayAutoConfig>;
 
 export function GetRotatorHeading():Promise<main.RotatorHeading>;
 
-export function GetRotatorSettings():Promise<main.RotatorSettings>;
+export function GetRotators():Promise<Array<main.RotatorDevice>>;
+
+export function GetRotorPresets():Promise<Array<main.RotorPreset>>;
+
+export function GetRowColors():Promise<main.RowColorSettings>;
 
 export function GetSPEStatus():Promise<spe.Status>;
 
@@ -471,10 +541,16 @@ export function GetScpStatus():Promise<main.ScpStatus>;
 
 export function GetSecretStatus():Promise<main.SecretStatus>;
 
+export function GetSelfSpotSettings():Promise<main.SelfSpotSettings>;
+
 export function GetSlotStats():Promise<qso.SlotStats>;
 
 export function GetSolarData():Promise<solar.Data>;
 
+export function GetSpotColors():Promise<main.SpotColors>;
+
+export function GetSpotTTLMinutes():Promise<number>;
+
 export function GetStartupStatus():Promise<main.StartupStatus>;
 
 export function GetStationDevices():Promise<Array<main.StationDevice>>;
@@ -485,6 +561,8 @@ export function GetStationStatus():Promise<Array<main.StationDeviceStatus>>;
 
 export function GetTelemetryEnabled():Promise<boolean>;
 
+export function GetTrackedAwards():Promise<Array<string>>;
+
 export function GetTunerGeniusSettings():Promise<main.TunerGeniusSettings>;
 
 export function GetTunerGeniusStatus():Promise<tunergenius.Status>;
@@ -495,14 +573,24 @@ export function GetUltrabeamSettings():Promise<main.UltrabeamSettings>;
 
 export function GetUltrabeamStatus():Promise<main.UltrabeamStatusInfo>;
 
+export function GetWebPublishConfig():Promise<webpub.Config>;
+
+export function GetWebPublishStatus():Promise<main.WebPublishStatus>;
+
 export function GetWhatsNew():Promise<Array<main.ChangelogEntry>>;
 
 export function GetWinkeyerSettings():Promise<main.WinkeyerSettings>;
 
 export function GetWinkeyerStatus():Promise<winkeyer.Status>;
 
+export function GetWorkedCallVariants():Promise<boolean>;
+
 export function GetYaesuState():Promise<cat.YaesuTXState>;
 
+export function GridSquares(arg1:string):Promise<Array<qso.GridSquare>>;
+
+export function HaltDecodeTx(arg1:string,arg2:boolean):Promise<void>;
+
 export function HasBuiltinReferences(arg1:string):Promise<boolean>;
 
 export function IcomRefresh():Promise<void>;
@@ -599,6 +687,12 @@ export function ImportAwards():Promise<main.AwardImportResult>;
 
 export function InspectAwardImport():Promise<main.AwardImportPreview>;
 
+export function IsNewUSCounty(arg1:string,arg2:string):Promise<boolean>;
+
+export function KenwoodSendCW(arg1:string):Promise<void>;
+
+export function KenwoodStopCW():Promise<void>;
+
 export function LaunchAutostartProgram(arg1:string):Promise<main.AutostartLaunchResult>;
 
 export function LaunchAutostartPrograms():Promise<Array<main.AutostartLaunchResult>>;
@@ -641,14 +735,18 @@ export function LogUDPLoggedADIF(arg1:string):Promise<number>;
 
 export function LogUIError(arg1:string,arg2:string,arg3:string):Promise<void>;
 
-export function LookupCallsign(arg1:string):Promise<lookup.Result>;
+export function LookupCallsign(arg1:string,arg2:string):Promise<lookup.Result>;
 
-export function LookupCallsignFresh(arg1:string):Promise<lookup.Result>;
+export function LookupCallsignFresh(arg1:string,arg2:string):Promise<lookup.Result>;
+
+export function MotorNudgeKHz(arg1:number):Promise<void>;
 
 export function MotorReadElements():Promise<Array<number>>;
 
 export function MotorSetElement(arg1:number,arg2:number):Promise<void>;
 
+export function MotorTuneKHz(arg1:number):Promise<void>;
+
 export function MoveDatabase(arg1:string):Promise<void>;
 
 export function NetActivate(arg1:string):Promise<qso.QSO>;
@@ -699,18 +797,28 @@ export function PGXLSetFanMode(arg1:string):Promise<void>;
 
 export function PGXLSetOperate(arg1:boolean):Promise<void>;
 
+export function PTTHotkeyDown():Promise<void>;
+
+export function PTTHotkeyUp():Promise<void>;
+
 export function PickADIFMonitorFile():Promise<string>;
 
 export function PickAudioFolder():Promise<string>;
 
 export function PickBackupFolder():Promise<string>;
 
+export function PickFolderSyncFolder():Promise<string>;
+
 export function PickOpenDatabase():Promise<string>;
 
 export function PickSaveDatabase():Promise<string>;
 
 export function PopulateBuiltinReferences(arg1:string):Promise<number>;
 
+export function PublishLogNow():Promise<string>;
+
+export function QSLCopyTemplateToActiveProfile(arg1:number):Promise<number>;
+
 export function QSLDefaultTemplateID():Promise<number>;
 
 export function QSLDeleteTemplate(arg1:number):Promise<void>;
@@ -725,6 +833,8 @@ export function QSLGetEmailTemplates():Promise<main.QSLEmailTemplates>;
 
 export function QSLGetTemplate(arg1:number):Promise<string>;
 
+export function QSLListOtherProfileTemplates():Promise<Array<main.QSLForeignTemplate>>;
+
 export function QSLListTemplates():Promise<Array<main.QSLTemplateInfo>>;
 
 export function QSLPhotoDataURL(arg1:number,arg2:string):Promise<string>;
@@ -745,6 +855,8 @@ export function QSLSetDefaultTemplate(arg1:number):Promise<void>;
 
 export function QSLStylePresets():Promise<Array<main.QSLPresetInfo>>;
 
+export function QSLViaRepairStatus():Promise<main.QSLViaRepairStatus>;
+
 export function QSOAudioBegin():Promise<boolean>;
 
 export function QSOAudioCancel():Promise<void>;
@@ -765,8 +877,12 @@ export function QSOAudioStop():Promise<boolean>;
 
 export function QuitApp():Promise<void>;
 
+export function RDADatabaseCount():Promise<number>;
+
 export function RecomputeAllAwardRefs():Promise<number>;
 
+export function RecomputeAwardRefsForCode(arg1:string):Promise<number>;
+
 export function RefreshCtyDat():Promise<main.CtyDatInfo>;
 
 export function RefreshSolar():Promise<void>;
@@ -777,12 +893,16 @@ export function ReloadUDPIntegrations():Promise<Array<string>>;
 
 export function RemovePassphrase(arg1:string):Promise<void>;
 
+export function RenameAwardReference(arg1:string,arg2:string,arg3:string):Promise<void>;
+
 export function RenameDatabase(arg1:string):Promise<void>;
 
 export function RenameLogbook(arg1:string):Promise<void>;
 
 export function RenderEQSL(arg1:number,arg2:number):Promise<string>;
 
+export function RepairQSLVia():Promise<main.QSLViaRepairResult>;
+
 export function ReplaceAwardReferences(arg1:string,arg2:Array<awardref.Ref>):Promise<number>;
 
 export function ReportLiveActivity(arg1:number,arg2:string,arg3:string):Promise<void>;
@@ -793,6 +913,10 @@ export function ResetAwardDefs():Promise<Array<award.Def>>;
 
 export function ResetDatabaseToDefault():Promise<void>;
 
+export function ResetRotorPresets():Promise<Array<main.RotorPreset>>;
+
+export function ResetSpotColors():Promise<main.SpotColors>;
+
 export function RestartApp():Promise<void>;
 
 export function RestartQSORecorder():Promise<void>;
@@ -803,6 +927,8 @@ export function RevealDataFolder():Promise<void>;
 
 export function RotatorGoTo(arg1:number,arg2:number):Promise<void>;
 
+export function RotatorGoToPath(arg1:number,arg2:number,arg3:string):Promise<void>;
+
 export function RotatorPark():Promise<void>;
 
 export function RotatorStop():Promise<void>;
@@ -837,6 +963,8 @@ export function SaveAwardReference(arg1:string,arg2:awardref.Ref):Promise<void>;
 
 export function SaveBackupSettings(arg1:main.BackupSettings):Promise<void>;
 
+export function SaveBandOpenSettings(arg1:main.BandOpenSettings):Promise<void>;
+
 export function SaveCATSettings(arg1:main.CATSettings):Promise<void>;
 
 export function SaveCabrilloFile():Promise<string>;
@@ -849,10 +977,20 @@ export function SaveExternalServices(arg1:extsvc.ExternalServices):Promise<void>
 
 export function SaveFlexBandAntennas(arg1:Record<string, main.FlexBandAnt>):Promise<void>;
 
