The on-air list was ordered by log time, but a net controller needs the order
the mic goes around. The on-air grid now renders in a controller-owned order:
- A pinned "#" column numbers the round; header sorting is disabled on this
grid (new passOrder prop on RecentQSOsGrid) so a stray click can't reshuffle
it, and any previously-saved sort is stripped on restore.
- ⬆⬇ buttons move the selected station up/down the queue.
- New check-ins append to the end; logged/cancelled stations drop out; the
order is reconciled against the live session list and persisted per net
(localStorage opslog.netOrder.<id>), so a tab switch keeps the round.
- "Log & end" now auto-advances to the NEXT station in pass order.
The first RX-audio CW decoder decoded poorly on real signals (vs SDC) and was
removed in cafade0. This rebuilds the DSP core from scratch in
internal/cwdecode, keeping v1's good ideas (pitch lock, Flex cw_pitch
targeting, tiered acquisition) and fixing its proven failures:
- Two-way DEBOUNCE (pending-commit ~0.3 dit): v1 rejected short marks but not
short spaces, so a one-hop fade inside a dah shattered it into dits — the
single worst real-signal failure.
- Per-character BATCH dit/dah classification at flush time, using the batch's
own bimodal boundary — the first letter of an over decodes at any speed; the
timing clusters (muDit/muDah) are updated with the same attribution, killing
the classify-then-learn feedback spiral ("all dits at 60 WPM").
- dB-domain envelope with separate floor/peak trackers, hysteresis slicer,
span CAP (30 dB — else quiet backgrounds put the off-threshold in the
analysis-window skirts and letters merge) and window de-bias on durations.
- Double squelch: span >= 6 dB AND peak >= bank-median + 9.5 dB (span alone
cannot reject pure noise).
- Hamming-windowed Goertzel, 16 ms window / 5 ms hop (a 20 ms window left
40 WPM inter-element gaps with no envelope dip).
- Hardened acquisition (overlapping windows made "3 stable hops" meaningless)
plus SUPERVISED RE-LOCK: a clearly stronger tone on another pitch sustained
~1 s takes over — heals noise locks and follows a QSY.
- Gap-fed dit-length tracking (inter-element gaps are timing evidence too).
Proven by a synthetic-signal test suite (all passing): clean 12-40 WPM, three
pitches, added noise, QSB fading 0.35-1.0, 10 ms dropouts inside dahs, QRM in
auto and targeted modes, noise-only squelch, mid-over speed change 25->15 WPM,
and jittered hand keying (+/-20-25%, 3 seeds).
Wiring and UI restored from git (app_cw.go, Ear header button, decoded-text
strip with WPM/pitch/level + pitch lock + click-a-word-to-fill-callsign, Tools
menu entry) — strip strings translated (cwd.* i18n keys, EN/FR) this time.
The whole "Manipulateur CW" settings panel was hardcoded in English, so it
stayed English even with the app in French. Added ~35 wk.* keys (EN + FR) and
wired every label/checkbox/select/placeholder through t(). Also removed the long
serial-engine explanation paragraph as requested.
Confirmed from HB9HBY's log: ptt=true, yet the FT-891 dropped to RX between
words during a CQ macro — while the same SCU-17 works in N1MM. Root cause:
go.bug.st/serial drives DTR/RTS through GetCommState/SetCommState, which on the
SCU-17's Silicon Labs CP210x drops the asserted RTS (PTT) the moment DTR (CW)
is toggled. N1MM/WSJT use EscapeCommFunction, which sets one line without
disturbing the other.
OpsLog now drives the lines the same way: a new lineCtl abstraction with a
Windows implementation (linectl_windows.go) that opens the COM port via
CreateFile and toggles DTR/RTS with windows.EscapeCommFunction (SETDTR/CLRDTR/
SETRTS/CLRRTS). linectl_other.go keeps go.bug.st/serial for non-Windows builds.
The serial keyer holds a lineCtl instead of a serial.Port. RTS (PTT) now stays
asserted for the whole macro, so the rig holds TX between words.
Promotes golang.org/x/sys to a direct dependency.