+export function SaveFlexBandPower(arg1:Record<string, main.FlexBandPower>):Promise<void>;
+
+export function SaveFlexZoom(arg1:main.FlexZoomSettings):Promise<void>;
+
+export function SaveFolderSync(arg1:main.FolderSyncConfig):Promise<void>;
+
+export function SaveGridScopeSettings(arg1:main.GridScopeSettings):Promise<void>;
+
 export function SaveListsSettings(arg1:main.ListsSettings):Promise<void>;
 
 export function SaveLookupSettings(arg1:main.LookupSettings):Promise<void>;
 
+export function SaveMatrixColors(arg1:main.MatrixColors):Promise<void>;
+
 export function SaveMySQLSettings(arg1:main.MySQLSettings):Promise<void>;
 
 export function SaveOperatingAntenna(arg1:operating.Antenna):Promise<operating.Antenna>;
@@ -863,24 +1001,38 @@ export function SavePGXLSettings(arg1:main.PGXLSettings):Promise<void>;
 
 export function SavePOTAToken(arg1:string):Promise<void>;
 
+export function SavePSUSettings(arg1:main.PSUSettings):Promise<void>;
+
 export function SaveProfile(arg1:profile.Profile):Promise<profile.Profile>;
 
 export function SaveQSLDefaults(arg1:main.QSLDefaults):Promise<void>;
 
 export function SaveRelayAuto(arg1:main.RelayAutoConfig):Promise<void>;
 
-export function SaveRotatorSettings(arg1:main.RotatorSettings):Promise<void>;
+export function SaveRotators(arg1:Array<main.RotatorDevice>):Promise<void>;
+
+export function SaveRotorPresets(arg1:Array<main.RotorPreset>):Promise<void>;
+
+export function SaveRowColors(arg1:main.RowColorSettings):Promise<void>;
+
+export function SaveSelfSpotSettings(arg1:main.SelfSpotSettings):Promise<void>;
+
+export function SaveSpotColors(arg1:main.SpotColors):Promise<void>;
 
 export function SaveStationDevices(arg1:Array<main.StationDevice>):Promise<void>;
 
 export function SaveStationSettings(arg1:main.StationSettings):Promise<void>;
 
+export function SaveTrackedAwards(arg1:Array<string>):Promise<void>;
+
 export function SaveTunerGeniusSettings(arg1:main.TunerGeniusSettings):Promise<void>;
 
 export function SaveUDPIntegration(arg1:udp.Config):Promise<udp.Config>;
 
 export function SaveUltrabeamSettings(arg1:main.UltrabeamSettings):Promise<void>;
 
+export function SaveWebPublishConfig(arg1:webpub.Config):Promise<void>;
+
 export function SaveWinkeyerSettings(arg1:main.WinkeyerSettings):Promise<void>;
 
 export function ScpLookup(arg1:string):Promise<scp.Result>;
@@ -893,12 +1045,16 @@ export function SendClusterCommand(arg1:string):Promise<void>;
 
 export function SendClusterSpot(arg1:string,arg2:number,arg3:string):Promise<void>;
 
+export function SendDecodeFreeText(arg1:string,arg2:string,arg3:boolean):Promise<void>;
+
 export function SendEQSL(arg1:number,arg2:number,arg3:string):Promise<void>;
 
 export function SendLogToDeveloper():Promise<void>;
 
 export function SendQSORecordingEmail(arg1:number):Promise<void>;
 
+export function SetActiveRotor(arg1:number):Promise<void>;
+
 export function SetAlertEmailTo(arg1:string):Promise<void>;
 
 export function SetCATFrequency(arg1:number):Promise<void>;
@@ -909,20 +1065,38 @@ export function SetCIVTrace(arg1:boolean):Promise<void>;
 
 export function SetCWDecoderPitch(arg1:number):Promise<void>;
 
+export function SetChaseNew(arg1:boolean):Promise<void>;
+
+export function SetChaseNewGrids(arg1:boolean):Promise<void>;
+
 export function SetClublogCtyEnabled(arg1:boolean):Promise<void>;
 
 export function SetClublogMostWantedEnabled(arg1:boolean):Promise<void>;
 
 export function SetClusterAutoConnect(arg1:boolean):Promise<void>;
 
+export function SetCompactHeight(arg1:number):Promise<void>;
+
 export function SetCompactMode(arg1:boolean):Promise<void>;
 
 export function SetDVKLabel(arg1:number,arg2:string):Promise<void>;
 
+export function SetKenwoodKeySpeed(arg1:number):Promise<void>;
+
+export function SetLinkedAmps(arg1:Array<string>):Promise<void>;
+
+export function SetMotorFollow(arg1:boolean,arg2:number,arg3:string):Promise<void>;
+
+export function SetOpsLogQSLReceived(arg1:number,arg2:boolean):Promise<void>;
+
+export function SetPSUOutput(arg1:boolean):Promise<void>;
+
 export function SetPassphrase(arg1:string):Promise<void>;
 
 export function SetScpEnabled(arg1:boolean):Promise<void>;
 
+export function SetSpotTTLMinutes(arg1:number):Promise<void>;
+
 export function SetTelemetryEnabled(arg1:boolean):Promise<void>;
 
 export function SetUIPref(arg1:string,arg2:string):Promise<void>;
@@ -931,6 +1105,8 @@ export function SetUltrabeamDirection(arg1:number):Promise<void>;
 
 export function SetWinkeyerTrace(arg1:boolean):Promise<void>;
 
+export function SetWorkedCallVariants(arg1:boolean):Promise<void>;
+
 export function SetYaesuAFGain(arg1:number):Promise<void>;
 
 export function SetYaesuAGC(arg1:string):Promise<void>;
@@ -977,8 +1153,12 @@ export function StopCWDecoder():Promise<void>;
 
 export function SwitchCATRig(arg1:number):Promise<void>;
 
+export function SyncFolderNow():Promise<number>;
+
 export function SyncPOTAHunterLog(arg1:boolean,arg2:boolean):Promise<main.POTASyncResult>;
 
+export function TailLogFile(arg1:number):Promise<string>;
+
 export function TestCloudlogUpload():Promise<string>;
 
 export function TestClublogUpload():Promise<string>;
@@ -999,12 +1179,14 @@ export function TestPTT(arg1:main.AudioSettings):Promise<void>;
 
 export function TestQRZUpload():Promise<string>;
 
-export function TestRotator(arg1:main.RotatorSettings):Promise<void>;
+export function TestRotatorDevice(arg1:main.RotatorDevice,arg2:number):Promise<void>;
 
 export function TestStationDevice(arg1:main.StationDevice):Promise<main.StationTestResult>;
 
 export function TestUltrabeam(arg1:main.UltrabeamSettings):Promise<void>;
 
+export function TestWebPublishFTP(arg1:webpub.Config):Promise<string>;
+
 export function TuneYaesuATU():Promise<void>;
 
 export function TunerGeniusActivate(arg1:number):Promise<void>;
@@ -1027,6 +1209,8 @@ export function UpdateAwardReferenceList(arg1:string):Promise<main.AwardRefMeta>
 
 export function UpdateQSO(arg1:qso.QSO):Promise<void>;
 
+export function UpdateQSOsCountyFromULS(arg1:Array<number>):Promise<number>;
+
 export function UpdateQSOsFromClublog(arg1:Array<number>):Promise<number>;
 
 export function UpdateQSOsFromCty(arg1:Array<number>):Promise<number>;
@@ -1037,6 +1221,8 @@ export function UploadCallsign(arg1:string):Promise<string>;
 
 export function UploadQSOsManual(arg1:string,arg2:Array<number>):Promise<void>;
 
+export function WebPublishColumns():Promise<Array<Record<string, string>>>;
+
 export function WinkeyerBackspace():Promise<void>;
 
 export function WinkeyerConnect():Promise<void>;

frontend/wailsjs/go/main/App.js

@@ -46,6 +46,10 @@ export function AmpPowerLevel(arg1, arg2) {
   return window['go']['main']['App']['AmpPowerLevel'](arg1, arg2);
 }
 
+export function AnswerDecode(arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8) {
+  return window['go']['main']['App']['AnswerDecode'](arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8);
+}
+
 export function AntGeniusActivate(arg1, arg2) {
   return window['go']['main']['App']['AntGeniusActivate'](arg1, arg2);
 }
@@ -70,6 +74,10 @@ export function AssignAwardRefToQSOs(arg1, arg2, arg3) {
   return window['go']['main']['App']['AssignAwardRefToQSOs'](arg1, arg2, arg3);
 }
 
+export function AudioApplyLevels(arg1, arg2) {
+  return window['go']['main']['App']['AudioApplyLevels'](arg1, arg2);
+}
+
 export function AudioMonitorActive() {
   return window['go']['main']['App']['AudioMonitorActive']();
 }
@@ -94,8 +102,8 @@ export function AudioTXActive() {
   return window['go']['main']['App']['AudioTXActive']();
 }
 
-export function AwardCellQSOs(arg1, arg2, arg3) {
+export function AwardCellQSOs(arg1, arg2, arg3, arg4) {
-  return window['go']['main']['App']['AwardCellQSOs'](arg1, arg2, arg3);
+  return window['go']['main']['App']['AwardCellQSOs'](arg1, arg2, arg3, arg4);
 }
 
 export function AwardFields() {
@@ -110,14 +118,30 @@ export function AwardRefsForQSOs(arg1) {
   return window['go']['main']['App']['AwardRefsForQSOs'](arg1);
 }
 
+export function AwardRefsNew(arg1) {
+  return window['go']['main']['App']['AwardRefsNew'](arg1);
+}
+
 export function AwardsFolder() {
   return window['go']['main']['App']['AwardsFolder']();
 }
 
+export function BackfillDistances() {
+  return window['go']['main']['App']['BackfillDistances']();
+}
+
+export function BackfillRDA(arg1) {
+  return window['go']['main']['App']['BackfillRDA'](arg1);
+}
+
 export function BackfillUSCounties() {
   return window['go']['main']['App']['BackfillUSCounties']();
 }
 
+export function BandSlotQSOs(arg1, arg2, arg3, arg4) {
+  return window['go']['main']['App']['BandSlotQSOs'](arg1, arg2, arg3, arg4);
+}
+
 export function BrowseExecutable() {
   return window['go']['main']['App']['BrowseExecutable']();
 }
@@ -138,6 +162,10 @@ export function CWDecoderRunning() {
   return window['go']['main']['App']['CWDecoderRunning']();
 }
 
+export function CancelConfirmations() {
+  return window['go']['main']['App']['CancelConfirmations']();
+}
+
 export function ChatAvailable() {
   return window['go']['main']['App']['ChatAvailable']();
 }
@@ -150,10 +178,18 @@ export function ClearLookupCache() {
   return window['go']['main']['App']['ClearLookupCache']();
 }
 
+export function CloseAutostartPrograms() {
+  return window['go']['main']['App']['CloseAutostartPrograms']();
+}
+
 export function ClusterSpotStatuses(arg1) {
   return window['go']['main']['App']['ClusterSpotStatuses'](arg1);
 }
 
+export function CompactDatabase(arg1) {
+  return window['go']['main']['App']['CompactDatabase'](arg1);
+}
+
 export function ComputeQSOAwardRefs(arg1) {
   return window['go']['main']['App']['ComputeQSOAwardRefs'](arg1);
 }
@@ -278,6 +314,10 @@ export function DismissAwardUpdate(arg1) {
   return window['go']['main']['App']['DismissAwardUpdate'](arg1);
 }
 
+export function DismissQSLViaRepair() {
+  return window['go']['main']['App']['DismissQSLViaRepair']();
+}
+
 export function DownloadAllReferenceLists() {
   return window['go']['main']['App']['DownloadAllReferenceLists']();
 }
@@ -314,6 +354,10 @@ export function DuplicateProfile(arg1, arg2) {
   return window['go']['main']['App']['DuplicateProfile'](arg1, arg2);
 }
 
+export function EntryBandChanged(arg1) {
+  return window['go']['main']['App']['EntryBandChanged'](arg1);
+}
+
 export function ExplainAward(arg1, arg2) {
   return window['go']['main']['App']['ExplainAward'](arg1, arg2);
 }
@@ -382,6 +426,10 @@ export function FlexApplyBandAntenna(arg1) {
   return window['go']['main']['App']['FlexApplyBandAntenna'](arg1);
 }
 
+export function FlexApplyBandPower(arg1, arg2) {
+  return window['go']['main']['App']['FlexApplyBandPower'](arg1, arg2);
+}
+
 export function FlexBackspaceCW(arg1) {
   return window['go']['main']['App']['FlexBackspaceCW'](arg1);
 }
@@ -622,10 +670,18 @@ export function FlexStopCW() {
   return window['go']['main']['App']['FlexStopCW']();
 }
 
+export function FlexTXOnBand(arg1) {
+  return window['go']['main']['App']['FlexTXOnBand'](arg1);
+}
+
 export function FlexTune(arg1) {
   return window['go']['main']['App']['FlexTune'](arg1);
 }
 
+export function FlexZoomForSpot(arg1, arg2) {
+  return window['go']['main']['App']['FlexZoomForSpot'](arg1, arg2);
+}
+
 export function GetACOMStatus() {
   return window['go']['main']['App']['GetACOMStatus']();
 }
@@ -670,8 +726,8 @@ export function GetAutostartPrograms() {
   return window['go']['main']['App']['GetAutostartPrograms']();
 }
 
-export function GetAward(arg1) {
+export function GetAward(arg1, arg2) {
-  return window['go']['main']['App']['GetAward'](arg1);
+  return window['go']['main']['App']['GetAward'](arg1, arg2);
 }
 
 export function GetAwardDefs() {
@@ -702,6 +758,14 @@ export function GetBackupSettings() {
   return window['go']['main']['App']['GetBackupSettings']();
 }
 
+export function GetBandOpenSettings() {
+  return window['go']['main']['App']['GetBandOpenSettings']();
+}
+
+export function GetBandOpenings() {
+  return window['go']['main']['App']['GetBandOpenings']();
+}
+
 export function GetCATSettings() {
   return window['go']['main']['App']['GetCATSettings']();
 }
@@ -722,6 +786,18 @@ export function GetChangelog() {
   return window['go']['main']['App']['GetChangelog']();
 }
 
+export function GetChaseNew() {
+  return window['go']['main']['App']['GetChaseNew']();
+}
+
+export function GetChaseNewGrids() {
+  return window['go']['main']['App']['GetChaseNewGrids']();
+}
+
+export function GetChaseNewSpots() {
+  return window['go']['main']['App']['GetChaseNewSpots']();
+}
+
 export function GetChatHistory(arg1) {
   return window['go']['main']['App']['GetChatHistory'](arg1);
 }
@@ -786,18 +862,50 @@ export function GetFlexBandAntennas() {
   return window['go']['main']['App']['GetFlexBandAntennas']();
 }
 
+export function GetFlexBandPower() {
+  return window['go']['main']['App']['GetFlexBandPower']();
+}
+
 export function GetFlexState() {
   return window['go']['main']['App']['GetFlexState']();
 }
 
+export function GetFlexZoom() {
+  return window['go']['main']['App']['GetFlexZoom']();
+}
+
+export function GetFolderSync() {
+  return window['go']['main']['App']['GetFolderSync']();
+}
+
+export function GetFolderSyncStatus() {
+  return window['go']['main']['App']['GetFolderSyncStatus']();
+}
+
+export function GetGridCacheStatus() {
+  return window['go']['main']['App']['GetGridCacheStatus']();
+}
+
+export function GetGridScopeSettings() {
+  return window['go']['main']['App']['GetGridScopeSettings']();
+}
+
 export function GetIcomState() {
   return window['go']['main']['App']['GetIcomState']();
 }
 
+export function GetLinkedAmps() {
+  return window['go']['main']['App']['GetLinkedAmps']();
+}
+
 export function GetListsSettings() {
   return window['go']['main']['App']['GetListsSettings']();
 }
 
+export function GetLiveOpenings() {
+  return window['go']['main']['App']['GetLiveOpenings']();
+}
+
 export function GetLiveStations() {
   return window['go']['main']['App']['GetLiveStations']();
 }
@@ -822,6 +930,10 @@ export function GetLookupSettings() {
   return window['go']['main']['App']['GetLookupSettings']();
 }
 
+export function GetMatrixColors() {
+  return window['go']['main']['App']['GetMatrixColors']();
+}
+
 export function GetMySQLSettings() {
   return window['go']['main']['App']['GetMySQLSettings']();
 }
@@ -850,6 +962,18 @@ export function GetPOTAToken() {
   return window['go']['main']['App']['GetPOTAToken']();
 }
 
+export function GetPSKReporterStatus() {
+  return window['go']['main']['App']['GetPSKReporterStatus']();
+}
+
+export function GetPSUSettings() {
+  return window['go']['main']['App']['GetPSUSettings']();
+}
+
+export function GetPSUStatus() {
+  return window['go']['main']['App']['GetPSUStatus']();
+}
+
 export function GetPendingQSOs() {
   return window['go']['main']['App']['GetPendingQSOs']();
 }
@@ -874,8 +998,16 @@ export function GetRotatorHeading() {
   return window['go']['main']['App']['GetRotatorHeading']();
 }
 
-export function GetRotatorSettings() {
+export function GetRotators() {
-  return window['go']['main']['App']['GetRotatorSettings']();
+  return window['go']['main']['App']['GetRotators']();
+}
+
+export function GetRotorPresets() {
+  return window['go']['main']['App']['GetRotorPresets']();
+}
+
+export function GetRowColors() {
+  return window['go']['main']['App']['GetRowColors']();
 }
 
 export function GetSPEStatus() {
@@ -890,6 +1022,10 @@ export function GetSecretStatus() {
   return window['go']['main']['App']['GetSecretStatus']();
 }
 