Reported: on a CQ macro the rig drops to RX between words instead of holding TX
for the whole macro. Root cause is PTT not being held (usePTT off, or the RTS
PTT line not wired/honoured). Improvements:
- "Key PTT line" now defaults ON when the Serial engine is selected — without it
the rig runs on semi-break-in and drops between words.
- The serial keyer's line options (PTT, key line, invert, lead/tail, speed) are
now atomic and live-updatable: SaveWinkeyerSettings -> ApplySerialConfig applies
them from the next character, no reconnect needed.
- Each transmission logs its PTT state / key line / lead/tail, so a rig that
still won't hold TX can be diagnosed from the app log.
The macro itself is sent as one string (not fragmented), so PTT is genuinely
held across word gaps when usePTT is on — pending on-air confirmation via the log.
Opt-in (Settings → General). Shows a "MW #rank" pill next to the DXCC entity
name in the entry-strip band/slot matrix — ClubLog's Most Wanted ranking
(1 = most wanted), personalised to the operator's callsign and refreshed daily.
- internal/clublog/mostwanted.go: fetch mostwanted.php?api=1&callsign=<CALL>
(rank→DXCC JSON, real User-Agent), invert to dxcc→rank, cache to
<dataDir>/clublog_mostwanted.json; NeedsRefresh invalidates on callsign change.
- app.go: keyClublogMostWanted setting, a.clublogMW, startup refresh goroutine,
activeCallsign() helper, and Get/Set/Download bindings mirroring the cty ones.
WorkedBefore now carries MWRank (qso.WorkedBefore.MWRank) when enabled.
- BandSlotGrid.tsx: MW pill next to the entity name, colour-tiered by rank.
- SettingsModal General: toggle + download button + status, mirroring the
ClubLog cty-exceptions block.
Also reorganises the changelog: the theme-persistence fix (landed after the
v0.20.11 tag) plus this feature go under a new 0.20.12 entry; 0.20.11 keeps only
what shipped in its binary.
The settings store is backed by the LOCAL SQLite config DB (wired before the
slow remote-MySQL logbook connect), so the "not ready" window is the brief
startup gap before OnStartup builds the store, not a MySQL delay. Fix behaviour
is unchanged; only the comments and changelog wording are corrected.
An update can clear the WebView's localStorage; the theme is then restored from
the portable DB pref, but GetUIPref returned ("", nil) while the settings store
was still starting (indistinguishable from a genuinely-unset pref), so the
self-heal gave up after ~2.4s and fell back to the light default.
GetUIPref now returns an error when the settings store isn't wired yet, and the
theme self-heal treats that as "not ready → keep retrying" (up to ~36s) vs a
real empty answer ("unset → keep default"). A dark theme survives the relaunch.
Confirmed from an FT-891 CAT log: OpsLog tuned via OmniRig's SetSimplexMode,
which returned OK on every spot click but never moved the VFO (readback stayed
put), while SetMode on the same .ini worked — so the CAT link was healthy and
only the frequency write was a no-op. SetSimplexMode was chosen because Icoms
accept direct FreqA writes but don't move; Yaesu/Kenwood are the opposite.
Now, for non-Icom rigs (or if SetSimplexMode errors), also write the VFO
frequency property (FreqA/Freq) directly, which does move them. Icom keeps the
SetSimplexMode-only path so the Main/Sub VFO isn't nudged by a direct write.
Some CW interfaces key on the opposite line level (transmit at rest / key
backwards). New "Invert keying (active-LOW)" toggle flips the asserted level for
both the CW and PTT lines, and the idle state drives both lines to their
inactive level accordingly so an active-low rig isn't left keyed at rest.
Default off = N1MM convention (line HIGH = active).
Adds a 4th CW keyer engine alongside K1EL WinKeyer, Icom CI-V and Flex CWX:
OpsLog bit-bangs the Morse itself on a serial control line (DTR keys CW, RTS
keys PTT — swappable), the hardware-keying method N1MM/WSJT use with a Yaesu
SCU-17 and generic interfaces. No WinKeyer chip needed.
- internal/winkeyer/serialcw.go: serialKeyer — worker goroutine, morse table,
WPM + Farnsworth timing (live speed changes), abortable, PTT lead-in/tail/hang.
- winkeyer.Config gains Type ("k1el"|"serial") + CWKeyLine ("dtr"|"rts");
Manager routes Connect/Send/Stop/SetSpeed/Backspace/Disconnect to it.