+export function GetSelfSpotSettings() {
+  return window['go']['main']['App']['GetSelfSpotSettings']();
+}
+
 export function GetSlotStats() {
   return window['go']['main']['App']['GetSlotStats']();
 }
@@ -898,6 +1034,14 @@ export function GetSolarData() {
   return window['go']['main']['App']['GetSolarData']();
 }
 
+export function GetSpotColors() {
+  return window['go']['main']['App']['GetSpotColors']();
+}
+
+export function GetSpotTTLMinutes() {
+  return window['go']['main']['App']['GetSpotTTLMinutes']();
+}
+
 export function GetStartupStatus() {
   return window['go']['main']['App']['GetStartupStatus']();
 }
@@ -918,6 +1062,10 @@ export function GetTelemetryEnabled() {
   return window['go']['main']['App']['GetTelemetryEnabled']();
 }
 
+export function GetTrackedAwards() {
+  return window['go']['main']['App']['GetTrackedAwards']();
+}
+
 export function GetTunerGeniusSettings() {
   return window['go']['main']['App']['GetTunerGeniusSettings']();
 }
@@ -938,6 +1086,14 @@ export function GetUltrabeamStatus() {
   return window['go']['main']['App']['GetUltrabeamStatus']();
 }
 
+export function GetWebPublishConfig() {
+  return window['go']['main']['App']['GetWebPublishConfig']();
+}
+
+export function GetWebPublishStatus() {
+  return window['go']['main']['App']['GetWebPublishStatus']();
+}
+
 export function GetWhatsNew() {
   return window['go']['main']['App']['GetWhatsNew']();
 }
@@ -950,10 +1106,22 @@ export function GetWinkeyerStatus() {
   return window['go']['main']['App']['GetWinkeyerStatus']();
 }
 
+export function GetWorkedCallVariants() {
+  return window['go']['main']['App']['GetWorkedCallVariants']();
+}
+
 export function GetYaesuState() {
   return window['go']['main']['App']['GetYaesuState']();
 }
 
+export function GridSquares(arg1) {
+  return window['go']['main']['App']['GridSquares'](arg1);
+}
+
+export function HaltDecodeTx(arg1, arg2) {
+  return window['go']['main']['App']['HaltDecodeTx'](arg1, arg2);
+}
+
 export function HasBuiltinReferences(arg1) {
   return window['go']['main']['App']['HasBuiltinReferences'](arg1);
 }
@@ -1146,6 +1314,18 @@ export function InspectAwardImport() {
   return window['go']['main']['App']['InspectAwardImport']();
 }
 
+export function IsNewUSCounty(arg1, arg2) {
+  return window['go']['main']['App']['IsNewUSCounty'](arg1, arg2);
+}
+
+export function KenwoodSendCW(arg1) {
+  return window['go']['main']['App']['KenwoodSendCW'](arg1);
+}
+
+export function KenwoodStopCW() {
+  return window['go']['main']['App']['KenwoodStopCW']();
+}
+
 export function LaunchAutostartProgram(arg1) {
   return window['go']['main']['App']['LaunchAutostartProgram'](arg1);
 }
@@ -1230,12 +1410,16 @@ export function LogUIError(arg1, arg2, arg3) {
   return window['go']['main']['App']['LogUIError'](arg1, arg2, arg3);
 }
 
-export function LookupCallsign(arg1) {
+export function LookupCallsign(arg1, arg2) {
-  return window['go']['main']['App']['LookupCallsign'](arg1);
+  return window['go']['main']['App']['LookupCallsign'](arg1, arg2);
 }
 
-export function LookupCallsignFresh(arg1) {
+export function LookupCallsignFresh(arg1, arg2) {
-  return window['go']['main']['App']['LookupCallsignFresh'](arg1);
+  return window['go']['main']['App']['LookupCallsignFresh'](arg1, arg2);
+}
+
+export function MotorNudgeKHz(arg1) {
+  return window['go']['main']['App']['MotorNudgeKHz'](arg1);
 }
 
 export function MotorReadElements() {
@@ -1246,6 +1430,10 @@ export function MotorSetElement(arg1, arg2) {
   return window['go']['main']['App']['MotorSetElement'](arg1, arg2);
 }
 
+export function MotorTuneKHz(arg1) {
+  return window['go']['main']['App']['MotorTuneKHz'](arg1);
+}
+
 export function MoveDatabase(arg1) {
   return window['go']['main']['App']['MoveDatabase'](arg1);
 }
@@ -1346,6 +1534,14 @@ export function PGXLSetOperate(arg1) {
   return window['go']['main']['App']['PGXLSetOperate'](arg1);
 }
 
+export function PTTHotkeyDown() {
+  return window['go']['main']['App']['PTTHotkeyDown']();
+}
+
+export function PTTHotkeyUp() {
+  return window['go']['main']['App']['PTTHotkeyUp']();
+}
+
 export function PickADIFMonitorFile() {
   return window['go']['main']['App']['PickADIFMonitorFile']();
 }
@@ -1358,6 +1554,10 @@ export function PickBackupFolder() {
   return window['go']['main']['App']['PickBackupFolder']();
 }
 
+export function PickFolderSyncFolder() {
+  return window['go']['main']['App']['PickFolderSyncFolder']();
+}
+
 export function PickOpenDatabase() {
   return window['go']['main']['App']['PickOpenDatabase']();
 }
@@ -1370,6 +1570,14 @@ export function PopulateBuiltinReferences(arg1) {
   return window['go']['main']['App']['PopulateBuiltinReferences'](arg1);
 }
 
+export function PublishLogNow() {
+  return window['go']['main']['App']['PublishLogNow']();
+}
+
+export function QSLCopyTemplateToActiveProfile(arg1) {
+  return window['go']['main']['App']['QSLCopyTemplateToActiveProfile'](arg1);
+}
+
 export function QSLDefaultTemplateID() {
   return window['go']['main']['App']['QSLDefaultTemplateID']();
 }
@@ -1398,6 +1606,10 @@ export function QSLGetTemplate(arg1) {
   return window['go']['main']['App']['QSLGetTemplate'](arg1);
 }
 
+export function QSLListOtherProfileTemplates() {
+  return window['go']['main']['App']['QSLListOtherProfileTemplates']();
+}
+
 export function QSLListTemplates() {
   return window['go']['main']['App']['QSLListTemplates']();
 }
@@ -1438,6 +1650,10 @@ export function QSLStylePresets() {
   return window['go']['main']['App']['QSLStylePresets']();
 }
 
+export function QSLViaRepairStatus() {
+  return window['go']['main']['App']['QSLViaRepairStatus']();
+}
+
 export function QSOAudioBegin() {
   return window['go']['main']['App']['QSOAudioBegin']();
 }
@@ -1478,10 +1694,18 @@ export function QuitApp() {
   return window['go']['main']['App']['QuitApp']();
 }
 
+export function RDADatabaseCount() {
+  return window['go']['main']['App']['RDADatabaseCount']();
+}
+
 export function RecomputeAllAwardRefs() {
   return window['go']['main']['App']['RecomputeAllAwardRefs']();
 }
 
+export function RecomputeAwardRefsForCode(arg1) {
+  return window['go']['main']['App']['RecomputeAwardRefsForCode'](arg1);
+}
+
 export function RefreshCtyDat() {
   return window['go']['main']['App']['RefreshCtyDat']();
 }
@@ -1502,6 +1726,10 @@ export function RemovePassphrase(arg1) {
   return window['go']['main']['App']['RemovePassphrase'](arg1);
 }
 
+export function RenameAwardReference(arg1, arg2, arg3) {
+  return window['go']['main']['App']['RenameAwardReference'](arg1, arg2, arg3);
+}
+
 export function RenameDatabase(arg1) {
   return window['go']['main']['App']['RenameDatabase'](arg1);
 }
@@ -1514,6 +1742,10 @@ export function RenderEQSL(arg1, arg2) {
   return window['go']['main']['App']['RenderEQSL'](arg1, arg2);
 }
 
+export function RepairQSLVia() {
+  return window['go']['main']['App']['RepairQSLVia']();
+}
+
 export function ReplaceAwardReferences(arg1, arg2) {
   return window['go']['main']['App']['ReplaceAwardReferences'](arg1, arg2);
 }
@@ -1534,6 +1766,14 @@ export function ResetDatabaseToDefault() {
   return window['go']['main']['App']['ResetDatabaseToDefault']();
 }
 
+export function ResetRotorPresets() {
+  return window['go']['main']['App']['ResetRotorPresets']();
+}
+
+export function ResetSpotColors() {
+  return window['go']['main']['App']['ResetSpotColors']();
+}
+
 export function RestartApp() {
   return window['go']['main']['App']['RestartApp']();
 }
@@ -1554,6 +1794,10 @@ export function RotatorGoTo(arg1, arg2) {
   return window['go']['main']['App']['RotatorGoTo'](arg1, arg2);
 }
 
+export function RotatorGoToPath(arg1, arg2, arg3) {
+  return window['go']['main']['App']['RotatorGoToPath'](arg1, arg2, arg3);
+}
+
 export function RotatorPark() {
   return window['go']['main']['App']['RotatorPark']();
 }
@@ -1622,6 +1866,10 @@ export function SaveBackupSettings(arg1) {
   return window['go']['main']['App']['SaveBackupSettings'](arg1);
 }
 
+export function SaveBandOpenSettings(arg1) {
+  return window['go']['main']['App']['SaveBandOpenSettings'](arg1);
+}
+
 export function SaveCATSettings(arg1) {
   return window['go']['main']['App']['SaveCATSettings'](arg1);
 }
@@ -1646,6 +1894,22 @@ export function SaveFlexBandAntennas(arg1) {
   return window['go']['main']['App']['SaveFlexBandAntennas'](arg1);
 }
 
+export function SaveFlexBandPower(arg1) {
+  return window['go']['main']['App']['SaveFlexBandPower'](arg1);
+}
+
+export function SaveFlexZoom(arg1) {
+  return window['go']['main']['App']['SaveFlexZoom'](arg1);
+}
+
+export function SaveFolderSync(arg1) {
+  return window['go']['main']['App']['SaveFolderSync'](arg1);
+}
+
+export function SaveGridScopeSettings(arg1) {
+  return window['go']['main']['App']['SaveGridScopeSettings'](arg1);
+}
+
 export function SaveListsSettings(arg1) {
   return window['go']['main']['App']['SaveListsSettings'](arg1);
 }
@@ -1654,6 +1918,10 @@ export function SaveLookupSettings(arg1) {
   return window['go']['main']['App']['SaveLookupSettings'](arg1);
 }
 
+export function SaveMatrixColors(arg1) {
+  return window['go']['main']['App']['SaveMatrixColors'](arg1);
+}
+
 export function SaveMySQLSettings(arg1) {
   return window['go']['main']['App']['SaveMySQLSettings'](arg1);
 }
@@ -1674,6 +1942,10 @@ export function SavePOTAToken(arg1) {
   return window['go']['main']['App']['SavePOTAToken'](arg1);
 }
 
+export function SavePSUSettings(arg1) {
+  return window['go']['main']['App']['SavePSUSettings'](arg1);
+}
+
 export function SaveProfile(arg1) {
   return window['go']['main']['App']['SaveProfile'](arg1);
 }
@@ -1686,8 +1958,24 @@ export function SaveRelayAuto(arg1) {
   return window['go']['main']['App']['SaveRelayAuto'](arg1);
 }
 
-export function SaveRotatorSettings(arg1) {
+export function SaveRotators(arg1) {
-  return window['go']['main']['App']['SaveRotatorSettings'](arg1);
+  return window['go']['main']['App']['SaveRotators'](arg1);
+}
+
+export function SaveRotorPresets(arg1) {
+  return window['go']['main']['App']['SaveRotorPresets'](arg1);
+}
+
+export function SaveRowColors(arg1) {
+  return window['go']['main']['App']['SaveRowColors'](arg1);
+}
+
+export function SaveSelfSpotSettings(arg1) {
+  return window['go']['main']['App']['SaveSelfSpotSettings'](arg1);
+}
+
+export function SaveSpotColors(arg1) {
+  return window['go']['main']['App']['SaveSpotColors'](arg1);
 }
 
 export function SaveStationDevices(arg1) {
@@ -1698,6 +1986,10 @@ export function SaveStationSettings(arg1) {
   return window['go']['main']['App']['SaveStationSettings'](arg1);
 }
 
+export function SaveTrackedAwards(arg1) {
+  return window['go']['main']['App']['SaveTrackedAwards'](arg1);
+}
+
 export function SaveTunerGeniusSettings(arg1) {
   return window['go']['main']['App']['SaveTunerGeniusSettings'](arg1);
 }
@@ -1710,6 +2002,10 @@ export function SaveUltrabeamSettings(arg1) {
   return window['go']['main']['App']['SaveUltrabeamSettings'](arg1);
 }
 
+export function SaveWebPublishConfig(arg1) {
+  return window['go']['main']['App']['SaveWebPublishConfig'](arg1);
+}
+
 export function SaveWinkeyerSettings(arg1) {
   return window['go']['main']['App']['SaveWinkeyerSettings'](arg1);
 }
@@ -1734,6 +2030,10 @@ export function SendClusterSpot(arg1, arg2, arg3) {
   return window['go']['main']['App']['SendClusterSpot'](arg1, arg2, arg3);
 }
 
+export function SendDecodeFreeText(arg1, arg2, arg3) {
+  return window['go']['main']['App']['SendDecodeFreeText'](arg1, arg2, arg3);
+}
+
 export function SendEQSL(arg1, arg2, arg3) {
   return window['go']['main']['App']['SendEQSL'](arg1, arg2, arg3);
 }
@@ -1746,6 +2046,10 @@ export function SendQSORecordingEmail(arg1) {
   return window['go']['main']['App']['SendQSORecordingEmail'](arg1);
 }
 
+export function SetActiveRotor(arg1) {
+  return window['go']['main']['App']['SetActiveRotor'](arg1);
+}
+
 export function SetAlertEmailTo(arg1) {
   return window['go']['main']['App']['SetAlertEmailTo'](arg1);
 }
@@ -1766,6 +2070,14 @@ export function SetCWDecoderPitch(arg1) {
   return window['go']['main']['App']['SetCWDecoderPitch'](arg1);
 }
 
+export function SetChaseNew(arg1) {
+  return window['go']['main']['App']['SetChaseNew'](arg1);
+}
+
+export function SetChaseNewGrids(arg1) {
+  return window['go']['main']['App']['SetChaseNewGrids'](arg1);
+}
+
 export function SetClublogCtyEnabled(arg1) {
   return window['go']['main']['App']['SetClublogCtyEnabled'](arg1);
 }
@@ -1778,6 +2090,10 @@ export function SetClusterAutoConnect(arg1) {
   return window['go']['main']['App']['SetClusterAutoConnect'](arg1);
 }
 
+export function SetCompactHeight(arg1) {
+  return window['go']['main']['App']['SetCompactHeight'](arg1);
+}
+
 export function SetCompactMode(arg1) {
   return window['go']['main']['App']['SetCompactMode'](arg1);
 }
@@ -1786,6 +2102,26 @@ export function SetDVKLabel(arg1, arg2) {
   return window['go']['main']['App']['SetDVKLabel'](arg1, arg2);
 }
 
+export function SetKenwoodKeySpeed(arg1) {
+  return window['go']['main']['App']['SetKenwoodKeySpeed'](arg1);
+}
+
+export function SetLinkedAmps(arg1) {
+  return window['go']['main']['App']['SetLinkedAmps'](arg1);
+}
+
+export function SetMotorFollow(arg1, arg2, arg3) {
+  return window['go']['main']['App']['SetMotorFollow'](arg1, arg2, arg3);
+}
+
+export function SetOpsLogQSLReceived(arg1, arg2) {
+  return window['go']['main']['App']['SetOpsLogQSLReceived'](arg1, arg2);
+}
+
+export function SetPSUOutput(arg1) {
+  return window['go']['main']['App']['SetPSUOutput'](arg1);
+}
+
 export function SetPassphrase(arg1) {
   return window['go']['main']['App']['SetPassphrase'](arg1);
 }
@@ -1794,6 +2130,10 @@ export function SetScpEnabled(arg1) {
   return window['go']['main']['App']['SetScpEnabled'](arg1);
 }
 
+export function SetSpotTTLMinutes(arg1) {
+  return window['go']['main']['App']['SetSpotTTLMinutes'](arg1);
+}
+
 export function SetTelemetryEnabled(arg1) {
   return window['go']['main']['App']['SetTelemetryEnabled'](arg1);
 }
@@ -1810,6 +2150,10 @@ export function SetWinkeyerTrace(arg1) {
   return window['go']['main']['App']['SetWinkeyerTrace'](arg1);
 }
 
+export function SetWorkedCallVariants(arg1) {
+  return window['go']['main']['App']['SetWorkedCallVariants'](arg1);
+}
+
 export function SetYaesuAFGain(arg1) {
   return window['go']['main']['App']['SetYaesuAFGain'](arg1);
 }
@@ -1902,10 +2246,18 @@ export function SwitchCATRig(arg1) {
   return window['go']['main']['App']['SwitchCATRig'](arg1);
 }
 
+export function SyncFolderNow() {
+  return window['go']['main']['App']['SyncFolderNow']();
+}
+
 export function SyncPOTAHunterLog(arg1, arg2) {
   return window['go']['main']['App']['SyncPOTAHunterLog'](arg1, arg2);
 }
 
+export function TailLogFile(arg1) {
+  return window['go']['main']['App']['TailLogFile'](arg1);
+}
+
 export function TestCloudlogUpload() {
   return window['go']['main']['App']['TestCloudlogUpload']();
 }
@@ -1946,8 +2298,8 @@ export function TestQRZUpload() {
   return window['go']['main']['App']['TestQRZUpload']();
 }
 