- app.go: keyWKCWLine setting; WinkeyerConnect sets Type from the engine.
- Settings -> CW Keyer: new "Serial port (DTR=CW/RTS=PTT)" engine with COM port,
key-line selector, speed/Farnsworth/lead-in/tail/PTT. Macros, auto-CQ and
<LOGQSO> reuse the WinKeyer path unchanged.
UNTESTED on hardware (no SCU-17 to hand): polarity assumes N1MM convention
(line HIGH = active). Weight not yet honoured; Farnsworth is.
The rig's 0x27 waveform frames carry the same leading main-scope selector byte
as the dual-scope IC-7610/9700 (`27 00 00 <seq> <total> …`), but the code keyed
the layout off the CI-V address and treated the 7300 as selector-less, reading
the sequence from Data[1] (always 0x00) so every frame hit the `seq == 0`
guard and was dropped — blank scope. The waveform parser now detects the
leading selector byte from the frame itself (address-independent), and the
scope config/set commands (mode, span, edges) include the selector the 7300
requires. The IC-7610/9700 path is byte-for-byte unchanged (main → idx 2, sub
frames skipped). Confirmed against a real IC-7300 CI-V capture.
0.20.10 was released before the "closing OpsLog switches off the radio's own
scope" fix landed, so its entry is reattributed to 0.20.11 (the fix code is
already committed in 1668455).
SetScope(false) sent both 0x27 0x10 00 (scope DISPLAY off) and 0x27 0x11 00
(CI-V data output off), so quitting OpsLog blanked a local IC-7300's own scope
screen. Only the display-on (0x27 0x10 01) is now sent, and only on enable;
disable stops the CI-V stream alone and never touches the radio's display.
The multi-frame waveform header (USB path) read the second frequency field
as an absolute high edge, but in center mode it is a span — so high < low and
the panadapter had no valid range to map the trace onto (blank scope). It now
applies the same center+span vs low+high disambiguation the IC-7610 single-
frame path already used. FIXED mode was unaffected.
Also stamps changelog 0.20.10 with today's date.
- Station Control: the amplifier panel is now the exact same card as the FlexRadio panel (extracted shared AmpCard: OPERATE/STANDBY, ON/OFF, power level, output-power bar, live FWD/ID/temp meters). Every configured amp gets its own card — no dropdown.
- Help → "Send log to F4BPO" (only when SMTP is configured): e-mails opslog.log + previous session + crash log to the developer. New email.SendFiles for multi-attachment.
- Bulk edit: new "Frequency (MHz)" field sets freq_hz AND recomputes band; out-of-band values rejected. Fixes a run logged on a stale/default freq after CAT dropped.
- Cluster: Time column sorted lexically on the HHMMZ string, so spots after 0000Z sorted below 2359Z and looked frozen at the UTC rollover. Now sorts by real arrival time.
- Also folds in the DVK auto-CQ/2-column layout and Station Control dashboard batch (changelog 0.20.10, EN+FR).
Multi-amp: Settings->Amplifier becomes a list (amps.json, legacy single-amp keys auto-migrate to entry #1); one client per enabled amp with per-id bindings (GetAmplifiers/SaveAmplifiers/GetAmpStatuses/AmpOperate/AmpPower/AmpPowerLevel/AmpFanMode); legacy a.pgxl/a.spe/a.acom point at the first enabled amp of each family. Amp cards in FlexPanel and Station Control gain a dropdown to pick the amp; the status bar shows one clickable chip per amp. Use case: two SPEs run in parallel.
Flex v4 DSP (8000/Aurora): NRL/ANFL (lms_nr/lms_anf), NRS (speex_nr), NRF (nrf) with level sliders, RNN (rnnoise) and ANFT on/off — keys per the FlexLib slice docs; the section only shows when the radio reports these keys (dsp_v4 flag), so 6000-series panels are unchanged.
Embeds changelog.json (per-version EN + FR notes, curated from the release's
commits). GetWhatsNew compares the stored last-seen version with the running
build and returns the notes for every newer version, once, then advances the
marker. A dialog shows them in the UI language on the first launch after update.
Seeded with the 0.20.5 notes.
rouggy