-export function TestRotator(arg1) {
+export function TestRotatorDevice(arg1, arg2) {
-  return window['go']['main']['App']['TestRotator'](arg1);
+  return window['go']['main']['App']['TestRotatorDevice'](arg1, arg2);
 }
 
 export function TestStationDevice(arg1) {
@@ -1958,6 +2310,10 @@ export function TestUltrabeam(arg1) {
   return window['go']['main']['App']['TestUltrabeam'](arg1);
 }
 
+export function TestWebPublishFTP(arg1) {
+  return window['go']['main']['App']['TestWebPublishFTP'](arg1);
+}
+
 export function TuneYaesuATU() {
   return window['go']['main']['App']['TuneYaesuATU']();
 }
@@ -2002,6 +2358,10 @@ export function UpdateQSO(arg1) {
   return window['go']['main']['App']['UpdateQSO'](arg1);
 }
 
+export function UpdateQSOsCountyFromULS(arg1) {
+  return window['go']['main']['App']['UpdateQSOsCountyFromULS'](arg1);
+}
+
 export function UpdateQSOsFromClublog(arg1) {
   return window['go']['main']['App']['UpdateQSOsFromClublog'](arg1);
 }
@@ -2022,6 +2382,10 @@ export function UploadQSOsManual(arg1, arg2) {
   return window['go']['main']['App']['UploadQSOsManual'](arg1, arg2);
 }
 
+export function WebPublishColumns() {
+  return window['go']['main']['App']['WebPublishColumns']();
+}
+
 export function WinkeyerBackspace() {
   return window['go']['main']['App']['WinkeyerBackspace']();
 }

gate_coverage_test.go

@@ -0,0 +1,64 @@
+package main
+
+import (
+	"os"
+	"strings"
+	"testing"
+)
+
+// The build gate is only as good as the moments it runs at.
+//
+// It used to run at startup alone, on the profile active then — and a fresh
+// install has NO callsign at that point. The operator typed theirs afterwards,
+// so a denied call ran for the whole session and reached the telemetry, which
+// reads the very same field. Every place that can make a denied callsign the
+// ACTIVE one has to re-ask.
+func TestCallGateRunsWhereverTheActiveCallsignChanges(t *testing.T) {
+	src, err := os.ReadFile("app.go")
+	if err != nil {
+		t.Fatal(err)
+	}
+	for _, fn := range []string{
+		"func (a *App) startup(ctx context.Context) {",                 // launch
+		"func (a *App) SaveStationSettings(s StationSettings) error {", // the call is entered here
+		"func (a *App) SaveProfile(p profile.Profile) (profile.Profile, error) {",
+		"func (a *App) ActivateProfile(id int64) error {",
+	} {
+		body := funcBody(t, string(src), fn)
+		if !strings.Contains(body, "enforceCallGate(") {
+			t.Errorf("%s can change the active callsign but never re-checks the gate", fn)
+		}
+	}
+}
+
+// The hashes are the whole mechanism: a truncated or re-cased entry silently
+// matches nothing, and nothing in the running program would ever say so.
+func TestDeniedCallHashesAreWellFormed(t *testing.T) {
+	if len(deniedCallHashes) == 0 {
+		t.Fatal("the deny list is empty — the gate has stopped gating")
+	}
+	for h := range deniedCallHashes {
+		if len(h) != 64 {
+			t.Errorf("hash %q is %d chars, want 64", h, len(h))
+		}
+		if h != strings.ToLower(h) {
+			t.Errorf("hash %q is not lower-case, so it can never match", h)
+		}
+	}
+}
+
+// A slashed call must reduce to the real one, or /P is a way round the gate.
+func TestDenyBaseCall(t *testing.T) {
+	for in, want := range map[string]string{
+		"f4xyz":    "F4XYZ",
+		" F4XYZ ":  "F4XYZ",
+		"F4XYZ/P":  "F4XYZ",
+		"TM/F4XYZ": "F4XYZ",
+		"F4XYZ/MM": "F4XYZ",
+		"":         "",
+	} {
+		if got := denyBaseCall(in); got != want {
+			t.Errorf("denyBaseCall(%q) = %q, want %q", in, got, want)
+		}
+	}
+}

go.mod

@@ -4,14 +4,16 @@ go 1.25.0
 
 require (
 	github.com/braheezy/shine-mp3 v0.1.0
+	github.com/eclipse/paho.mqtt.golang v1.5.1
 	github.com/go-ole/go-ole v1.3.0
 	github.com/go-sql-driver/mysql v1.10.0
 	github.com/gorilla/websocket v1.5.3
+	github.com/jlaffaye/ftp v0.2.2
 	github.com/moutend/go-wca v0.3.0
 	github.com/wailsapp/wails/v2 v2.11.0
 	github.com/wneessen/go-mail v0.7.3
 	go.bug.st/serial v1.7.1
-	golang.org/x/net v0.35.0
+	golang.org/x/net v0.44.0
 	golang.org/x/sys v0.45.0
 	golang.org/x/text v0.37.0
 	modernc.org/sqlite v1.50.1
@@ -43,7 +45,8 @@ require (
 	github.com/valyala/fasttemplate v1.2.2 // indirect
 	github.com/wailsapp/go-webview2 v1.0.22 // indirect
 	github.com/wailsapp/mimetype v1.4.1 // indirect
-	golang.org/x/crypto v0.33.0 // indirect
+	golang.org/x/crypto v0.42.0 // indirect
+	golang.org/x/sync v0.20.0 // indirect
 	modernc.org/libc v1.72.3 // indirect
 	modernc.org/mathutil v1.7.1 // indirect
 	modernc.org/memory v1.11.0 // indirect

go.sum

@@ -8,6 +8,8 @@ github.com/davecgh/go-spew v1.1.1 h1:vj9j/u1bqnvCEfJOwUhtlOARqs3+rkHYY13jYWTU97c
 github.com/davecgh/go-spew v1.1.1/go.mod h1:J7Y8YcW2NihsgmVo/mv3lAwl/skON4iLHjSsI+c5H38=
 github.com/dustin/go-humanize v1.0.1 h1:GzkhY7T5VNhEkwH0PVJgjz+fX1rhBrR7pRT3mDkpeCY=
 github.com/dustin/go-humanize v1.0.1/go.mod h1:Mu1zIs6XwVuF/gI1OepvI0qD18qycQx+mFykh5fBlto=
+github.com/eclipse/paho.mqtt.golang v1.5.1 h1:/VSOv3oDLlpqR2Epjn1Q7b2bSTplJIeV2ISgCl2W7nE=
+github.com/eclipse/paho.mqtt.golang v1.5.1/go.mod h1:1/yJCneuyOoCOzKSsOTUc0AJfpsItBGWvYpBLimhArU=
 github.com/go-ole/go-ole v1.2.6/go.mod h1:pprOEPIfldk/42T2oK7lQ4v4JSDwmV0As9GaiUsvbm0=
 github.com/go-ole/go-ole v1.3.0 h1:Dt6ye7+vXGIKZ7Xtk4s6/xVdGDQynvom7xCFEdWr6uE=
 github.com/go-ole/go-ole v1.3.0/go.mod h1:5LS6F96DhAwUc7C+1HLexzMXY1xGRSryjyPPKW6zv78=
@@ -25,6 +27,8 @@ github.com/hashicorp/golang-lru/v2 v2.0.7 h1:a+bsQ5rvGLjzHuww6tVxozPZFVghXaHOwFs
 github.com/hashicorp/golang-lru/v2 v2.0.7/go.mod h1:QeFd9opnmA6QUJc5vARoKUSoFhyfM2/ZepoAG6RGpeM=
 github.com/jchv/go-winloader v0.0.0-20210711035445-715c2860da7e h1:Q3+PugElBCf4PFpxhErSzU3/PY5sFL5Z6rfv4AbGAck=
 github.com/jchv/go-winloader v0.0.0-20210711035445-715c2860da7e/go.mod h1:alcuEEnZsY1WQsagKhZDsoPCRoOijYqhZvPwLG0kzVs=
+github.com/jlaffaye/ftp v0.2.2 h1:JwjrXCAIjN9ZYrF1/8qlmHFXDteh9MHYaiEIh/Oqtd8=
+github.com/jlaffaye/ftp v0.2.2/go.mod h1:zuLAKdqFqFvNgkCrH0SC7K1XyUiydS7BFCmmoHUWWg0=
 github.com/labstack/echo/v4 v4.13.3 h1:pwhpCPrTl5qry5HRdM5FwdXnhXSLSY+WE+YQSeCaafY=
 github.com/labstack/echo/v4 v4.13.3/go.mod h1:o90YNEeQWjDozo584l7AwhJMHN0bOC4tAfg+Xox9q5g=
 github.com/labstack/gommon v0.4.2 h1:F8qTUNXgG1+6WQmqoUWnz8WiEU60mXVVw0P4ht1WRA0=
@@ -64,8 +68,8 @@ github.com/rivo/uniseg v0.4.7 h1:WUdvkW8uEhrYfLC4ZzdpI2ztxP1I582+49Oc5Mq64VQ=
 github.com/rivo/uniseg v0.4.7/go.mod h1:FN3SvrM+Zdj16jyLfmOkMNblXMcoc8DfTHruCPUcx88=
 github.com/samber/lo v1.49.1 h1:4BIFyVfuQSEpluc7Fua+j1NolZHiEHEpaSEKdsH0tew=
 github.com/samber/lo v1.49.1/go.mod h1:dO6KHFzUKXgP8LDhU0oI8d2hekjXnGOu0DB8Jecxd6o=
-github.com/stretchr/testify v1.10.0 h1:Xv5erBjTwe/5IxqUQTdXv5kgmIvbHo3QQyRwhJsOfJA=
+github.com/stretchr/testify v1.11.1 h1:7s2iGBzp5EwR7/aIZr8ao5+dra3wiQyKjjFuvgVKu7U=
-github.com/stretchr/testify v1.10.0/go.mod h1:r2ic/lqez/lEtzL7wO/rwa5dbSLXVDPFyf8C91i36aY=
+github.com/stretchr/testify v1.11.1/go.mod h1:wZwfW3scLgRK+23gO65QZefKpKQRnfz6sD981Nm4B6U=
 github.com/tkrajina/go-reflector v0.5.8 h1:yPADHrwmUbMq4RGEyaOUpz2H90sRsETNVpjzo3DLVQQ=
 github.com/tkrajina/go-reflector v0.5.8/go.mod h1:ECbqLgccecY5kPmPmXg1MrHW585yMcDkVl6IvJe64T4=
 github.com/valyala/bytebufferpool v1.0.0 h1:GqA5TC/0021Y/b9FG4Oi9Mr3q7XYx6KllzawFIhcdPw=
@@ -82,13 +86,13 @@ github.com/wneessen/go-mail v0.7.3 h1:g3DravXC5SMlVdboFrQA8Jx95A8sOzoBeS5F+vzNRK
 github.com/wneessen/go-mail v0.7.3/go.mod h1:QGhBX0yNbc1J+Mkjcu7z2rpj4B4l+BmDY8gYznPC9sk=
 go.bug.st/serial v1.7.1 h1:5aP8wYL0UjEYOVs3oPAGscjaSfRQLHtCvBFXNN/rwtc=
 go.bug.st/serial v1.7.1/go.mod h1:d0MmS16Qt9b1m06yoYRNUXhRRTJV5Qg2S5EKqQtnayQ=
-golang.org/x/crypto v0.33.0 h1:IOBPskki6Lysi0lo9qQvbxiQ+FvsCC/YWOecCHAixus=
+golang.org/x/crypto v0.42.0 h1:chiH31gIWm57EkTXpwnqf8qeuMUi0yekh6mT2AvFlqI=
-golang.org/x/crypto v0.33.0/go.mod h1:bVdXmD7IV/4GdElGPozy6U7lWdRXA4qyRVGJV57uQ5M=
+golang.org/x/crypto v0.42.0/go.mod h1:4+rDnOTJhQCx2q7/j6rAN5XDw8kPjeaXEUR2eL94ix8=
 golang.org/x/mod v0.35.0 h1:Ww1D637e6Pg+Zb2KrWfHQUnH2dQRLBQyAtpr/haaJeM=
 golang.org/x/mod v0.35.0/go.mod h1:+GwiRhIInF8wPm+4AoT6L0FA1QWAad3OMdTRx4tFYlU=
 golang.org/x/net v0.0.0-20210505024714-0287a6fb4125/go.mod h1:9nx3DQGgdP8bBQD5qxJ1jj9UTztislL4KSBs9R2vV5Y=
-golang.org/x/net v0.35.0 h1:T5GQRQb2y08kTAByq9L4/bz8cipCdA8FbRTXewonqY8=
+golang.org/x/net v0.44.0 h1:evd8IRDyfNBMBTTY5XRF1vaZlD+EmWx6x8PkhR04H/I=
-golang.org/x/net v0.35.0/go.mod h1:EglIi67kWsHKlRzzVMUD93VMSWGFOMSZgxFjparz1Qk=
+golang.org/x/net v0.44.0/go.mod h1:ECOoLqd5U3Lhyeyo/QDCEVQ4sNgYsqvCZ722XogGieY=
 golang.org/x/sync v0.20.0 h1:e0PTpb7pjO8GAtTs2dQ6jYa5BWYlMuX047Dco/pItO4=
 golang.org/x/sync v0.20.0/go.mod h1:9xrNwdLfx4jkKbNva9FpL6vEN7evnE43NNNJQ2LF3+0=
 golang.org/x/sys v0.0.0-20190916202348-b4ddaad3f8a3/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=

gridscope.go

@@ -0,0 +1,187 @@
+package main
+
+import (
+	"strings"
+
+	"hamlog/internal/award"
+	"hamlog/internal/qso"
+)
+
+// New-grid scoping: WHICH prior contacts count as "I already have this square".
+//
+// The question has no single right answer, which is why it is a setting rather
+// than a rule. A VUCC chaser counts a square per band; someone filling in a
+// wall map counts it once. GridTracker offers the same six combinations, and an
+// operator running both alongside each other needs them to agree — a square
+// "wanted" in one and not the other is a bug report every time.
+const (
+	keyGridScope = "grid.scope" // band+mode combination — see gridScopes
+	keyGridHunt  = "grid.hunt"  // "new" | "new_unconfirmed"
+)
+
+// gridScope is one band × mode combination.
+type gridScope struct {
+	Key string `json:"key"`
+	// Band is true when the square has to have been worked on THIS band. False
+	// is GridTracker's "Mix Bands": any band counts.
+	Band bool `json:"band"`
+	// Mode is how much of the mode matters:
+	//   "digi" — any digital mode at all
+	//   "ftx"  — any of the FT family (FT8/FT4/FT2)
+	//   "mode" — this exact mode and no other
+	Mode string `json:"mode"`
+}
+
+var gridScopes = []gridScope{
+	{Key: "band_digi", Band: true, Mode: "digi"},
+	{Key: "band_mode", Band: true, Mode: "mode"},
+	{Key: "band_ftx", Band: true, Mode: "ftx"},
+	{Key: "mix_digi", Band: false, Mode: "digi"},
+	{Key: "mix_mode", Band: false, Mode: "mode"},
+	{Key: "mix_ftx", Band: false, Mode: "ftx"},
+}
+
+// defaultGridScope matches what the panel showed before the setting existed:
+// any band, any digital mode. Changing an operator's badges on upgrade is worse
+// than offering them a choice they have not made yet.
+const defaultGridScope = "mix_digi"
+
+func lookupGridScope(key string) gridScope {
+	for _, s := range gridScopes {
+		if s.Key == key {
+			return s
+		}
+	}
+	for _, s := range gridScopes {
+		if s.Key == defaultGridScope {
+			return s
+		}
+	}
+	return gridScopes[0]
+}
+
+// ftxModes is the FT family, which is a narrower thing than "digital": an
+// operator chasing squares on FT8 does not count the RTTY contest contact, and
+// GridTracker draws the same line.
+var ftxModes = map[string]bool{"FT8": true, "FT4": true, "FT2": true}
+
+// gridClassesOf lists every bucket one logged mode belongs to. A single FT8
+// contact counts under its own name, under FTx and under digital — the scopes
+// overlap by construction, so the index stores all three and the lookup picks.
+func gridClassesOf(mode string) []string {
+	m := strings.ToUpper(strings.TrimSpace(mode))
+	if m == "" {
+		return nil
+	}
+	out := []string{"m:" + m}
+	if ftxModes[m] {
+		out = append(out, "ftx")
+	}
+	if award.ModeClass(m) == "DIGI" {
+		out = append(out, "digi")
+	}
+	return out
+}
+
+// gridClassFor turns the scope plus the mode being heard into the one class to
+// look up. Empty means "this scope cannot judge this mode" — a phone contact
+// under an FTx scope — and the caller then flags nothing rather than guessing.
+func gridClassFor(s gridScope, mode string) string {
+	m := strings.ToUpper(strings.TrimSpace(mode))
+	if m == "" {
+		return ""
+	}
+	switch s.Mode {
+	case "mode":
+		return "m:" + m
+	case "ftx":
+		if ftxModes[m] {
+			return "ftx"
+		}
+		return ""
+	default: // digi
+		if award.ModeClass(m) == "DIGI" {
+			return "digi"
+		}
+		return ""
+	}
+}
+
+// GridScopeSettings is the panel's shape.
+type GridScopeSettings struct {
+	Scope string `json:"scope"`
+	Hunt  string `json:"hunt"`
+	// Scopes is the list the UI renders, so it cannot drift from the one the
+	// lookup honours.
+	Scopes []gridScope `json:"scopes"`
+}
+
+func (a *App) GetGridScopeSettings() GridScopeSettings {
+	return GridScopeSettings{
+		Scope:  lookupGridScope(a.settingOr(keyGridScope, "")).Key,
+		Hunt:   gridHunt(a.settingOr(keyGridHunt, "")),
+		Scopes: gridScopes,
+	}
+}
+
+// gridHunt normalises the hunting mode. "new" is never-worked; "new_unconfirmed"
+// also chases a square worked but not yet confirmed — the same square is still
+// missing from the award either way.
+func gridHunt(v string) string {
+	if strings.TrimSpace(v) == "new_unconfirmed" {
+		return "new_unconfirmed"
+	}
+	return "new"
+}
+
+func (a *App) SaveGridScopeSettings(s GridScopeSettings) error {
+	a.setSetting(keyGridScope, lookupGridScope(s.Scope).Key)
+	a.setSetting(keyGridHunt, gridHunt(s.Hunt))
+	// The worked-grid index is built under these rules, so it is now stale.
+	a.clusterStatusMu.Lock()
+	a.clusterStatusIdx = nil
+	a.clusterStatusMu.Unlock()
+	return nil
+}
+
+// Grid states a heard square can be in, from the operator's point of view.
+//
+// "wanted" is not one state but two, and they call for different decisions: a
+// square never worked is a QSO to make, one worked and not yet confirmed is a
+// QSL to chase. Reporting both as plain NEW GRID — which is what this did when
+// the unconfirmed hunt was added — leaves an operator staring at a badge on a
+// station the log plainly says they worked an hour ago.
+const (
+	gridStateNew    = "new"    // never worked under this scope
+	gridStateUnconf = "unconf" // worked under this scope, not yet confirmed
+)
+
+// gridStateFor classifies one heard square. "" means nothing to chase: already
+// confirmed, or a mode this scope cannot judge.
+//
+// band is where it was heard and mode what it was heard in — the SCOPE decides
+// whether either is allowed to matter.
+func gridStateFor(idx map[string]bool, s gridScope, hunt, grid, band, mode string) string {
+	cls := gridClassFor(s, mode)
+	if cls == "" || len(grid) < 4 {
+		return ""
+	}
+	key := qso.GridKey(strings.ToUpper(grid[:4]), "", cls)
+	if s.Band {
+		key = qso.GridKey(strings.ToUpper(grid[:4]), band, cls)
+	}
+	confirmed, worked := idx[key]
+	switch {
+	case !worked:
+		return gridStateNew
+	case !confirmed && hunt == "new_unconfirmed":
+		return gridStateUnconf
+	default:
+		return ""
+	}
+}
+
+// gridIsWanted is gridStateFor reduced to the yes/no the filters need.
+func gridIsWanted(idx map[string]bool, s gridScope, hunt, grid, band, mode string) bool {
+	return gridStateFor(idx, s, hunt, grid, band, mode) != ""
+}

gridscope_test.go

@@ -0,0 +1,126 @@
+package main
+
+import (
+	"testing"
+
+	"hamlog/internal/qso"
+)
+
+// idx builds a worked-grid index the way GridWorkedIndex does, so the test
+// exercises the real key shape rather than a convenient one.
+func idx(entries ...struct {
+	grid, band, mode string
+	confirmed        bool
+}) map[string]bool {
+	m := map[string]bool{}
+	for _, e := range entries {
+		for _, cls := range gridClassesOf(e.mode) {
+			for _, k := range []string{qso.GridKey(e.grid, e.band, cls), qso.GridKey(e.grid, "", cls)} {
+				m[k] = m[k] || e.confirmed
+			}
+		}
+	}
+	return m
+}
+
+type entry = struct {
+	grid, band, mode string
+	confirmed        bool
+}
+
+// The six scopes are six different questions, and the whole point of offering
+// them is that the same square answers differently.
+func TestGridScopes(t *testing.T) {
+	// JN36 worked once: 20 m, FT8, not confirmed.
+	i := idx(entry{"JN36", "20m", "FT8", false})
+
+	for _, tc := range []struct {
+		scope string
+		band  string
+		mode  string
+		want  bool
+		why   string
+	}{
+		{"band_ftx", "20m", "FT8", false, "same band, same family — already mine"},
+		{"band_ftx", "15m", "FT8", true, "another band, and the scope counts bands"},
+		{"mix_ftx", "15m", "FT8", false, "another band, but this scope does not care"},
+		{"band_mode", "20m", "FT4", true, "same band, but FT4 is not FT8 under an exact-mode scope"},
+		{"band_ftx", "20m", "FT4", false, "same band, and FT4 is in the same FT family"},
+		{"band_digi", "20m", "RTTY", false, "digital counts every digital mode"},
+		{"band_ftx", "20m", "RTTY", false, "RTTY is outside an FTx scope — it is not evidence either way, so nothing is flagged"},
+		{"mix_digi", "15m", "FT4", false, "the widest scope: worked anywhere, any digital"},
+	} {
+		got := gridIsWanted(i, lookupGridScope(tc.scope), "new", "JN36", tc.band, tc.mode)
+		if got != tc.want {
+			t.Errorf("scope %s, %s %s → wanted=%v, want %v — %s", tc.scope, tc.band, tc.mode, got, tc.want, tc.why)
+		}
+	}
+}
+
+// "New + unconfirmed" chases a square that is worked but not yet confirmed: it
+// is still missing from the award, which is the only sense in which it is done.
+func TestGridHuntUnconfirmed(t *testing.T) {
+	unconf := idx(entry{"JN36", "20m", "FT8", false})
+	conf := idx(entry{"IO91", "20m", "FT8", true})
+
+	if gridIsWanted(unconf, lookupGridScope("band_ftx"), "new", "JN36", "20m", "FT8") {
+		t.Error("worked-but-unconfirmed must NOT be wanted when hunting only what is new")
+	}
+	if !gridIsWanted(unconf, lookupGridScope("band_ftx"), "new_unconfirmed", "JN36", "20m", "FT8") {
+		t.Error("worked-but-unconfirmed must BE wanted when hunting unconfirmed too")
+	}
+	if gridIsWanted(conf, lookupGridScope("band_ftx"), "new_unconfirmed", "IO91", "20m", "FT8") {
+		t.Error("a confirmed square is finished under either hunt")
+	}
+}
+
+// A mode the scope cannot judge flags nothing rather than guessing: a phone
+// contact under an FTx scope is not evidence either way.
+func TestGridScopeIgnoresModesItCannotJudge(t *testing.T) {
+	i := idx(entry{"JN36", "20m", "FT8", false})
+	for _, mode := range []string{"SSB", "CW", ""} {
+		if gridIsWanted(i, lookupGridScope("band_ftx"), "new", "KO01", "20m", mode) {
+			t.Errorf("mode %q is outside an FTx scope — nothing should be flagged", mode)
+		}
+	}
+}
+
+// An unknown or unset scope falls back rather than answering "wanted" for
+// everything, which is what an empty class would have done.
+func TestGridScopeFallsBack(t *testing.T) {
+	if got := lookupGridScope("").Key; got != defaultGridScope {
+		t.Errorf("unset scope = %q, want the default %q", got, defaultGridScope)
+	}
+	if got := lookupGridScope("nonsense").Key; got != defaultGridScope {
+		t.Errorf("unknown scope = %q, want the default %q", got, defaultGridScope)
+	}
+	if got := gridHunt("nonsense"); got != "new" {
+		t.Errorf("unknown hunt = %q, want new", got)
+	}
+}
+
+// The two wanted states must be told apart, not merged. A square worked an hour
+// ago and awaiting a QSL is a different job from one never worked, and reporting
+// both as plain NEW GRID is what made a station the log plainly shows as worked
+// still wear the badge.
+func TestGridStateSeparatesNewFromUnconfirmed(t *testing.T) {
+	i := idx(
+		entry{"JN74", "20m", "FT8", false}, // worked, no confirmation yet
+		entry{"IO91", "20m", "FT8", true},  // worked and confirmed
+	)
+	s := lookupGridScope("band_ftx")
+
+	if got := gridStateFor(i, s, "new_unconfirmed", "KO99", "20m", "FT8"); got != gridStateNew {
+		t.Errorf("never worked → %q, want %q", got, gridStateNew)
+	}
+	if got := gridStateFor(i, s, "new_unconfirmed", "JN74", "20m", "FT8"); got != gridStateUnconf {
+		t.Errorf("worked but unconfirmed → %q, want %q", got, gridStateUnconf)
+	}
+	if got := gridStateFor(i, s, "new_unconfirmed", "IO91", "20m", "FT8"); got != "" {
+		t.Errorf("confirmed → %q, want nothing to chase", got)
+	}
+	// Under the plain "new" hunt an unconfirmed square is finished business.
+	if got := gridStateFor(i, s, "new", "JN74", "20m", "FT8"); got != "" {
+		t.Errorf("unconfirmed under the new-only hunt → %q, want nothing", got)
+	}
+}